When PPCVSXFMAMutate would look at the input addend register, it would get its
input value number. This would fail, however, if the register was undef,
causing a segfault. Don't segfault (just skip such FMA instructions).
Fixes the test case from PR24542 (although that may have been over-reduced).
llvm-svn: 245741
This commit extends the 'SlotMapping' structure and includes mappings for named
and numbered types in it. The LLParser is extended accordingly to fill out
those mappings at the end of module parsing.
This information is useful when we want to parse standalone constant values
at a later stage using the 'parseConstantValue' method. The constant values
can be constant expressions, which can contain references to types. In order
to parse such constant values, we have to restore the internal named and
numbered mappings for the types in LLParser, otherwise the parser will report
a parsing error. Therefore, this commit also introduces a new method called
'restoreParsingState' to LLParser, which uses the slot mappings to restore
some of its internal parsing state.
This commit is required to serialize constant value pointers in the machine
memory operands for the MIR format.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 245740
This commit allows the MIR printer to print the MCSymbol machine operands.
Unfortunately they can't be parsed at this time. I will create a bug that will
track the fact that the MCSymbol operands can't be parsed yet.
llvm-svn: 245737
See discussion in D12154 ( http://reviews.llvm.org/D12154 ), AMD Software
Optimization Guides for 10H/12H/15H/16H, and Agner Fog's experimental data.
llvm-svn: 245733
This is a 'no functional change intended' patch. It removes one FIXME, but adds several more.
Motivation: the FeatureFastUAMem attribute may be too general. It is used to determine if any
sized misaligned memory access under 32-bytes is 'fast'. From the added FIXME comments, however,
you can see that we're not consistent about this. Changing the name of the attribute makes it
clearer to see the logic holes.
Changing this to a 'slow' attribute also means we don't have to add an explicit 'fast' attribute
to new chips; fast unaligned accesses have been standard for several generations of CPUs now.
Differential Revision: http://reviews.llvm.org/D12154
llvm-svn: 245729
Gets a bit tricky in the ValueMapper, of course - not sure if we should
just expose a list of explicit types for each Value so that the
ValueMapper can be neutral to these special cases (it's OK for things
like load, where the explicit type is the result type - but when that's
not the case, it means plumbing through another "special" type... )
llvm-svn: 245728
gtest and gtest_main) when generating ``Makefile.llvmbuild``.
Libraries that are not installed should not be exported because they
won't be available from an install tree. Rather than filtering out the
gtest libraries in cmake/modules/Makefile, simply teach llvm-build to
filter out libraries that will not be installed from its generated list
of exported libraries.
Note that LLVMBUILD_LIB_DEPS_* are used during our own CMake build
process so we cannot filter LLVMBUILD_LIB_DEPS_gtest* out in llvm-build.
We must leave this gtest filter logic in cmake/modules/Makefile.
llvm-svn: 245718
Brad King.
Move `LLVM_LIBS_TO_EXPORT` over to Makefile.llvmbuild and generate it
from `llvm-build` using the same logic used to export the dependencies
of these libraries. This avoids depending on `llvm-config`.
This refactoring was originally motivated by issue #24154 due to commit
r243297 (Fix `llvm-config` to emit the linker flag for the combined
shared object, 2015-07-27) changing the output of `llvm-config --libs`
to not have the individual libraries when we configure with
`--enable-shared`. That change was reverted by r244108 but this
refactoring makes sense on its own anyway.
llvm-svn: 245717
Brad King.
The write_cmake_fragment and write_cmake_exports_fragment methods share
some logic for selecting libraries that CMake needs to know about.
Factor it out into a helper to avoid duplication.
llvm-svn: 245716
David Majnemer (the original author) believes this to be an impossible
condition to reach anyway, and no test cases cover this so we'll go with
that.
llvm-svn: 245712
such as std::equal on the third argument. This reverts previous workarounds.
Predefining _DEBUG_POINTER_IMPL disables Visual C++ 2013 headers from defining
it to a function performing the null pointer check. In practice, it's not that
bad since any function actually using the nullptr will seg fault. The other
iterator sanity checks remain enabled in the headers.
Reviewed by Aaron Ballmanþ and Duncan P. N. Exon Smith.
llvm-svn: 245711
This will confirm that the patch in D12154 is actually NFC.
It will also confirm that the proposed changes for the AMD chips
are behaving as expected.
llvm-svn: 245704
This is intended to improve code generation for GEPs, as the index value is
shifted by the element size and in GEPs of multi-dimensional arrays the index
of higher dimensions is multiplied by the lower dimension size.
Differential Revision: http://reviews.llvm.org/D12197
llvm-svn: 245689
Note: I do not implement a base pointer, so it's still impossible to
have dynamic realignment AND dynamic alloca in the same function.
This also moves the code for determining the frame index reference
into getFrameIndexReference, where it belongs, instead of inline in
eliminateFrameIndex.
[Begin long-winded screed]
Now, stack realignment for Sparc is actually a silly thing to support,
because the Sparc ABI has no need for it -- unlike the situation on
x86, the stack is ALWAYS aligned to the required alignment for the CPU
instructions: 8 bytes on sparcv8, and 16 bytes on sparcv9.
However, LLVM unfortunately implements user-specified overalignment
using stack realignment support, so for now, I'm going to go along
with that tradition. GCC instead treats objects which have alignment
specification greater than the maximum CPU-required alignment for the
target as a separate block of stack memory, with their own virtual
base pointer (which gets aligned). Doing it that way avoids needing to
implement per-target support for stack realignment, except for the
targets which *actually* have an ABI-specified stack alignment which
is too small for the CPU's requirements.
Further unfortunately in LLVM, the default canRealignStack for all
targets effectively returns true, despite that implementing that is
something a target needs to do specifically. So, the previous behavior
on Sparc was to silently ignore the user's specified stack
alignment. Ugh.
Yet MORE unfortunate, if a target actually does return false from
canRealignStack, that also causes the user-specified alignment to be
*silently ignored*, rather than emitting an error.
(I started looking into fixing that last, but it broke a bunch of
tests, because LLVM actually *depends* on having it silently ignored:
some architectures (e.g. non-linux i386) have smaller stack alignment
than spilled-register alignment. But, the fact that a register needs
spilling is not known until within the register allocator. And by that
point, the decision to not reserve the frame pointer has been frozen
in place. And without a frame pointer, stack realignment is not
possible. So, canRealignStack() returns false, and
needsStackRealignment() then returns false, assuming everyone can just
go on their merry way assuming the alignment requirements were
probably just suggestions after-all. Sigh...)
Differential Revision: http://reviews.llvm.org/D12208
llvm-svn: 245668
The module splitter splits a module into linkable partitions. It will
be used to implement parallel LTO code generation.
This initial version of the splitter does not attempt to deal with the
somewhat subtle symbol visibility issues around module splitting. These
will be dealt with in a future change.
Differential Revision: http://reviews.llvm.org/D12132
llvm-svn: 245662
When producing conditional compare sequences for or operations we need
to negate the operands and the finally tested flags. The thing is if we negate
the finally tested flags this equals a logical negation of all previously
emitted expressions. There was a case missing where we have to order OR
expressions so they get emitted first.
This fixes http://llvm.org/PR24459
llvm-svn: 245641
Create CMP;CCMP sequences from and/or trees does not gain us anything if
the and/or tree is materialized to a GP register anyway. While most of
the code already checked for hasOneUse() there was one important case
missing.
llvm-svn: 245640
Summary:
This transform is never a pessimization at the IR level (since it
replaces an `icmp` with another), and has potentiall payoffs:
1. It may make the `icmp` fold away or become loop invariant.
2. It may make the `A & (L - 1)` computation dead.
This shows up in Java, in range checks generated by array accesses of
the form `a[i & (a.length - 1)]`.
Reviewers: reames, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12210
llvm-svn: 245635
and make it always preserve debug locations, since all callers wanted this
behavior anyway.
This is addressing a post-commit review feedback for r245589.
NFC (inside the LLVM tree).
llvm-svn: 245622
Fixes PR23464: one way to use the broadcast intrinsics is:
_mm256_broadcastw_epi16(_mm_cvtsi32_si128(*(int*)src));
We don't currently fold this, but now that we use native IR for
the intrinsics (r245605), we can look through one bitcast to find
the broadcast scalar.
Differential Revision: http://reviews.llvm.org/D10557
llvm-svn: 245613
Summary:
Add an LSR test that exercises isTruncateFree. Without this change, LSR creates
another indvar representing the truncated value.
Reviewers: jholewinski, eliben
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D12058
llvm-svn: 245611
Since r245605, the clang headers don't use these anymore.
r245165 updated some of the tests already; update the others, add
an autoupgrade, remove the intrinsics, and cleanup the definitions.
Differential Revision: http://reviews.llvm.org/D10555
llvm-svn: 245606
This patch adds support for asan on aarch64-linux with 42-bit VMA
(current default config for 64K pagesize kernels). The support is
enabled by defining the SANITIZER_AARCH64_VMA to 42 at build time
for both clang/llvm and compiler-rt. The default VMA is 39 bits.
llvm-svn: 245594
Summary:
Refactor, NFC
Extracts computeOverflowForSignedAdd and isKnownNonNegative from NaryReassociate to ValueTracking in case
others need it.
Reviewers: reames
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D11313
llvm-svn: 245591
Instruction::dropUnknownMetadata(KnownSet) is supposed to preserve all
metadata in KnownSet, but the condition for DebugLocs was inverted.
Most users of dropUnknownMetadata() actually worked around this by not
adding LLVMContext::MD_dbg to their list of KnowIDs.
This is now made explicit.
llvm-svn: 245589
Caught by the famous "DebugLoc describes the currect SubProgram" assertion.
When GVN is removing a nonlocal load it updates the debug location of the
SSA value it replaced the load with with the one of the load. In the
testcase this actually overwrites a valid debug location with an empty one.
In reality GVN has to make an arbitrary choice between two equally valid
debug locations. This patch changes to behavior to only update the
location if the value doesn't already have a debug location.
llvm-svn: 245588
Since Ashutosh made findDefsUsedOutsideOfLoop public, we can clean this
up.
Now clients that don't compute DefsUsedOutsideOfLoop can just call
versionLoop() and computing DefsUsedOutsideOfLoop will happen
implicitly. With that there is no reason to expose addPHINodes anymore.
Ashutosh, you can now drop the calls to findDefsUsedOutsideOfLoop and
addPHINodes in LVerLICM and things should just work.
llvm-svn: 245579
It won't go well. We've already marked 64-bit SETCCs as non-Custom, but it's just possible that a SETCC has a legal result type but an illegal operand type. If this happens, bail out before we create unselectable nodes.
Fixes PR24292. I tried to create a testcase but in 99% of cases we can't trigger this - not surprising that this bug has been latent since 2009.
llvm-svn: 245577
Summary: We know that -x & 1 is equivalent to x & 1, avoid using negation for testing if a negative integer is even or odd.
Reviewers: majnemer
Subscribers: junbuml, mssimpso, gberry, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D12156
llvm-svn: 245569
COMISD should receive QWORD because it is defined as
(V)COMISD xmm1, xmm2/m64
COMISS should receive DWORD because it is defined as
(V)COMISS xmm1, xmm2/m32
Differential Revision: http://reviews.llvm.org/D11712
llvm-svn: 245551
Usually DSE is not supposed to remove lifetime intrinsics, but it's
actually ok to remove them for dead objects in terminating blocks,
because they convey no extra information there. Until we hit a lifetime
start that cannot be removed, that is. Because from that point on the
lifetime intrinsics become interesting again, e.g. for stack coloring.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11710
llvm-svn: 245542
analyses into LLVM's Analysis library rather than having them in
a Transforms library.
This is motivated by the need to have the core AliasAnalysis
infrastructure be aware of the ObjCARCAliasAnalysis. However, it also
seems like a nice and clean separation. Everything was very easy to move
and this doesn't create much clutter in the analysis library IMO.
Differential Revision: http://reviews.llvm.org/D12133
llvm-svn: 245541
XVCMPEQDP is used for VSX v2f64 equality comparisons, but the value type needs
to be v2i64 (as that's the corresponding SETCC type).
Fixes PR24225.
llvm-svn: 245535
This DAGCombine was creating custom SDAG nodes with an illegal ppc_fp128
operand type because it was triggering on f64/f32 int2fp(fp2int(ppc_fp128 x)),
but shouldn't (it should only apply to f32/f64 types). The result was a crash.
llvm-svn: 245530
This commit modifies the serialization syntax so that the global IR values in
machine memory operands use the global value '@<name>' syntax instead of the
current '%ir.<name>' syntax.
The unnamed global IR values are handled by this commit as well, as the
existing global value parsing method can parse the unnamed globals already.
llvm-svn: 245527
The global IR values in machine memory operands should use the global value
'@<name>' syntax instead of the current '%ir.<name>' syntax.
However, the global value call entry pseudo source values use the global value
syntax already. Therefore, the syntax for the call entry pseudo source values
has to be changed so that the global values and call entry global value PSVs
can be parsed without ambiguities.
llvm-svn: 245526
Machine memory operands can contain pointer values that are constants, and
the 'getLocalSlot' method requires non-constant values.
The constant pointer values will have to be serialized in a different patch.
llvm-svn: 245523
This is something like nullopt in std::experimental::optional. Optional
could already be constructed from None, so this seems like an obvious
extension from there.
I have a use in a future patch for Clang, though it may not go that
way/end up used - so this seemed worth committing now regardless.
llvm-svn: 245518
We still need to add constant folding of vector comparisons to fold the tests for targets that don't support the respective min/max nodes
I needed to update 2011-12-06-AVXVectorExtractCombine to load a vector instead of using a constant vector to prevent it folding
Differential Revision: http://reviews.llvm.org/D12118
llvm-svn: 245503
We are already falling back to SelectionDAG when encountering an shift with UB.
This adds the same checks for shifts with UB that get folded into arithmetic or
logical operations.
This fixes rdar://problem/22345295.
llvm-svn: 245499
We don't do a great job with >= 0 comparisons against zero when the
result is used as an i8.
Given something like:
void f(long long LL, bool *B) {
*B = LL >= 0;
}
We used to generate:
shrq $63, %rdi
xorb $1, %dil
movb %dil, (%rsi)
Now we generate:
testq %rdi, %rdi
setns (%rsi)
Differential Revision: http://reviews.llvm.org/D12136
llvm-svn: 245498
Previously WebAssembly's datalayout string had -v128:8:128. This had been an
attempt to declare a certain level of support for unaligned SIMD accesses.
However, clang makes its own determinations for SIMD alignment that are
independent of the datalayout string, so this wasn't actually meaningful.
llvm-svn: 245494
Check to see if this is a CONCAT_VECTORS of a bunch of EXTRACT_SUBVECTOR operations. If so, and if the EXTRACT_SUBVECTOR vector inputs come from at most two distinct vectors the same size as the result, attempt to turn this into a legal shuffle.
Differential Revision: http://reviews.llvm.org/D12125
llvm-svn: 245490
This commit serializes the machine instruction's register operand ties.
The ties are printed out only when the instructon has register ties that are
different from the ties that are specified in the instruction's description.
llvm-svn: 245482
This revision has introduced an issue that only affects bootstrapped compiler
when it is printing the ASM. I am working on resolving the issue, but in the
meantime, I'm disabling the legalization of scalar_to_vector operation for v2i64
and the associated testing until I can get this fixed.
llvm-svn: 245481
The defined registers are already serialized - they are represented by placing
them before the '=' in a machine instruction. However, certain instructions like
INLINEASM can have defined register operands after the '=', so this commit
introduces the 'def' register flag for such operands.
llvm-svn: 245480
Reintroduce r245442. Remove an overly conservative assertion introduced
in r245442. We could replace the assertion to use `shareSameRegisterFile`
instead, but in that point in `insertPHI` we already lost the original
Def subreg to check against. So drop the assertion completely.
Original commit message:
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
llvm-svn: 245479
Since r244955, we try to use the short-form ErrorInfo when both
tries failed, and the long-form match failed on a suffix operand.
However, this means we sometimes mix ErrorInfo and MatchResult
(one manifestation of this being PR24498). Instead, restore both.
llvm-svn: 245469
Rewrite some code to not use a lambda function. The non-lambda code is just
about as clean as the original, and not any longer. The lambda function causes
an internal compiler error in GCC 4.8.0, and it is not worth breaking support
for that compiler over this. NFC.
llvm-svn: 245466
This patch updates the X86 lowering so that the Exception Pointer and Selector
are 64-bit wide only if Subtarget.isTarget64BitLP64.
Patch by João Porto
Reviewers: dschuff, rnk
Differential Revision: http://reviews.llvm.org/D12111
llvm-svn: 245454
Reapply r243486.
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
llvm-svn: 245442
Summary:
The mid-end was generating vector smin/smax/umin/umax nodes, but
we were using vbsl to generatate the code. This adds the vmin/vmax
patterns and a test to check that we are now generating vmin/vmax
instructions.
Reviewers: rengolin, jmolloy
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D12105
llvm-svn: 245439
There are some cases where the mul sequence is smaller, but for the most part,
using a div is preferable. This does not apply to vectors, since x86 doesn't
have vector idiv, and a vector mul/shifts sequence ought to be smaller than a
scalarized division.
Differential Revision: http://reviews.llvm.org/D12082
llvm-svn: 245431
This removes the isPow2SDivCheap() query, as it is not currently used in
any meaningful way. isIntDivCheap() no longer relies on a state variable
(as all in-tree target set it to false), but the interface allows querying
based on the type optimization level.
NFC.
Differential Revision: http://reviews.llvm.org/D12082
llvm-svn: 245430
without *requiring* it.
This allows a pass indicate that it will use an analysis if available
(through getAnalysisIfAvailable). When the pass manager knows this, it
will refrain from deleting that analysis if it can. Naturally, it will
still get invalidated at the correct time. These passes are not
considered when scheduling the pass pipeline, so typically they will
require manual scheduling, but this may also allow passes with
getAnalysisIfAvailable to find the analysis more often if nothing after
them requires that analysis and it wasn't invalidated.
I don't have a particular use case with the current passes, but with my
new structure for alias analyses, this will be very useful. We want to
allow people to customize the set of AAs available by scheduling
additional passes. These's aren't ever *required* for obvious reasons.
So we need some way to mark in the legacy pass manager that they will
still be used if available.
This is essentially how analysis groups already work. But this makes the
feature generally available and more explicit. It should allow the AA
change to not impact how people trigger a custom alias analysis being
available at a certain point in compilation.
Differential Revision: http://reviews.llvm.org/D12114
llvm-svn: 245409
Fix how DependenceAnalysis calls delinearization, mirroring what is done in
Delinearization.cpp (mostly by making sure to call getSCEVAtScope before
delinearizing, and by removing the unnecessary 'Pairs == 1' check).
Patch by Vaivaswatha Nagaraj!
llvm-svn: 245408
Here we make ScalarEvolution::isKnownPredicate, indirectly, a little smarter.
Given some relational comparison operator OP, and two AddRec SCEVs, {I,+,S} OP
{J,+,T}, we can reduce this to the comparison I OP J when S == T, both AddRecs
are for the same loop, and both are known not to wrap.
As it turns out, because of the way that backedge-guard expressions can be
leveraged when computing known predicates, this allows indvars to simplify the
if-statement comparison in this loop:
void foo (int *a, int *b, int n) {
for (int i = 0; i < n; ++i) {
if (i > n)
a[i] = b[i] + 1;
}
}
which, somewhat surprisingly, we were not previously optimizing away.
llvm-svn: 245400
This commit adds support for bit mask target flag serialization to the MIR
printer and the MIR parser. It also adds support for the machine operand's
target flag serialization to the AArch64 target.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 245383
This consolidates use of isUnalignedMem32Slow() in one place.
There is a slight change in logic although I'm not sure that it would ever
come up in the real world: we were assuming that an alignment of the type
size is always fast; now, we actually check the data layout to confirm that.
llvm-svn: 245382
Remove support for Valgrind-based TSan, which hasn't been maintained for a
few years. We now use the TSan annotations only if LLVM is compiled with
-fsanitize=thread. We no longer need the weak function definitions as we
are guaranteed that our program is linked directly with the TSan runtime.
Differential Revision: http://reviews.llvm.org/D12121
llvm-svn: 245374
method.
This commit extracts the code that parses the stack object references into a
new method named 'parseStackFrameIndex', so that it can be reused when
parsing standalone stack object references.
llvm-svn: 245370
To properly handle this, define the *a instructions as separate
instruction classes by refactoring the LoadA and StoreA multiclasses.
Move the instruction tests into the sparcv9 file to test the difference.
llvm-svn: 245360
The current code normalizes select(C0, x, select(C1, x, y)) towards
select(C0|C1, x, y) if the targets prefers that form. This patch adds an
additional rule that if the select(C1, x, y) part already exists in the
function then we want to normalize into the other direction because the
effects of reusing the existing value are bigger than transforming into
the target preferred form.
This addresses regressions following r238793, see also:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20150727/290272.html
Differential Revision: http://reviews.llvm.org/D11616
llvm-svn: 245350
Note that this actually has no functional change -- we never call these
methods using the derived type. But it is still cleaner and fixes a GCC
warning.
Spotted by Dave in code review and the warning spotted by Joerg on IRC.
llvm-svn: 245341
State numbers are calculated by performing a walk from the innermost
funclet to the outermost funclet. Rudimentary support for the new EH
constructs has been added to the assembly printer, just enough to test
the new machinery.
Differential Revision: http://reviews.llvm.org/D12098
llvm-svn: 245331
folding the code into the main Analysis library.
There already wasn't much of a distinction between Analysis and IPA.
A number of the passes in Analysis are actually IPA passes, and there
doesn't seem to be any advantage to separating them.
Moreover, it makes it hard to have interactions between analyses that
are both local and interprocedural. In trying to make the Alias Analysis
infrastructure work with the new pass manager, it becomes particularly
awkward to navigate this split.
I've tried to find all the places where we referenced this, but I may
have missed some. I have also adjusted the C API to continue to be
equivalently functional after this change.
Differential Revision: http://reviews.llvm.org/D12075
llvm-svn: 245318
Historically there seems to be some resistance regarding the change to DenseMap
(r147980). However, I couldn't find cases of iterator invalidation for
ValueCacheEntryTy, but only for ValueCache, which I left untouched.
This reduces 20s on an internal testcase. Follow up from r245309.
Differential Revision: http://reviews.llvm.org/D11651
rdar://problem/21320066
llvm-svn: 245314
Changes in LoopUnroll in the past six months exposed scalability
issues in LazyValueInfo when used from JumpThreading. One internal test
that used to take 20s under -O2 now takes 6min.
This commit change the OverDefinedCache from
DenseSet<std::pair<AssertingVH<BasicBlock>, Value*>> to
DenseMap<AssertingVH<BasicBlock>, SmallPtrSet<Value *, 4>>
and reduces compile time down to 1m40s.
Differential Revision: http://reviews.llvm.org/D11651
rdar://problem/21320066
llvm-svn: 245309
Summary: This is the correct way to handle JAL instructions when PIC is enabled.
Patch by Toma Tabacu
Reviewers: seanbruno, tomatabacu
Subscribers: brooks, seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D6231
llvm-svn: 245305
This is (almost) everything under MC/MachO/ARM. There are still some
cases missing, because llvm-readobj doesn't (yet) support some features,
that macho-dump provides. I plan to reduce the gap between them shortly.
llvm-svn: 245302
Summary:
This information is needed to decide whether we do the PIC-only JAL expansions or not. It's also needed for an upcoming patch which implements the .cprestore assembler directive (which can only be used effectively in PIC mode).
By making this information available to the MipsAsmParser, we will know when to insert the instructions mandated by the .cprestore assembler directive and we will be able to give some useful warnings when we encounter a potential misuse of this directive.
Patch by Toma Tabacu
Reviewers: dsanders, seanbruno
Subscribers: brooks, seanbruno, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D5626
llvm-svn: 245291
Summary: Windows system rarely have good PostScript viewers installed, but PDF viewers are common. So for viewing graphs, generate PDF files and open with the associated PDF viewer using cmd.exe's start command.
Reviewers: Bigcheese, aaron.ballman
Subscribers: aaron.ballman, JakeVanAdrighem, dwiberg, llvm-commits
Differential Revision: http://reviews.llvm.org/D11877
llvm-svn: 245290
Summary:
When calling DisplayGraph and a PS viewer is chosen, two programs are executed: The GraphViz generator and the PostScript viewer. Always for the generator to finish to ensure that the .ps file is written before opening the viewer for that file. DisplayGraph's wait parameter refers to whether to wait until the user closes the viewer.
This happened on Windows and if none of the options to open the .dot file directly applies, also on Linux.
Reviewers: Bigcheese, chandlerc, aaron.ballman
Subscribers: dwiberg, aaron.ballman, llvm-commits
Differential Revision: http://reviews.llvm.org/D11876
llvm-svn: 245289
After hitting @llvm.assume(X) we can:
- propagate equality that X == true
- if X is icmp/fcmp (with eq operation), and one of operand
is constant we can change all variables with constants in the same BasicBlock
http://reviews.llvm.org/D11918
llvm-svn: 245265
WebAssembly doesn't yet have a specified binary format, and it may not
end up being ELF, so we don't want the Triple class defaulting to ELF
for it at this time.
llvm-svn: 245254
The arch prefix string isn't currently being used for anything on
WebAssembly, but if it were to be used, it makes sense to use the
same arch prefix string for wasm32 and wasm64.
llvm-svn: 245252
It is possible to be in a situation where more than one funclet token is
a valid SSA value. If we see a terminator which exits a funclet which
doesn't use the funclet's token, replace it with unreachable.
Differential Revision: http://reviews.llvm.org/D12074
llvm-svn: 245238
Primary purpose of this change is to reuse existing code inside findExistingExpansion. However it introduces very slight semantic change - findExistingExpansion now looks into exiting blocks instead of a loop latches. Originally heuristic was based on the fact that we want to look at the loop exit conditions. And since all exiting latches will be listed in the ExitingBlocks, heuristic stays roughly the same.
Differential Revision: http://reviews.llvm.org/D12008
llvm-svn: 245227
Summary:
Increase the estimated costs for insert/extract element operations on
AArch64. This is motivated by results from benchmarking interleaved
accesses.
Add missing costs for zext/sext/trunc instructions and some integer to
floating point conversions. These costs were previously calculated
by scalarizing these operation and were affected by the cost increase of
the insert/extract element operations.
Reviewers: rengolin
Subscribers: mcrosier, aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D11939
llvm-svn: 245226
Summary:
This change limits the minimum cost of an insert/extract
element operation to 2 in cases where this would result
in mixing of NEON and VFP code.
Reviewers: rengolin
Subscribers: mssimpso, aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D12030
llvm-svn: 245225
All possible ModRef behaviours can be completely represented using existing LLVM IR attributes.
Differential Revision: http://reviews.llvm.org/D12033
llvm-svn: 245224
This commit adds a virtual `peekTokens()` function to `MCAsmLexer`
which can peek forward an arbitrary number of tokens.
It also makes the `peekTok()` method call `peekTokens()` method, but
only requesting one token.
The idea is to better support targets which more more ambiguous
assembly syntaxes.
Patch by Dylan McKay!
llvm-svn: 245221
Summary:
When demoting an SSA value that has a use on a phi and one of the phi's
predecessors terminates with catchret, the edge needs to be split and the
load inserted in the new block, else we'll still have a cross-funclet SSA
value.
Add a test for this, and for the similar case where a def to be spilled is
on and invoke and a critical edge, which was already implemented but
missing a test.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12065
llvm-svn: 245218
Summary: It is the same as LA, except that it can also load 64-bit addresses and it only works on 64-bit MIPS architectures.
Reviewers: tomatabacu, seanbruno, vkalintiris
Subscribers: brooks, seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D9524
llvm-svn: 245208
These only get generated if the target supports them. If one of the variants is not legal and the other is, and it is safe to do so, the other variant will be emitted.
For example on AArch32 (V8), we have scalar fminnm but not fmin.
Fix up a couple of tests while we're here - one now produces better code, and the other was just plain wrong to start with.
llvm-svn: 245196
PR24469 resulted because DeleteDeadInstruction in handleNonLocalStoreDeletion was
deleting the next basic block iterator. Fixed the same by resetting the basic block iterator
post call to DeleteDeadInstruction.
llvm-svn: 245195
This change makes ScalarEvolution a stand-alone object and just produces
one from a pass as needed. Making this work well requires making the
object movable, using references instead of overwritten pointers in
a number of places, and other refactorings.
I've also wired it up to the new pass manager and added a RUN line to
a test to exercise it under the new pass manager. This includes basic
printing support much like with other analyses.
But there is a big and somewhat scary change here. Prior to this patch
ScalarEvolution was never *actually* invalidated!!! Re-running the pass
just re-wired up the various other analyses and didn't remove any of the
existing entries in the SCEV caches or clear out anything at all. This
might seem OK as everything in SCEV that can uses ValueHandles to track
updates to the values that serve as SCEV keys. However, this still means
that as we ran SCEV over each function in the module, we kept
accumulating more and more SCEVs into the cache. At the end, we would
have a SCEV cache with every value that we ever needed a SCEV for in the
entire module!!! Yowzers. The releaseMemory routine would dump all of
this, but that isn't realy called during normal runs of the pipeline as
far as I can see.
To make matters worse, there *is* actually a key that we don't update
with value handles -- there is a map keyed off of Loop*s. Because
LoopInfo *does* release its memory from run to run, it is entirely
possible to run SCEV over one function, then over another function, and
then lookup a Loop* from the second function but find an entry inserted
for the first function! Ouch.
To make matters still worse, there are plenty of updates that *don't*
trip a value handle. It seems incredibly unlikely that today GVN or
another pass that invalidates SCEV can update values in *just* such
a way that a subsequent run of SCEV will incorrectly find lookups in
a cache, but it is theoretically possible and would be a nightmare to
debug.
With this refactoring, I've fixed all this by actually destroying and
recreating the ScalarEvolution object from run to run. Technically, this
could increase the amount of malloc traffic we see, but then again it is
also technically correct. ;] I don't actually think we're suffering from
tons of malloc traffic from SCEV because if we were, the fact that we
never clear the memory would seem more likely to have come up as an
actual problem before now. So, I've made the simple fix here. If in fact
there are serious issues with too much allocation and deallocation,
I can work on a clever fix that preserves the allocations (while
clearing the data) between each run, but I'd prefer to do that kind of
optimization with a test case / benchmark that shows why we need such
cleverness (and that can test that we actually make it faster). It's
possible that this will make some things faster by making the SCEV
caches have higher locality (due to being significantly smaller) so
until there is a clear benchmark, I think the simple change is best.
Differential Revision: http://reviews.llvm.org/D12063
llvm-svn: 245193
This is a very minimal move support - it leaves the moved-from object in
a zombie state that is only valid for destruction and move assignment.
This seems fine to me, and leaving it in the default constructed state
would require adding more state to the object and potentially allocating
memory (!!!) and so seems like a Bad Idea.
llvm-svn: 245192
If we can ignore NaNs, fmin/fmax libcalls can become compare and select
(this is what we turn std::min / std::max into).
This IR should then be optimized in the backend to whatever is best for
any given target. Eg, x86 can use minss/maxss instructions.
This should solve PR24314:
https://llvm.org/bugs/show_bug.cgi?id=24314
Differential Revision: http://reviews.llvm.org/D11866
llvm-svn: 245187
Bitwise arithmetic can obscure a simple sign-test. If replacing the
mask with a truncate is preferable if the type is legal because it
permits us to rephrase the comparison more explicitly.
llvm-svn: 245171
analysis ...
It turns out that we *do* need the old CallGraph ported to the new pass
manager. There are times where this model of a call graph is really
superior to the one provided by the LazyCallGraph. For example,
GlobalsModRef very specifically needs the model provided by CallGraph.
While here, I've tried to make the move semantics actually work. =]
llvm-svn: 245170
We can set additional bits in a mask given that we know the other
operand of an AND already has some bits set to zero. This can be more
efficient if doing so allows us to use an instruction which implicitly
sign extends the immediate.
This fixes PR24085.
Differential Revision: http://reviews.llvm.org/D11289
llvm-svn: 245169
ByteSize and BitSize should not be size_t but unsigned, considering
1) They are at most 2^16 and 2^19, respectively.
2) BitSize is an argument to Type::getIntNTy which takes unsigned.
Also, use the correct utostr instead itostr and cache the string result.
Thanks to James Touton for reporting this!
llvm-svn: 245167
For cases where we TRUNCATE and then ZERO_EXTEND to a larger size (often from vector legalization), see if we can mask the source data and then ZERO_EXTEND (instead of after a ANY_EXTEND). This can help avoid having to generate a larger mask, and possibly applying it to several sub-vectors.
(zext (truncate x)) -> (zext (and(x, m))
Includes a minor patch to SystemZ to better recognise 8/16-bit zero extension patterns from RISBG bit-extraction code.
This is the first of a number of minor patches to help improve the conversion of byte masks to clear mask shuffles.
Differential Revision: http://reviews.llvm.org/D11764
llvm-svn: 245160
infrastructure.
This AA was never used in tree. It's infrastructure also completely
overlaps that of TargetLibraryInfo which is used heavily by BasicAA to
achieve similar goals to those stated for this analysis.
As has come up in several discussions, the use case here is still really
important, but this code isn't helping move toward that use case. Any
progress on better supporting rich AA information for runtime library
environments would likely be better off starting from scratch or
starting from TargetLibraryInfo than from this base.
Differential Revision: http://reviews.llvm.org/D12028
llvm-svn: 245155
When trying to fix SGPR live ranges, skip defs that are
killed in the same block as the def. I don't think
we need to worry about these cases as long as the
live ranges of the SGPRs in dominating blocks are
correct.
This reduces the number of elements the second
loop over the function needs to look at, and makes
it generally easier to understand. The second loop
also only considers if the live range is live
in to a block, which logically means it
must have been live out from another.
llvm-svn: 245150
Some personality routines require funclet exit points to be clearly
marked, this is done by producing a token at the funclet pad and
consuming it at the corresponding ret instruction. CleanupReturnInst
already had a spot for this operand but CatchReturnInst did not.
Other personality routines don't need to use this which is why it has
been made optional.
llvm-svn: 245149
function.
This was the same as getFrameIndexReference, but without the FrameReg
output.
Differential Revision: http://reviews.llvm.org/D12042
llvm-svn: 245148
This is just an initial checkin of an implementation of the Relooper algorithm, in preparation for WebAssembly codegen to utilize. It doesn't do anything yet by itself.
The Relooper algorithm takes an arbitrary control flow graph and generates structured control flow from that, utilizing a helper variable when necessary to handle irreducibility. The WebAssembly backend will be able to use this in order to generate an AST for its binary format.
Author: azakai
Reviewers: jfb, sunfish
Subscribers: jevinskie, arsenm, jroelofs, llvm-commits
Differential revision: http://reviews.llvm.org/D11691
llvm-svn: 245142
This patch makes the Merge Functions pass faster by calculating and comparing
a hash value which captures the essential structure of a function before
performing a full function comparison.
The hash is calculated by hashing the function signature, then walking the basic
blocks of the function in the same order as the main comparison function. The
opcode of each instruction is hashed in sequence, which means that different
functions according to the existing total order cannot have the same hash, as
the comparison requires the opcodes of the two functions to be the same order.
The hash function is a static member of the FunctionComparator class because it
is tightly coupled to the exact comparison function used. For example, functions
which are equivalent modulo a single variant callsite might be merged by a more
aggressive MergeFunctions, and the hash function would need to be insensitive to
these differences in order to exploit this.
The hashing function uses a utility class which accumulates the values into an
internal state using a standard bit-mixing function. Note that this is a different interface
than a regular hashing routine, because the values to be hashed are scattered
amongst the properties of a llvm::Function, not linear in memory. This scheme is
fast because only one word of state needs to be kept, and the mixing function is
a few instructions.
The main runOnModule function first computes the hash of each function, and only
further processes functions which do not have a unique function hash. The hash
is also used to order the sorted function set. If the hashes differ, their
values are used to order the functions, otherwise the full comparison is done.
Both of these are helpful in speeding up MergeFunctions. Together they result in
speedups of 9% for mysqld (a mostly C application with little redundancy), 46%
for libxul in Firefox, and 117% for Chromium. (These are all LTO builds.) In all
three cases, the new speed of MergeFunctions is about half that of the module
verifier, making it relatively inexpensive even for large LTO builds with
hundreds of thousands of functions. The same functions are merged, so this
change is free performance.
Author: jrkoenig
Reviewers: nlewycky, dschuff, jfb
Subscribers: llvm-commits, aemerson
Differential revision: http://reviews.llvm.org/D11923
llvm-svn: 245140
This seems to only work some of the time. In some situations,
this seems to use a nonsensical type and isn't actually aware of the
memory being accessed. e.g. if branch condition is an icmp of a pointer,
it checks the addressing mode of i1.
llvm-svn: 245137
True branch instructions do behave as expected with liveness.
Avoid the phrasing "branch decision is based on a value in an SGPR"
because this could be misleading. A VALU compare instruction's
result is still based on an SGPR, even though that condition
may be divergent.
llvm-svn: 245131
Summary:
http://reviews.llvm.org/D11212 made Scalar Evolution able to propagate NSW and NUW flags from instructions to SCEVs for add instructions. This patch expands that to sub, mul and shl instructions.
This change makes LSR able to generate pointer induction variables for loops like these, where the index is 32 bit and the pointer is 64 bit:
for (int i = 0; i < numIterations; ++i)
sum += ptr[i - offset];
for (int i = 0; i < numIterations; ++i)
sum += ptr[i * stride];
for (int i = 0; i < numIterations; ++i)
sum += ptr[3 * (i << 7)];
Reviewers: atrick, sanjoy
Subscribers: sanjoy, majnemer, hfinkel, llvm-commits, meheff, jingyue, eliben
Differential Revision: http://reviews.llvm.org/D11860
llvm-svn: 245118
Although targeting CoreCLR is similar to targeting MSVC, there are
certain important differences that the backend must be aware of
(e.g. differences in stack probes, EH, and library calls).
Differential Revision: http://reviews.llvm.org/D11012
llvm-svn: 245115
We canonicalize V64 vectors to V128 through insert_subvector: the other
FMLA/FMLS/FMUL/FMULX patterns match that already, but this one doesn't,
so we'd fail to match fmls and generate fneg+fmla instead.
The vector equivalents are already tested and functional.
llvm-svn: 245107
David Blaikie