Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Changes since the initial commit:
- Fix error message printing in llvm-profdata.
- Check errors in loadTestingFormat() + annotateAllFunctions().
- Defer error handling in InstrProfIterator to InstrProfReader.
- Remove the base ProfError class to work around an MSVC ICE.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 270020
Coverage mapping data is organized in a sequence of blocks, each of which is expected
to be aligned by 8 bytes. This feature is used when reading those blocks, see
VersionedCovMapFuncRecordReader::readFunctionRecords(). If a misaligned covearge
mapping data has more than one block, it causes llvm-cov to fail.
Differential Revision: http://reviews.llvm.org/D20285
llvm-svn: 269887
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Changes since the initial commit:
- Address undefined-var-template warning.
- Fix error message printing in llvm-profdata.
- Check errors in loadTestingFormat() + annotateAllFunctions().
- Defer error handling in InstrProfIterator to InstrProfReader.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 269694
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Changes since the initial commit:
- Fix error message printing in llvm-profdata.
- Check errors in loadTestingFormat() + annotateAllFunctions().
- Defer error handling in InstrProfIterator to InstrProfReader.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 269491
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 269462
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
llvm-svn: 265606
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Previously, we only expanded function and filename column widths when
rendering file reports. This commit makes the change for function
reports as well.
llvm-svn: 250900
Change the output of llvm-cov s.t it does not truncate function names
and file paths when printing coverage reports.
Differential Revision: http://reviews.llvm.org/D12647
rdar://22531141
llvm-svn: 247635
The reason we need to search by name rather than by Triple::ArchType
is to handle subarchitecture correclty. There is no different ArchType
for the x86_64h architecture (it identifies itself as x86_64), or for
the various ARM subarches. The only way to get to the subarch slice
in an universal binary is to search by name.
This issue led to hard to debug and transient symbolication failures
in Asan tests (it mostly works, because the files are very similar).
This also affects the Profiling infrastucture as it is the other user
of that API.
Reviewers: samsonov, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10604
llvm-svn: 240339
In r233132 we started requiring a subcommand in llvm-cov, but this
made `llvm-cov --version` invalid, which is kind of silly. Print
version information in this case, as most people would expect.
llvm-svn: 238897
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238602
llvm-cov was truncating numbers that were larger than a particular
fixed width, which is as confusing as it is useless. Instead, we use
engineering notation with SI prefix for magnitude.
llvm-svn: 237307
A while ago llvm-cov gained support for clang's instrumentation based
profiling in addition to its gcov support, and subcommands were added
to choose which behaviour to use. When no subcommand was specified, we
fell back to gcov compatibility with a warning that a subcommand would
be required in the future. Now, we require the subcommand.
Note that if the basename of llvm-cov is gcov (via symlink or
hardlink, for example), we still use the gcov compatible behaviour
with no subcommand required.
llvm-svn: 233132
This is an ugly hack to fix the configure --enable-shared build. It
turns out that *every cl::opt in LLVM* shows up in *every tool* in
that configuration, which is hopelessly broken. This skirts around the
issue by not colliding with another option's name, for now.
I've also simplified the option implementation - the other "color"
option used cl::boolOrDefault and was much nicer than what I'd written
before.
llvm-svn: 232704
The clang-hexagon elf bot was complaining that "Option 'color'
registered more than once!":
http://lab.llvm.org:8011/builders/clang-hexagon-elf/builds/24425
I don't understand why this error is happening, and I don't see it on
any other bots or on my own machine, so I'm kind of grasping at
straws. Try using an unscoped enum and specifying a cl::init to see if
they help.
llvm-svn: 232698
When multiple regions start on the same line, llvm-cov was just
showing the count of the last one as the line count. This can be
confusing and misleading for things like one-liner loops, where the
count at the end isn't very interesting, or even "if" statements with
an opening brace at the end of the line.
Instead, use the maximum of all of the region start counts.
llvm-svn: 230263
This code didn't really make sense as is. If a filename is passed in,
the user obviously wants the coverage *for that file*, not *for
everything*.
llvm-svn: 229217
PR22575 occurred because we were unsafely storing references into a
std::vector. If the vector moved because it grew, we'd be left
iterating through garbage memory. This avoids the issue by simplifying
the logic to gather coverage information as we go, rather than storing
it and iterating over it.
I'm relying on the existing tests showing that this is semantically
NFC, since it's difficult to hit the issue this fixes without
relatively large covered programs.
llvm-svn: 229215
utils/sort_includes.py.
I clearly haven't done this in a while, so more changed than usual. This
even uncovered a missing include from the InstrProf library that I've
added. No functionality changed here, just mechanical cleanup of the
include order.
llvm-svn: 225974
This teaches CoverageMapping::getCoveredFunctions to filter to a
particular file and uses that to replace most of the logic found in
llvm-cov report.
llvm-svn: 221962
The getBinary and getBuffer method now return ordinary pointers of appropriate
const-ness. Ownership is transferred by calling takeBinary(), which returns a
pair of the Binary and a MemoryBuffer.
llvm-svn: 221003
We're using cl::opt here, but for some reason we're reading out one
particular option by hand instead. This makes -help and the like
behave rather poorly, so let's not do it this way.
llvm-svn: 220928
There are two methods in SectionRef that can fail:
* getName: The index into the string table can be invalid.
* getContents: The section might point to invalid contents.
Every other method will always succeed and returning and std::error_code just
complicates the code. For example, a section can have an invalid alignment,
but if we are able to get to the section structure at all and create a
SectionRef, we will always be able to read that invalid alignment.
llvm-svn: 219314
This commit fixes llvm-cov's function coverage metric by using the number of executed functions instead of the number of fully covered functions.
Differential Revision: http://reviews.llvm.org/D5196
llvm-svn: 218672
This splits the logic for actually looking up coverage information
from the logic that displays it. These were tangled rather thoroughly
so this change is a bit large, but it mostly consists of moving things
around. The coverage lookup logic itself now lives in the library,
rather than being spread between the library and the tool.
llvm-svn: 218184
The filename-equivalence flag allows you to show coverage when your
source files don't have the same full paths as those that generated
the data. This is mostly useful for writing tests in a cross-platform
way.
This wasn't triggering in cases where the filename was derived
directly from the coverage data, which meant certain types of test
case were impossible to write. This patch fixes that, and following
patches involve tests that need this.
llvm-svn: 218108
- Replace std::unordered_map with DenseMap
- Use std::pair instead of manually combining two unsigneds
- Assert if insert is called with invalid arguments
- Avoid an unnecessary copy of a std::vector
llvm-svn: 218074
Vedant Kumar