Using an array instead of ArrayRef would allow type inference, but
(short of using C99) one would still need to write
typedef uint16_t VT[];
LE.write(VT{0x1234, 0x5678});
llvm-svn: 258535
Summary: Add SaturatingMultiplyAdd convenience function template since A + (X * Y) comes up frequently when doing weighted arithmetic.
Reviewers: davidxl, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15385
llvm-svn: 257532
...and mark it as merely an input_iterator rather than a forward_iterator,
since it is destructive. And then rewrite == to take advantage of that.
Patch by Alex Denisov!
llvm-svn: 256913
This is necessary to use them as part of pointer traits and is generally
useful. I've added unit test coverage to isolate and ensure this works
correctly.
I'll watch the build bots to try to see if any compilers can't tolerate
this bit of magic (and much credit goes to Richard Smith for coming up
with this magical production!) but give a shout if you see issues.
llvm-svn: 256553
Previously, the code enforced non-decreasing alignment of each trailing
type. However, it's easy enough to allow for realignment as needed, and
thus avoid the developer having to think about the possiblilities for
alignment requirements on all architectures.
(E.g. on Linux/x86, a struct with an int64 member is 4-byte aligned,
while on other 32-bit archs -- and even with other OSes on x86 -- it has
8-byte alignment. This sort of thing is irritating to have to manually
deal with.)
llvm-svn: 256533
Remove all checks that required main thread to run faster than tasks in
ThreadPool, and yields which are now unnecessary. This should fix some
bot failures.
llvm-svn: 256056
- Automatic alignment of the base type for the alignment requirements
of the trailing types.
- Support for an arbitrary numbers of trailing types, instead of only
1 or 2, by using a variadic template implementation.
Upcoming commits to clang will take advantage of both of these features.
Differential Revision: http://reviews.llvm.org/D12439
llvm-svn: 256054
The current BranchProbability::normalizeProbabilities() forbids known and
unknown probabilities to coexist in the list. This was once used to help
capture probability exceptions but has caused some reported build
failures (https://llvm.org/bugs/show_bug.cgi?id=25838).
This patch removes this restriction by evenly distributing the complement
of the sum of all known probabilities to unknown ones. We could still
treat this as an abnormal behavior, but it is better to emit warnings in
our future profile validator.
Differential revision: http://reviews.llvm.org/D15548
llvm-svn: 255934
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
This is a recommit of r255444 ; trying to workaround a bug in the
MSVC 2013 standard library. I think I was hit by:
http://connect.microsoft.com/VisualStudio/feedbackdetail/view/791185/std-packaged-task-t-where-t-is-void-or-a-reference-class-are-not-movable
Recommit of r255589, trying to please g++ as well.
Differential Revision: http://reviews.llvm.org/D15464
From: mehdi_amini <mehdi_amini@91177308-0d34-0410-b5e6-96231b3b80d8>
llvm-svn: 255593
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
This is a recommit of r255444 ; trying to workaround a bug in the
MSVC 2013 standard library. I think I was hit by:
http://connect.microsoft.com/VisualStudio/feedbackdetail/view/791185/std-packaged-task-t-where-t-is-void-or-a-reference-class-are-not-movable
Differential Revision: http://reviews.llvm.org/D15464
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255589
This is a very simple implementation of a thread pool using C++11
thread. It accepts any std::function<void()> for asynchronous
execution. Individual task can be synchronize using the returned
future, or the client can block on the full queue completion.
In case LLVM is configured with Threading disabled, it falls back
to sequential execution using std::async with launch:deferred.
This is intended to support parallelism for ThinLTO processing in
linker plugin, but is generic enough for any other uses.
Differential Revision: http://reviews.llvm.org/D15464
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255444
Summary:
Improve SaturatingAdd()/SaturatingMultiply() to use bool * to optionally return overflow result.
This should make it clearer that the value is returned at callsites and reduces the size of the implementation.
Reviewers: davidxl, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15219
llvm-svn: 255128
Summary: Adds the ability for callers to detect when saturation occurred on the result of saturating addition/multiplication.
Reviewers: davidxl, silvas, rsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14931
llvm-svn: 253921
Summary:
This change fixes the SaturatingMultiply<T>() function template to not cause undefined behavior with T=uint16_t.
Thanks to Richard Smith's contribution, it also no longer requires an integer division.
Patch by Richard Smith.
Reviewers: silvas, davidxl
Subscribers: rsmith, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14845
llvm-svn: 253870
It caused link errors of the form:
InstrProfiling.c:(.text.__llvm_profile_instrument_target+0x1c0): undefined reference to `__sync_fetch_and_add_8'
We had a network outage at the time of the commit so the first build to show a
problem is http://lab.llvm.org:8011/builders/clang-cmake-mips/builds/10827
llvm-svn: 253656
Ubsan detected undefined behavior in the MathExtras SaturatingMultiply test.
This change disables the test while it is being investigated.
llvm-svn: 253539
Summary:
This change adds MathExtras helper functions for handling unsigned, saturating addition and multiplication. It also updates the instrumentation and sample profile merge implementations to use them.
Reviewers: dnovillo, bogner, davidxl
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14720
llvm-svn: 253497
Summary:
This change adds MathExtras helper functions for handling unsigned, saturating addition and multiplication. It also updates the instrumentation and sample profile merge implementations to use them.
No functional changes.
Reviewers: dnovillo, bogner, davidxl
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14720
llvm-svn: 253412
Summary:
This patch changes the behavior of path::system_temp_directory() on Windows to be closer to GetTempPath Windows API call. Enforces path separator to be the native one, makes path absolute, etc. GetTempPath is not used directly because of limitations/implementation bugs on Windows 7.
Windows specific unit tests are added. Most of them runs in separated process with modified environment variables.
This change fixes FileSystemTest.CreateDir unittest that had been failing when run from Unix-like shell on Windows (Unix-like path separator (/) used in env variables).
Reviewers: chapuni, rafael, aaron.ballman
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D14231
llvm-svn: 253345
Summary:
In general GetTempDir follows the same logic as the replaced code: checks env variables TMP, TEMP, USERPROFILE in order. However, it also perform other checks like making separators native (\), making the path absolute, etc.
This change fixes FileSystemTest.CreateDir unittest that had been failing when run from Unix-like shell on Windows (Unix-like path separator (/) used in env variables).
Reviewers: chapuni, rafael, aaron.ballman
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D14231
llvm-svn: 252366
Summary: On Windows we have to take UTF16 encoded env vars and convert them to UTF8. This patch fixes CopyEnvironment helper function used by process unit tests.
Reviewers: yaron.keren
Subscribers: yaron.keren, llvm-commits
Differential Revision: http://reviews.llvm.org/D14278
llvm-svn: 252039
Summary:
The new function sys::path::user_cache_directory tries to discover
a directory suitable for cache storage for current system user.
On Windows and Darwin it returns a path to system-specific user cache directory.
On Linux it follows XDG Base Directory Specification, what is:
- use non-empty $XDG_CACHE_HOME env var,
- use $HOME/.cache.
Reviewers: chapuni, aaron.ballman, rafael
Subscribers: rafael, aaron.ballman, llvm-commits
Differential Revision: http://reviews.llvm.org/D13801
llvm-svn: 251784
Summary: This patch replaces usage of deprecated SHGetFolderPathW with SHGetKnownFolderPath. The usage of SHGetKnownFolderPath is wrapped to allow queries for other "known" folders in the near future.
Reviewers: aaron.ballman, gbedwell
Subscribers: chapuni, llvm-commits
Differential Revision: http://reviews.llvm.org/D13753
llvm-svn: 250501
With r250345 and r250343, we start to observe the following failure
when bootstrap clang with lto and pgo:
PHI node entries do not match predecessors!
%.sroa.029.3.i = phi %"class.llvm::SDNode.13298"* [ null, %30953 ], [ null, %31017 ], [ null, %30998 ], [ null, %_ZN4llvm8dyn_castINS_14ConstantSDNodeENS_7SDValueEEENS_10cast_rettyIT_T0_E8ret_typeERS5_.exit.i.1804 ], [ null, %30975 ], [ null, %30991 ], [ null, %_ZNK4llvm3EVT13getScalarTypeEv.exit.i.1812 ], [ %..sroa.029.0.i, %_ZN4llvm11SmallVectorIiLj8EED1Ev.exit.i.1826 ], !dbg !451895
label %30998
label %_ZNK4llvm3EVTeqES0_.exit19.thread.i
LLVM ERROR: Broken function found, compilation aborted!
I will re-commit this if the bot does not recover.
llvm-svn: 250366
Currently in JumpThreading pass, the branch weight metadata is not updated after CFG modification. Consider the jump threading on PredBB, BB, and SuccBB. After jump threading, the weight on BB->SuccBB should be adjusted as some of it is contributed by the edge PredBB->BB, which doesn't exist anymore. This patch tries to update the edge weight in metadata on BB->SuccBB by scaling it by 1 - Freq(PredBB->BB) / Freq(BB->SuccBB).
This is the third attempt to submit this patch, while the first two led to failures in some FDO tests. After investigation, it is the edge weight normalization that caused those failures. In this patch the edge weight normalization is fixed so that there is no zero weight in the output and the sum of all weights can fit in 32-bit integer. Several unit tests are added.
Differential revision: http://reviews.llvm.org/D10979
llvm-svn: 250345
On Windows, fs::rename() could fail is another process was reading the
file at the same time using fs::openFileForRead(). In most cases the user
wouldn't notice as fs::rename() will continue to retry for 2000ms. Typically
this is enough for the read to complete and a retry to succeed, but if the
disk is being it too hard then the response time might be longer than the
retry time and the rename would fail with a permission error.
Add FILE_SHARE_DELETE to the sharing flags for CreateFileW() in
fs::openFileForRead() and try ReplaceFileW() prior to MoveFileExW()
in fs::rename().
Based on an initial patch by Edd Dawson!
Differential Revision: http://reviews.llvm.org/D13647
llvm-svn: 250046
Summary:
As per Duncan's review for D12536, I extracted the sub-byte bit aligned
reading and writing code into lib/Support, and generalized it. Added calls from
BackpatchWord. Also added unittests.
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13189
llvm-svn: 248897
HHVM calling convention, hhvmcc, is used by HHVM JIT for
functions in translated cache. We currently support LLVM back end to
generate code for X86-64 and may support other architectures in the
future.
In HHVM calling convention any GP register could be used to pass and
return values, with the exception of R12 which is reserved for
thread-local area and is callee-saved. Other than R12, we always
pass RBX and RBP as args, which are our virtual machine's stack pointer
and frame pointer respectively.
When we enter translation cache via hhvmcc function, we expect
the stack to be aligned at 16 bytes, i.e. skewed by 8 bytes as opposed
to standard ABI alignment. This affects stack object alignment and stack
adjustments for function calls.
One extra calling convention, hhvm_ccc, is used to call C++ helpers from
HHVM's translation cache. It is almost identical to standard C calling
convention with an exception of first argument which is passed in RBP
(before we use RDI, RSI, etc.)
Differential Revision: http://reviews.llvm.org/D12681
llvm-svn: 248832
BranchProbability now is represented by its numerator and denominator in uint32_t type. This patch changes this representation into a fixed point that is represented by the numerator in uint32_t type and a constant denominator 1<<31. This is quite similar to the representation of BlockMass in BlockFrequencyInfoImpl.h. There are several pros and cons of this change:
Pros:
1. It uses only a half space of the current one.
2. Some operations are much faster like plus, subtraction, comparison, and scaling by an integer.
Cons:
1. Constructing a probability using arbitrary numerator and denominator needs additional calculations.
2. It is a little less precise than before as we use a fixed denominator. For example, 1 - 1/3 may not be exactly identical to 1 / 3 (this will lead to many BranchProbability unit test failures). This should not matter when we only use it for branch probability. If we use it like a rational value for some precise calculations we may need another construct like ValueRatio.
One important reason for this change is that we propose to store branch probabilities instead of edge weights in MachineBasicBlock. We also want clients to use probability instead of weight when adding successors to a MBB. The current BranchProbability has more space which may be a concern.
Differential revision: http://reviews.llvm.org/D12603
llvm-svn: 248633
'llvm::TrailingObjects<`anonymous-namespace'::Class1,short,llvm::NoTrailingTypeArg>::additionalSizeToAlloc' :
cannot access protected member declared in class
'llvm::TrailingObjects<`anonymous-namespace'::Class1,short,llvm::NoTrailingTypeArg>'
I'm not sure how this compiles with gcc.
Aren't protecteded members accessible only with protected or public inheritance?
llvm-svn: 244199
This is intended to help support the idiom of a class that has some
other objects (or multiple arrays of different types of objects)
appended on the end, which is used quite heavily in clang.
Differential Revision: http://reviews.llvm.org/D11272
llvm-svn: 244164
This commit ensures that a value that's passed into YAML's IO mapOptional method
is going to be assigned a value returned by the default constructor for that
value's type when the appropriate key is not present in the YAML mapping.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10492
llvm-svn: 239972
As noted on Errc.h:
// * std::errc is just marked with is_error_condition_enum. This means that
// common patters like AnErrorCode == errc::no_such_file_or_directory take
// 4 virtual calls instead of two comparisons.
And on some libstdc++ those virtual functions conclude that
------------------------
int main() {
std::error_code foo = std::make_error_code(std::errc::no_such_file_or_directory);
return foo == std::errc::no_such_file_or_directory;
}
-------------------------
should exit with 0.
llvm-svn: 239683
StringSaver now always saves to a BumpPtrAllocator.
The only reason for having the virtual saveImpl is so lld can have a
thread safe version.
The reason for the distinct BumpPtrStringSaver class is to avoid the
virtual destructor.
llvm-svn: 239669
Summary:
We would wrap flow mappings and sequences when they go over a hardcoded 70
characters limit. Make the wrapping column configurable (and default to 70
co the change should be NFC for current users). Passing 0 allows to completely
suppress the wrapping which makes it easier to handle in tools like FileCheck.
Reviewers: bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10109
llvm-svn: 238584
The commit null terminates the string value in the `yaml::BlockScalarNode`
class.
This change is motivated by the initial MIR serialization commit (r237708)
that I reverted in r237730 because the LLVM IR source from the block
scalar node wasn't terminated by a null character and thus the buildbots
failed on one testcase sometimes. This change enables me to recommit
the reverted commit.
llvm-svn: 237942
The existing code for method StreamingMemoryObject.fetchToPos does not respect
the corresonding call to setKnownObjectSize(). As a result, it allows the
StreamingMemoryObject to read bytes past the object size.
This patch provides a test case, and code to fix the problem.
Patch by Karl Schimpf
Differential Revision: http://reviews.llvm.org/D8931
llvm-svn: 237939
This commit gives the users of the YAML Traits I/O library
the ability to serialize scalars using the YAML literal block
scalar notation by allowing them to implement a specialization
of the `BlockScalarTraits` struct for their custom types.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9613
llvm-svn: 237404
This commit implements the parsing of YAML block scalars.
Some code existed for it before, but it couldn't parse block
scalars.
This commit adds a new yaml node type to represent the block
scalar values.
This commit also deletes the 'spec-09-27' and 'spec-09-28' tests
as they are identical to the test file 'spec-09-26'.
This commit introduces 3 new utility functions to the YAML scanner
class: `skip_s_space`, `advanceWhile` and `consumeLineBreakIfPresent`.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9503
llvm-svn: 237314
The TargetRegistry is just a namespace-like class, instantiated in one
place to use a range-based for loop. Instead, expose access to the
registry via a range-based 'targets()' function instead. This makes most
uses a bit awkward/more verbose - but eventually we should just add a
range-based find_if function which will streamline these functions. I'm
happy to mkae them a bit awkward in the interim as encouragement to
improve the algorithms in time.
llvm-svn: 237059
This commit changes the 'skip' method in the 'KeyValueNode' class
to ensure that it doesn't dereference a null pointer when calling
the 'skip' method of its value child node. It also adds a unittest
that ensures that the crash doesn't occur.
This change is motivated by a patch that implements parsing
of YAML block scalars (http://reviews.llvm.org/D9503), as one
of the unittests in that patch triggered this problem.
llvm-svn: 236669
This patch adds an optional 'flow' field to the MappingTrait
class so that yaml IO will be able to output flow mappings.
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9450
llvm-svn: 236456
This patch fixes a bug where the YAML Output class emitted
a sequence of flow sequences without the '-' characters.
Before:
seq:
[ a, b ]
[ c, d ]
After:
seq:
- [ a, b ]
- [ c, d ]
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9206
llvm-svn: 236329
Patch from dexonsmith. The call to toInt() was calling compareTo() which
in some cases would call back to toInt(), creating an infinite loop.
Fixed by simplifying the logic in compareTo() to avoid the co-recursion.
llvm-svn: 236326
Summary:
The private constructor for ScaledNumber was using uint64_t instead of
DigitsT. This was preventing instantiations of ScaledNumber with
anything other than uint64_t types.
In implementing the tests, I ran into another issue. Operators >>= and
<<= did not have variants for accepting other ScaledNumber as the shift
argument. This is expected by the SCALED_NUMBER_BOP.
It makes no sense to allow shifting a ScaledNumber by another
ScaledNumber, so the patch includes two new templates for shifting
ScaledNumbers.
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9350
llvm-svn: 236232
Rafael Espindola