point values to their integer representation through the SSE intrinsic
calls. This is the last part of a README.txt entry for which I have real
world examples.
llvm-svn: 123206
There's an inherent tension in DAGCombine between assuming
that things will be put in canonical form, and the Depth
mechanism that disables transformations when recursion gets
too deep. It would not surprise me if there's a lot of little
bugs like this one waiting to be discovered. The mechanism
seems fragile and I'd suggest looking at it from a design viewpoint.
llvm-svn: 123191
larger memsets. Among other things, this fixes rdar://8760394 and
allows us to handle "Example 2" from http://blog.regehr.org/archives/320,
compiling it into a single 4096-byte memset:
_mad_synth_mute: ## @mad_synth_mute
## BB#0: ## %entry
pushq %rax
movl $4096, %esi ## imm = 0x1000
callq ___bzero
popq %rax
ret
llvm-svn: 123089
1. Rip out LoopRotate's domfrontier updating code. It isn't
needed now that LICM doesn't use DF and it is super complex
and gross.
2. Make DomTree updating code a lot simpler and faster. The
old loop over all the blocks was just to find a block??
3. Change the code that inserts the new preheader to just use
SplitCriticalEdge instead of doing an overcomplex
reimplementation of it.
No behavior change, except for the name of the inserted preheader.
llvm-svn: 123072
Add a unnamed_addr bit to global variables and functions. This will be used
to indicate that the address is not significant and therefore the constant
or function can be merged with others.
If an optimization pass can show that an address is not used, it can set this.
Examples of things that can have this set by the FE are globals created to
hold string literals and C++ constructors.
Adding unnamed_addr to a non-const global should have no effect unless
an optimization can transform that global into a constant.
Aliases are not allowed to have unnamed_addr since I couldn't figure
out any use for it.
llvm-svn: 123063
them into the loop preheader, eliminating silly instructions like
"icmp i32 0, 100" in fixed tripcount loops. This also better exposes the
bigger problem with loop rotate that I'd like to fix: once this has been
folded, the duplicated conditional branch *often* turns into an uncond branch.
Not aggressively handling this is pessimizing later loop optimizations
somethin' fierce by making "dominates all exit blocks" checks fail.
llvm-svn: 123060
Instead encode llvm IR level property "HasSideEffects" in an operand (shared
with IsAlignStack). Added MachineInstrs::hasUnmodeledSideEffects() to check
the operand when the instruction is an INLINEASM.
This allows memory instructions to be moved around INLINEASM instructions.
llvm-svn: 123044
X = sext x; x >s c ? X : C+1 --> X = sext x; X <s C+1 ? C+1 : X
X = sext x; x <s c ? X : C-1 --> X = sext x; X >s C-1 ? C-1 : X
X = zext x; x >u c ? X : C+1 --> X = zext x; X <u C+1 ? C+1 : X
X = zext x; x <u c ? X : C-1 --> X = zext x; X >u C-1 ? C-1 : X
X = sext x; x >u c ? X : C+1 --> X = sext x; X <u C+1 ? C+1 : X
X = sext x; x <u c ? X : C-1 --> X = sext x; X >u C-1 ? C-1 : X
Instead of calculating this with mixed types promote all to the
larger type. This enables scalar evolution to analyze this
expression. PR8866
llvm-svn: 123034
Also fix an off-by-one in SelectionDAGBuilder that was preventing shuffle
vectors from being translated to EXTRACT_SUBVECTOR.
Patch by Tim Northover.
The test changes are needed to keep those spill-q tests from testing aligned
spills and restores. If the only aligned stack objects are spill slots, we
no longer realign the stack frame. Prior to this patch, an EXTRACT_SUBVECTOR
was legalized by loading from the stack, which created an aligned frame index.
Now, however, there is nothing except the spill slot in the stack frame, so
I added an aligned alloca.
llvm-svn: 122995
The theory is it's still faster than a pair of movq / a quad of movl. This
will probably hurt older chips like P4 but should run faster on current
and future Intel processors. rdar://8817010
llvm-svn: 122955
ret i64 ptrtoint (i8* getelementptr ([1000 x i8]* @X, i64 1, i64 sub (i64 0, i64 ptrtoint ([1000 x i8]* @X to i64))) to i64)
to "ret i64 1000". This allows us to correctly compute the trip count
on a loop in PR8883, which occurs with std::fill on a char array. This
allows us to transform it into a memset with a constant size.
llvm-svn: 122950
up freebsd bootloader. However, this doesn't make much sense for Darwin, whose
-Os is meant to optimize for size only if it doesn't hurt performance.
rdar://8821501
llvm-svn: 122936
when safe.
The testcase is basically this nested loop:
void foo(char *X) {
for (int i = 0; i != 100; ++i)
for (int j = 0; j != 100; ++j)
X[j+i*100] = 0;
}
which gets turned into a single memset now. clang -O3 doesn't optimize
this yet though due to a phase ordering issue I haven't analyzed yet.
llvm-svn: 122806
prologue and epilogue if the adjustment is 8. Similarly, use pushl / popl if
the adjustment is 4 in 32-bit mode.
In the epilogue, takes care to pop to a caller-saved register that's not live
at the exit (either return or tailcall instruction).
rdar://8771137
llvm-svn: 122783
sure that the loop we're promoting into a memcpy doesn't mutate the input
of the memcpy. Before we were just checking that the dest of the memcpy
wasn't mod/ref'd by the loop.
llvm-svn: 122712
This allows us to compile:
void test(char *s, int a) {
__builtin_memset(s, a, 15);
}
into 1 mul + 3 stores instead of 3 muls + 3 stores.
llvm-svn: 122710
We could implement a DAGCombine to turn x * 0x0101 back into logic operations
on targets that doesn't support the multiply or it is slow (p4) if someone cares
enough.
Example code:
void test(char *s, int a) {
__builtin_memset(s, a, 4);
}
before:
_test: ## @test
movzbl 8(%esp), %eax
movl %eax, %ecx
shll $8, %ecx
orl %eax, %ecx
movl %ecx, %eax
shll $16, %eax
orl %ecx, %eax
movl 4(%esp), %ecx
movl %eax, 4(%ecx)
movl %eax, (%ecx)
ret
after:
_test: ## @test
movzbl 8(%esp), %eax
imull $16843009, %eax, %eax ## imm = 0x1010101
movl 4(%esp), %ecx
movl %eax, 4(%ecx)
movl %eax, (%ecx)
ret
llvm-svn: 122707
in the PR, the pass could break LCSSA form when inserting preheaders. It probably
would be easy enough to fix this, but since currently we always go into LCSSA form
after running this pass, doing so is not urgent.
llvm-svn: 122695
header for now for memset/memcpy opportunities. It turns out that loop-rotate
is successfully rotating loops, but *DOESN'T MERGE THE BLOCKS*, turning "for
loops" into 2 basic block loops that loop-idiom was ignoring.
With this fix, we form many *many* more memcpy and memsets than before, including
on the "history" loops in the viterbi benchmark, which look like this:
for (j=0; j<MAX_history; ++j) {
history_new[i][j+1] = history[2*i][j];
}
Transforming these loops into memcpy's speeds up the viterbi benchmark from
11.98s to 3.55s on my machine. Woo.
llvm-svn: 122685
numbering, in which it considers (for example) "%a = add i32 %x, %y" and
"%b = add i32 %x, %y" to be equal because the operands are equal and the
result of the instructions only depends on the values of the operands.
This has almost no effect (it removes 4 instructions from gcc-as-one-file),
and perhaps slows down compilation: I measured a 0.4% slowdown on the large
gcc-as-one-file testcase, but it wasn't statistically significant.
llvm-svn: 122654
preprocessed .s files and matches darwin gas. rdar://8798690
Also fix a comment on the next line of AsmParser.cpp after this new code.
llvm-svn: 122531
If the basic block containing the BCCi64 (or BCCZi64) instruction ends with
an unconditional branch, that branch needs to be deleted before appending
the expansion of the BCCi64 to the end of the block.
llvm-svn: 122521
See http://caml.inria.fr/mantis/view.php?id=4166
If we call only external functions from a module, then its 'let _' bindings
don't get executed, which means that the exceptions don't get registered for use
in the C code.
This in turn causes llvm_raise to call raise_with_arg() with a NULL pointer and
cause a segmentation fault.
The workaround is to declare all 'external' functions as 'val' in these .mli
files.
Also added a separate testcase (the testcase must call only external functions
for the bug to occur).
llvm-svn: 122497
In the bottom-up selection DAG scheduling, handle two-address
instructions that read/write unspillable registers. Treat
the entire chain of two-address nodes as a single live range.
llvm-svn: 122472
the original instruction, half the cases were missed (making it not
wrong but suboptimal). Also correct a typo (A <-> B) in the second
chunk.
llvm-svn: 122414
if both A op B and A op C simplify. This fires fairly often but doesn't
make that much difference. On gcc-as-one-file it removes two "and"s and
turns one branch into a select.
llvm-svn: 122399
loads properly. We miscompiled the testcase into:
_test: ## @test
movl $128, (%rdi)
movzbl 1(%rdi), %eax
ret
Now we get a proper:
_test: ## @test
movl $128, (%rdi)
movsbl (%rdi), %eax
movzbl %ah, %eax
ret
This fixes PR8757.
llvm-svn: 122392
I still think that LVI should be handling this, but that capability is some ways off in the future,
and this matters for some significant benchmarks.
llvm-svn: 122378
count operand. These should be the same but apparently are
not always, and this is cleaner anyway. This improves the
code in an existing test.
llvm-svn: 122354
being tested. This ensures that we test the tools just built and not
some random tools that might happen to be in the user's PATH. This
makes LLVM testing much more stable and predictable.
llvm-svn: 122341
a couple of existing transforms. This fires surprisingly often, for
example when compiling gcc "(X+(-1))+1->X" fires quite a lot as well
as various "and" simplifications (usually with a phi node operand).
Most of the time this doesn't make a real difference since the same
thing would have been done elsewhere anyway, eg: by instcombine, but
there are a few places where this results in simplifications that we
were not doing before.
llvm-svn: 122326
Type legalization splits up i64 values into pairs of i32 values, which leads
to poor quality code when inserting or extracting i64 vector elements.
If the vector element is loaded or stored, it can be treated as an f64 value
and loaded or stored directly from a VPR register. Use the pre-legalization
DAG combiner to cast those vector elements to f64 types so that the type
legalizer won't mess them up. Radar 8755338.
llvm-svn: 122319
(they had just been forgotten before). Adding Xor causes "main" in the
existing testcase 2010-11-01-lshr-mask.ll to be hugely more simplified.
llvm-svn: 122245
argument. The generated alloca has to have at least the alignment of the
byval, if not, the client may be making assumptions that the new alloca won't
satisfy.
llvm-svn: 122234
the same as setcc. Optimize ADDC(0,0,FLAGS) -> SET_CARRY(FLAGS). This is
a step towards finishing off PR5443. In the testcase in that bug we now get:
movq %rdi, %rax
addq %rsi, %rax
sbbq %rcx, %rcx
testb $1, %cl
setne %dl
ret
instead of:
movq %rdi, %rax
addq %rsi, %rax
movl $0, %ecx
adcq $0, %rcx
testq %rcx, %rcx
setne %dl
ret
llvm-svn: 122219
doesn't, match it back to setb.
On a 64-bit version of the testcase before we'd get:
movq %rdi, %rax
addq %rsi, %rax
sbbb %dl, %dl
andb $1, %dl
ret
now we get:
movq %rdi, %rax
addq %rsi, %rax
setb %dl
ret
llvm-svn: 122217
This resolves a README entry and technically resolves PR4916,
but we still get poor code for the testcase in that PR because
GVN isn't CSE'ing uadd with add, filed as PR8817.
Previously we got:
_test7: ## @test7
addq %rsi, %rdi
cmpq %rdi, %rsi
movl $42, %eax
cmovaq %rsi, %rax
ret
Now we get:
_test7: ## @test7
addq %rsi, %rdi
movl $42, %eax
cmovbq %rsi, %rax
ret
llvm-svn: 122182
sadd formed is half the size of the original type. We can
now compile this into a sadd.i8:
unsigned char X(char a, char b) {
int res = a+b;
if ((unsigned )(res+128) > 255U)
abort();
return res;
}
llvm-svn: 122178
checking to see if the high bits of the original add result were dead.
Inserting a smaller add and zexting back to that size is not good enough.
This is likely to be the fix for 8816.
llvm-svn: 122177
which have trapping constant exprs in them due to PHI nodes.
Eliminating them can cause the constant expr to be evalutated
on new paths if the input edges are critical.
llvm-svn: 122164
It turns out that ppc backend has really weird interdependencies
over different hooks and all stuff is fragile wrt small changes.
This should fix PR8749
llvm-svn: 122155
may be called. If the entry block is empty, the insertion point iterator will be
the "end()" value. Calling ->getParent() on it (among others) causes problems.
Modify materializeFrameBaseRegister to take the machine basic block and insert
the frame base register at the beginning of that block. (It's very similar to
what the code does all ready. The only difference is that it will always insert
at the beginning of the entry block instead of after a previous materialization
of the frame base register. I doubt that that matters here.)
<rdar://problem/8782198>
llvm-svn: 122104
BUILD_VECTOR operands where the element type is not legal. I had previously
changed this code to insert TRUNCATE operations, but that was just wrong.
llvm-svn: 122102
on the DragonEgg self-host bot. Unfortunately, the testcase is pretty messy and doesn't reduce well due to
interactions with other parts of InstCombine.
llvm-svn: 122072
a null endptr argument, because they may write to errno.
This fixes a seflhost miscompile observed on Linux targets when TBAA
was enabled.
llvm-svn: 122014
dragonegg self-host buildbot. Original commit message:
Add an InstCombine transform to recognize instances of manual overflow-safe addition
(performing the addition in a wider type and explicitly checking for overflow), and
fold them down to intrinsics. This currently only supports signed-addition, but could
be generalized if someone works out the magic constant formulas for other operations.
llvm-svn: 121965
(performing the addition in a wider type and explicitly checking for overflow), and
fold them down to intrinsics. This currently only supports signed-addition, but could
be generalized if someone works out the magic constant formulas for other operations.
Fixes <rdar://problem/8558713>.
llvm-svn: 121905
and "save_volatiles" correctly. This completes the custom calling convention
functionality changes for the MBlaze backend that were started in 121888.
llvm-svn: 121891
When it sees a promising select it now tries to figure out whether the condition of the select is known in any of the predecessors and if so it maps the operands appropriately.
llvm-svn: 121859
With this we don't need the EffectiveSize field anymore. Without that field
LayoutFragment only updates offsets and we don't need to invalidate the
current fragment when it is relaxed (only the ones following it).
This is also a very small improvement in the accuracy of the layout info as
we now use the after relaxation size immediately.
llvm-svn: 121857
regB = move RCX
regA = op regB, regC
RAX = move regA
where both regB and regC are killed. If regB is constrainted to non-compatible
physical registers but regC is not constrainted at all, then it's better to
commute the instruction.
movl %edi, %eax
shlq $32, %rcx
leaq (%rcx,%rax), %rax
=>
movl %edi, %eax
shlq $32, %rcx
orq %rcx, %rax
rdar://8762995
llvm-svn: 121793
which is simpler than finding a place to insert in BB.
- Don't perform the 'if condition hoisting' xform on certain
i1 PHIs, as it interferes with switch formation.
This re-fixes "example 7", without breaking the world hopefully.
llvm-svn: 121764
first, it can kick in on blocks whose conditions have been
folded to a constant, even though one of the edges will be
trivially folded.
second, it doesn't clean up the "if diamond" that it just
eliminated away. This is a problem because other simplifycfg
xforms kick in depending on the order of block visitation,
causing pointless work.
llvm-svn: 121762
Use the same COPY_TO_REGCLASS approach as for the 2-register *_sfp instructions.
This change made a big difference in the code generated for the
CodeGen/Thumb2/cross-rc-coalescing-2.ll test: The coalescer is still doing
a fine job, but some instructions that were previously moved outside the loop
are not moved now. It's using fewer VFP registers now, which is generally
a good thing, so I think the estimates for register pressure changed and that
affected the LICM behavior. Since that isn't obviously wrong, I've just
changed the test file. This completes the work for Radar 8711675.
llvm-svn: 121730
when the wider type is legal. This allows us to compile:
define zeroext i16 @test1(i16 zeroext %x) nounwind {
entry:
%div = udiv i16 %x, 33
ret i16 %div
}
into:
test1: # @test1
movzwl 4(%esp), %eax
imull $63551, %eax, %eax # imm = 0xF83F
shrl $21, %eax
ret
instead of:
test1: # @test1
movw $-1985, %ax # imm = 0xFFFFFFFFFFFFF83F
mulw 4(%esp)
andl $65504, %edx # imm = 0xFFE0
movl %edx, %eax
shrl $5, %eax
ret
Implementing rdar://8760399 and example #4 from:
http://blog.regehr.org/archives/320
We should implement the same thing for [su]mul_hilo, but I don't
have immediate plans to do this.
llvm-svn: 121696
when simplifying, allowing them to be eagerly turned into switches. This
is the last step required to get "Example 7" from this blog post:
http://blog.regehr.org/archives/320
On X86, we now generate this machine code, which (to my eye) seems better
than the ICC generated code:
_crud: ## @crud
## BB#0: ## %entry
cmpb $33, %dil
jb LBB0_4
## BB#1: ## %switch.early.test
addb $-34, %dil
cmpb $58, %dil
ja LBB0_3
## BB#2: ## %switch.early.test
movzbl %dil, %eax
movabsq $288230376537592865, %rcx ## imm = 0x400000017001421
btq %rax, %rcx
jb LBB0_4
LBB0_3: ## %lor.rhs
xorl %eax, %eax
ret
LBB0_4: ## %lor.end
movl $1, %eax
ret
llvm-svn: 121690
Eric Christopher