functions. Set AddedComplexity to determine the order in which patterns are
matched.
This simplifies selection of floating point loads/stores.
No functionality change intended.
llvm-svn: 175300
of the old jit and which we don't intend to support in mips16 or micromips.
This dependency is for the testing of whether an instruction is a pseudo.
llvm-svn: 175297
not matter but makes it more gcc compatible which avoids possible subtle
problems. Also, turned back on a disabled check in helloworld.ll.
llvm-svn: 175237
1. Define and use function terminateSearch.
2. Use MachineBasicBlock::iterator instead of MachineBasicBlock::instr_iterator.
3. Delete the line which checks whether an instruction is a pseudo.
llvm-svn: 175219
up so that we can apply the direct object emitter patch. This patch
should be a nop right now and it's test is to not break what is already
there.
llvm-svn: 175126
if the offset fits in 11 bits. This makes use of the fact that the abi
requires sp to be 8 byte aligned so the actual offset can fit in 8
bits. It will be shifted left and sign extended before being actually used.
The assembler or direct object emitter will shift right the 11 bit
signed field by 3 bits. We don't need to deal with that here.
llvm-svn: 175073
MipsCodeEmitter.cpp.
JALR and NOP are expanded by function emitPseudoExpansionLowering, which is not
called when the old JIT is used.
This fixes the following tests which have been failing on
llvm-mips-linux builder:
LLVM :: ExecutionEngine__2003-01-04-LoopTest.ll
LLVM :: ExecutionEngine__2003-05-06-LivenessClobber.ll
LLVM :: ExecutionEngine__2003-06-04-bzip2-bug.ll
LLVM :: ExecutionEngine__2005-12-02-TailCallBug.ll
LLVM :: ExecutionEngine__2003-10-18-PHINode-ConstantExpr-CondCode-Failure.ll
LLVM :: ExecutionEngine__hello2.ll
LLVM :: ExecutionEngine__stubs.ll
LLVM :: ExecutionEngine__test-branch.ll
LLVM :: ExecutionEngine__test-call.ll
LLVM :: ExecutionEngine__test-common-symbols.ll
LLVM :: ExecutionEngine__test-loadstore.ll
LLVM :: ExecutionEngine__test-loop.ll
llvm-svn: 174912
same so we put in the comment field an indicator when we think we are
emitting the 16 bit version. For the direct object emitter, the difference is
important as well as for other passes which need an accurate count of
program size. There will be other similar putbacks to this for various
instructions.
llvm-svn: 174747
allowed size for the instruction. This code uses RegScavenger to fix this.
We sometimes need 2 registers for Mips16 so we must handle things
differently than how register scavenger is normally used.
llvm-svn: 174696
is a vararg function.
The original code was examining flag OutputArg::IsFixed to determine whether
CC_MipsN_VarArg or CC_MipsN should be called. This is not correct, since this
flag is often set to false when the function being analyzed is a non-variadic
function.
llvm-svn: 174442
and enables the instruction printer to print aliased
instructions.
Due to usage of RegisterOperands a change in common
code (utils/TableGen/AsmWriterEmitter.cpp) is required
to get the correct register value if it is a RegisterOperand.
Contributer: Vladimir Medic
llvm-svn: 174358
and update ELF header e_flags.
Currently gathering information such as symbol,
section and data is done by collecting it in an
MCAssembler object. From MCAssembler and MCAsmLayout
objects ELFObjectWriter::WriteObject() forms and
streams out the ELF object file.
This patch just adds a few members to the MCAssember
class to store and access the e_flag settings. It
allows for runtime additions to the e_flag by
assembler directives. The standalone assembler can
get to MCAssembler from getParser().getStreamer().getAssembler().
This patch is the generic infrastructure and will be
followed by patches for ARM and Mips for their target
specific use.
Contributer: Jack Carter
llvm-svn: 173882
conditions are met:
1. They share the same operand and are in the same BB.
2. Both outputs are used.
3. The target has a native instruction that maps to ISD::FSINCOS node or
the target provides a sincos library call.
Implemented the generic optimization in sdisel and enabled it for
Mac OSX. Also added an additional optimization for x86_64 Mac OSX by
using an alternative entry point __sincos_stret which returns the two
results in xmm0 / xmm1.
rdar://13087969
PR13204
llvm-svn: 173755
Allow Mips16 routines to call Mips32 routines that have abi requirements
that either arguments or return values are passed in floating point
registers. This handles only the pic case. We have not done non pic
for Mips16 yet in any form.
The libm functions are Mips32, so with this addition we have a complete
Mips16 hard float implementation.
We still are not able to complete mix Mip16 and Mips32 with hard float.
That will be the next phase which will have several steps. For Mips32
to freely call Mips16 some stub functions must be created.
llvm-svn: 173320
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
Formatting fixes. Mostly long lines and
blank spaces at end of lines.
Contributer: Jack Carter
llvm-svn: 172882
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
Support for Mips register information sections.
Mips ELF object files have a section that is dedicated
to register use info. Some of this information such as
the assumed Global Pointer value is used by the linker
in relocation resolution.
The register info file is .reginfo in o32 and .MIPS.options
in 64 and n32 abi files.
This patch contains the changes needed to create the sections,
but leaves the actual register accounting for a future patch.
Contributer: Jack Carter
llvm-svn: 172847
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
Removal of redundant code and formatting fixes.
Contributers: Jack Carter/Vladimir Medic
llvm-svn: 172842
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
The Mips RDHWR (Read Hardware Register) instruction was not
tested for assembler or dissassembler consumption. This patch
adds that functionality.
Contributer: Vladimir Medic
llvm-svn: 172685
Hope you are feeling better.
The Mips RDHWR (Read Hardware Register) instruction was not
tested for assembler or dissassembler consumption. This patch
adds that functionality.
Contributer: Vladimir Medic
llvm-svn: 172579
we need to generate a N64 compound relocation
R_MIPS_GPREL_32/R_MIPS_64/R_MIPS_NONE.
The bug was exposed by the SingleSourcetest case
DuffsDevice.c.
Contributer: Jack Carter
llvm-svn: 172496
register names in the standalone assembler llvm-mc.
Registers such as $A1 can represent either a 32 or
64 bit register based on the instruction using it.
In addition, based on the abi, $T0 can represent different
32 bit registers.
The problem is resolved by the Mips specific AsmParser
td definitions changing to work together. Many cases of
RegisterClass parameters are now RegisterOperand.
Contributer: Vladimir Medic
llvm-svn: 172284
value in the 64 bit .eh_frame section.
It doesn't however allow exception handling to work
yet since it depends on the correct relocation model
being set in the ELF header flags.
Contributer: Jack Carter
llvm-svn: 171881
This is necessary not only for representing empty ranges, but for handling
multibyte characters in the input. (If the end pointer in a range refers to
a multibyte character, should it point to the beginning or the end of the
character in a char array?) Some of the code in the asm parsers was already
assuming this anyway.
llvm-svn: 171765
a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.
The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.
The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.
The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.
The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.
The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.
The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.
The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.
Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.
Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.
Commits to update DragonEgg and Clang will be made presently.
llvm-svn: 171681
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
llvm-svn: 171366
utils/sort_includes.py script.
Most of these are updating the new R600 target and fixing up a few
regressions that have creeped in since the last time I sorted the
includes.
llvm-svn: 171362
next few days but it's already tested a lot from test-suite and works fine.
This patch completes almost 100% pass of test-suite for mips 16.
llvm-svn: 170674
these patches are tested a lot by test-suite but
make check tests are forthcoming once the next
few patches that complete this are committed.
with the next few patches the pass rate for mips16 is
near 100%
llvm-svn: 170656
Akira Hatanaka