The `ap` suffix is a remnant of lldb's former use of auto pointers,
before they got deprecated. Although all their uses were replaced by
unique pointers, some variables still carried the suffix.
In r353795 I removed another auto_ptr remnant, namely redundant calls to
::get for unique_pointers. Jim justly noted that this is a good
opportunity to clean up the variable names as well.
I went over all the changes to ensure my find-and-replace didn't have
any undesired side-effects. I hope I didn't miss any, but if you end up
at this commit doing a git blame on a weirdly named variable, please
know that the change was unintentional.
llvm-svn: 353912
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
These are general purpose "utility" classes, whose functionality is not
debugger-specific in any way. As such, I believe they belong in the
Utility module.
This doesn't break any particular dependency (yet), but it reduces the
number of Core dependencies across the board.
Reviewers: zturner, jingham, teemperor, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D55361
llvm-svn: 349157
This patch changes the way the reproducer is initialized. Rather than
making changes at run time we now do everything at initialization time.
To make this happen we had to introduce initializer options and their SB
variant. This allows us to tell the initializer that we're running in
reproducer capture/replay mode.
Because of this change we also had to alter our testing strategy. We
cannot reinitialize LLDB when using the dotest infrastructure. Instead
we use lit and invoke two instances of the driver.
Another consequence is that we can no longer enable capture or replay
through commands. This was bound to go away form the beginning, but I
had something in mind where you could enable/disable specific providers.
However this seems like it adds very little value right now so the
corresponding commands were removed.
Finally this change also means you now have to control this through the
driver, for which I replaced --reproducer with --capture and --replay to
differentiate between the two modes.
Differential revision: https://reviews.llvm.org/D55038
llvm-svn: 348152
When I landed the initial reproducer framework I knew there were some
things that needed improvement. Rather than bundling it with a patch
that adds more functionality I split it off into this patch. I also
think the API is stable enough to add unit testing, which is included in
this patch as well.
Other improvements include:
- Refactor how we initialize the loader and generator.
- Improve naming consistency: capture and replay seems the least ambiguous.
- Index providers by name and make sure there's only one of each.
- Add convenience methods for creating and accessing providers.
Differential revision: https://reviews.llvm.org/D54616
llvm-svn: 347716
After committing the initial reproducer feature I noticed a few small
issues which warranted addressing here. It fixes incorrect documentation
in the command object and extract some duplicated code into the debugger
object.
llvm-svn: 346919
This patch removes the comments following the header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
Differential revision: https://reviews.llvm.org/D54385
llvm-svn: 346625
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
This patch moves the EnumerateDirectory functionality and related enum
and typedef from FileSpec to FileSystem.
This is part of a set of patches that extracts file system related
convenience methods from FileSpec. The long term goal is to remove this
method altogether and use the iterators directly, but for introducing
the VFS into LLDB this change is sufficient.
Differential revision: https://reviews.llvm.org/D53785
llvm-svn: 345800
This patch teaches lldb to detect when there are missing frames in a
backtrace due to a sequence of tail calls, and to fill in the backtrace
with artificial tail call frames when this happens. This is only done
when the execution history can be determined from the call graph and
from the return PC addresses of calls on the stack. Ambiguous sequences
of tail calls (e.g anything involving tail calls and recursion) are
detected and ignored.
Depends on D49887.
Differential Revision: https://reviews.llvm.org/D50478
llvm-svn: 343900
Summary:
Previously we SetUseColor(true) wrongly when output was not a terminal so it broken some (not public) bots.
Thanks for issue report, @stella.stamenova
Reviewers: stella.stamenova, zturner
Reviewed By: stella.stamenova
Subscribers: abidh, lldb-commits, stella.stamenova
Differential Revision: https://reviews.llvm.org/D51772
llvm-svn: 341746
This patch allows LLDB to print column info in backtraces et al. if
available, which is useful when the backtrace contains a frame like
the following:
f(can_crash(0), can_crash(1));
Differential Revision: https://reviews.llvm.org/D51661
llvm-svn: 341506
Summary:
The syntax highlighting feature so far is mutually exclusive with the lldb feature
that marks the current column in the line by underlining it via an ANSI color code.
Meaning that if you enable one, the other is automatically disabled by LLDB.
This was caused by the fact that both features inserted color codes into the the
source code and were likely to interfere with each other (which would result
in a broken source code printout to the user).
This patch moves the cursor code into the highlighting framework, which provides
the same feature to the user in normal non-C source code. For any source code
that is highlighted by Clang, we now also have cursor marking for the whole token
that is under the current source location. E.g., before we underlined only the '!' in the
expression '1 != 2', but now the whole token '!=' is underlined. The same for function
calls and so on. Below you can see two examples where we before only underlined
the first character of the token, but now underline the whole token.
{F7075400}
{F7075414}
It also simplifies the DisplaySourceLines method in the SourceManager as most of
the code in there was essentially just for getting this column marker to work as
a FormatEntity.
Reviewers: aprantl
Reviewed By: aprantl
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D51466
llvm-svn: 341003
Summary:
D48465 is currently blocked by the fact that tab-completing the first expression is deadlocking LLDB.
The reason for this deadlock is that when we push the ProcessIO handler for reading the Objective-C runtime
information from the executable (which is triggered when we parse the an expression for the first time),
the IOHandler can't be pushed as the Editline::Cancel method is deadlocking.
The deadlock in Editline is coming from the m_output_mutex, which is locked before we go into tab completion.
Even without this lock, calling Cancel on Editline will mean that Editline cleans up behind itself and deletes the
current user-input, which is screws up the console when we are tab-completing at the same time.
I think for now the most reasonable way of fixing this is to just not call Cancel on the current IOHandler when we push
the IOHandler for running an internal utility function.
As we can't really write unit tests for IOHandler itself (due to the hard dependency on an initialized Debugger including
all its global state) and Editline completion is currently also not really testable in an automatic fashion, the test for this has
to be that the expression command completion in D48465 doesn't fail when requesting completion the first time.
A more precise test plan for this is:
1. Apply D48465.
2. Start lldb and break in some function.
3. Type `expr foo` and press tab to request completion.
4. Without this patch, we deadlock and LLDB stops responding.
I'll provide an actual unit test for this once I got around and made the IOHandler code testable,
but for now unblocking D48465 is more critical.
Thanks to Jim for helping me debugging this.
Reviewers: jingham
Reviewed By: jingham
Subscribers: emaste, clayborg, abidh, lldb-commits
Differential Revision: https://reviews.llvm.org/D50912
llvm-svn: 340988
Summary:
LLDB currently only checks the output terminal for color support by looking
at the `TERM` environment variable and comparing it to `"dumb"`. This causes that
when running LLDB on a CI node, the syntax highlighter will not be deactivated by
LLDB and the output log is filled with color codes (unless the terminal emulator
actually exposes itself as dumb).
This patch now relies on the LLVM code for detecting color support which is more
reliable. We now also correctly actually initialize the `m_supports_colors` variable in `File`.
`m_supports_colors` was so far uninitialized, but the code path that uses `m_supports_colors`
was also dead so the sanitizers didn't sound an alarm.
The old check that compares `TERM` is not removed by this patch as the new LLVM code
doesn't seem to handle this case (and it's a good thing to check for "dumb" terminals).
Reviewers: aprantl, javed.absar
Reviewed By: aprantl
Subscribers: kristof.beyls, abidh, lldb-commits
Differential Revision: https://reviews.llvm.org/D51243
llvm-svn: 340747
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
Summary:
This patch adds syntax highlighting support to LLDB. When enabled (and lldb is allowed
to use colors), printed source code is annotated with the ANSI color escape sequences.
So far we have only one highlighter which is based on Clang and is responsible for all
languages that are supported by Clang. It essentially just runs the raw lexer over the input
and then surrounds the specific tokens with the configured escape sequences.
Reviewers: zturner, davide
Reviewed By: davide
Subscribers: labath, teemperor, llvm-commits, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D49334
llvm-svn: 338662
Summary:
Instead of a function taking an enum value determining which path to
return, we now have a suite of functions, each returning a single path
kind. This makes it easy to move the python-path function into a
specific plugin in a follow-up commit.
All the users of GetLLDBPath were converted to call specific functions
instead. Most of them were hard-coding the enum value anyway, so this
conversion was simple. The only exception was SBHostOS, which I've
changed to use a switch on the incoming enum value.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D48272
llvm-svn: 335052
With the recent changes in FileSpec to use LLVM's path style, it is
possible to delegate a bunch of common path operations to LLVM's path
helpers. This means we only have to maintain a single implementation and
at the same time can benefit from the efforts made by the rest of the
LLVM community.
This is part one of a set of patches. There was no obvious way to split
this so I just worked from top to bottom.
Differential revision: https://reviews.llvm.org/D48084
llvm-svn: 334615
This breaks the OpenFlags enumeration into two separate
enumerations: OpenFlags and CreationDisposition. The first
controls the behavior of the API depending on whether or not
the target file already exists, and is not a flags-based
enum. The second controls more flags-like values.
This yields a more easy to understand API, while also allowing
flags to be passed to the openForRead api, where most of the
values didn't make sense before. This also makes the apis more
testable as it becomes easy to enumerate all the configurations
which make sense, so I've added many new tests to exercise all
the different values.
llvm-svn: 334221
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
llvm-svn: 329697
I want to extend the properties on ModuleList to also contain other
more general settings and renaming the settings category to symbols
seems to be the least bad of choices.
llvm-svn: 327193
It turns out that setting the clang module cache after LLDB has a
Target can be too late. In particular, the Swift language plugin needs
to know the setting without having access to a Target. This patch
moves the setting into the *LLDB* module cache, where it is a global
setting that is available before any Target is created and more
importantly, is shared between all Targets.
rdar://problem/37944432
Differential Revision: https://reviews.llvm.org/D43984
llvm-svn: 326628
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D39128
<rdar://problem/34870417>
llvm-svn: 317182
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D38829
llvm-svn: 317180
This patch adds support for passing an arbitrary python stream
(anything inheriting from IOBase) to SetOutputFileHandle or
SetErrorFileHandle.
Differential revision: https://reviews.llvm.org/D38829
<rdar://problem/34870417>
llvm-svn: 315966
The core of this change is the new CommandInterpreter::m_command_state,
which models the state transitions for interactive commands, including
an "interrupted" state transition.
In general, command interruption requires cooperation from the code
executing the command, which needs to poll for interruption requests
through CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs
was likely the longest blocking part.
(ex. target modules dump symtab on a complex binary could take 10+ minutes)
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 315037
The core of this change is the new CommandInterpreter::m_command_state, which
models the state transitions for interactive commands, including an
"interrupted" state transition.
In general, command interruption requires cooperation from the code executing
the command, which needs to poll for interruption requests through
CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs was
likely the longest blocking part. (ex. target modules dump symtab on a
complex binary could take 10+ minutes)
patch by lemo
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 313904
This patch introduces a new thread backtrace command "unique".
The command is based off of "thread backtrace all" but will instead
find all threads which share matching call stacks and de-duplicate
their output, listing call stack and all the threads which share it.
This is especially useful for apps which use thread/task pools
sitting around waiting for work and cause excessive duplicate output.
I needed this behavior recently when debugging a core with 700+ threads.
Differential Revision: https://reviews.llvm.org/D33426
Reviewers: clayborg, jingham
Patch by Brian Gianforcaro <b.gianfo@gmail.com>
llvm-svn: 305197
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
This adjusts header file includes for headers and source files
in Core. In doing so, one dependency cycle is eliminated
because all the includes from Core to that project were dead
includes anyway. In places where some files in other projects
were only compiling due to a transitive include from another
header, fixups have been made so that those files also include
the header they need. Tested on Windows and Linux, and plan
to address failures on OSX and FreeBSD after watching the
bots.
llvm-svn: 299714
Summary:
previously we switched to llvm streams for log output, this completes
the switch for the error streams.
I also clean up the includes and remove the unused argument from
DisableAllLogChannels().
This required adding a bit of boiler plate to convert the output in the
command interpreter, but that should go away when we switch command
results to use llvm streams as well.
Reviewers: zturner, eugene
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D30894
llvm-svn: 297812
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
this reverts r297116 because it breaks the unittests and
TestCompDirSymlink. The ModuleCache unit test is trivially fixable, but
the CompDirSymlink failure is a symptom of a deeper problem: llvm's stat
functionality is not a drop-in replacement for lldb's. The former is
based on stat(2) (which does symlink resolution), while the latter is
based on lstat(2) (which does not).
This also reverts subsequent build fixes (r297128, r297120, 297117) and
r297119 (Remove FileSpec dependency on FileSystem) which builds on top
of this.
llvm-svn: 297139
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
Summary:
Use StringRef and ArrayRef where possible. This adds an accessor to the
Args class to get a view of the arguments as ArrayRef<const char *>.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30402
llvm-svn: 296592
Summary:
This converts LLDB's logging to use llvm streams instead of
lldb_private::Stream and friends. The changes are mostly
straight-forward and amount to s/lldb_private::Stream/llvm::raw_ostream.
The part worth calling out is the rewrite of the StreamCallback class.
Previously this class contained a per-thread buffer of data written. I
assume this had something to do with it trying to make sure each log
line is delivered as a single event, instead of multiple (possibly
interleaved) events. However, this is no longer relevant as the Log
class already writes things to a temporary buffer and then delivers the
message as a single "write", so I have just removed the code in
question.
Reviewers: zturner, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29615
llvm-svn: 294736
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
header line, backtrace output) was to remove the current pc value
from frames where we have source level information. We've been
discussing this for the past week and based on input from a group
of low level users, I believe this is the wrong default behavior
for the command line lldb tool.
lldb's backtrace will include the pc value for all stack frames
regardless of whether they have source level debug information or
not.
A related part of r286288 removes the byte offset printing for
functions with source level information (e.g. "main + 22 sourcefile.c:10"
is printed as "main sourcefile.c:10"). I don't see a compelling
case for changing this part of 286288 so I'm leaving that as-is
(in addition to the rest of 286288 which is clearly better than
the previous output style).
<rdar://problem/30083904>
llvm-svn: 293366
Summary:
Communication classes use the Timeout<> class to specify the timeout. Listener
class was converted to chrono some time ago, but it used a different meaning for
a timeout of zero (Listener: infinite wait, Communication: no wait). Instead,
Listener provided separate functions which performed a non-blocking event read.
This converts the Listener class to the new Timeout class, to improve
consistency. It also allows us to get merge the different GetNextEvent*** and
WaitForEvent*** functions into one. No functional change intended.
Reviewers: jingham, clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D27136
llvm-svn: 288238
This was a bit tricky, especially for things like
OptionValueArray and OptionValueDictionary since they do some
funky string parsing. Rather than try to re-write line-by-line
I tried to make the StringRef usage idiomatic, even though
it meant often re-writing from scratch large blocks of code
in a different way while keeping true to the original intent.
The finished code is a big improvement though, and often much
shorter than the original code. All tests and unit tests
pass on Windows and Linux.
llvm-svn: 287242
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
I added a "thread-stop-format" to distinguish between the form
that is just the thread info (since the stop printing immediately prints
the frame info) and one with more frame 0 info - which is useful for
"thread list" and the like.
I also added a frame.no-debug boolean to the format entities so you can
print frame information differently between frames with source info and those
without.
This closes https://reviews.llvm.org/D26383.
<rdar://problem/28273697>
llvm-svn: 286288
This change introduces optional marking of the column within a source
line where a thread is stopped. This marking will show up when the
source code for a thread stop is displayed, when the debug info
knows the column information, and if the optional column marking is
enabled.
There are two separate methods for handling the marking of the stop
column:
* via ANSI terminal codes, which are added inline to the source line
display. The default ANSI mark-up is to underline the column.
* via a pure text-based caret that is added in the appropriate column
in a newly-inserted blank line underneath the source line in
question.
There are some new options that control how this all works.
* settings set stop-show-column
This takes one of 4 values:
* ansi-or-caret: use the ANSI terminal code mechanism if LLDB
is running with color enabled; if not, use the caret-based,
pure text method (see the "caret" mode below).
* ansi: only use the ANSI terminal code mechanism to highlight
the stop line. If LLDB is running with color disabled, no
stop column marking will occur.
* caret: only use the pure text caret method, which introduces
a newly-inserted line underneath the current line, where
the only character in the new line is a caret that highlights
the stop column in question.
* none: no stop column marking will be attempted.
* settings set stop-show-column-ansi-prefix
This is a text format that indicates the ANSI formatting
code to insert into the stream immediately preceding the
column where the stop column character will be marked up.
It defaults to ${ansi.underline}; however, it can contain
any valid LLDB format codes, e.g.
${ansi.fg.red}${ansi.bold}${ansi.underline}
* settings set stop-show-column-ansi-suffix
This is the text format that specifies the ANSI terminal
codes to end the markup that was started with the prefix
described above. It defaults to: ${ansi.normal}. This
should be sufficient for the common cases.
Significant leg-work was done by Adrian Prantl. (Thanks, Adrian!)
differential review: https://reviews.llvm.org/D20835
reviewers: clayborg, jingham
llvm-svn: 282105
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
Take 2, with missing cmake line fixed. Build tested on
Ubuntu 14.04 with clang-3.6.
See docs/structured_data/StructuredDataPlugins.md for details.
differential review: https://reviews.llvm.org/D22976
reviewers: clayborg, jingham
llvm-svn: 279202
This finally removes the use of the Mutex and Condition classes. This is an
intricate patch as the Mutex and Condition classes were tied together.
Furthermore, many places had slightly differing uses of time values. Convert
timeout values to relative everywhere to permit the use of
std::chrono::duration, which is required for the use of
std::condition_variable's timeout. Adjust all Condition and related Mutex
classes over to std::{,recursive_}mutex and std::condition_variable.
This change primarily comes at the cost of breaking the TracingMutex which was
based around the Mutex class. It would be possible to write a wrapper to
provide similar functionality, but that is beyond the scope of this change.
llvm-svn: 277011
The issue was we have two global variables: one that contains a DebuggerList pointer and one that contains a std::mutex pointer. These get initialized in Debugger::Initialize(), and everywhere that uses these does:
if (g_debugger_list_ptr && g_debugger_list_mutex_ptr)
{
std::lock_guard<std::recursive_mutex> guard(*g_debugger_list_mutex_ptr);
// do work while mutex is locked
}
Debugger::Terminate() was deleting and nulling out g_debugger_list_ptr which meant we had a race condition where someone might do the if statement and it evaluates to true, then another thread calls Debugger::Terminate() and deletes and nulls out g_debugger_list_ptr while holding the mutex, and another thread then locks the mutex and tries to use g_debugger_list_ptr. The fix is to just not delete and null out the g_debugger_list_ptr variable.
llvm-svn: 275119
If users call "static void lldb::SBDebugger::Terminate()" we will clean up the debugger list, and users can individually destroy debugger instances with "static void lldb::SBDebugger::Destroy(SBDebugger &)". But if we let the C++ destructor chain tear down this list, other threads that might still be running as the main thread exits can now crash if they access the debugger list. We stop this by leaking the debugger list and its mutex.
<rdar://problem/26372169>
llvm-svn: 270869
This is a pretty straightforward first pass over removing a number of uses of
Mutex in favor of std::mutex or std::recursive_mutex. The problem is that there
are interfaces which take Mutex::Locker & to lock internal locks. This patch
cleans up most of the easy cases. The only non-trivial change is in
CommandObjectTarget.cpp where a Mutex::Locker was split into two.
llvm-svn: 269877
We don't want a mutex in debugger as it will cause A/B locking issues with the lldb_private::Target's mutex, but we do need to stop two threads from doing Debugger::Clear at the same time. We have seen issues with this with the C++ global destructor chain where the global debugger list is being destroyed and the Debugger::~Debugger() is calling it while another thread was in the middle of running that function.
<rdar://problem/26098913>
llvm-svn: 268563
to each other. This should remove some infrequent teardown crashes when the
listener is not the debugger's listener.
Processes now need to take a ListenerSP, not a Listener&.
This required changing over the Process plugin class constructors to take a ListenerSP, instead
of a Listener&. Other than that there should be no functional change.
<rdar://problem/24580184> CrashTracer: [USER] Xcode at …ework: lldb_private::Listener::BroadcasterWillDestruct + 39
llvm-svn: 262863
Before, in the absence of any configured REPLs, LLDB would act as if there were
multiple possible REPL options, whereas actually no REPL language is supported.
Now we make a better error.
llvm-svn: 250931
This makes LLDB launch and create a REPL, specifying no target so that the REPL
can create one for itself. Also added the "--repl-language" option, which
specifies the language to use. Plumbed the relevant arguments and errors
through the REPL creation mechanism.
llvm-svn: 250773
A REPL takes over the command line and typically treats input as source code.
REPLs can also do code completion. The REPL class allows its subclasses to
implement the language-specific functionality without having to know about the
IOHandler-specific internals.
Also added a PluginManager-based way of getting to a REPL given a language and
a target.
Also brought in some utility code and expression options that are useful for
REPLs, such as line offsets for expressions, ANSI terminal coloring of errors,
and a few IOHandler convenience functions.
llvm-svn: 250753
Summary:
With the recent changes to separate clang from the core structures
of LLDB, many inclusions of clang headers can be removed.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12954
llvm-svn: 248004
debugging optimized code. Adds new methods on Function/SBFunction
to query whether a given function is optimized. Adds a new
function.is-optimized format entity and changes the default
frame-format to append "[opt]" if the function was built with
optimization.
The only indication that a binary was built with optimization
that we have right now is the presence of the DW_AT_APPLE_optimized
attribute (DW_FORM_flag value 1) in the DW_TAG_compile_unit.
The absence of this flag may mean that the compile_unit was not
compiled with optimization, or it may mean that the producer
does not generate this attribute.
Currently this only works for dSYM debugging. When we create
the CompileUnit with dwarf-in-.o-file debugging we don't have
the attribute value yet so it's not set. I need to find the
flag value when we do start to read the .o file DWARF and
set the CompileUnit's status at that point - but haven't
done it yet.
I'm also going to add a mechanism for issuing warnings to users
such that they're only issued once in a debug session and
there is away for users to suppress these warnings altogether
via .lldbinit file settings. But I want to get this changeset
committed now that it's at a useful state.
<rdar://problem/19281172>
llvm-svn: 243508
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
This change also get rid of an unused Debugger instance in
GDBRemoteCommunicationServerLLGS and the command interpreter from
lldb-platform what was used only for enabling logging.
Differential revision: http://reviews.llvm.org/D9876
llvm-svn: 238319
Summary:
There is an issue in lldb where the command prompt can appear at the wrong time. The partial fix
we have in for this is not working all the time and is introducing unnecessary delays. This
change does:
- Change Process:SyncIOHandler to use integer start id's for synchronization to avoid it being
confused by quick start-stop cycles. I picked this up from a suggested patch by Greg to
lldb-dev.
- coordinates printing of asynchronous text with the iohandlers. This is also based on a
(different) Greg's patch, but I have added stronger synchronization to it to avoid races.
Together, these changes solve the prompt problem for me on linux (both with and without libedit).
I think they should behave similarly on Mac and FreeBSD and I think they will not make matters
worse for windows.
Test Plan: Prompt comes out alright. All tests still pass on linux.
Reviewers: clayborg, emaste, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9823
llvm-svn: 238313
Summary:
Previously the Debugger::HandleProcessEvent hid a top IOHandler if the
process's IOHandler was inactive and later refreshed it. Usually the
IOHandler.Refresh() prints the (lldb) prompt. The problem was in case of
iOS remote platform when trying to execute 'command source' command.
On this platform the process's IOHandler is empty, therefore the
Debugger::HandleProcessEvent hid a top IOHandler and later refreshed it.
So that the (lldb) prompt was printed with a program output in mixed
order:
was:
```
longlonglonglonglonglonglonglonglonglonglonglonglonglonglonglonglonglong
longlonglonglonglonglonglonglonglonglonglonglonglonglonglon(lldb)
glonglonglonglonglonglonglonglonglonglonglonglong string
```
now:
```
longlonglonglonglonglonglonglonglonglonglonglonglonglonglonglonglonglong
longlonglonglonglonglonglonglonglonglonglonglonglonglonglonglonglonglong
longlonglonglonglonglonglonglonglong string
```
Reviewers: zturner, jingham, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, jingham, zturner, clayborg
Differential Revision: http://reviews.llvm.org/D8929
llvm-svn: 234517
In an effort to reduce binary size for components not wishing to
link against all of LLDB, as well as a parallel effort to reduce
link dependencies on Python, this patch splits out the notion of
LLDB initialization into "full" and "common" initialization.
All code related to initializing the full LLDB suite lives directly
in API now. Previously it was only referenced from API, but because
it was defined in lldbCore, it would get implicitly linked against
by everything including lldb-server, causing a considerable
increase in binary size.
By moving this to the API layer, it also creates a better layering
for the ongoing effort to make the embedded interpreter replacable
with one from a different language (or even be completely removeable).
One semantic change necessary to get this all working was to remove
the notion of a shared debugger refcount. The debugger is either
initialized or uninitialized now, and calling Initialize() multiple
times will simply have no effect, while the first Terminate() will
now shut it down no matter how many times Initialize() was called.
This behaves nicely with all of our supported usage patterns though,
and allows us to fix a number of nasty hacks from before.
Differential Revision: http://reviews.llvm.org/D8462
llvm-svn: 233758
Summary:
Presently, if a log file already exists, lldb simply starts overwriting bits of it, without
truncating or anything. This patch makes it use eFileOptionFileTruncate by default. It also adds
an --append option, which will append to the file without truncating. A test is included.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8450
llvm-svn: 232801
This creates a new top-level folder called Initialization which
is intended to hold code specific to LLDB system initialization.
Currently this holds the Initialize() and Terminate() functions,
as well as the fatal error handler.
This provides a means to break the massive dependency cycle which
is caused by the fact that Debugger depends on Initialize and
Terminate which then depends on the entire LLDB project. With
this structure, it will be possible for applications to invoke
lldb_private::Initialize() directly, and have that invoke
Debugger::Initialize.
llvm-svn: 232768
After http://reviews.llvm.org/D8133 landed as r231550 process launch on remote platform stopped working.
This adds Debugger::InitializeForLLGS and tracks whether one or both of Initialize and InitializeForLLGS have been called, calling only the corresponding lldb_private::Terminate* methods as necessary. Since lldb_private::Terminate calls lldb_private::TerminateForLLGS, the latter method may be called twice if Initialize was called for both however the terminate methods ensure they are only called once after being initialized.
This still maintains the reduced binary size, though it does now technically link in lldb_private::Terminate on lldb-server even though this should never be called.
This should resolve the issue raised in http://reviews.llvm.org/D8133 where Debugger::Terminate assumed that there were 0 references to debugger and terminated early.
Differential Revision: http://reviews.llvm.org/D8183
llvm-svn: 231808
changing it was in r219544 - after living on that for a few
months, I wanted to take another crack at this.
The disassembly-format setting still exists and the old format
can be user specified with a setting like
${current-pc-arrow}${addr-file-or-load}{ <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>}:
This patch was discussed in http://reviews.llvm.org/D7578
<rdar://problem/19726421>
llvm-svn: 229186
Why? Debugger::FormatPrompt() would run through the format prompt every time and parse it and emit it piece by piece. It also did formatting differently depending on which key/value pair it was parsing.
The new code improves on this with the following features:
1 - Allow format strings to be parsed into a FormatEntity::Entry which can contain multiple child FormatEntity::Entry objects. This FormatEntity::Entry is a parsed version of what was previously always done in Debugger::FormatPrompt() so it is more efficient to emit formatted strings using the new parsed FormatEntity::Entry.
2 - Allows errors in format strings to be shown immediately when setting the settings (frame-format, thread-format, disassembly-format
3 - Allows auto completion by implementing a new OptionValueFormatEntity and switching frame-format, thread-format, and disassembly-format settings over to using it.
4 - The FormatEntity::Entry for each of the frame-format, thread-format, disassembly-format settings only replaces the old one if the format parses correctly
5 - Combines all consecutive string values together for efficient output. This means all "${ansi.*}" keys and all desensitized characters like "\n" "\t" "\0721" "\x23" will get combined with their previous strings
6 - ${*.script:} (like "${var.script:mymodule.my_var_function}") have all been switched over to use ${script.*:} "${script.var:mymodule.my_var_function}") to make the format easier to parse as I don't believe anyone was using these format string power user features.
7 - All key values pairs are defined in simple C arrays of entries so it is much easier to add new entries.
These changes pave the way for subsequent modifications where we can modify formats to do more (like control the width of value strings can do more and add more functionality more easily like string formatting to control the width, printf formats and more).
llvm-svn: 228207
The default help display now shows the alias collection by default, and hides commands whose named begin with an underscore. Help is primarily useful to those unfamiliar with LLDB and should aim to answer typical questions while still being able to provide more esoteric answers when required. To that latter end an argument to include the hidden commands in help has been added, and instead of having a help flag to show aliases there is now one to hide them. This final change might be controversial as it repurposes the -a shorthand as the opposite of its original meaning.
The previous implementation of OutputFormattedHelpText was easily confused by embedded newlines. The new algorithm correctly breaks on the FIRST newline or LAST space/tab before the target column count rather than treating all whitespace interchangeably.
Command interpreters now have the ability to specify help prologue text and a command prefix string. Neither are used in the current LLDB sources but are required to support REPL-like extensions where LLDB commands must be prefixed and additional help text is required to explain how to access traditional debugging commands.
<rdar://problem/17751929>
<rdar://problem/16953815>
<rdar://problem/16953841>
<rdar://problem/16930173>
<rdar://problem/16879028>
llvm-svn: 226068
Jonas Devlieghere
