* adds -aux-triple option to specify target triple
* propagates aux target info to AST context and Preprocessor
* pulls in target specific preprocessor macros.
* pulls in target-specific builtins from aux target.
* sets appropriate host or device attribute on builtins.
Differential Revision: http://reviews.llvm.org/D12917
llvm-svn: 248299
So, iterate over the list of macros mentioned in modules, and make sure those
are in the master table.
This isn't particularly efficient, but hopefully it's something that isn't
done too often.
PR23929 and rdar://problem/21480635
llvm-svn: 240571
visibility is enabled) or leave and re-enter it, restore the macro and module
visibility state from last time we were in that submodule.
This allows mutually-#including header files to stand a chance at being
modularized with local visibility enabled.
llvm-svn: 237871
This, in preparation for the introduction of more new keywords in the
implementation of the C++ language, generalizes the support for future keyword
compat diagnostics (e.g., diag::warn_cxx11_keyword) by extending the
applicability of the relevant property in IdentifierTable with appropriate
renaming.
Patch by Hubert Tong!
llvm-svn: 237332
It has no place there; it's not a property of the Module, and it makes
restoring the visibility set when we leave a submodule more difficult.
llvm-svn: 236300
Modules builds fundamentally have a non-linear macro history. In the interest
of better source fidelity, represent the macro definition information
faithfully: we have a linear macro directive history within each module, and at
any point we have a unique "latest" local macro directive and a collection of
visible imported directives. This also removes the attendent complexity of
attempting to create a correct MacroDirective history (which we got wrong
in the general case).
No functionality change intended.
llvm-svn: 236176
the active module macros at the point of definition, rather than reconstructing
it from the macro history. No functionality change intended.
llvm-svn: 235941
Previously we'd defer this determination until writing the AST, which doesn't
allow us to use this information when building other submodules of the same
module. This change also allows us to use a uniform mechanism for writing
module macro records, independent of whether they are local or imported.
llvm-svn: 235614
in debugger mode) to accept @import declarations
and pass them to the debugger.
In the preprocessor, accept import declarations
if the debugger is enabled, but don't actually
load the module, just pass the import path on to
the preprocessor callbacks.
In the Objective-C parser, if it sees an import
declaration in statement context (usual for LLDB),
ignore it and return a NullStmt.
llvm-svn: 223855
rather than trying to extract this information from the FileEntry after the
fact.
This has a number of beneficial effects. For instance, diagnostic messages for
failed module builds give a path relative to the "module root" rather than an
absolute file path, and the contents of the module includes file is no longer
dependent on what files the including TU happened to inspect prior to
triggering the module build.
llvm-svn: 223095
Only those callers who are dynamically passing ownership should need the
3 argument form. Those accepting the default ("do pass ownership")
should do so explicitly with a unique_ptr now.
llvm-svn: 216614
Currently the analyzer lazily models some functions using 'BodyFarm',
which constructs a fake function implementation that the analyzer
can simulate that approximates the semantics of the function when
it is called. BodyFarm does this by constructing the AST for
such definitions on-the-fly. One strength of BodyFarm
is that all symbols and types referenced by synthesized function
bodies are contextual adapted to the containing translation unit.
The downside is that these ASTs are hardcoded in Clang's own
source code.
A more scalable model is to allow these models to be defined as source
code in separate "model" files and have the analyzer use those
definitions lazily when a function body is needed. Among other things,
it will allow more customization of the analyzer for specific APIs
and platforms.
This patch provides the initial infrastructure for this feature.
It extends BodyFarm to use an abstract API 'CodeInjector' that can be
used to synthesize function bodies. That 'CodeInjector' is
implemented using a new 'ModelInjector' in libFrontend, which lazily
parses a model file and injects the ASTs into the current translation
unit.
Models are currently found by specifying a 'model-path' as an
analyzer option; if no path is specified the CodeInjector is not
used, thus defaulting to the current behavior in the analyzer.
Models currently contain a single function definition, and can
be found by finding the file <function name>.model. This is an
initial starting point for something more rich, but it bootstraps
this feature for future evolution.
This patch was contributed by Gábor Horváth as part of his
Google Summer of Code project.
Some notes:
- This introduces the notion of a "model file" into
FrontendAction and the Preprocessor. This nomenclature
is specific to the static analyzer, but possibly could be
generalized. Essentially these are sources pulled in
exogenously from the principal translation.
Preprocessor gets a 'InitializeForModelFile' and
'FinalizeForModelFile' which could possibly be hoisted out
of Preprocessor if Preprocessor exposed a new API to
change the PragmaHandlers and some other internal pieces. This
can be revisited.
FrontendAction gets a 'isModelParsingAction()' predicate function
used to allow a new FrontendAction to recycle the Preprocessor
and ASTContext. This name could probably be made something
more general (i.e., not tied to 'model files') at the expense
of losing the intent of why it exists. This can be revisited.
- This is a moderate sized patch; it has gone through some amount of
offline code review. Most of the changes to the non-analyzer
parts are fairly small, and would make little sense without
the analyzer changes.
- Most of the analyzer changes are plumbing, with the interesting
behavior being introduced by ModelInjector.cpp and
ModelConsumer.cpp.
- The new functionality introduced by this change is off-by-default.
It requires an analyzer config option to enable.
llvm-svn: 216550
And in the process, discover that FileManager::removeStatCache had a
double-delete when removing an element from the middle of the list (at
the beginning or the end of the list, there was no problem) and add a
unit test to exercise the code path (which successfully crashed when run
(with modifications to match the old API) without this patch applied)
llvm-svn: 215388
Remove pointless MICache: it only ever contained up to 1 object, and was only
non-empty when recovering from an error. There's no performance or memory win
from maintaining this cache.
llvm-svn: 213825
MacroArgs are owned by TokenLexer, and when a TokenLexer is destroyed, it'll
call its MacroArgs's destroy() method. destroy() only appends the MacroArg to
Preprocessor's MacroArgCache list, and Preprocessor's destructor then calls
deallocate() on all MacroArgs in that list. This method then ends up freeing
the MacroArgs's memory.
In a code completion context, Parser::cutOffParsing() gets called when a code
completion token is hit, which changes the type of the current token to
tok::eof. eof tokens aren't always ConsumeToken()ed, so
Preprocessor::HandleEndOfFile() isn't always called, and that function is
responsible for popping the macro stack.
Due to this, Preprocessor::CurTokenLexer can be non-NULL when
~Preprocessor runs. It's a unique_ptr, so it ended up being destructed after
~Preprocessor completed, and its MacroArgs thus got added to the freelist after
the code freeing things on the freelist had already completed. The fix is to
explicitly call reset() before the freelist processing happens. (See the bug
for more notes.)
llvm-svn: 208438
The Preprocessor::Initialize() function already offers a clear interface to
achieve this, further reducing the confusing number of states a newly
constructed preprocessor can have.
llvm-svn: 207825
These features are new in VS 2013 and are necessary in order to layout
std::ostream correctly. Currently we have an ABI incompatibility when
self-hosting with the 2013 stdlib in our convertible_fwd_ostream wrapper
in gtest.
This change adds another implicit attribute, MSVtorDispAttr, because
implicit attributes are currently the best way to make sure the
information stays on class templates through instantiation.
Reviewers: majnemer
Differential Revision: http://llvm-reviews.chandlerc.com/D2746
llvm-svn: 201274
encodes the canonical rules for LLVM's style. I noticed this had drifted
quite a bit when cleaning up LLVM, so wanted to clean up Clang as well.
llvm-svn: 198686
module. Use the marker to diagnose cases where we try to transition between
submodules when not at the top level (most likely because a closing brace was
missing at the end of a header file, but is also possible if submodule headers
attempt to do something fundamentally non-modular, like our .def files).
llvm-svn: 195543
The preprocessor currently recognizes module declarations to load a
module based on seeing the 'import' keyword followed by an
identifier. This sequence is fairly unlikely in C (one would need a
type named 'import'), but is more common in Objective-C (where a
variable named 'import' can cause problems). Since import declarations
currently require a leading '@', recognize that in the preprocessor as
well. Fixes <rdar://problem/15084587>.
llvm-svn: 194225
Yaron Keren