Currently any API level>=16 uses default PIE.
If API level<16 is too old to be supported, we can clean up some code.
Reviewed By: danalbert
Differential Revision: https://reviews.llvm.org/D113370
This test checks whether crtbegin.o and crtend.o appear on the link
line, but names of these files may be affected by the choice of the
rtlib, specifically when compiler-rt is used as the default rtlib
the names will be clang_rt.crtbegin.o and clang_rt.crtend.o instead
of crtbeginS.o and crtendS.o. To avoid the test failure, explicitly
request to use the platform rtlib.
Differential Revision: https://reviews.llvm.org/D61383
llvm-svn: 359706
MIPS does not use PIC level 2 for historical reasons,
even with -fPIC/-mxgot/multigot options. This patch
prevents PIC to be set to level 2 for MIPS.
Differential Revision: https://reviews.llvm.org/D44381
llvm-svn: 330118
OS instead of inferring it from SDK / environment
The OS version is specified in -target should be used instead of the one in an
environment variable / SDK name.
rdar://35813850
Differential Revision: https://reviews.llvm.org/D40998
llvm-svn: 321099
set -pie as default for musl linux targets
add detection of alpine linux
append appropriate compile flags for alpine
Reviewers: rnk
Differential Revision: https://reviews.llvm.org/D39588
llvm-svn: 318608
Summary:
Also enable -no-pie on Gnu toolchain (previously available on Darwin only).
Non-PIE executables won't even start on recent Android, and DT_RPATH is ignored by the loader.
Reviewers: srhines, danalbert
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D38430
llvm-svn: 316606
Summary:
For example, this option is expected by ghc (haskell compiler). Currently, building with ghc will fail with:
```
clang: error: unknown argument: '-no-pie'
`gcc' failed in phase `Linker'. (Exit code: 1)
. /usr/share/haskell-devscripts/Dh_Haskell.sh && \
configure_recipe
```
This won't do anything (but won't fail with an error)
Reviewers: rafael, joerg
Reviewed By: joerg
Subscribers: joerg, cfe-commits
Differential Revision: https://reviews.llvm.org/D35462
llvm-svn: 308268
Windows uses PE/COFF which is inherently position independent. The use
of the PIC model is unnecessary. In fact, we would generate invalid
code using the ELF PIC model when PIC was enabled previously. Now that
we no longer accept -fPIC and -fpoc, this switches the internal
representation to the static model to permit us to make PIC modules
invalid when targeting Windows. This should not change the code
generation, only the internal state management.
llvm-svn: 290569
The PIC and PIE levels are not independent. In fact, if PIE is defined
it is always the same as PIC.
This is clear in the driver where ParsePICArgs returns a PIC level and
a IsPIE boolean. Unfortunately that is currently lost and we pass two
redundant levels down the pipeline.
This patch keeps a bool and a PIC level all the way down to codegen.
llvm-svn: 273566
We do pass -pic-level to cc1 when targeting darwin. Given that codegen
itself doesn't use it, the only difference is whether __PIE__ and
__pie__ are defined.
llvm-svn: 273450
The PIC default is set for the MachO toolchain, not just the Darwin toolchain,
so this treats those the same. The behavior with -static should be the same
for all MachO targets. rdar://24152327
llvm-svn: 257556
r245667 changed -static so that it doesn't override an explicit -fPIC
option, but -static should still change the default for Darwin for -fno-PIC.
This matches longstanding GCC and Clang behavior on Darwin and changing it
would be disruptive, with no significant benefit.
http://reviews.llvm.org/D15455
rdar://problem/23811045
llvm-svn: 256026
This patch should add support for almost all command-line options and
driver tinkering necessary to produce a correct "clang -cc1"
invocation for watchOS and tvOS.
llvm-svn: 251706
For some reason, clang had been treating a command like:
clang -static -fPIC foo.c
as if it should be compiled without the PIC relocation model.
This was incorrect: -static should be affecting only the linking
model, and -fPIC only the compilation.
This new behavior also matches GCC.
This is a follow-up from a review comment on r245447.
Differential Revision: http://reviews.llvm.org/D12208
llvm-svn: 245667
Somehow a check for aarch64 was added to the Darwin toolchain's
isKernelStatic function as part of the initial commit for Apple's
arm64 target (r205100). That check was not in any of Apple's internal
code and no one here knows where it came from. It has been harmless
because "-static" does not change much, if anything, for arm64 iOS code,
but it makes no sense to keep this check.
llvm-svn: 228673
For some regression tests the path to the right toolchain is specified using the -sysroot switch. However, if clang was configured with a custom gcc toolchain (either by using GCC_INSTALL_PREFIX in cmake or the equivalent configure command), the path to the custom gcc toolchain path takes precedence to the one specified by sysroot. This causes several regression tests to fail as they will be using an unexpected path. This patch fixes this issue by adding --gcc-toolchain='' to all tests that rely on that. The empty string causes the driver to pick the path from sysroot instead.
llvm-svn: 225182
I added this check a while back but then made a note to myself that it
should be completely unnecessary since iOS always uses PIC code-gen for
aarch64. Since I could never come up with any reason why it would be
necessary, I'm just going to remove it and we'll see if anything breaks.
rdar://problem/13627985
llvm-svn: 223097
There were numerous issues here that were all entangled, and so I've
tried to do a general simplification of the logic.
1) The logic was mimicing actual GCC bugs, rather than "features". These
have been fixed in trunk GCC, and this fixes Clang as well. Notably,
the logic was always intended to be last-match-wins like any other
flag.
2) The logic for handling '-mdynamic-no-pic' was preposterously unclear.
It also allowed the use of this flag on non-Darwin platforms where it
has no actual meaning. Now this option is handled directly based on
tests of how llvm-gcc behaves, and it is only supported on Darwin.
3) The APIs for the Driver's ToolChains had the implementation ugliness
of dynamic-no-pic leaking through them. They also had the
implementation details of the LLVM relocation model flag names
leaking through.
4) The actual results of passing these flags was incorrect on Darwin in
many cases. For example, Darwin *always* uses PIC level 2 if it uses
in PIC level, and Darwin *always* uses PIC on 64-bit regardless of
the flags specified, including -fPIE. Darwin never compiles in PIE
mode, but it can *link* in PIE mode.
5) Also, PIC was not always being enabled even when PIE was. This isn't
a supported mode at all and may have caused some fallout in builds
with complex PIC and PIE interactions.
The result is (I hope) cleaner and clearer for readers. I've also left
comments and tests about some of the truly strage behavior that is
observed on Darwin platforms. We have no real testing of Windows
platforms and PIC, but I don't have the tools handy to figure that out.
Hopefully others can beef up our testing here.
Unfortunately, I can't test this for every platform. =/ If folks have
dependencies on these flags that aren't covered by tests, they may
break. I've audited and ensured that all the changes in behavior of the
existing tests are intentional and good. In particular I've tried to
make sure the Darwin behavior (which is more suprising than the Linux
behavior) also matches that of 'gcc' on my mac.
llvm-svn: 168297
- Separately check if -fPIE was specified in the command line and define both __PIC__ and __PIE__ when -fPIE is used. We need to check this separately because -fPIE will infer -fPIC even if its not explicitly used.
- Fixed existing tests.
- Added new tests for cases where both -fPIC and -fPIE is used.
Author: Tareq A. Siraj <tareq.a.siraj@intel.com>
Fixes: PR13221
Review: http://llvm-reviews.chandlerc.com/D94
llvm-svn: 167846
First, this patch cleans up the parsing of the PIC and PIE family of
options in the driver. The existing logic failed to claim arguments all
over the place resulting in kludges that marked the options as unused.
Instead actually walk all of the arguments and claim them properly.
We now treat -f{,no-}{pic,PIC,pie,PIE} as a single set, accepting the
last one on the commandline. Previously there were lots of ordering bugs
that could creep in due to the nature of the parsing. Let me know if
folks would like weird things such as "-fPIE -fno-pic" to turn on PIE,
but disable full PIC. This doesn't make any sense to me, but we could in
theory support it.
Options that seem to have intentional "trump" status (-static, -mkernel,
etc) continue to do so and are commented as such.
Next, a -pie-level flag is threaded into the frontend, rigged to
a language option, and handled preprocessor, setting up the appropriate
defines. We'll now have the correct defines when compiling with -fpie.
The one place outside of the preprocessor that was inspecting the PIC
level (as opposed to the relocation model, which is set and handled
separately, yay!) is in the GNU ObjC runtime. I changed it to exactly
preserve existing behavior. If folks want to change its behavior in the
face of PIE, they can do that in a separate patch.
Essentially the only functionality changed here is the preprocessor
defines and bug-fixes to the argument management.
Tests have been updated and extended to test all of this a bit more
thoroughly.
llvm-svn: 154291
Egor Zhdan