As indicated by Table 1-1 in Intel Architecture Instruction Set Extensions and Future Features Programming Reference from October 2017.
llvm-svn: 316592
Adding the scheduling information for the Browadwell (BDW) CPU target.
This patch adds the instruction scheduling information for the Broadwell (BDW) architecture target by adding the file X86SchedBroadwell.td located under the X86 Target.
We used the scheduling information retrieved from the Broadwell architects in order to create the file.
The scheduling information includes latency, number of micro-Ops and used ports by each BDW instruction.
The patch continues the scheduling replacement and insertion effort started with the SandyBridge (SNB) target in r310792, the Haswell (HSW) target in r311879, the SkylakeClient (SKL) target in rL313613 + rL315978 and the SkylakeServer (SKX) in rL315175.
Performance fluctuations may be expected due to code alignment effects.
Reviewers: zvi, RKSimon, craig.topper
Differential Revision: https://reviews.llvm.org/D39054
Change-Id: If6f799e5ff60e1091c8d43b05ea78c53581bae01
llvm-svn: 316492
Turns out we have no patterns on the instructions that were using this feature flag for other reasons. These instructions are slow on all modern CPUs so it seems unlikely that we will spend any effort supporting these instructions going forward. So we might as well just kill of the feature flag and just fix up the comments.
llvm-svn: 315862
Summary: I see nothing in Agner Fog's tables to indicate that this improved between Ivy Bridge and Haswell. It's also set for all Atom CPUs so I assume KNL should have it too.
Reviewers: RKSimon, zvi, gadi.haber
Reviewed By: gadi.haber
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38890
llvm-svn: 315859
This adds Intel's Knights Mill CPU to valid CPU names for the backend. For now its an alias of "knl", but ultimately we need to support AVX5124FMAPS and AVX5124VNNIW instruction sets for it.
Differential Revision: https://reviews.llvm.org/D38811
llvm-svn: 315722
Adding the scheduling information for the SkylakeServer (SKX) target.
This patch adds the instruction scheduling information for the SkylakeServer (SKX) architecture target by adding the file X86SchedSkylakeServer.td located under the X86 Target.
We used the scheduling information retrieved from the Skylake architects in order to create the file.
The scheduling information includes latency, number of micro-Ops and used ports by each SKL instruction.
The patch continues the scheduling replacement and insertion effort started with the SNB target in r310792, the HSW target in r311879 and the SkylakeClient (SKL) target in rL313613.
Please expect some performance fluctuations due to code alignment effects.
Reviewers: zvi, RKSimon, craig.topper, chandlerc, aymanmu
Differential Revision: https://reviews.llvm.org/D38443
Change-Id: I5c228fcc09e9e5a99b6116e62b356c4f9b971185
llvm-svn: 315175
This patch adds the instruction scheduling information for the SkylakeClient (SKL) architecture target by adding the file X86SchedSkylakeClient.td located under the X86 Target.
We used the scheduling information retrieved from the Skylake architects in order to create the file.
The scheduling information includes latency, number of micro-Ops and used ports by each SKL instruction.
The patch continues the scheduling replacement and insertion effort started with the SNB target in r307529 and r310792 and for HSW in r311879.
Please expect some performance fluctuations due to code alignment effects.
Reviewers: craig.topper, zvi, chandlerc, igorb, aymanmus, RKSimon, delena
Differential Revision: https://reviews.llvm.org/D37294
llvm-svn: 313613
Adding x86 Processor families to initialize several uArch properties (based on the family)
This patch shows how gather cost can be initialized based on the proc. family
Differential Revision: https://reviews.llvm.org/D35348
llvm-svn: 313132
Currently we start applying this on Haswell and newer. I don't believe anything changed in the Haswell architecture to make this the right cutoff point. The partial flag handling around this has been roughly the same since Sandybridge.
Differential Revision: https://reviews.llvm.org/D37250
llvm-svn: 312099
Summary:
Currently we determine if macro fusion is supported based on the AVX flag as a proxy for the processor being Sandy Bridge".
This is really strange as now AMD supports AVX. It also means if user explicitly disables AVX we disable macro fusion.
This patch adds an explicit macro fusion feature. I've also enabled for the generic 64-bit CPU (which doesn't have AVX)
This is probably another candidate for being in the MI layer, but for now I at least wanted to correct the overloading of the AVX feature.
Reviewers: spatel, chandlerc, RKSimon, zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37280
llvm-svn: 312097
Summary: Knights Landing, because it is Atom derived, has slow two memory operand instructions. Mark the Knights Landing CPU model accordingly.
Patch by David Zarzycki.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37224
llvm-svn: 311979
FeatureSlowUAMem32.
The idea was to mark things that are slow on widely available processors
as slow in the generic CPU so that the code generated for that CPU would
be fast across those processors. However, for this feature that doesn't
work out very well at all.
The problem here is that you can very easily enable AVX or AVX2 on top
of this generic CPU. For example, this can happen just by using AVX2
intrinsics from Clang within a region of code guarded by a dynamic CPU
feature test. When you do that, the generated code with SlowUAMem32 set
is ... amazingly slower. The problem is that there really aren't very
good alternatives to the unaligned loads, and so our vector codegen
regresses significantly.
The other issue is that there are plenty of AMD CPUs with AVX1 that
don't set FeatureSlowUAMem32 and so we shouldn't just check for AVX2
instead of this special feature. =/
It would be nice to have the target attriute logic be able to
enable/disable more than just one feature at a time and control this in
a more fine grained and useful way, but that doesn't seem easy. Given
that it is only Sandybridge and Ivybridge that set this feature, for now
I'm just backing it out of the generic CPU. That has the additional
advantage of going back to the previous state that people seemed vaguely
happy with.
llvm-svn: 311740
widely used processors.
This occured to me when I saw that we were generating 'inc' and 'dec'
when for Haswell and newer we shouldn't. However, there were a few "X is
slow" things that we should probably just set.
I've avoided any of the "X is fast" features because most of those would
be pretty serious regressions on processors where X isn't actually fast.
The slow things are likely to be negligible costs on processors where
these aren't slow and a significant win when they are slow.
In retrospect this seems somewhat obvious. Not sure why we didn't do
this a long time ago.
Differential Revision: https://reviews.llvm.org/D36947
llvm-svn: 311318
Summary:
This patch adds the following
1. Adds a skeleton scheduler model for AMD Znver1.
2. Introduces the znver1 execution units and pipes.
3. Caters the instructions based on the generic scheduler classes.
4. Further additions to the scheduler model with instruction itineraries will be carried out incrementally based on
a. Instructions types
b. Registers used
5. Since itineraries are not added based on instructions, throughput information are bound to change when incremental changes are added.
6. Scheduler testcases are modified accordingly to suit the new model.
Patch by Ganesh Gopalasubramanian. With minor formatting tweaks from me.
Reviewers: craig.topper, RKSimon
Subscribers: javed.absar, shivaram, ddibyend, vprasad
Differential Revision: https://reviews.llvm.org/D35293
llvm-svn: 308411
Summary: I believe this should be supported on GLM since RDSEED is.
Reviewers: m_zuckerman, zvi, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34828
llvm-svn: 307060
AVX512_VPOPCNTDQ is a new feature set that was published by Intel.
The patch represents the LLVM side of the addition of two new intrinsic based instructions (vpopcntd and vpopcntq).
Differential Revision: https://reviews.llvm.org/D33169
llvm-svn: 303858
According to Intel's Optimization Reference Manual for SNB+:
" For LEA instructions with three source operands and some specific situations, instruction latency has increased to 3 cycles, and must
dispatch via port 1:
- LEA that has all three source operands: base, index, and offset
- LEA that uses base and index registers where the base is EBP, RBP,or R13
- LEA that uses RIP relative addressing mode
- LEA that uses 16-bit addressing mode "
This patch currently handles the first 2 cases only.
Differential Revision: https://reviews.llvm.org/D32277
llvm-svn: 303333
According to Intel's Optimization Reference Manual for SNB+:
" For LEA instructions with three source operands and some specific situations, instruction latency has increased to 3 cycles, and must
dispatch via port 1:
- LEA that has all three source operands: base, index, and offset
- LEA that uses base and index registers where the base is EBP, RBP,or R13
- LEA that uses RIP relative addressing mode
- LEA that uses 16-bit addressing mode "
This patch currently handles the first 2 cases only.
Differential Revision: https://reviews.llvm.org/D32277
llvm-svn: 303183
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Reapplied - this time without changing line endings of existing files.
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302041
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302028
when the subtarget has fast strings.
This has two advantages:
- Speed is improved. For example, on Haswell thoughput improvements increase
linearly with size from 256 to 512 bytes, after which they plateau:
(e.g. 1% for 260 bytes, 25% for 400 bytes, 40% for 508 bytes).
- Code is much smaller (no need to handle boundaries).
llvm-svn: 300957
VZEROUPPER should not be issued on Knights Landing (KNL), but on Skylake-avx512 it should be.
Differential Revision: https://reviews.llvm.org/D29874
llvm-svn: 296859
Summary:
Sandy Bridge and later CPUs have better throughput using a SHLD to implement rotate versus the normal rotate instructions. Additionally it saves one uop and avoids a partial flag update dependency.
This patch implements this change on any Sandy Bridge or later processor without BMI2 instructions. With BMI2 we will use RORX as we currently do.
Reviewers: zvi
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30181
llvm-svn: 295697
We only implemented it for one of the 3 HLE instructions and that instruction is also under the RTM flag. Clang only implements the RTM flag from its command line.
llvm-svn: 294562
This patch does the following.
1. Adds an Intrinsic int_x86_clzero which works with __builtin_ia32_clzero
2. Identifies clzero feature using cpuid info. (Function:8000_0008, Checks if EBX[0]=1)
3. Adds the clzero feature under znver1 architecture.
4. The custom inserter is added in Lowering.
5. A testcase is added to check the intrinsic.
6. The clzero instruction is added to assembler test.
Patch by Ganesh Gopalasubramanian with a couple formatting tweaks, a disassembler test, and using update_llc_test.py from me.
Differential revision: https://reviews.llvm.org/D29385
llvm-svn: 294558
64-bit integer division in Intel CPUs is extremely slow, much slower
than 32-bit division. On the other hand, 8-bit and 16-bit divisions
aren't any faster. The only important exception is Atom where DIV8
is fastest. Because of that, the patch
1) Enables bypassing of 64-bit division for Atom, Silvermont and
all big cores.
2) Modifies 64-bit bypassing to use 32-bit division instead of
16-bit one. This doesn't make the shorter division slower but
increases chances of taking it. Moreover, it's much more likely
to prove at compile-time that a value fits 32 bits and doesn't
require a run-time check (e.g. zext i32 to i64).
Differential Revision: https://reviews.llvm.org/D28196
llvm-svn: 291800
Summary:
This patch enables the following
1. AMD family 17h architecture using "znver1" tune flag (-march, -mcpu).
2. ISAs that are enabled for "znver1" architecture.
3. Checks ADX isa from cpuid to identify "znver1" flag when -march=native is used.
4. ISAs FMA4, XOP are disabled as they are dropped from amdfam17.
5. For the time being, it uses the btver2 scheduler model.
6. Test file is updated to check this flag.
This item is linked to clang review item https://reviews.llvm.org/D28018
Patch by Ganesh Gopalasubramanian
Reviewers: RKSimon, craig.topper
Subscribers: vprasad, RKSimon, ashutosh.nema, llvm-commits
Differential Revision: https://reviews.llvm.org/D28017
llvm-svn: 291543
Summary:
Prefer expansions such as: pmullw,pmulhw,unpacklwd,unpackhwd over pmulld.
On Silvermont [source: Optimization Reference Manual]:
PMULLD has a throughput of 1/11 [instruction/cycles].
PMULHUW/PMULHW/PMULLW have a throughput of 1/2 [instruction/cycles].
Fixes pr31202.
Analysis of this issue was done by Fahana Aleen.
Reviewers: wmi, delena, mkuper
Subscribers: RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D27203
llvm-svn: 288844
Summary:
This is needed to make the v64i8 and v32i16 types legal for the 512-bit VBMI instructions. Fixes PR30912.
Reviewers: delena, zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26322
llvm-svn: 286339
This change adds transformations such as:
zext(or(setcc(eq, (cmp x, 0)), setcc(eq, (cmp y, 0))))
To:
srl(or(ctlz(x), ctlz(y)), log2(bitsize(x))
This optimisation is beneficial on Jaguar architecture only, where lzcnt has a good reciprocal throughput.
Other architectures such as Intel's Haswell/Broadwell or AMD's Bulldozer/PileDriver do not benefit from it.
For this reason the change also adds a "HasFastLZCNT" feature which gets enabled for Jaguar.
Differential Revision: https://reviews.llvm.org/D23446
llvm-svn: 284248
On modern Intel processors hardware SQRT in many cases is faster than RSQRT
followed by Newton-Raphson refinement. The patch introduces a simple heuristic
to choose between hardware SQRT instruction and Newton-Raphson software
estimation.
The patch treats scalars and vectors differently. The heuristic is that for
scalars the compiler should optimize for latency while for vectors it should
optimize for throughput. It is based on the assumption that throughput bound
code is likely to be vectorized.
Basically, the patch disables scalar NR for big cores and disables NR completely
for Skylake. Firstly, scalar SQRT has shorter latency than NR code in big cores.
Secondly, vector SQRT has been greatly improved in Skylake and has better
throughput compared to NR.
Differential Revision: https://reviews.llvm.org/D21379
llvm-svn: 277725
Summary:
MONITORX/MWAITX instructions provide similar capability to the MONITOR/MWAIT
pair while adding a timer function, such that another termination of the MWAITX
instruction occurs when the timer expires. The presence of the MONITORX and
MWAITX instructions is indicated by CPUID 8000_0001, ECX, bit 29.
The MONITORX and MWAITX instructions are intercepted by the same bits that
intercept MONITOR and MWAIT. MONITORX instruction establishes a range to be
monitored. MWAITX instruction causes the processor to stop instruction execution
and enter an implementation-dependent optimized state until occurrence of a
class of events.
Opcode of MONITORX instruction is "0F 01 FA". Opcode of MWAITX instruction is
"0F 01 FB". These opcode information is used in adding tests for the
disassembler.
These instructions are enabled for AMD's bdver4 architecture.
Patch by Ganesh Gopalasubramanian!
Reviewers: echristo, craig.topper, RKSimon
Subscribers: RKSimon, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19795
llvm-svn: 269911
For compilations with no explicit cpu specified, this exhibits
nice gains on Silvermont, with neutral performance on big cores.
Differential Revision: http://reviews.llvm.org/D19138
llvm-svn: 267809
Craig Topper