The test only checks the existence of the `Types CU list` line.
Unfortunately I can't make a better test because
{gcc,clang} -fuse-ld={lld,gold} --gdb-index do not give me a non-empty types CU list.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D63537
llvm-svn: 363800
Summary:
Bug: https://bugs.llvm.org/show_bug.cgi?id=39024
The bug reports that a vectorized loop is stepped through 4 times and each step through the loop seemed to show a different path. I found two problems here:
A) An incorrect line number on a preheader block (for.body.preheader) instruction causes a step into the loop before it begins.
B) Instructions in the middle block have different line numbers which give the impression of another iteration.
In this patch I give all of the middle block instructions the line number of the scalar loop latch terminator branch. This seems to provide the smoothest debugging experience because the vectorized loops will always end on this line before dropping into the scalar loop. To solve problem A I have altered llvm::SplitBlockPredecessors to accommodate loop header blocks.
I have set up a separate review D61933 for a fix which is required for this patch.
Reviewers: samsonov, vsk, aprantl, probinson, anemet, hfinkel, jmorse
Reviewed By: hfinkel, jmorse
Subscribers: jmorse, javed.absar, eraman, kcc, bjope, jmellorcrummey, hfinkel, gbedwell, hiraditya, zzheng, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D60831
> llvm-svn: 363046
llvm-svn: 363786
This allows targets to make more decisions about reserved registers
after isel. For example, now it should be certain there are calls or
stack objects in the frame or not, which could have been introduced by
legalization.
Patch by Matthias Braun
llvm-svn: 363757
This patch changes MIR stack-id from an integer to an enum,
and adds printing/parsing support for this in MIR files. The default
stack-id '0' is now renamed to 'default'.
This should make MIR tests that have stack objects with different stack-ids
more descriptive. It also clarifies code operating on StackID.
Reviewers: arsenm, thegameg, qcolombet
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D60137
llvm-svn: 363533
Current findBestLoopTop can find and move one kind of block to top, a latch block has one successor. Another common case is:
* a latch block
* it has two successors, one is loop header, another is exit
* it has more than one predecessors
If it is below one of its predecessors P, only P can fall through to it, all other predecessors need a jump to it, and another conditional jump to loop header. If it is moved before loop header, all its predecessors jump to it, then fall through to loop header. So all its predecessors except P can reduce one taken branch.
Differential Revision: https://reviews.llvm.org/D43256
llvm-svn: 363471
This is consistent with GCC's behavior (which is the defacto standard
for pubnames). Though I find the presence of enumerators from enum
classes to be a bit confusing, possibly a bug on GCC's end (since they
can't be named unqualified, unlike the other names - and names nested in
classes don't go in pubnames, for instance - presumably because one must
name the class first & that's enough to limit the scope of the search)
llvm-svn: 363349
Summary:
Before it was using the fully qualified name only for static data members.
Now it does for all variable names to match MSVC.
Reviewers: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63012
llvm-svn: 363335
Constants, including G_GLOBAL_VALUE, are all emitted into the entry block which
lets us use the vreg def assuming it dominates all other users. However, it can
cause jumpy debug behaviour since the DebugLoc attached to these MIs are from
a user instruction that could be in a different block.
Fixes PR40887.
Differential Revision: https://reviews.llvm.org/D63286
llvm-svn: 363331
This patch makes the LiveDebugValues pass consider fragments when propagating
DBG_VALUE insts between blocks, fixing PR41979. Fragment info for a variable
location is added to the open-ranges key, which allows distinct fragments to be
tracked separately. To handle overlapping fragments things become slightly
funkier. To avoid excessive searching for overlaps in the data-flow part of
LiveDebugValues, this patch:
* Pre-computes pairings of fragments that overlap, for each DILocalVariable
* During data-flow, whenever something happens that causes an open range to
be terminated (via erase), any fragments pre-determined to overlap are
also terminated.
The effect of which is that when encountering a DBG_VALUE fragment that
overlaps others, the overlapped fragments do not get propagated to other
blocks. We still rely on later location-list building to correctly handle
overlapping fragments within blocks.
It's unclear whether a mixture of DBG_VALUEs with and without fragmented
expressions are legitimate. To avoid suprises, this patch interprets a
DBG_VALUE with no fragment as overlapping any DBG_VALUE _with_ a fragment.
Differential Revision: https://reviews.llvm.org/D62904
llvm-svn: 363256
We aim to ignore changes in variable locations during the prologue and
epilogue of functions, to avoid using space documenting location changes
that aren't visible. However in D61940 / r362951 this got ripped out as
the previous implementation was unsound.
Instead, use the FrameDestroy flag to identify when we're in the epilogue
of a function, and ignore variable location changes accordingly. This fits
in with existing code that examines the FrameSetup flag.
Some variable locations get shuffled in modified tests as they now cover
greater ranges, which is what would be expected. Some additional
single-location variables are generated too. Two tests are un-xfailed,
they were only xfailed due to r362951 deleting functionality they depended
on.
Apparently some out-of-tree backends don't accurately maintain FrameDestroy
flags -- if you're an out-of-tree maintainer and see changes in variable
locations disappear due to a faulty FrameDestroy flag, it's safe to back
this change out. The impact is just slightly more debug info than necessary.
Differential Revision: https://reviews.llvm.org/D62314
llvm-svn: 363245
Summary:
Bug: https://bugs.llvm.org/show_bug.cgi?id=39024
The bug reports that a vectorized loop is stepped through 4 times and each step through the loop seemed to show a different path. I found two problems here:
A) An incorrect line number on a preheader block (for.body.preheader) instruction causes a step into the loop before it begins.
B) Instructions in the middle block have different line numbers which give the impression of another iteration.
In this patch I give all of the middle block instructions the line number of the scalar loop latch terminator branch. This seems to provide the smoothest debugging experience because the vectorized loops will always end on this line before dropping into the scalar loop. To solve problem A I have altered llvm::SplitBlockPredecessors to accommodate loop header blocks.
I have set up a separate review D61933 for a fix which is required for this patch.
Reviewers: samsonov, vsk, aprantl, probinson, anemet, hfinkel, jmorse
Reviewed By: hfinkel, jmorse
Subscribers: jmorse, javed.absar, eraman, kcc, bjope, jmellorcrummey, hfinkel, gbedwell, hiraditya, zzheng, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D60831
llvm-svn: 363046
This behavior was added in r130928 for both FastISel and SD, and then
disabled in r131156 for FastISel.
This re-enables it for FastISel with the corresponding fix.
This is triggered only when FastISel can't lower the arguments and falls
back to SelectionDAG for it.
FastISel contains a map of "register fixups" where at the end of the
selection phase it replaces all uses of a register with another
register that FastISel sometimes pre-assigned. Code at the end of
SelectionDAGISel::runOnMachineFunction is doing the replacement at the
very end of the function, while other pieces that come in before that
look through the MachineFunction and assume everything is done. In this
case, the real issue is that the code emitting COPY instructions for the
liveins (physreg to vreg) (EmitLiveInCopies) is checking if the vreg
assigned to the physreg is used, and if it's not, it will skip the COPY.
If a register wasn't replaced with its assigned fixup yet, the copy will
be skipped and we'll end up with uses of undefined registers.
This fix moves the replacement of registers before the emission of
copies for the live-ins.
The initial motivation for this fix is to enable tail calls for
swiftself functions, which were blocked because we couldn't prove that
the swiftself argument (which is callee-save) comes from a function
argument (live-in), because there was an extra copy (vreg to vreg).
A few tests are affected by this:
* llvm/test/CodeGen/AArch64/swifterror.ll: we used to spill x21
(callee-save) but never reload it because it's attached to the return.
We now don't even spill it anymore.
* llvm/test/CodeGen/*/swiftself.ll: we tail-call now.
* llvm/test/CodeGen/AMDGPU/mubuf-legalize-operands.ll: I believe this
test was not really testing the right thing, but it worked because the
same registers were re-used.
* llvm/test/CodeGen/ARM/cmpxchg-O0.ll: regalloc changes
* llvm/test/CodeGen/ARM/swifterror.ll: get rid of a copy
* llvm/test/CodeGen/Mips/*: get rid of spills and copies
* llvm/test/CodeGen/SystemZ/swift-return.ll: smaller stack
* llvm/test/CodeGen/X86/atomic-unordered.ll: smaller stack
* llvm/test/CodeGen/X86/swifterror.ll: same as AArch64
* llvm/test/DebugInfo/X86/dbg-declare-arg.ll: stack size changed
Differential Revision: https://reviews.llvm.org/D62361
llvm-svn: 362963
This commit reapplies r359426 (which was reverted in r360301 due to
performance problems) and rolls in D61940 to address the performance problem.
I've combined the two to avoid creating a span of slow-performance, and to
ease reverting if more problems crop up.
The summary of D61940: This patch removes the "ChangingRegs" facility in
DbgEntityHistoryCalculator, as its overapproximate nature can produce incorrect
variable locations. An unchanging register doesn't mean a variable doesn't
change its location.
The patch kills off everything that calculates the ChangingRegs vector.
Previously ChangingRegs spotted epilogues and marked registers as unchanging if
they weren't modified outside the epilogue, increasing the chance that we can
emit a single-location variable record. Without this feature,
debug-loc-offset.mir and pr19307.mir become temporarily XFAIL. They'll be
re-enabled by D62314, using the FrameDestroy flag to identify epilogues, I've
split this into two steps as FrameDestroy isn't necessarily supported by all
backends.
The logic for terminating variable locations at the end of a basic block now
becomes much more enjoyably simple: we just terminate them all.
Other test changes: inlined-argument.ll becomes XFAIL, but for a longer term.
The current algorithm for detecting that a variable has a single-location
doesn't work in this scenario (inlined function in multiple blocks), only other
bugs were making this test work. fission-ranges.ll gets slightly refreshed too,
as the location of "p" is now correctly determined to be a single location.
Differential Revision: https://reviews.llvm.org/D61940
llvm-svn: 362951
Variable's stack location can stretch longer than it should. If a
variable is placed at the stack in a some nested basic block its range
can be calculated to be up to the next occurrence of the variable's
DBG_VALUE, or up to the end of the function, thus covering a basic
blocks that should not be included in the variable’s location range.
This happens because the DbgEntityHistoryCalculator ends register
locations at the end of a basic block only if the variable’s location
register has been changed throughout the function, which is not the
case for the register used to reference stack objects.
This patch also tries to produce a single value location if the location
list builder managed to merge all the locations into one.
Reviewers: aprantl, dstenb, jmorse
Reviewed By: aprantl, dstenb, jmorse
Subscribers: djtodoro, ivanbaev, asowda
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D61600
llvm-svn: 362923
Incorrect Debug Variable Range was calculated while "COMPUTING LIVE DEBUG VARIABLES" stage.
Range for Debug Variable("i") computed according to current state of instructions
inside of basic block. But Register Allocator creates new instructions which were not taken
into account when Live Debug Variables computed. In the result DBG_VALUE instruction for
the "i" variable was put after these newly inserted instructions. This is incorrect.
Debug Value for the loop counter should be inserted before any loop instruction.
Differential Revision: https://reviews.llvm.org/D62650
llvm-svn: 362750
When LiveDebugValues deduces new variable's location from spill, restore or
register copy instruction it should close old variable's location. Otherwise
we can have multiple block output locations for same variable. That could lead
to inserting two DBG_VALUEs for same variable to the beginning of the successor
block which results to ignoring of first DBG_VALUE.
Reviewers: aprantl, jmorse, wolfgangp, dstenb
Reviewed By: aprantl
Subscribers: probinson, asowda, ivanbaev, petarj, djtodoro
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D62196
llvm-svn: 362373
ARM64 CodeView test was incorrectly put under test/DebugInfo/COFF folder which
runs for all all architectures. This fix moves it to a subfolder AArch64 with
lit.local.cfg which specify it supports AArch64 only.
llvm-svn: 362283
CodeView has its own register map which is defined in cvconst.h. Missing this
mapping before saving register to CodeView causes debugger to show incorrect
value for all register based variables, like variables in register and local
variables addressed by register (stack pointer + offset).
This change added mapping between LLVM register and CodeView register so the
correct register number will be stored to CodeView/PDB, it aso fixed the
mapping from CodeView register number to register name based on current
CPUType but print PDB to yaml still assumes X86 CPU and needs to be fixed.
Differential Revision: https://reviews.llvm.org/D62608
llvm-svn: 362280
Summary:
Keeps track of the enums that were used by saving them as DIGlobalVariables,
since CodeView emits debug info for global constants.
Reviewers: rnk
Subscribers: aprantl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62635
llvm-svn: 362166
Summary:
Add static data members to IR debug info's list of global variables
so that they are emitted as S_CONSTANT records.
Related to https://bugs.llvm.org/show_bug.cgi?id=41615.
Reviewers: rnk
Subscribers: aprantl, cfe-commits, llvm-commits, thakis
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62167
llvm-svn: 362038
Summary:
When DwarfDebug::buildLocationList() encountered an undef debug value,
it would truncate all open values, regardless if they were overlapping or
not. This patch fixes so that it only does that for overlapping fragments.
This change unearthed a bug that I had introduced in D57511,
which I have fixed in this patch. The code in DebugHandlerBase that
changes labels for parameter debug values could break DwarfDebug's
assumption that the labels for the entries in the debug value history
are monotonically increasing. Before this patch, that bug could result
in location list entries whose ending address was lower than the
beginning address, and with the changes for undef debug values that this
patch introduces it could trigger an assertion, due to attempting to
emit location list entries with empty ranges. A reproducer for the bug
is added in param-reg-const-mix.mir.
Reviewers: aprantl, jmorse, probinson
Reviewed By: aprantl
Subscribers: javed.absar, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D62379
llvm-svn: 361820
This lead to errors when dumping binaries with v4 and v5 units linked
together (but could've also errored on v5 units that did/didn't use
str_offsets).
Also improves error handling and messages around invalid str_offsets
contributions.
llvm-svn: 361683
This test case was incorrect because it mixed DWARF32 and DWARF64 for a
single unit (DWARF32 unit referencing a DWARF64 str_offsets section). So
fix enough of the unit parsing for DWARF64 and make the test valid.
(not sure if anyone needs DWARF64 support though - support in
libDebugInfoDWARF has been added piecemeal and LLVM doesn't produce it
at all)
llvm-svn: 361582
This reverts commit rr360902. It caused an assertion failure in
lib/IR/DebugInfoMetadata.cpp: Assertion `(OffsetInBits + SizeInBits <=
FragmentSizeInBits) && "new fragment outside of original fragment"'
failed.
PR41931.
llvm-svn: 361246
This option provides only the base filename, not a full relative path.
Part of the fix for PR41839.
Differential Revision: https://reviews.llvm.org/D62071
llvm-svn: 361245
Summary:
This emits S_CONSTANT records for global variables.
Currently this emits records for the global variables already being tracked in the
LLVM IR metadata, which are just constant global variables; we'll also want S_CONSTANTs
for static data members and enums.
Related to https://bugs.llvm.org/show_bug.cgi?id=41615
Reviewers: rnk
Subscribers: aprantl, hiraditya, llvm-commits, thakis
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61926
llvm-svn: 360948
Fixes issue: https://bugs.llvm.org/show_bug.cgi?id=40645
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop casts
impossible. With the recent addition of DW_OP_LLVM_convert this salvaging is
now possible, and so can be used to fix the attached bug as well as any cases
where SExt instruction results are lost in the debugging metadata. This patch
introduces this fix by expanding the salvage debug info method to cover these
cases using the new operator.
Differential revision: https://reviews.llvm.org/D61184
llvm-svn: 360902
Trace through multiple COPYs when looking for a physreg source. Add
hinting for vregs that will be copied into physregs (we only hinted
for vregs getting copied to a physreg previously). Give hinted a
register a bonus when deciding which value to spill. This is part of
my rewrite regallocfast series. In fact this one doesn't even have an
effect unless you also flip the allocation to happen from back to
front of a basic block. Nonetheless it helps to split this up to ease
review of D52010
Patch by Matthias Braun
llvm-svn: 360887
Fixes issue: https://bugs.llvm.org/show_bug.cgi?id=40645
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop
casts impossible. With the recent addition of DW_OP_LLVM_convert this
salvaging is now possible, and so can be used to fix the attached bug as
well as any cases where SExt instruction results are lost in the
debugging metadata. This patch introduces this fix by expanding the
salvage debug info method to cover these cases using the new operator.
Differential revision: https://reviews.llvm.org/D61184
llvm-svn: 360772
The 3-field form was introduced by D3499 in 2014 and the legacy 2-field
form was planned to be removed in LLVM 4.0
For the textual format, this patch migrates the existing 2-field form to
use the 3-field form and deletes the compatibility code.
test/Verifier/global-ctors-2.ll checks we have a friendly error message.
For bitcode, lib/IR/AutoUpgrade UpgradeGlobalVariables will upgrade the
2-field form (add i8* null as the third field).
Reviewed By: rnk, dexonsmith
Differential Revision: https://reviews.llvm.org/D61547
llvm-svn: 360742
The condition !AddrPool.empty() is tested before attachRangesOrLowHighPC(), which may add an entry to AddrPool. We emit DW_AT_low_pc (DW_FORM_addrx) but may incorrectly omit DW_AT_addr_base for LineTablesOnly. This can be easily reproduced:
clang -gdwarf-5 -gmlt -c a.cc
Fix this by moving !AddrPool.empty() below.
This was discovered while investigating an lld crash (fixed by D61889) on such object files: ld.lld --gdb-index a.o
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D61891
llvm-svn: 360678
Follow up to r359122, after a bug was reported in it - the original
change too aggressively tried to move related types out of type units,
which included unnamed types (like array types) which can't reasonably
be declared-but-not-defined.
A step beyond that is that some types in type units can be anonymous, if
they are types with a name for linkage purposes (eg: "typedef struct { }
x;"). So ensure those don't get turned into plain declarations (without
signatures) because, lacking names, they can't be resolved to the
definition.
[Also include a fix for llvm-dwarfdump/libDebugInfoDWARF to pretty print
types in type units]
llvm-svn: 360458
In certain circumstances, optimizations pick line numbers from debug
intrinsic instructions as the new location for altered instructions. This
is problematic because the line number of a debugging intrinsic is
meaningless (it doesn't produce any machine instruction), only the scope
information is valid. The result can be the line number of a variable
declaration "leaking" into real code from debugging intrinsics, making the
line table un-necessarily jumpy, and potentially different with / without
variable locations.
Fix this by using zero line numbers when promoting dbg.declare intrinsics
into dbg.values: this is safe for debug intrinsics as their line numbers
are meaningless, and reduces the scope for damage / misleading stepping
when optimizations pick locations from the wrong place.
Differential Revision: https://reviews.llvm.org/D59272
llvm-svn: 360415
as it was causing significant compile time regressions.
This reverts commit r359426 while we come up with testcases and additional ideas.
llvm-svn: 360301
DWARF5, 2.12 20ff says that
Any debugging information entry representing a pointer or reference
type [may have a DW_AT_address_class attribute].
The existing code (https://reviews.llvm.org/D29670) seems to take a
quite literal interpretation of that wording. I don't see a reason why
an rvalue reference isn't a reference type in the spirit of that
paragraph. This patch allows rvalue references to also have address
spaces.
rdar://problem/50511483
Differential Revision: https://reviews.llvm.org/D61625
llvm-svn: 360176
This fixes the https://bugs.llvm.org/show_bug.cgi?id=41355.
Previously with -r we printed relocation section name instead of the target section name.
It was like this: "RELOCATION RECORDS FOR [.rel.text]"
Now it is: "RELOCATION RECORDS FOR [.text]"
Also when relocation target section has more than one relocation section,
we did not combine the output. Now we do.
Differential revision: https://reviews.llvm.org/D61312
llvm-svn: 360143
Summary:
Prior to DWARF v5, a directory index of 0 represents DW_AT_comp_dir.
In DWARF v5, the index starts with 0 and Entry.DirIdx is the index into
Prologue.IncludeDirectories.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D61253
llvm-svn: 360015
Fangrui Song