This attribute is used to ensure the guard page is triggered on stack
overflow. Stack frames larger than the guard page size will generate
a call to __probestack to touch each page so the guard page won't
be skipped.
Reviewed By: majnemer
Differential Revision: https://reviews.llvm.org/D34386
llvm-svn: 305939
Using various methods, BasicAA tries to determine whether two
GetElementPtr memory locations alias when its base pointers are known
to be equal. When none of its heuristics are applicable, it falls back
to PartialAlias to, according to a comment, protect TBAA making a wrong
decision in case of unions and malloc. PartialAlias is not correct,
because a PartialAlias result implies that some, but not all, bytes
overlap which is not necessarily the case here.
AAResults returns the first analysis result that is not MayAlias.
BasicAA is always the first alias analysis. When it returns
PartialAlias, no other analysis is queried to give a more exact result
(which was the intention of returning PartialAlias instead of MayAlias).
For instance, ScopedAA could return a more accurate result.
The PartialAlias hack was introduced in r131781 (and re-applied in
r132632 after some reverts) to fix llvm.org/PR9971 where TBAA returns a
wrong NoAlias result due to a union. A test case for the malloc case
mentioned in the comment was not provided and I don't think it is
affected since it returns an omnipotent char anyway.
Since r303851 (https://reviews.llvm.org/D33328) clang does emit specific
TBAA for unions anymore (but "omnipotent char" instead). Hence, the
PartialAlias workaround is not required anymore.
This patch passes the test-suite and check-llvm/check-clang of a
self-hoisted build on x64.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D34318
llvm-svn: 305938
Summary: r305009 disables recursive inlining for indirect calls in sample loader pass. The same logic applies to direct recursive calls.
Reviewers: iteratee, davidxl
Reviewed By: iteratee
Subscribers: sanjoy, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D34456
llvm-svn: 305934
Define target hook isReallyTriviallyReMaterializable() to explicitly specify
PowerPC instructions that are trivially rematerializable. This will allow
the MachineLICM pass to accurately identify PPC instructions that should always
be hoisted.
Differential Revision: https://reviews.llvm.org/D34255
llvm-svn: 305932
I don't think there's any visible difference from having the wrong layout
for the 32-bit case at this point, but that could change in the future.
llvm-svn: 305931
Summary:
I noticed that passing known bits across these intrinsics isn't great at capturing the information we really know. Turning known bits of the input into known bits of a count output isn't able to convey a lot of what we really know.
This patch adds range metadata to these intrinsics based on the known bits.
Currently the patch punts if we already have range metadata present.
Reviewers: spatel, RKSimon, davide, majnemer
Reviewed By: RKSimon
Subscribers: sanjoy, hfinkel, llvm-commits
Differential Revision: https://reviews.llvm.org/D32582
llvm-svn: 305927
Summary:
Previously this folding had no checks to see if it was going to result in less instructions. This was pointed out during the review of D34184
This patch adds code to count how many instructions its going to create vs how many its going to remove so we can make a proper decision.
Reviewers: spatel, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34437
llvm-svn: 305926
Added test file for ARMv8.1 LSE Atomics that I forgot to include in
commit r305893.
Patch by Ananth Jasty.
Differential Revision: https://reviews.llvm.org/D33586
Change-Id: Ic1ad8ed87c1b584c4c791b459a686c866a3c3087
llvm-svn: 305918
This patch adds one more condition in selection DINS/INS
instruction, which fixes MultiSource/Applications/JM/ldecod/
for mips32r2 (and mips64r2 n32 abi).
Differential Revision: https://reviews.llvm.org/D33725
llvm-svn: 305888
Summary:
This patch updates promoteLoadFromStore to use the store MachineOperand as the
source operand of the of the new instruction instead of creating a new
register MachineOperand. This way, the existing register flags are
preserved.
This fixes PR33468 (https://bugs.llvm.org/show_bug.cgi?id=33468).
Reviewers: MatzeB, t.p.northover, junbuml
Reviewed By: MatzeB
Subscribers: aemerson, rengolin, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34402
llvm-svn: 305885
Add support for combining a build vector to a shuffle.
When the build vector is of extracted elements from 2 vectors (vec1, vec2) where vec2 is 2 times smaller than vec1.
llvm-svn: 305883
MulOpsInlineThreshold option of SCEV is defaulted to 1000, which is inadequately high.
When constructing SCEVs of expressions like:
x1 = a * a
x2 = x1 * x1
x3 = x2 * x2
...
We actually have huge SCEVs with max allowed amount of operands inlined.
Such expressions are easy to get from unrolling of loops looking like
x = a
for (i = 0; i < n; i++)
x = x * x
Or more tricky cases where big powers are involved. If some non-linear analysis
tries to work with a SCEV that has 1000 operands, it may lead to excessively long
compilation. The attached test does not pass within 1 minute with default threshold.
This patch decreases its default value to 32, which looks much more reasonable if we
use analyzes with complexity O(N^2) or O(N^3) working with SCEV.
Differential Revision: https://reviews.llvm.org/D34397
llvm-svn: 305882
Summary:
When we're building with XRay instrumentation, we use a trick that
preserves references from the function to a function sled index. This
index table lives in a separate section, and without this trick the
linker is free to garbage-collect this section and all the segments it
refers to. Until we're able to tell the linkers to preserve these
sections, we use this reference trick to keep around both the index and
the entries in the instrumentation map.
Before this change we emitted both a synthetic reference to the label in
the instrumentation map, and to the entry in the function map index.
This change removes the first synthetic reference and only emits one
synthetic reference to the index -- the index entry has the references
to the labels in the instrumentation map, so the linker will still
preserve those if the function itself is preserved.
This reduces the amount of synthetic references we emit from 16 bytes to
just 8 bytes in x86_64, and similarly to other platforms.
Reviewers: dblaikie
Subscribers: javed.absar, kpw, pelikan, llvm-commits
Differential Revision: https://reviews.llvm.org/D34340
llvm-svn: 305880
Right now areMemoryOpsAliased has an assertion justified as:
MMO1 should have a value due it comes from operation we'd like to use
as implicit null check.
assert(MMO1->getValue() && "MMO1 should have a Value!");
However, it is possible for that invariant to not be upheld in the
following situation (conceptually):
Null check %RAX
NotNullSucc:
%RAX = LEA %RSP, 16 // I0
%RDX = MOV64rm %RAX // I1
With the current code, we will have an early exit from
ImplicitNullChecks::isSuitableMemoryOp on I0 with SR_Unsuitable.
However, I1 will look plausible (since it loads from %RAX) and
will go ahead and call areMemoryOpsAliased(I1, I0). This will cause
us to fail the assert mentioned above since I1 does not load from an
IR level value and thus is allowed to have a non-Value base address.
The fix is to bail out earlier whenever we see an unsuitable
instruction overwrite PointerReg. This would guarantee that when we
call areMemoryOpsAliased, we're guaranteed to be looking at an
instruction that loads from or stores to an IR level value.
Original Patch Author: sanjoy
Reviewers: sanjoy, mkazantsev, reames
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34385
llvm-svn: 305879
We forgot to serialize these because llvm-readobj didn't dump them. They
are typically all zeros in an object file. The linker fills them in with
relocations before adding them to the PDB. Now we can properly round
trip these symbols through pdb2yaml -> yaml2pdb.
I made these fields optional with a zero default so that we can elide
them from our test cases.
llvm-svn: 305857
This reverts commit r305852.
The testcase already exists but I moved it to the X86 directory on a
using a different machine and got confused...
llvm-svn: 305856
The instruction it falls over on is an IMPLICT_DEF that also happens
to be the only instruction in its lexical scope. That LexicalScope has
never been created because its range is empty. This patch skips over
all meta-instructions instead of just DBG_VALUEs.
Thanks to David Blaikie for providing a testcase!
llvm-svn: 305853
If there is an immediate operand we shall not shrink V_SUBB_U32
and V_ADDC_U32, it does not fit e32 encoding.
Differential Revison: https://reviews.llvm.org/D34291
llvm-svn: 305840
Before it was possible to partially fold use instructions
before the defs. After the xor is folded into a copy, the same
mov can end up in the fold list twice, so on the second attempt
it will fail expecting to see a register to fold.
llvm-svn: 305821
This does some improvements/cleanup to the recently introduced
scavengeRegisterBackwards() functionality:
- Rewrite findSurvivorBackwards algorithm to use the existing
LiveRegUnit::accumulateBackward() code. This also avoids the Available
and Candidates bitset and just need 1 LiveRegUnit instance
(= 1 bitset).
- Pick registers in allocation order instead of register number order.
llvm-svn: 305817
There are a couple of potential improvements as seen in the IR and asm:
1. We're unnecessarily extending to a larger type to compare values.
2. The codegen for (select cond, 1, -1) could avoid a cmov.
(or we could change the order of the compares, so we have a select with 0 operand)
llvm-svn: 305802
We were incorrectly sign extending into the high word (as you would for
SMULO) when legalizing UMULO in terms of a wider full multiplication.
Patch by James Duley.
llvm-svn: 305800
We have a large portfolio of folds for and-of-icmps and or-of-icmps in InstSimplify and InstCombine,
but hardly anything for xor-of-icmps. Rather than trying to rethink and translate all of those folds,
we can use the truth table definition of xor:
X ^ Y --> (X | Y) & !(X & Y)
...to see if we can convert the xor to and/or and then use the existing folds.
http://rise4fun.com/Alive/J9v
Differential Revision: https://reviews.llvm.org/D33342
llvm-svn: 305792
Summary:
As part of this
* Emitted instructions now have named MachineInstr variables associated
with them. This isn't particularly important yet but it's a small step
towards multiple-insn emission.
* constrainSelectedInstRegOperands() is no longer hardcoded. It's now added
as the ConstrainOperandsToDefinitionAction() action. COPY_TO_REGCLASS uses
an alternate constraint mechanism ConstrainOperandToRegClassAction() which
supports arbitrary constraints such as that defined by COPY_TO_REGCLASS.
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: ab
Subscribers: javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D33590
llvm-svn: 305791
Summary:
In some cases legalization ends up with not symmetric merge/unmerge nodes.
Transform it to merge/unmerge nodes.
Reviewers: t.p.northover, qcolombet, zvi
Reviewed By: t.p.northover
Subscribers: rovka, kristof.beyls, guyblank, llvm-commits
Differential Revision: https://reviews.llvm.org/D33626
llvm-svn: 305783
Resubmission of r305387, which was reverted at r305390. The Address
Sanitizer caught a stack-use-after-scope of a Twine variable. This
is now fixed by passing the Twine directly as a function parameter.
The ARM backend asserts against constant pool lowering when it generates
execute-only code in order to prevent the generation of constant pools in
the text section. It appears that target independent optimizations might
generate DAG nodes that represent constant pools. By lowering such nodes
as global addresses we don't violate the semantics of execute-only code
and also it is guaranteed that execute-only behaves correct with the
position-independent addressing modes that support execute-only code.
Differential Revision: https://reviews.llvm.org/D33773
llvm-svn: 305776
The offset may not be an inline immediate, so this needs
to be materialized into a register. The post-RA run of
SIShrinkInstructions is able to fold it later if it can.
llvm-svn: 305761
It adds it for the target after inlining but before SROA where
we can get most out of it.
Differential Revision: https://reviews.llvm.org/D34366
llvm-svn: 305759
The AMD64rm instruction used in the test case was incorrect. Since
the first input register to AND64rm is tied to output register, they
must be the same.
Thanks for Jesper Antonsson for pointing this out!
llvm-svn: 305756
in the base address.
Without this Mach-O files, like 64-bit executables, don’t have the correct
addresses printed for their exports. As the default is to link at address
0x100000000 not zero.
llvm-svn: 305744
This is the last step needed to avoid regressions for x86 before we flip the switch to allow
expansion of the smallest set of memcpy() via CGP. The DAG version checks for constant strings,
so we need to do that here too.
FWIW, the 2 constant test is not handled by LibCallSimplifier::optimizeMemCmp() because that
code is limited to 8-bit constant arrays. LibCallSimplifier will also fail to optimize some 1
constant tests because its alignment requirements are too strict (shouldn't require alignment
for a constant operand).
Differential Revision: https://reviews.llvm.org/D34071
llvm-svn: 305734
In order to reduce swift binary sizes, Apple is now stripping swift symbols
from the nlist symbol table. llvm-nm currently only looks at the nlist symbol
table and misses symbols that are present in dyld info. This makes it hard to
know the set of symbols for a binary using just llvm-nm. Unless you know to
run llvm-objdump -exports-trie that can output the exported symbols in the dyld
info from the export trie, which does so but in a different format.
Also moving forward the time may come a when a fully linked Mach-O file that
uses dyld will no longer have an nlist symbol table to avoid duplicating the
symbol information.
This change adds three flags to llvm-nm, -add-dyldinfo, -no-dyldinfo, and
-dyldinfo-only.
The first, -add-dyldinfo, has the same effect as when the new bit in the Mach-O
header, MH_NLIST_OUTOFSYNC_WITH_DYLDINFO, appears in a binary. In that it
looks through the dyld info from the export trie and adds symbols to be printed
that are not already in its internal SymbolList variable. The -no-dyldinfo
option turns this behavior off.
The -dyldinfo-only option only looks at the dyld information and recreates the
symbol table from the dyld info from the export trie and binding information.
As if it the Mach-O file had no nlist symbol table.
Also fixed a few bugs with Mach-O N_INDR symbols not correctly printing the
indirect name, or in the same format as the old nm-classic program.
rdar://32021551
llvm-svn: 305733
Summary:
Existing heuristic uses the ratio between the function entry
frequency and the loop invocation frequency to find cold loops. However,
even if the loop executes frequently, if it has a small trip count per
each invocation, vectorization is not beneficial. On the other hand,
even if the loop invocation frequency is much smaller than the function
invocation frequency, if the trip count is high it is still beneficial
to vectorize the loop.
This patch uses estimated trip count computed from the profile metadata
as a primary metric to determine coldness of the loop. If the estimated
trip count cannot be computed, it falls back to the original heuristics.
Reviewers: Ayal, mssimpso, mkuper, danielcdh, wmi, tejohnson
Reviewed By: tejohnson
Subscribers: tejohnson, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32451
llvm-svn: 305729
Summary:
Some optimizations in AddReachableCodeToWorklist did not update
the MadeIRChange state. This could happen both when removing
trivially dead instructions (DCE) and at constant folds.
It is essential that changes to the IR is reported correctly,
since for example InstCombinePass::run() will indicate that all
analyses are preserved otherwise.
And the CGPassManager determines if the CallGraph is up-to-date
based on status from InstructionCombiningPass::runOnFunction().
The new test case early_dce_clobbers_callgraph.ll is a reproducer
for some asserts that started to trigger after changes in the
inliner in r305245. With this patch the test case passes again.
Reviewers: sanjoy, craig.topper, dblaikie
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34346
llvm-svn: 305725
This seems to be interacting badly with ASan somehow, causing false reports of
heap-buffer overflows: PR33514.
> Summary:
> The patch makes instruction count the highest priority for
> LSR solution for X86 (previously registers had highest priority).
>
> Reviewers: qcolombet
>
> Differential Revision: http://reviews.llvm.org/D30562
>
> From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 305720
Summary:
These 4 patterns have the same one use check repeated twice for each. Once without a cast and one with. But the cast has no effect on what method is called.
For the OR case I believe it is always profitable regardless of the number of uses since we'll never increase the instruction count.
For the AND case I believe it is profitable if the pair of xors has one use such that we'll get rid of it completely. Or if the C value is something freely invertible, in which case the not doesn't cost anything.
Reviewers: spatel, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34308
llvm-svn: 305705
Summary:
Currently we don't try to do anything with vector xors.
This patch adds support for removing duplicate pairs from a chain of vector xors as its pretty easy to support. We still dont' try to combine the xors with and/ors, but I might try that in a future patch.
Reviewers: mcrosier, davide, resistor
Reviewed By: mcrosier
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34338
llvm-svn: 305704
A new Gfx9 dasm test added with approx 29000 cases.
Existing tests extended by (approx.):
* Gfx7 asm: 5000 test cases
* Gfx8 asm: 5000 test cases
* Gfx9 asm: 14400 test cases
* Gfx8 dasm: 5200 test cases
llvm-svn: 305702
Summary:
After a single predecessor is merged into a basic block, we need to invalidate
the LVI information for the new merged block, when LVI is not provably true for
all of instructions in the new block.
The test cases added show the correct LVI information using the LVI printer
pass.
Reviewers: reames, dberlin, davide, sanjoy
Reviewed by: dberlin, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34108
llvm-svn: 305699
Summary: use AA to tell whether a load can be moved before a call that writes to memory.
Reviewers: dberlin, davide, sanjoy, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, llvm-commits
Differential Revision: https://reviews.llvm.org/D34115
llvm-svn: 305698
Summary: Implement some of the simplest addressing modes.It should help to test ABI.
Reviewers: zvi, guyblank
Reviewed By: guyblank
Subscribers: rovka, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D33888
llvm-svn: 305691
Add support throughout the pipeline:
- mark as legal for s32 and pointers
- map to GPRs
- lower to a sequence of instructions, which moves 0 or 1 into the
result register based on the flags set by a CMPrr
We have copied from FastISel a helper function which maps CmpInst
predicates into ARMCC codes. Ideally, we should be able to move it
somewhere that both FastISel and GlobalISel can use.
llvm-svn: 305672
Current implementation of SCEVExpander demonstrates a very naive behavior when
it deals with power calculation. For example, a SCEV for x^8 looks like
(x * x * x * x * x * x * x * x)
If we try to expand it, it generates a very straightforward sequence of muls, like:
x2 = mul x, x
x3 = mul x2, x
x4 = mul x3, x
...
x8 = mul x7, x
This is a non-efficient way of doing that. A better way is to generate a sequence of
binary power calculation. In this case the expanded calculation will look like:
x2 = mul x, x
x4 = mul x2, x2
x8 = mul x4, x4
In some cases the code size reduction for such SCEVs is dramatic. If we had a loop:
x = a;
for (int i = 0; i < 3; i++)
x = x * x;
And this loop have been fully unrolled, we have something like:
x = a;
x2 = x * x;
x4 = x2 * x2;
x8 = x4 * x4;
The SCEV for x8 is the same as in example above, and if we for some reason
want to expand it, we will generate naively 7 multiplications instead of 3.
The BinPow expansion algorithm here allows to keep code size reasonable.
This patch teaches SCEV Expander to generate a sequence of BinPow multiplications
if we have repeating arguments in SCEVMulExpressions.
Differential Revision: https://reviews.llvm.org/D34025
llvm-svn: 305663
Summary:
This allows strlen to be moved out of the loop in case its argument is
not modified in the loop in LICM.
Reviewers: hfinkel, davide, sanjoy, dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34323
llvm-svn: 305641
Re-apply r276044/r279124/r305516. Fixed a problem where we would refuse
to place spills as the very first instruciton of a basic block and thus
artifically increase pressure (test in
test/CodeGen/PowerPC/scavenging.mir:spill_at_begin)
This is a variant of scavengeRegister() that works for
enterBasicBlockEnd()/backward(). The benefit of the backward mode is
that it is not affected by incomplete kill flags.
This patch also changes
PrologEpilogInserter::doScavengeFrameVirtualRegs() to use the register
scavenger in backwards mode.
Differential Revision: http://reviews.llvm.org/D21885
llvm-svn: 305625
This ensures that symbolic relocations are generated for stack
pointer manipulations.
These relocations are of type R_WEBASSEMBLY_GLOBAL_INDEX_LEB.
This change also adds support for reading relocations of this
type in WasmObjectFile.cpp.
Since its a globally imported symbol this does mean that
the get_global/set_global instruction won't be valid until
the objects are linked that global used in no longer an
imported global.
Differential Revision: https://reviews.llvm.org/D34172
llvm-svn: 305616
Previously only the error codes were reported which
meant that useful information about malformed inputs
was not shown.
Differential Revision: https://reviews.llvm.org/D34008
llvm-svn: 305609
For the following motivating example
bool c();
void f();
bool start() {
bool result = c();
if (!c()) {
result = false;
goto exit;
}
f();
result = true;
exit:
return result;
}
we would previously generate a single DW_AT_const_value(1) because
only the DBG_VALUE in the second-to-last basic block survived
codegen. This patch improves the heuristic used to determine when a
DBG_VALUE is available at the beginning of its variable's enclosing
lexical scope:
- Stop giving singular constants blanket permission to take over the
entire scope. There is still a special case for constants in the
function prologue that we also miight want to retire later.
- Use the lexical scope information to determine available-at-entry
instead of proximity to the function prologue.
After this patch we generate a location list with a more accurate
narrower availability for the constant true value. As a pleasant side
effect, we also generate inline locations instead of location lists
where a loacation covers the entire range of the enclosing lexical
scope.
Measured on compiling llc with four targets this doesn't have an
effect on compile time and reduces the size of the debug info for llc
by ~600K.
rdar://problem/30286912
llvm-svn: 305599
The verifier should not output any message in such a case.
Added test case with no .apple_name section in the file to verify new functionality.
Made existing test case more specific.
llvm-svn: 305597
Summary:
When we fold vector constants that are operands of phi's that feed into select,
we need to set the correct insertion point for the *new* selects that get generated.
The correct insertion point is the incoming block for the phi.
Such cases can occur with patch r298845, which fixed folding of
vector constants, but the new selects could be inserted incorrectly (as the added
test case shows).
Reviewers: majnemer, spatel, sanjoy
Reviewed by: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34162
llvm-svn: 305591
The recommit fixes two bugs: The first one is to use CurrentBlock instead of
PREInstr's Parent as param of performScalarPREInsertion because the Parent
of a clone instruction may be uninitialized. The second one is stop PRE when
CurrentBlock to its predecessor is a backedge and an operand of CurInst is
defined inside of CurrentBlock. The same value defined inside of loop in last
iteration can not be regarded as available.
Right now scalarpre doesn't have phi-translate support, so it will miss some
simple pre opportunities. Like the following testcase, current scalarpre cannot
recognize the last "a * b" is fully redundent because a and b used by the last
"a * b" expr are both defined by phis.
long a[100], b[100], g1, g2, g3;
__attribute__((pure)) long goo();
void foo(long a, long b, long c, long d) {
g1 = a * b;
if (__builtin_expect(g2 > 3, 0)) {
a = c;
b = d;
g2 = a * b;
}
g3 = a * b; // fully redundant.
}
The patch adds phi-translate support in scalarpre. This is only a temporary
solution before the newpre based on newgvn is available.
Differential Revision: https://reviews.llvm.org/D32252
llvm-svn: 305578
Revert because of reports of some PPC input starting to spill when it
was predicted that it wouldn't and no spillslot was reserved.
This reverts commit r305516.
llvm-svn: 305566
If users tried to have a structure decl/init code like below
struct test_t t = { .memeber1 = 45 };
It is very likely that compiler will generate a readonly section
to hold up the init values for variable t. Later load of t members,
e.g., t.member1 will result in a read from readonly section.
BPF program cannot handle relocation. This will force users to
write:
struct test_t t = {};
t.member1 = 45;
This is just inconvenient and unintuitive.
This patch addresses this issue by implementing BPF PreprocessISelDAG.
For any load from a global constant structure or an global array of
constant struct, it attempts to
translate it into a constant directly. The traversal of the
constant struct and other constant data structures are similar
to where the assembler emits read-only sections.
Four different unit test cases are also added to cover
different scenarios.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 305560
Summary:
Background: http://lists.llvm.org/pipermail/llvm-dev/2017-May/112779.html
This change is to alter the prototype for the atomic memcpy intrinsic. The prototype itself is being changed to more closely resemble the semantics and parameters of the llvm.memcpy intrinsic -- to ease later combination of the llvm.memcpy and atomic memcpy intrinsics. Furthermore, the name of the atomic memcpy intrinsic is being changed to make it clear that it is not a generic atomic memcpy, but specifically a memcpy is unordered atomic.
Reviewers: reames, sanjoy, efriedma
Reviewed By: reames
Subscribers: mzolotukhin, anna, llvm-commits, skatkov
Differential Revision: https://reviews.llvm.org/D33240
llvm-svn: 305558
This reverts commit r305455. This commit was reported as breaking one of
the sanitizer buildbots. Reverting until lab.llvm.org comes back online.
llvm-svn: 305557
The second part of r305300: when placing the mux at the later location,
make sure that it won't use any register that was killed between the
two original instructions. Remove any such kills and transfer them to
the mux.
llvm-svn: 305553
Summary: This is the demorganed version of the case we already handle for the OR of iszero.
Reviewers: spatel
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34244
llvm-svn: 305548
This resubmits commit c0c249e9f2ef83e1d1e5f166b50673d92f3579d7.
It was broken due to some weird template issues, which have
since been fixed.
llvm-svn: 305517
Re-apply r276044/r279124. Trying to reproduce or disprove the ppc64
problems reported in the stage2 build last time, which I cannot
reproduce right now.
This is a variant of scavengeRegister() that works for
enterBasicBlockEnd()/backward(). The benefit of the backward mode is
that it is not affected by incomplete kill flags.
This patch also changes
PrologEpilogInserter::doScavengeFrameVirtualRegs() to use the register
scavenger in backwards mode.
Differential Revision: http://reviews.llvm.org/D21885
llvm-svn: 305516
This reverts commit 83ea17ebf2106859a51fbc2a86031b44d33696ad.
This is failing due to some strange template problems, so reverting
until it can be straightened out.
llvm-svn: 305505
After some internal discussions, we agreed that the raw output style had
outlived its usefulness. It was originally created before we had even
thought of dumping to YAML, and it was intended to give us some insight
into the internals of a PDB file. Now we have YAML mode which does
almost exactly this but is more powerful in that it can round-trip back
to a PDB, which the raw mode could not do. So the raw mode had become
purely a maintenance burden.
One option was to just delete it. However, its original goal was to be
as readable as possible while staying close to the "metal" - i.e.
presenting the output in a way that maps directly to the underlying file
format. We don't actually need that last requirement anymore since it's
covered by the yaml mode, so we could repurpose "raw" mode to actually
just be as readable as possible.
This patch implements about 80% of the functionality previously in raw
mode, but in a completely different style that is more akin to what
cvdump outputs. Records are very compressed, often times appearing on
just one line. One nice thing about this is that it makes full record
matching easier, because you can grep for indices, names, and leaf types
on a single line often.
See the tests for some examples of what the new output looks like.
Note that this patch actually regresses the functionality of raw mode in
a few areas, but only because the patch was already unreasonably large
and going 100% would have been even worse. Specifically, this patch is
missing:
The ability to dump module debug subsections (checksums, lines, etc)
The ability to dump section headers
Aside from that everything is here. While goign through the tests fixing
them all up, I found many duplicate tests. They've been deleted. In
subsequent patches I will go through and re-add the missing
functionality.
Differential Revision: https://reviews.llvm.org/D34191
llvm-svn: 305495
Add condition for MachineLICM to safely hoist instructions that utilize
non constant registers that are reserved.
On PPC, global variable access is done through the table of contents (TOC)
which is always in register X2. The ABI reserves this register in any
functions that have calls or access global variables.
A call through a function pointer involves saving, changing and restoring
this register around the call and thus MachineLICM does not consider it to
be invariant. We can however guarantee the register is preserved across the
call and thus is invariant.
Differential Revision: https://reviews.llvm.org/D33562
llvm-svn: 305490
Currently we expect A to be on the same side in both Ands but nothing guarantees that.
While there also switch to using matchers for some of the code.
Differential Revision: https://reviews.llvm.org/D34230
llvm-svn: 305487
The code assumed that we process instructions in basic block order. FastISel
processes instructions in reverse basic block order. We need to pre-assign
virtual registers before selecting otherwise we get def-use relationships wrong.
This only affects code with swifterror registers.
rdar://32659327
llvm-svn: 305484
If a regular LTO module has a summary index, then instead of linking
it into the combined regular LTO module right away, add it to the
combined summary index and associate it with a special module that
represents the combined regular LTO module.
Any such modules are linked during LTO::run(), at which time we use
the results of summary-based dead stripping to control whether to
link prevailing symbols.
Differential Revision: https://reviews.llvm.org/D33922
llvm-svn: 305482
This patch fixes a potential verification error (64-bit register operands for cmpw) with -verify-machineinstrs.
Differential Revision: https://reviews.llvm.org/D34208
llvm-svn: 305479
AVX512 compare instructions return v*i1 types.
In cases where the number of elements in the returned value are less than 8, clang adds zeroes to get a mask of v8i1 type.
Later on it's replaced with CONCAT_VECTORS, which then is lowered to many DAG nodes including insert/extract element and shift right/left nodes.
The fact that AVX512 compare instructions put the result in a k register and zeroes all its upper bits allows us to remove the extra nodes simply by copying the result to the required register class.
When lowering, identify these cases and transform them into an INSERT_SUBVECTOR node (marked legal), then catch this pattern in instructions selection phase and transform it into one avx512 cmp instruction.
Differential Revision: https://reviews.llvm.org/D33188
llvm-svn: 305465
This is a fix for PR33292 that shows a case of extremely long compilation
of a single .c file with clang, with most time spent within SCEV.
We have a mechanism of limiting recursion depth for getAddExpr to avoid
long analysis in SCEV. However, there are calls from getAddExpr to getMulExpr
and back that do not propagate the info about depth. As result of this, a chain
getAddExpr -> ... .> getAddExpr -> getMulExpr -> getAddExpr -> ... -> getAddExpr
can be extremely long, with every segment of getAddExpr's being up to max depth long.
This leads either to long compilation or crash by stack overflow. We face this situation while
analyzing big SCEVs in the test of PR33292.
This patch applies the same limit on max expression depth for getAddExpr and getMulExpr.
Differential Revision: https://reviews.llvm.org/D33984
llvm-svn: 305463
Add support for modulo for targets that have hardware division and for
those that don't. When hardware division is not available, we have to
choose the correct libcall to use. This is generally straightforward,
except for AEABI.
The AEABI variant is trickier than the other libcalls because it
returns { quotient, remainder }, instead of just one value like the
other libcalls that we've seen so far. Therefore, we need to use custom
lowering for it. However, we don't want to have too much special code,
so we refactor the target-independent code in the legalizer by adding a
helper for replacing an instruction with a libcall. This helper is used
by the legalizer itself when dealing with simple calls, and also by the
custom ARM legalization for the more complicated AEABI divmod calls.
llvm-svn: 305459
Lowering mixed struct args, params and returns used G_INSERT, which is a
bit more convoluted to support through the entire pipeline. Since they
don't occur that often in practice, it's probably wiser to leave them
out until later.
Meanwhile, we can lower homogeneous structs using G_MERGE_VALUES, which
has good support in the legalizer. These occur e.g. as the return of
__aeabi_idivmod, so it's nice to be able to support them.
llvm-svn: 305458
Summary:
Scheduling AESE/AESMC and AESD/AESIMC instruction pairs back-to-back
gives a double digit speedup on benchmarks using those instructions on
Cortex-A processors. In GCC, this optimization is part of the generic
processor model as well.
This change should not have a major performance impact on processors
that do not optimize AES instruction pairs, although I only had access
to Cortex-A processors for benchmarking.
Reviewers: rengolin, kristof.beyls, javed.absar, evandro, silviu.baranga, MatzeB, mcrosier, joelkevinjones, joel_k_jones, bmakam, t.p.northover
Reviewed By: evandro
Subscribers: sbaranga, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D33836
llvm-svn: 305457
Author: milena.vujosevic.janicic
Reviewers: sdardis
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
ADDIU instruction is transformed into 16-bit instruction ADDIUSP
ADDIU instruction is transformed into 16-bit instruction ADDIUR1SP
Differential Revision: https://reviews.llvm.org/D33887
llvm-svn: 305455
This way we end up not looking at PHI args already removed.
MemSSA now goes through the updater so we can prune
it to avoid having redundant MemoryPHI arguments, but that
doesn't quite work for the general case.
Discussed with Daniel Berlin, fixes PR33406.
llvm-svn: 305409
There's an early out that's trying to detect when we don't know any bits that make up the legal range of a shift. The code subtracts one from BitWidth which creates a mask in the lower bits for power of 2 bit widths. This is then ANDed with the known bits to see if any of those bits are known. If the bit width isn't a power of 2 this creates a non-sensical mask.
This patch corrects this by rounding up to a power of 2 before doing the subtract and mask.
Differential Revision: https://reviews.llvm.org/D34165
llvm-svn: 305400
This reverts commit 3a204faa093c681a1e96c5e0622f50649b761ee0.
I've upset a buildbot which runs the address sanitizer:
ERROR: AddressSanitizer: stack-use-after-scope
lib/Target/ARM/ARMISelLowering.cpp:2690
That Twine variable is used illegally.
llvm-svn: 305390
For multiprecision arithmetic on MIPS, rather than using ISD::ADDE / ISD::ADDC,
get SelectionDAG to break down the operation into ISD::ADDs and ISD::SETCCs.
For MIPS, only the DSP ASE has a carry flag, so in the general case it is not
useful to directly support ISD::{ADDE, ADDC, SUBE, SUBC} nodes.
Also improve the generation code in such cases for targets with
TargetLoweringBase::ZeroOrOneBooleanContent by directly using the result of the
comparison node rather than using it in selects. Similarly for ISD::SUBE /
ISD::SUBC.
Address optimization breakage by moving the generation of MIPS specific integer
multiply-accumulate nodes to before legalization.
This revolves PR32713 and PR33424.
Thanks to Simonas Kazlauskas and Pirama Arumuga Nainar for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33494
llvm-svn: 305389
The ARM backend asserts against constant pool lowering when it generates
execute-only code in order to prevent the generation of constant pools in
the text section. It appears that target independent optimizations might
generate DAG nodes that represent constant pools. By lowering such nodes
as global addresses we don't violate the semantics of execute-only code
and also it is guaranteed that execute-only behaves correct with the
position-independent addressing modes that support execute-only code.
Differential Revision: https://reviews.llvm.org/D33773
llvm-svn: 305387
Summary:
This patch is part of 3 patches that together form a single patch, but must be introduced in stages in order not to break things.
The way that LLVM interprets DW_OP_plus in DIExpression nodes is basically that of the DW_OP_plus_uconst operator since LLVM expects an unsigned constant operand. This unnecessarily restricts the DW_OP_plus operator, preventing it from being used to describe the evaluation of runtime values on the expression stack. These patches try to align the semantics of DW_OP_plus and DW_OP_minus with that of the DWARF definition, which pops two elements off the expression stack, performs the operation and pushes the result back on the stack.
This is done in three stages:
• The first patch (LLVM) adds support for DW_OP_plus_uconst.
• The second patch (Clang) contains changes all its uses from DW_OP_plus to DW_OP_plus_uconst.
• The third patch (LLVM) changes the semantics of DW_OP_plus and DW_OP_minus to be in line with its DWARF meaning. This patch includes the bitcode upgrade from legacy DIExpressions.
Patch by Sander de Smalen.
Reviewers: echristo, pcc, aprantl
Reviewed By: aprantl
Subscribers: fhahn, javed.absar, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D33894
llvm-svn: 305386
This patch fixes two systemic machine verifier errors in the long
branch pass. The first is the incorrect basic block successors
and the second was the incorrect construction of several jump
instructions.
This partially resolves PR27458 and the associated PR32146.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33378
llvm-svn: 305382
This patch adds code which verifies that each bucket in the .apple_names
accelerator table is either empty or has a valid hash index.
Differential Revision: https://reviews.llvm.org/D34177
llvm-svn: 305344
Summary:
When legalizing G_LOAD/G_STORE using NarrowScalar, we should avoid emitting
%0 = G_CONSTANT ty 0
%1 = G_GEP %x, %0
since it's cheaper to not emit the redundant instructions than it is to fold them
away later.
Reviewers: qcolombet, t.p.northover, ab, rovka, aditya_nandakumar, kristof.beyls
Reviewed By: qcolombet
Subscribers: javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32746
llvm-svn: 305340
InstCombine has an optimization that recognizes an and with the sign bit of legal type size and turns it into a truncate and compare that checks the sign bit. But the select handling code doesn't recognize this idiom.
llvm-svn: 305338
Doing so breaks compilation of the following C program
(under -fprofile-instr-generate):
__attribute__((always_inline)) inline int foo() { return 0; }
int main() { return foo(); }
At link time, we fail because taking the address of an
available_externally function creates an undefined external reference,
which the TU cannot provide.
Emitting the function definition into the object file at all appears to
be a violation of the langref: "Globals with 'available_externally'
linkage are never emitted into the object file corresponding to the LLVM
module."
Differential Revision: https://reviews.llvm.org/D34134
llvm-svn: 305327
Summary:
Leave an updated VP metadata on the fallback memcpy intrinsic after
specialization. This can be used for later possible expansion based on
the average of the remaining values.
Reviewers: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34164
llvm-svn: 305321
These tests fail on powerpc64 BE (only, not LE) and are thus intefering with
the running of 3 of the powerpc buildbots. The author of the tests has been
notified and is working on fixing them but in the meantime I am disabling
them to get the bots working again.
See https://bugs.llvm.org//show_bug.cgi?id=33429
llvm-svn: 305317
Summary: Added output to stderr so that we can actually see what is happening when the test fails on big endian.
Reviewers: zturner
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D34155
llvm-svn: 305314
Store-immediate instructions have a non-extendable offset. Since the
actual offset for a stack object is not known until much later, only
generate these stores when the stack size (at the time of instruction
selection) is small.
llvm-svn: 305305
Summary:
This patch is part of 3 patches that together form a single patch, but must be introduced in stages in order not to break things.
The way that LLVM interprets DW_OP_plus in DIExpression nodes is basically that of the DW_OP_plus_uconst operator since LLVM expects an unsigned constant operand. This unnecessarily restricts the DW_OP_plus operator, preventing it from being used to describe the evaluation of runtime values on the expression stack. These patches try to align the semantics of DW_OP_plus and DW_OP_minus with that of the DWARF definition, which pops two elements off the expression stack, performs the operation and pushes the result back on the stack.
This is done in three stages:
• The first patch (LLVM) adds support for DW_OP_plus_uconst.
• The second patch (Clang) contains changes all its uses from DW_OP_plus to DW_OP_plus_uconst.
• The third patch (LLVM) changes the semantics of DW_OP_plus and DW_OP_minus to be in line with its DWARF meaning. This patch includes the bitcode upgrade from legacy DIExpressions.
Patch by Sander de Smalen.
Reviewers: pcc, echristo, aprantl
Reviewed By: aprantl
Subscribers: fhahn, aprantl, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33892
llvm-svn: 305304
When a mux instruction is created from a pair of complementary conditional
transfers, it can be placed at the location of either the earlier or the
later of the transfers. Since it will use the operands of the original
transfers, putting it in the earlier location may hoist a kill of a source
register that was originally further down. Make sure the kill flag is
removed if the register is still used afterwards.
llvm-svn: 305300
While simplifying branches in the MachineInstr representation, the
routine BuildCondBr must preserve flags on register MachineOperands. In
particular, it must preserve the <undef> flag.
This fixes a bug that is unlikely to occur in any real scenario, but
which bugpoint is likely to introduce.
Patch By Nick Johnson!
Reviewers: ahatanak, sdardis
Differential Revision: https://reviews.llvm.org/D34041
llvm-svn: 305290
The VFNM[AS] instructions did not have scheduling information attached, which
was causing assertion failures with the Cortex-A57 scheduling model and
-fp-contract=fast, because the Cortex-A57 sched model claims to be complete.
Differential Revision: https://reviews.llvm.org/D34139
llvm-svn: 305288
These symbols were previously not being marked as functions
so were appearing as globals instead, and with the incorrect
relocation type.
Without this fix, objects that take address of external
functions include them as global imports rather than function
imports which then fails at link time.
Differential Revision: https://reviews.llvm.org/D34068
llvm-svn: 305263
Summary: Added test cases for multiple machine types, file merging, multiple languages, and more resource types. Also fixed new bugs these tests exposed.
Subscribers: javed.absar, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D34047
llvm-svn: 305258
I accidentally combined this patch with one for adding more tests, they
should be separated.
This reverts commit 3da218a523be78df32e637d3446ecf97c9ea0465.
llvm-svn: 305257
Previously we were writing the value function index space
value but for these types of relocations we want to be
writing the table element index space value.
Add a test case for these relocation types that fails
without this change.
Differential Revision: https://reviews.llvm.org/D33962
llvm-svn: 305253
When we get an unknown symbol type, we might as well at least
dump it. Same goes for round-tripping through YAML, we can
dump the record contents as raw bytes even if we don't know
how to interpret it semantically.
llvm-svn: 305248
This fixes PR33157.
https://bugs.llvm.org//show_bug.cgi?id=33157
We might also think about disallowing duplicate dbg.declare intrinsics
entirely, but this may complicate some passes needlessly.
llvm-svn: 305244
Older PDBs don't have this. Its presence is detected by using
the various "feature" flags that come at the end of the PDB
Stream. Detect this, and don't try to dump the ID stream if the
features tells us it's not present.
llvm-svn: 305235
Summary:
After RS4GC, we should drop metadata that is no longer valid. These metadata
is used by optimizations scheduled after RS4GC, and can cause a miscompile.
One such metadata is invariant.load which is used by LICM sinking transform.
After rewriting statepoints, the address of a load maybe relocated. With
invariant.load metadata on a load instruction, LICM sinking assumes the
loaded value (from a dererenceable address) to be invariant, and
rematerializes the load operand and the load at the exit block.
This transforms the IR to have an unrelocated use of the
address after a statepoint, which is incorrect.
Other metadata we conservatively remove are related to
dereferenceability and noalias metadata.
This patch drops such metadata on store and load instructions after
rewriting statepoints.
Reviewers: reames, sanjoy, apilipenko
Reviewed by: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33756
llvm-svn: 305234
The "Add/sub (shifted reg)" instructions use the 31 encoding for xzr and wzr
rather than the SP, so we need to use different variants.
Situations where this actually comes up are rare enough (see test-case) that I
think falling back to DAG is fine.
llvm-svn: 305230
Summary:
Use the filepath used to open the archive member as the archive member
name instead of the file basename. This path might be absolute or
relative. This is important because the archive member name will show
up in the PDB, and we want our PDBs to look as much like MSVC's as
possible.
This also helps avoid an issue in our PDB module descriptor writing
code, which assumes that all module names are unique. Relative paths
still aren't guaranteed to be unique, but they're much better than
basenames, which definitely aren't unique.
Reviewers: ruiu, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33575
llvm-svn: 305223
Power9 has instructions that will reverse the bytes within an element for all
sizes (half-word, word, double-word and quad-word). These can be used for the
vec_revb builtins in altivec.h. However, we implement these to match vector
shuffle nodes as that will cover both the builtins and vector shuffles that
occur in the SDAG through other means.
Differential Revision: https://reviews.llvm.org/D33690
llvm-svn: 305214
Note that if we need the result of both the divide and the modulo then we
compute the modulo based on the result of the divide and not using the new
hardware instruction.
Commit on behalf of STEFAN PINTILIE.
Differential Revision: https://reviews.llvm.org/D33940
llvm-svn: 305210
The dream of a unified check-line auto-generator for all phases of compilation is dead.
The llc script has already diverged to be better at its goal, so having 2 scripts that
do almost the same thing is just causing confusion.
We can rip out the llc ability in update_test_checks.py next and rename it, so it will
be clear that we have one script for llc check auto-generation and another for opt.
llvm-svn: 305206
Summary:
This change enables the sin(x) cos(x) -> sincos(x) optimization on GNU
target triples. This optimization was being inhibited when -ffast-math
wasn't set because sincos in GLibC does not set errno, while sin and cos
do. However, this optimization will only run if the attributes on the
sin/cos calls include readnone, which is how clang represents the fact
that it doesn't care about the errno values set by these functions (via
the -fno-math-errno flag).
Reviewers: hfinkel, bogner
Subscribers: mcrosier, javed.absar, llvm-commits, paul.redmond
Differential Revision: https://reviews.llvm.org/D32921
llvm-svn: 305204
The dream of a unified check-line auto-generator for all phases of compilation is dead.
The llc script has already diverged to be better at its goal, so having 2 scripts that
do almost the same thing is just causing confusion for newcomers. I plan to fix up more
x86 tests in a next commit. We can rip out the llc ability in update_test_checks.py after
that.
llvm-svn: 305202
Summary:
The old check for slot overlap treated 2 slots `S` and `T` as
overlapping if there existed a CFG node in which both of the slots could
possibly be active. That is overly conservative and caused stack blowups
in Rust programs. Instead, check whether there is a single CFG node in
which both of the slots are possibly active *together*.
Fixes PR32488.
Patch by Ariel Ben-Yehuda <ariel.byd@gmail.com>
Reviewers: thanm, nagisa, llvm-commits, efriedma, rnk
Reviewed By: thanm
Subscribers: dotdash
Differential Revision: https://reviews.llvm.org/D31583
llvm-svn: 305193
I was looking closer at the x86 test diffs in D33866, and the first change seems like it
shouldn't happen in the first place. So this patch will resolve that.
Using Agner's tables and AMD docs, vperm2f128 and vinsertf128 have identical timing for
any given CPU model, so we should be able to interchange those without affecting perf.
But as we can see in some of the diffs here, using vperm2f128 allows load folding, so
we should take that opportunity to reduce code size and register pressure.
A secondary advantage is making AVX1 and AVX2 codegen more similar. Given that vperm2f128
was introduced with AVX1, we should be selecting it in all of the same situations that we
would with AVX2. If there's some reason that an AVX1 CPU would not want to use this
instruction, that should be fixed up in a later pass.
Differential Revision: https://reviews.llvm.org/D33938
llvm-svn: 305171
Wolfgang Pieb