Commit Graph

18 Commits

Author SHA1 Message Date
Chris Dewhurst 68388a0a99 [Sparc] Add Soft Float support
This change adds support for software floating point operations for Sparc targets.

This is the first in a set of patches to enable software floating point on Sparc. The next patch will enable the option to be used with Clang.

Differential Revision: http://reviews.llvm.org/D19265

llvm-svn: 269892
2016-05-18 09:14:13 +00:00
James Y Knight 1f3e6af7d0 [SPARC] Switch to the Machine Scheduler.
The (mostly-deprecated) SelectionDAG-based ILPListDAGScheduler scheduler
was making poor scheduling decisions, causing high register pressure and
extraneous register spills.

Switching to the newer machine scheduler generates better code -- even
without there being a machine model defined for SPARC yet.

(Actually committing the test changes too, this time, unlike r247315)

llvm-svn: 247343
2015-09-10 21:49:06 +00:00
David Blaikie 23af64846f [opaque pointer type] Add textual IR support for explicit type parameter to the call instruction
See r230786 and r230794 for similar changes to gep and load
respectively.

Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.

When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.

This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.

This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).

No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.

This leaves /only/ the varargs case where the explicit type is required.

Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.

About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.

import fileinput
import sys
import re

pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")

def conv(match, line):
  if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
    return line
  return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]

for line in sys.stdin:
  sys.stdout.write(conv(re.search(pat, line), line))

llvm-svn: 235145
2015-04-16 23:24:18 +00:00
David Blaikie a79ac14fa6 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

llvm-svn: 230794
2015-02-27 21:17:42 +00:00
David Blaikie 79e6c74981 [opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.

This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.

* This doesn't modify gep operators, only instructions (operators will be
  handled separately)

* Textual IR changes only. Bitcode (including upgrade) and changing the
  in-memory representation will be in separate changes.

* geps of vectors are transformed as:
    getelementptr <4 x float*> %x, ...
  ->getelementptr float, <4 x float*> %x, ...
  Then, once the opaque pointer type is introduced, this will ultimately look
  like:
    getelementptr float, <4 x ptr> %x
  with the unambiguous interpretation that it is a vector of pointers to float.

* address spaces remain on the pointer, not the type:
    getelementptr float addrspace(1)* %x
  ->getelementptr float, float addrspace(1)* %x
  Then, eventually:
    getelementptr float, ptr addrspace(1) %x

Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.

update.py:
import fileinput
import sys
import re

ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile(       r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")

def conv(match, line):
  if not match:
    return line
  line = match.groups()[0]
  if len(match.groups()[5]) == 0:
    line += match.groups()[2]
  line += match.groups()[3]
  line += ", "
  line += match.groups()[1]
  line += "\n"
  return line

for line in sys.stdin:
  if line.find("getelementptr ") == line.find("getelementptr inbounds"):
    if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
      line = conv(re.match(ibrep, line), line)
  elif line.find("getelementptr ") != line.find("getelementptr ("):
    line = conv(re.match(normrep, line), line)
  sys.stdout.write(line)

apply.sh:
for name in "$@"
do
  python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
  rm -f "$name.tmp"
done

The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh

After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).

The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7636

llvm-svn: 230786
2015-02-27 19:29:02 +00:00
Tim Northover 5896b066e6 TableGen: fix operand counting for aliases
TableGen has a fairly dubious heuristic to decide whether an alias should be
printed: does the alias have lest operands than the real instruction. This is
bad enough (particularly with no way to override it), but it should at least be
calculated consistently for both strings.

This patch implements that logic: first get the *correct* string for the
variant, in the same way as the Matcher, without guessing; then count the
number of whitespace chars.

There are basically 4 changes this brings about after the previous
commits; all of these appear to be good, so I have changed the tests:

+ ARM64: we print "neg X, Y" instead of "sub X, xzr, Y".
+ ARM64: we skip implicit "uxtx" and "uxtw" modifiers.
+ Sparc: we print "mov A, B" instead of "or %g0, A, B".
+ Sparc: we print "fcmpX A, B" instead of "fcmpX %fcc0, A, B"

llvm-svn: 208969
2014-05-16 09:42:04 +00:00
Jakob Stoklund Olesen e7084a1c5c The SPARCv9 ABI returns a float in %f0.
This is different from the argument passing convention which puts the
first float argument in %f1.

With this patch, all returned floats are treated as if the 'inreg' flag
were set. This means multiple float return values get packed in %f0,
%f1, %f2, ...

Note that when returning a struct in registers, clang will set the
'inreg' flag on the return value, so that behavior is unchanged. This
also happens when returning a float _Complex.

llvm-svn: 199028
2014-01-12 04:13:17 +00:00
Venkatraman Govindaraju 5ac9c8faec [SparcV9] For codegen generated library calls that return float, set inreg flag manually in LowerCall().
This makes the sparc backend to generate Sparc64 ABI compliant code.

llvm-svn: 198149
2013-12-29 04:27:21 +00:00
Venkatraman Govindaraju 0776cc0acd [SparcV9]: Implement lowering of long double (fp128) arguments in Sparc64 ABI.
Also, pass fp128 arguments to varargs through integer registers if necessary.

llvm-svn: 198145
2013-12-29 01:20:36 +00:00
Venkatraman Govindaraju 1116868a0d [Sparc] Emit large negative adjustments to SP/FP with sethi+xor instead of sethi+or. This generates correct code for both sparc32 and sparc64.
llvm-svn: 195576
2013-11-24 20:23:25 +00:00
Venkatraman Govindaraju f79528c132 [SparcV9]: Do not emit .register directives for global registers that are clobbered by calls but not used in the function itself.
llvm-svn: 195574
2013-11-24 18:41:49 +00:00
Venkatraman Govindaraju e9ef51222b [Sparc] Emit .register directive to declare the use of global registers %g2, %g4, %g6 and %g7.
llvm-svn: 191158
2013-09-22 00:42:30 +00:00
Venkatraman Govindaraju 3e8c7d98be Sparc: Perform leaf procedure optimization by default
llvm-svn: 183083
2013-06-02 02:24:27 +00:00
Jakob Stoklund Olesen 2cfe46fd34 Compute correct frame sizes for SPARC v9 64-bit frames.
The save area is twice as big and there is no struct return slot. The
stack pointer is always 16-byte aligned (after adding the bias).

Also eliminate the stack adjustment instructions around calls when the
function has a reserved stack frame.

llvm-svn: 179083
2013-04-09 04:37:47 +00:00
Jakob Stoklund Olesen a30f4832c9 Implement LowerCall_64 for the SPARC v9 64-bit ABI.
There is still no support for byval arguments (which I don't think are
needed) and varargs.

llvm-svn: 178993
2013-04-07 19:10:57 +00:00
Jakob Stoklund Olesen edaf66b056 Implement LowerReturn_64 for SPARC v9.
Integer return values are sign or zero extended by the callee, and
structs up to 32 bytes in size can be returned in registers.

The CC_Sparc64 CallingConv definition is shared between
LowerFormalArguments_64 and LowerReturn_64. Function arguments and
return values are passed in the same registers.

The inreg flag is also used for return values. This is required to handle
C functions returning structs containing floats and ints:

  struct ifp {
    int i;
    float f;
  };

  struct ifp f(void);

LLVM IR:

  define inreg { i32, float } @f() {
     ...
     ret { i32, float } %retval
  }

The ABI requires that %retval.i is returned in the high bits of %i0
while %retval.f goes in %f1.

Without the inreg return value attribute, %retval.i would go in %i0 and
%retval.f would go in %f3 which is a more efficient way of returning
%multiple values, but it is not ABI compliant for returning C structs.

llvm-svn: 178966
2013-04-06 23:57:33 +00:00
Jakob Stoklund Olesen 03d9f7fda6 SPARC v9 stack pointer bias.
64-bit SPARC v9 processes use biased stack and frame pointers, so the
current function's stack frame is located at %sp+BIAS .. %fp+BIAS where
BIAS = 2047.

This makes more local variables directly accessible via [%fp+simm13]
addressing.

llvm-svn: 178965
2013-04-06 21:38:57 +00:00
Jakob Stoklund Olesen 1c9a95ab2a Complete formal arguments for the SPARC v9 64-bit ABI.
All arguments are formally assigned to stack positions and then promoted
to floating point and integer registers. Since there are more floating
point registers than integer registers, this can cause situations where
floating point arguments are assigned to registers after integer
arguments that where assigned to the stack.

Use the inreg flag to indicate 32-bit fragments of structs containing
both float and int members.

The three-way shadowing between stack, integer, and floating point
registers requires custom argument lowering. The good news is that
return values are passed in the exact same way, and we can share the
code.

Still missing:

 - Update LowerReturn to handle structs returned in registers.
 - LowerCall.
 - Variadic functions.

llvm-svn: 178958
2013-04-06 18:32:12 +00:00