The bug arises during register allocation on i686 for
CMPXCHG8B instruction when base pointer is needed. CMPXCHG8B
needs 4 implicit registers (EAX, EBX, ECX, EDX) and a memory address,
plus ESI is reserved as the base pointer. With such constraints the only
way register allocator would do its job successfully is when the addressing
mode of the instruction requires only one register. If that is not the case
- we are emitting additional LEA instruction to compute the address.
It fixes PR28755.
Patch by Alexander Ivchenko <alexander.ivchenko@intel.com>
Differential Revision: https://reviews.llvm.org/D25088
llvm-svn: 287875
Move the definitions of three variables out of the switch.
Patch by Alexander Ivchenko <alexander.ivchenko@intel.com>
Differential Revision: https://reviews.llvm.org/D25192
llvm-svn: 287874
- It does not modify the input instruction
- Second operand of any address is always an Index Register,
make sure we actually check for that, instead of a check for
an immediate value
Patch by Alexander Ivchenko <alexander.ivchenko@intel.com>
Differential Revision: https://reviews.llvm.org/D24938
llvm-svn: 287873
Replace the CVTTPD2DQ/CVTTPD2UDQ and CVTDQ2PD/CVTUDQ2PD opcodes with general versions.
This is an initial step towards similar FP_TO_SINT/FP_TO_UINT and SINT_TO_FP/UINT_TO_FP lowering to AVX512 CVTTPS2QQ/CVTTPS2UQQ and CVTQQ2PS/CVTUQQ2PS with illegal types.
Differential Revision: https://reviews.llvm.org/D27072
llvm-svn: 287870
Change the IRObjectFile symbol iterator to be a pointer into a vector of
PointerUnions representing either IR symbols or asm symbols.
This change is in preparation for a future change for supporting multiple
modules in an IRObjectFile. Although it causes an increase in memory
consumption, we can deal with that issue separately by introducing a bitcode
symbol table.
Differential Revision: https://reviews.llvm.org/D26928
llvm-svn: 287845
The scavenger was not passed if requiresFrameIndexScavenging was
enabled. I need to be able to test for the availability of an
unallocatable register here, so I can't create a virtual register for
it.
It might be better to just always use the scavenger and stop
creating virtual registers.
llvm-svn: 287843
m0 may need to be written for spill code, so
we don't want general code uses relying on the
value stored in it.
This introduces a few code quality regressions where copies
from m0 are not coalesced into copies of a copy of m0.
llvm-svn: 287841
This patch makes AsmPrinter less reliant on DwarfDebug by relying on the DWARF version in the AsmPrinter's MCStreamer's MCContext. This allows us to remove the redundant DWARF version from DwarfDebug. It also lets us change code that used to access the AsmPrinter's DwarfDebug just to get to the DWARF version by changing the DWARF version accessor on AsmPrinter so that it grabs the version from its MCStreamer's MCContext.
Differential Revision: https://reviews.llvm.org/D27032
llvm-svn: 287839
The size and offset were wrong. The size of the object was
being used for the size of the access, when here it is really
being split into 4-byte accesses. The underlying object size
is set in the MachinePointerInfo, which also didn't have the
offset set.
llvm-svn: 287806
This reverts commit r287403. It breaks an internal asan bot. According
to Kuba, a fix is up for review here: https://reviews.llvm.org/D26929
llvm-svn: 287804
This patch fixes a small bug where symbols defined in the INIT
and FINI sections were incorrectly getting a type of 'n'.
Differential Revision: https://reviews.llvm.org/D26937
llvm-svn: 287803
Undefined and weak symbols don't have a meaningful size or value.
As such, nothing should be printed for those attributes (this is
already done for the address with 'U') with the BSD format. This
matches what GNU nm does.
Note that for the POSIX.2 format [1] zero values are still
printed for the size and value. This seems in spirit with
the format strings in that specification, but is debatable.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/
Differential Revision: https://reviews.llvm.org/D26936
llvm-svn: 287802
This reverts commit r287684
Objections on the review thread had not been addressed to
prior to commit. I asked the committer to revert, but i expect they
are gone for the US holiday or something.
llvm-svn: 287798
We did not support subregs in InlineSpiller:foldMemoryOperand() because targets
may not deal with them correctly.
This adds a target hook to let the spiller know that a target can handle
subregs, and actually enables it for x86 for the case of stack slot reloads.
This fixes PR30832.
Differential Revision: https://reviews.llvm.org/D26521
llvm-svn: 287792
-symbols prints both .symtab and .dynsym symbols for GNU style in ELF.
-dyn-symbols prints symbols looking up through hash tables. This helps validate hash tables.
llvm-svn: 287786
analyses to have a common type which is enforced rather than using
a char object and a `void *` type when used as an identifier.
This has a number of advantages. First, it at least helps some of the
confusion raised in Justin Lebar's code review of why `void *` was being
used everywhere by having a stronger type that connects to documentation
about this.
However, perhaps more importantly, it addresses a serious issue where
the alignment of these pointer-like identifiers was unknown. This made
it hard to use them in pointer-like data structures. We were already
dodging this in dangerous ways to create the "all analyses" entry. In
a subsequent patch I attempted to use these with TinyPtrVector and
things fell apart in a very bad way.
And it isn't just a compile time or type system issue. Worse than that,
the actual alignment of these pointer-like opaque identifiers wasn't
guaranteed to be a useful alignment as they were just characters.
This change introduces a type to use as the "key" object whose address
forms the opaque identifier. This both forces the objects to have proper
alignment, and provides type checking that we get it right everywhere.
It also makes the types somewhat less mysterious than `void *`.
We could go one step further and introduce a truly opaque pointer-like
type to return from the `ID()` static function rather than returning
`AnalysisKey *`, but that didn't seem to be a clear win so this is just
the initial change to get to a reliably typed and aligned object serving
is a key for all the analyses.
Thanks to Richard Smith and Justin Lebar for helping pick plausible
names and avoid making this refactoring many times. =] And thanks to
Sean for the super fast review!
While here, I've tried to move away from the "PassID" nomenclature
entirely as it wasn't really helping and is overloaded with old pass
manager constructs. Now we have IDs for analyses, and key objects whose
address can be used as IDs. Where possible and clear I've shortened this
to just "ID". In a few places I kept "AnalysisID" to make it clear what
was being identified.
Differential Revision: https://reviews.llvm.org/D27031
llvm-svn: 287783
Summary:
The "getVectorizablePrefix" method would give up if it found an aliasing load for a store chain.
In practice, the aliasing load can be treated as a memory barrier and all stores that precede it
are a valid vectorizable prefix.
Issue found by volkan in D26962. Testcase is a pruned version of the one in the original patch.
Reviewers: jlebar, arsenm, tstellarAMD
Subscribers: mzolotukhin, wdng, nhaehnle, anna, volkan, llvm-commits
Differential Revision: https://reviews.llvm.org/D27008
llvm-svn: 287781
Forward store values to matching loads down through token
factors. Factored from D14834.
Reviewers: jyknight, hfinkel
Subscribers: hfinkel, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D26080
llvm-svn: 287773
We have the following DAGCombiner transformations:
(mul (shl X, c1), c2) -> (mul X, c2 << c1)
(mul (shl X, C), Y) -> (shl (mul X, Y), C)
(shl (mul x, c1), c2) -> (mul x, c1 << c2)
Usually the constant shift is optimised by SelectionDAG::getNode when it is
constructed, by SelectionDAG::FoldConstantArithmetic, but when we're dealing
with vectors and one of those vector constants contains an undef element
FoldConstantArithmetic does not fold and we enter an infinite loop.
Fix this by making FoldConstantArithmetic use getNode to decide how to fold each
vector element, the same as FoldConstantVectorArithmetic does, and rather than
adding the constant shift to the work list instead only apply the transformation
if it's already been folded into a constant, as if it's not we're going to loop
endlessly. Additionally add missing NoOpaques to one of those transformations,
which I noticed when writing the tests for this.
Differential Revision: https://reviews.llvm.org/D26605
llvm-svn: 287766
In rL283190, I added some InstAlias definitions to generate extended mnemonics
for some uses of the XXPERMDI instruction. However, when the assembler matches
these extended mnemonics, it matches the new instruction in situations where it
should match the old one.
This patch removes these definitions and accomplishes that by defining these
mnemonics with additional instructions that are isCodeGenOnly.
Fixes PR31127.
llvm-svn: 287765
Implemented widening (v2f32) and splitting (v16f64).
On splitting, I use "popcnt" to calculate memory increment.
More type legalization work will come in the next patches.
llvm-svn: 287761
Simon Pilgrim