As noted on PR46885, the number of mask elements should always be a power of 2, so to fix the static analyzer warning we are better off replacing the condition to <= 4, and I've added a pow2 assertion as well.
We already need to include raw_ostream.h, also add missing StringRef.h and cstdint implicit dependencies.
Remove unnecessary includes from PDBExtras.cpp
Since we're messing with individual element loads we need to expose this to show whats going on.
Part of the work to fix the masked_expandload.ll regressions in D66004
This allows us to remove extra patterns from AArch64SVEInstrInfo.td
because we can reuse those required for fixed length vectors.
Differential Revision: https://reviews.llvm.org/D85328
When any of the memrefs in a structured linalg op has a zero dimension, it becomes dead.
This is consistent with the fact that linalg ops deduce their loop bounds from their operands.
Note however that this is not the case for the `tensor<0xelt_type>` which is a special convention
that must be lowered away into either `memref<elt_type>` or just `elt_type` before this
canonicalization can kick in.
Differential Revision: https://reviews.llvm.org/D85413
NOTE: Also uses SVE code generation for NEON size vectors, instead
of expanding i64 based vector multiplications.
Differential Revision: https://reviews.llvm.org/D85327
The RewritePattern will become one of several, and will be part of the LLVM conversion pass (instead of a separate pass following LLVM conversion).
Reviewed By: herhut
Differential Revision: https://reviews.llvm.org/D84946
Before the patch `SATest compare`, produced quite obscure results
when something about the diagnostic have changed (i.e. its description
or the name of the corresponding checker) because it was simply two
lists of warnings, ADDED and REMOVED. It was up to the developer
to match those warnings, understand that they are essentially the
same, and figure out what caused the difference.
This patch introduces another category of results: MODIFIED.
It tries to match new warnings against the old ones and prints out
clues on what is different between two builds.
Differential Revision: https://reviews.llvm.org/D85311
The dsymutil/X86/reproducer.test test could create paths
longer than MAX_PATH:
C:\ps4-buildslave2\llvm-clang-x86_64-expensive-checks-win
\build\test\tools\dsymutil\X86\Output\reproducer.test.tmp.repro
\ps4-buildslave2\llvm-clang-x86_64-expensive-checks-win\build
\test\tools\dsymutil\X86\Output\reproducer.test.tmp\Inputs\
basic1.macho.x86_64.o
Disable this test on windows.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D85294
This is a simple patch that folds freeze(undef) into a proper constant after inspecting its uses.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D84948
Arm MVE has multiple instructions such as VMLAVA.s8, which (in this
case) can take two 128bit vectors, sign extend the inputs to i32,
multiplying them together and sum the result into a 32bit general
purpose register. So taking 16 i8's as inputs, they can multiply and
accumulate the result into a single i32 without any rounding/truncating
along the way. There are also reduction instructions for plain integer
add and min/max, and operations that sum into a pair of 32bit registers
together treated as a 64bit integer (even though MVE does not have a
plain 64bit addition instruction). So giving the vectorizer the ability
to use these instructions both enables us to vectorize at higher
bitwidths, and to vectorize things we previously could not.
In order to do that we need a way to represent that the reduction
operation, specified with a llvm.experimental.vector.reduce when
vectorizing for Arm, occurs inside the loop not after it like most
reductions. This patch attempts to do that, teaching the vectorizer
about in-loop reductions. It does this through a vplan recipe
representing the reductions that the original chain of reduction
operations is replaced by. Cost modelling is currently just done through
a prefersInloopReduction TTI hook (which follows in a later patch).
Differential Revision: https://reviews.llvm.org/D75069
Historical modeling of the LLVM dialect types had been wrapping LLVM IR types
and therefore needed access to the instance of LLVMContext stored in the
LLVMDialect. The new modeling does not rely on that and only needs the
MLIRContext that is used for uniquing, similarly to other MLIR types. Change
LLVMType::get<Kind>Ty functions to take `MLIRContext *` instead of
`LLVMDialect *` as first argument. This brings the code base closer to
completely removing the dependence on LLVMContext from the LLVMDialect,
together with additional support for thread-safety of its use.
Depends On D85371
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D85372
This prepares for the removal of llvm::Module and LLVMContext from the
mlir::LLVMDialect.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D85371
`ninja check-all` currently fails on Illumos:
[84/716] Generating default/Asan-i386-inline-Test
FAILED: projects/compiler-rt/lib/asan/tests/default/Asan-i386-inline-Test
cd /var/llvm/dist-amd64-release/projects/compiler-rt/lib/asan/tests && /var/llvm/dist-amd64-release/./bin/clang ASAN_INST_TEST_OBJECTS.gtest-all.cc.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_globals_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_interface_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_internal_interface_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_oob_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_mem_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_str_test.cpp.i386-inline.o ASAN_INST_TEST_OBJECTS.asan_test_main.cpp.i386-inline.o -o /var/llvm/dist-amd64-release/projects/compiler-rt/lib/asan/tests/default/./Asan-i386-inline-Test -g --driver-mode=g++ -fsanitize=address -m32
ld: fatal: unrecognized option '--no-as-needed'
ld: fatal: use the -z help option for usage information
clang-11: error: linker command failed with exit code 1 (use -v to see invocation)
`clang` unconditionally passes `--as-needed`/`--no-as-needed` to the
linker. This works on Solaris 11.[34] which added a couple of option
aliases to the native linker to improve compatibility with GNU `ld`.
Illumos `ld` didn't do this, so one needs to use the corresponding
native options `-z ignore`/`-z record` instead.
Because this works on both Solaris and Illumos, the current patch always
passes the native options on Solaris. This isn't fully correct, however:
when using GNU `ld` on Solaris (not yet supported; I'm working on that),
one still needs `--as-needed` instead.
I'm hardcoding this decision because a generic detection via a `cmake` test
is hard: many systems have their own implementation of `getDefaultLinker`
and `cmake` would have to duplicate the information encoded there.
Besides, it would still break when `-fuse-ld` is used.
Tested on `amd64-pc-solaris2.11` (Solaris 11.4 and OpenIndiana 2020.04),
`sparcv9-sun-solaris2.11`, and `x86_64-pc-linux-gnu`.
Differential Revision: https://reviews.llvm.org/D84412
Unit.Format, Unit.Version and Unit.AddrSize are replaced with
dwarf::FormParams in D84496 to get rid of unnecessary functions
getOffsetSize() and getRefSize(). However, that change makes it
difficult to make AddrSize optional (Optional<uint8_t>). This change
pulls out dwarf::FormParams from DWARFYAML::Unit and use it as a helper
struct in DWARFYAML::emitDebugInfo().
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D85296
Running ninja check-sanitizer fails for after that patch (commit
058f5f6fd8) with the following error:
libRTSanitizerCommon.test.nolibc.x86_64.a(sanitizer_posix.cpp.o): In
function `__sanitizer::GetNamedMappingFd(char const*, unsigned long,
int*)':
..../llvm-project/compiler-rt/lib/sanitizer_common/sanitizer_posix.cpp:358:
undefined reference to `fcntl'
clang-12: error: linker command failed with exit code 1 (use -v to see
invocation)
This patch works around the problem by only calling fcntl if O_CLOEXEC
is not defined.
Reviewed By: plopresti
Differential Revision: https://reviews.llvm.org/D85114
Failing test output sometimes contains control characters like \x1b (e.g.
if there was some -fcolor-diagnostics output) which are not allowed inside
XML files. This causes problems with CI systems: for example, the Jenkins
JUnit XML will throw an exception when ecountering those characters and
similar problems also occur with GitLab CI.
Reviewed By: yln, jdenny
Differential Revision: https://reviews.llvm.org/D84233
When the FreeBSD qsort() implementation recurses, it does so using an
interposable function call, so we end up calling the interceptor again
and set the saved comparator to wrapped_qsort_compar. This results in an
infinite loop and a eventually a stack overflow since wrapped_qsort_compar
ends up calling itself. This means that ASAN is completely broken on
FreeBSD for programs that call qsort(). I found this while running
check-all on a FreeBSD system a ASAN-instrumented LLVM.
Fix this by checking whether we are recursing inside qsort before writing
to qsort_compar. The same bug exists in the qsort_r interceptor, so use the
same approach there. I did not test the latter since the qsort_r function
signature does not match and therefore it's not intercepted on FreeBSD/macOS.
Fixes https://llvm.org/PR46832
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D84509
Use the same functionality as the non-gui mode, the colors just
need translating to curses colors.
Differential Revision: https://reviews.llvm.org/D85145
Without this, sources with long lines or variable names may overwrite
panel frames, or even overrun to the following line. There's currently
no way to scroll left/right in the views, so that should be added
to handle these cases.
This commit includes fixing constness of some Window functions,
and also makes PutCStringTruncated() consistent with the added
printf-like variant to take the padding as the first argument (can't
add it after the format to the printf-like function).
Differential Revision: https://reviews.llvm.org/D85123
These might occur in seemingly generic assembly. Previously when
targeting COFF, they were silently ignored, which certainly won't
give the right result. Instead clearly error out, to make it clear
that the assembly needs to be adjusted for this target.
Also change a preexisting report_fatal_error into a proper error
message, pointing out the offending source instruction. This isn't
strictly an internal error, as it can be triggered by user input.
Differential Revision: https://reviews.llvm.org/D85242
We need to have special handling of i128 div/rem on Windows due
to a weird calling convention needed for the libcall. There was
also some code that made it look like we do the same for sdivrem/udiv,
but the code didn't account for multiple return values of those
functions so couldn't possibly work. I think this code never
triggers because we don't have libcall names defined for those
functions by default so DAGCombine never creates DIVREM nodes.
Correctly sign extend the addend, and fix implicit shift operand decoding
(it incorrectly returned 0 for some cases), and check that the initial
encoded immediate is 0.
Currently, the skipIfRosetta decorator will skip tests with the message
"not on macOS" on all platforms that are not `darwin` or `macosx`.
Instead, it should only check the platform and architecture when running
on these platforms.
This triggers for example when running the test suite on device.
Differential revision: https://reviews.llvm.org/D85388
Muhammad Omair Javaid