When the sigreturn trampoline is found the unw_proc_info_t.end_ip need to be set to
indicate a stack frame is found.
Reviewed By: cjdb, #libunwind, MaskRay
Differential Revision: https://reviews.llvm.org/D124522
Avoid repeating CMake checks across runtimes by unifying names of
variables used for results to leverage CMake caching.
Differential Revision: https://reviews.llvm.org/D110005
Summary:
This is an add-on patch to address comments.
- Replace #elif in file <assembly.h> with #else as suggested;
- Reversed the indentation changes in the main patch.
Differential Revision: https://reviews.llvm.org/D100132
Summary:
This patch contains the implementation of the unwinder for IBM AIX.
AIX does not support the eh_frame section. Instead, the traceback table located at the end of each function provides the information for stack unwinding and EH. In this patch macro _LIBUNWIND_SUPPORT_TBTAB_UNWIND is used to guard code for AIX traceback table based unwinding. Function getInfoFromTBTable() and stepWithTBTable() are added to get the EH information from the traceback table and to step up the stack respectively.
There are two kinds of LSDA information for EH on AIX, the state table and the range table. The state table is used by the previous version of the IBM XL compiler, i.e., xlC and xlclang++. The DWARF based range table is used by AIX clang++. The traceback table has flags to differentiate these cases. For the range table, relative addresses are calculated using a base of DW_EH_PE_datarel, which is the TOC base of the module where the function of the current frame belongs.
Two personality routines are employed to handle these two different LSDAs, __xlcxx_personality_v0() for the state table and __xlcxx_personality_v1() for the range table. Since the traceback table does not have the information of the personality for the state table approach, its personality __xlcxx_personality_v0() is dynamically resolved as the handler for the state table. For the range table, the locations of the LSDA and its associated personality routine are found in the traceback table.
Assembly code for 32- and 64-bit PowerPC in UnwindRegistersRestore.S and UnwindRegistersSave.S are modified so that it can be consumed by the GNU flavor assembler and the AIX assembler. The restoration of vector registers does not check VRSAVE on AIX because VRSAVE is not used in the AIX ABI.
Reviewed by: MaskRay, compnerd, cebowleratibm, sfertile, libunwind
Differential Revision: https://reviews.llvm.org/D100132
For some reason, we've been going without a MSAN CI job, even though
even run-buildbot defined a generic-msan job. This must have been an
oversight that went unnoticed. Thanks to @EricWF for the catch.
Differential Revision: https://reviews.llvm.org/D120851
This allows us to detect whether we're being compiled with LLVM's libunwind
more easily, without CMake having to set explicit variables.
As discussed in https://llvm.org/D119538.
Differential Revision: https://reviews.llvm.org/D121015
Instead, folks can use the equivalent variables provided by CMake
to set those. This removal aims to reduce complexity and potential
for confusion when setting the target triple for building the runtimes,
and make it correct when `CMAKE_OSX_ARCHITECTURES` is used (right now
both `-arch` and `--target=` will end up being passed, which is downright
incorrect).
Differential Revision: https://reviews.llvm.org/D112155
We should not assume that the cet.h header exists just because
we're on x86 linux. Only include it if __CET__ is defined. This
makes the code more similar to what compiler-rt does in
ee423d93ea/compiler-rt/lib/builtins/assembly.h (L17)
(though that one also has a __has_include() check -- I've not found
that to be necessary).
Differential Revision: https://reviews.llvm.org/D119697
We are moving away from building the runtimes with LLVM_ENABLE_PROJECTS,
however the documentation was largely outdated. This commit updates all
the documentation I could find to use LLVM_ENABLE_RUNTIMES instead of
LLVM_ENABLE_PROJECTS for building runtimes.
Note that in the near future, libcxx, libcxxabi and libunwind will stop
supporting being built with LLVM_ENABLE_PROJECTS altogether. I don't know
what the plans are for other runtimes like libc, openmp and compiler-rt,
so I didn't make any changes to the documentation that would imply
something for those projects.
Once this lands, I will also cherry-pick this on the release/14.x branch
to make sure that LLVM's documentation is up-to-date and reflects what
we intend to support in the future.
Differential Revision: https://reviews.llvm.org/D119351
The warning was introduced with the recently merged SPARCv9
support in 2b9554b885.
The cast matches the existing surrounding cases.
Differential Revision: https://reviews.llvm.org/D119353
Standalone build have been deprecated for some time now, so this
commit removes support for those builds entirely from libc++, libc++abi
and libunwind.
This, along with the removal of other legacy ways to build, will allow
for major build system simplifications.
Differential Revision: https://reviews.llvm.org/D119255
Add SPARC to the list of platforms for which we provide a full
unwind implementation which leads to _Unwind_Backtrace being defined within
libunwind.so.
Likewise for PPC (see D118320 for background).
Reviewed By: #libunwind, MaskRay, Arfrever
Differential Revision: https://reviews.llvm.org/D119068
Adds libunwind support for SPARCv9 (aka sparc64). This is a rebase of @kettenis' patch D32450, which I created (with his permission) because the original review has become inactive.
The changes are of a cosmetic nature to make it fit better with the new code style, and to reuse the existing SPARCv8 code, whenever possible.
Please let me know if I posted this on the wrong place. Also, the summary of the original review is reproduced below:
> This adds unwinder support for 64-bit SPARC (aka SPARCv9). The implementation was done on OpenBSD/sparc64, so it takes StackGhost into account:
>
> https://www.usenix.org/legacy/publications/library/proceedings/sec01/full_papers/frantzen/frantzen_html/index.html
>
> Since StackGhost xor's return addresses with a random cookie before storing them on the stack, the unwinder has to do some extra work to recover those. This is done by introducing a new kRegisterInCFADecrypt "location" type that is used to implement the DW_CFA_GNU_window_save opcode. That implementation is SPARC-specific, but should work for 32-bit SPARC as well. DW_CFA_GNU_window_save is only ever generated on SPARC as far as I know.
Co-authored-by: Mark Kettenis
Reviewed By: #libunwind, thesamesam, MaskRay, Arfrever
Differential Revision: https://reviews.llvm.org/D116857
We previously had a few varied definitions of this floating around.
I had tried to make the one installed with LLVM handle all the cases, and then made the others use it, but this ran into issues with `HandleOutOfTreeLLVM` not working for compiler-rt, and also `CMAKE_EXE_LINKER_FLAGS` not working right without `CMP0056` set to the new behavior.
My compromise solution is this:
- No not completely deduplicate: the runtime libs will instead use a version that still exists as part of the internal and not installed common shared CMake utilities. This avoids `HandleOutOfTreeLLVM` or a workaround for compiler-rt.
- Continue to use `CMAKE_REQUIRED_FLAGS`, which effects compilation and linking. Maybe this is unnecessary, but it's safer to leave that as a future change. Also means we can avoid `CMP0056` for now, to try out later, which is good incrementality too.
- Call it `llvm_check_compiler_linker_flag` since it, in fact is about both per its implementation (before and after this patch), so there is no name collision.
In the future, we might still enable CMP0056 and make compiler-rt work with HandleOutOfTreeLLVM, which case we delete `llvm_check_compiler_flag` and go back to the old way (as these are, in fact, linking related flags), but that I leave for someone else as future work.
The original issue was reported to me in https://reviews.llvm.org/D116521#3248117 as
D116521 made clang and LLVM use the common cmake utils.
Reviewed By: sebastian-ne, phosek, #libunwind, #libc, #libc_abi, ldionne
Differential Revision: https://reviews.llvm.org/D117537
Originally reported downstream in Gentoo: https://bugs.gentoo.org/832140
```
/var/tmp/portage/sys-libs/llvm-libunwind-13.0.0/work/libunwind/src/libunwind.cpp:77:3: error: #error Architecture not supported
77 | # error Architecture not supported
| ^~~~~
[...]
/var/tmp/portage/sys-libs/llvm-libunwind-13.0.0/work/libunwind/src/libunwind.cpp: In function ‘int __unw_init_local(unw_cursor_t*, unw_context_t*)’:
/var/tmp/portage/sys-libs/llvm-libunwind-13.0.0/work/libunwind/src/libunwind.cpp:80:57: error: ‘REGISTER_KIND’ was not declared in this scope
80 | new (reinterpret_cast<UnwindCursor<LocalAddressSpace, REGISTER_KIND> *>(cursor))
| ^~~~~~~~~~~~~
[...]
```
PPC is actually a supported architecture, but GCC (tested with 11.2.0)
on powerpc32 seems to only define: `__PPC__, _ARCH_PPC, __PPC,
__powerpc` and //not// `__ppc__`.
This instead uses `__powerpc__` which should be around on PPC32
and PPC64 (but we check it after PPC64, so it's fine).
Signed-off-by: Sam James <sam@gentoo.org>
Differential Revision: https://reviews.llvm.org/D118320
We previously had a few varied definitions of this floating around. I made the one installed with LLVM handle all the cases, and then made the others use it.
This issue was reported to me in https://reviews.llvm.org/D116521#3248117 as
D116521 made clang and llvm use the common cmake utils.
Reviewed By: sebastian-ne, phosek, #libunwind, #libc, #libc_abi, ldionne
Differential Revision: https://reviews.llvm.org/D117537
Its defaulting logic must go after `project(..)` to work correctly, but `project(..)` is often in a standalone condition making this
awkward, since the rest of the condition code may also need GNUInstallDirs.
The good thing is there are the various standalone booleans, which I had missed before. This makes splitting the conditional blocks less awkward.
Reviewed By: arichardson, phosek, beanz, ldionne, #libunwind, #libc, #libc_abi
Differential Revision: https://reviews.llvm.org/D117639
This is better than libunwind and libcxxabi fishing it out of libcxx's
module directory.
It is done in prepartion for a better version of D117537 which deduplicates
CMake logic instead of just renaming to avoid a name clash.
Reviewed By: phosek, #libunwind, #libc_abi, Ericson2314
Differential Revision: https://reviews.llvm.org/D117617
These two are not conceptually the same; the former is a pointer shoved
in an integer, the latter is an offset or length. On the architectures
supported by libunwind, these two have the same underlying type, namely
unsigned int on ILP32, unsigned long on LP64 and unsigned long long on
LLP64. However, on CHERI, and thus Arm's Morello, they are not the same,
as pointers are hardware capabilities that carry additional metadata
including bounds and permissions, which is preserved in uintptr_t but
not in size_t. Thus, fix all length variables to be of type size_t not
uintptr_t, as we have done downstream for a while in CHERI LLVM but did
not get round to upstreaming.
Note that dyld_unwind_sections is currently defined in Apple's headers
as genuinely using uintptr_t to represent lengths. This is a bad API and
should be fixed, which would be totally API and ABI compatible due to
size_t and uintptr_t being the same type on all supported Apple systems,
but our definition is left matching theirs until such a time as they fix
their bogus types.
This is intended to be an NFC change on all architectures supported by
LLVM upstream, only being a functional change for CHERI downstream in
CHERI LLVM.
This is the original patch in my GNUInstallDirs series, now last to merge as the final piece!
It arose as a new draft of D28234. I initially did the unorthodox thing of pushing to that when I wasn't the original author, but since I ended up
- Using `GNUInstallDirs`, rather than mimicking it, as the original author was hesitant to do but others requested.
- Converting all the packages, not just LLVM, effecting many more projects than LLVM itself.
I figured it was time to make a new revision.
I have used this patch series (and many back-ports) as the basis of https://github.com/NixOS/nixpkgs/pull/111487 for my distro (NixOS), which was merged last spring (2021). It looked like people were generally on board in D28234, but I make note of this here in case extra motivation is useful.
---
As pointed out in the original issue, a central tension is that LLVM already has some partial support for these sorts of things. Variables like `COMPILER_RT_INSTALL_PATH` have already been dealt with. Variables like `LLVM_LIBDIR_SUFFIX` however, will require further work, so that we may use `CMAKE_INSTALL_LIBDIR`.
These remaining items will be addressed in further patches. What is here is now rote and so we should get it out of the way before dealing more intricately with the remainder.
Reviewed By: #libunwind, #libc, #libc_abi, compnerd
Differential Revision: https://reviews.llvm.org/D99484
This is the original patch in my GNUInstallDirs series, now last to merge as the final piece!
It arose as a new draft of D28234. I initially did the unorthodox thing of pushing to that when I wasn't the original author, but since I ended up
- Using `GNUInstallDirs`, rather than mimicking it, as the original author was hesitant to do but others requested.
- Converting all the packages, not just LLVM, effecting many more projects than LLVM itself.
I figured it was time to make a new revision.
I have used this patch series (and many back-ports) as the basis of https://github.com/NixOS/nixpkgs/pull/111487 for my distro (NixOS), which was merged last spring (2021). It looked like people were generally on board in D28234, but I make note of this here in case extra motivation is useful.
---
As pointed out in the original issue, a central tension is that LLVM already has some partial support for these sorts of things. Variables like `COMPILER_RT_INSTALL_PATH` have already been dealt with. Variables like `LLVM_LIBDIR_SUFFIX` however, will require further work, so that we may use `CMAKE_INSTALL_LIBDIR`.
These remaining items will be addressed in further patches. What is here is now rote and so we should get it out of the way before dealing more intricately with the remainder.
Reviewed By: #libunwind, #libc, #libc_abi, compnerd
Differential Revision: https://reviews.llvm.org/D99484
In D116873 I did this for libunwind prior to defining a new install path
variable. But I think the change is good on its own, and libc++{,abi}
could also use it.
libc++ needed the base header var defined above the conditional part to
use it for the prefi+ed headers in the non-target-specific case. For
consistency, I therefore put the unconditional ones above for all 3
libs, which is why I touched the libunwind code (seeing that it had the
core change already)
Reviewed By: phosek, #libunwind, #libc, #libc_abi, ldionne
Differential Revision: https://reviews.llvm.org/D116988
This is created on analogy with the other CACHE PATHs in this package,
and other `*_INSTALL_INCLUDE_DIR` in other packages.
The branching is adjusted to deduplicate some existing code, and
likewise avoid having to define this new variable more than once.
This will be used for D99484.
Reviewed By: #libunwind, compnerd
Differential Revision: https://reviews.llvm.org/D116873
When building libcxx, libcxxabi, and libunwind the build environment may
specify any number of sanitizers. For some build feature tests these
sanitizers must be disabled to prevent spurious linking errors. With
-fsanitize= this is straight forward with -fno-sanitize=all. With
-fsanitize-coverage= there is no -fno-sanitize-coverage=all, but there
is the equivalent undocumented but tested -fsanitize-coverage=0.
The current build rules fail to disable 'trace-pc-guard'. By disabling
all sanitize-coverage flags, including 'trace-pc-guard', possible
spurious linker errors are prevented. In particular, this allows libcxx,
libcxxabi, and libunwind to be built with HonggFuzz.
CMAKE_REQUIRED_FLAGS is extra compile flags when running CMake build
configuration steps (like check_cxx_compiler_flag). It does not affect
the compile flags for the actual build of the project (unless of course
these flags change whether or not a given source compiles and links or
not). So libcxx, libcxxabi, and libunwind will still be built with any
specified sanitize-coverage as before. The build configuration steps
(which are mostly checking to see if certain compiler flags are
available) will not try to compile and link "int main() { return 0;}"
(or other specified source) with sanitize-coverage (which can fail to
link at this stage in building, since the final compile flags required
are yet to be determined).
The change to LIBFUZZER_CFLAGS was done to keep it consistent with the
obvious intention of disabling all sanitize-coverage. This appears to
be intentional, preventing the fuzzer driver itself from showing up in
any coverage calculations.
Reviewed By: #libunwind, #libc, #libc_abi, ldionne, phosek
Differential Revision: https://reviews.llvm.org/D116050
Although we moved to Github Issues. The bug report message refers to
Bugzilla still. This patch tries to update these URLs.
Reviewed By: MaskRay, Quuxplusone, jhenderson, libunwind, libc++
Differential Revision: https://reviews.llvm.org/D116351
In D116472 we created conditionally defined variables for the tools to
unbreak the legacy build where they are in `llvm/tools`.
The runtimes are not tools, so that flexibility doesn't matter. Still,
it might be nice to define (unconditionally) and use the variable for
the runtimes simply to make the code a bit clearer and document what is
going on.
Also, consistently put project dirs at the beginning, not end of `CMAKE_MODULE_PATH`. This ensures they will properly shadow similarly named stuff that happens to be later on the path.
Reviewed By: mstorsjo, #libunwind, #libc, #libc_abi, ldionne
Differential Revision: https://reviews.llvm.org/D116477
This adds a CMake option (defaults to OFF to not be intrusive) to activate
2 new targets `install-unwind-headers` and `install-unwind-headers-stripped`.
So, for example:
cmake -S runtimes -B build -G Ninja \
-DLLVM_ENABLE_RUNTIMES='libunwind' \
-DLIBUNWIND_INSTALL_HEADERS=ON
And then, `ninja -C build install-unwind` would install headers in addition
to good ol' dylibs and archives, i.e., targets `install-unwind*` `DEPENDS`
on `install-unwind-headers*`. On the other hand,
`ninja -C build install-unwind-headers` gives you headers only.
Differential Revision: https://reviews.llvm.org/D115535
There's a lot of history behind this, so here's a summary:
1. I stopped forcing -fPIC when building the runtimes in 30f305efe2,
before the LLVM 9 release back in 2019.
2. Someone complained that libc++.a couldn't be used in shared libraries
built without -fPIC (http://llvm.org/PR43604) since the LLVM 9 release.
This had been caused by my removal of -fPIC when building libc++.a in (1).
3. I suggested two ways of fixing the issue, the first being to force
-fPIC back unconditionally (http://llvm.org/D104328), and the second
being to specify that option explicitly when building the LLVM release
(http://llvm.org/D104327). We converged on the first solution.
4. I landed D104328, which forced building the runtimes with -fPIC.
This was included in the LLVM 13.0 release.
5. People complained about that and requested that we be able to
customize this setting (basically we should have done the second
solution).
This patch makes it such that the LLVM release script will specifically
ask for building with -fPIC using CMAKE_POSITION_INDEPENDENT_CODE,
however by default the runtimes will not force that option onto users.
This patch has the unintended effect that Clang and the LLVM libraries
(not only the runtime ones like libc++) will also be built with -fPIC
in the release. It would be better if we could specify that -fPIC is to
be used only when building the runtimes, however this is left as a
future improvement. The release should probably be using a bootstrapping
build and passing those options to the stage that builds the runtimes
only, see https://reviews.llvm.org/D112748 for that change.
Differential Revision: https://reviews.llvm.org/D110261
This patch implements the following:
- Emit PACBTI-M build attributes in libunwind asm files
- Authenticate LR in DWARF32 using PACBTI
Use Armv8.1-M.Main PACBTI extension to authenticate the return address
(stored in the LR register) before moving it to the PC (IP) register.
The AUTG instruction is used with the candidate return address, the CFA,
and the authentication code that is retrieved from the saved
pseudo-register RA_AUTH_CODE.
- Authenticate LR in EHABI using PACBTI
Authenticate the contents of the LR register using Armv8.1-M.Main PACBTI
extension.
A new frame unwinding instruction is introduced (0xb4). This
instruction pops out of the stack the return address authentication
code, which is then used in conjunction with the SP and the next-to-be
instruction pointer to perform authentication.
This authentication code is popped into a new register,
UNW_ARM_PSEUDO_PAC, which is a pseudo-register.
This patch is part of a series that adds support for the PACBTI-M extension of
the Armv8.1-M architecture, as detailed here:
https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/armv8-1-m-pointer-authentication-and-branch-target-identification-extension
The PACBTI-M specification can be found in the Armv8-M Architecture Reference
Manual:
https://developer.arm.com/documentation/ddi0553/latest
The following people contributed to this patch:
- Momchil Velikov
- Victor Campos
- Ties Stuij
Reviewed By: #libunwind, danielkiss, mstorsjo
Differential Revision: https://reviews.llvm.org/D112430
It's possible for this test not to pass if the libc used does not provide
unwind info for raise. We can replace it with __builtin_cast, which can lead
to a SIGTRAP on x86_64 and a SIGILL on aarch64.
Using this alternative, a nop is needed before the __builtin_cast. This is
because libunwind incorrectly decrements pc, which can cause pc to jump into
the previous function and use the incorrect FDE.
Differential Revision: https://reviews.llvm.org/D114818
Daniel Kiss