This patch adds support for:
S_EXPORT
LF_BITFIELD
With this patch, I have run through a couple of gigabytes of PDB
files and cannot find a type or symbol that we do not understand.
llvm-svn: 270637
This adds support for parsing and dumping the following
symbol types:
S_LPROCREF
S_ENVBLOCK
S_COMPILE2
S_REGISTER
S_COFFGROUP
S_SECTION
S_THUNK32
S_TRAMPOLINE
As of this patch, the test PDB files no longer have any unknown
symbol types.
llvm-svn: 270628
When dumping huge PDB files, too many of the options were grouped
together so you would get neverending spew of output. This patch
introduces more granular display options so you can only dump the
fields you actually care about.
llvm-svn: 270607
This makes use of the newly introduced `CVSymbolVisitor` to dump details
of each type of symbol record in the symbol streams. Future patches will
bring this visitor based dumping to the publics stream, as well as
creating a `SymbolDumpDelegate` to print more information about
relocations etc.
Differential Revision: http://reviews.llvm.org/D20545
Reviewed By: ruiu
llvm-svn: 270585
Fix was:
1) Had to regenerate dwarfdump-test-zlib.elf-x86-64, dwarfdump-test-zlib-gnu.elf-x86-64
(because llvm-symbolizer-zlib.test uses that inputs for its purposes and failed).
2) Updated llvm-symbolizer-zlib.test (updated used call function address to match new files +
added one more check for newly created dwarfdump-test-zlib-gnu.elf-x86-64 binary input).
3) Updated comment in dwarfdump-test-zlib.cc.
Original commit message:
[llvm-dwarfdump] - Teach dwarfdump to decompress debug sections in zlib style.
Before this llvm-dwarfdump only recognized zlib-gnu compression style of headers,
this patch adds support for zlib style.
It looks reasonable to support both styles for dumping,
even if we are not going to suport generating of deprecated gnu one.
Differential revision: http://reviews.llvm.org/D20470
llvm-svn: 270557
fix: forgot to commit the updated dwarfdump-test-zlib.elf-x86-64
Original commit message:
[llvm-dwarfdump] - Teach dwarfdump to decompress debug sections in zlib style.
Before this llvm-dwarfdump only recognized zlib-gnu compression style of headers,
this patch adds support for zlib style.
It looks reasonable to support both styles for dumping,
even if we are not going to suport generating of deprecated gnu one.
Differential revision: http://reviews.llvm.org/D20470
llvm-svn: 270543
Before this llvm-dwarfdump only recognized zlib-gnu compression style of headers,
this patch adds support for zlib style.
It looks reasonable to support both styles for dumping,
even if we are not going to suport generating of deprecated gnu one.
Differential revision: http://reviews.llvm.org/D20470
llvm-svn: 270540
DBI stream contains a stream number of the symbol record stream.
Symbol record streams is an array of length-type-value members.
Each member represents one symbol.
Publics stream contains offsets to the symbol record stream.
This patch is to print out all symbols that are referenced by
the publics stream.
Note that even with this patch, llvm-pdbdump cannot dump all the
information in a publics stream since it contains more information
than symbol names. I'll improve it in followup patches.
Differential Revision: http://reviews.llvm.org/D20480
llvm-svn: 270262
I don't yet fully understand the meaning of these data strcutures,
but at least it seems that their sizes and types are correct.
With this change, we can read publics streams till end.
Differential Revision: http://reviews.llvm.org/D20343
llvm-svn: 269861
This just checks that we emit all type records once, and then after
merging the type stream with no other type streams, we still emit every
kind of type record.
We could test the dumper output more closely, but that would make the
test very brittle. Currently we're just getting coverage.
llvm-svn: 269778
Summary:
This code is intended to be used as part of LLD's PDB writing. Until
that exists, this is exposed via llvm-readobj for testing purposes.
Type stream merging uses the following algorithm:
- Begin with a new empty stream, and a new empty hash table that maps
from type record contents to new type index.
- For each new type stream, maintain a map from source type index to
destination type index.
- For each record, copy it and rewrite its type indices to be valid in
the destination type stream.
- If the new type record is not already present in the destination
stream hash table, append it to the destination type stream, assign it
the next type index, and update the two hash tables.
- If the type record already exists in the destination stream, discard
it and update the type index map to forward the source type index to
the existing destination type index.
Reviewers: zturner, ruiu
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20122
llvm-svn: 269521
Publics stream seems to contain information as to public symbols.
It actually contains a serialized hash table along with fixed-sized
headers. This patch is not complete. It scans only till the end of
the stream and dump the header information. I'll write code to
de-serialize the hash table later.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20256
llvm-svn: 269484
Summary: This way we can get rid of one of the fields in the .def file.
Reviewers: llvm-commits
Subscribers: zturner
Differential Revision: http://reviews.llvm.org/D20251
llvm-svn: 269461
This merges the functionality of the macros in `CVLeafTypes.def` and the
macros in `TypeRecords.def` into a single set of macros.
Differential Revision: http://reviews.llvm.org/D20190
Reviewed By: rnk, amccarth
llvm-svn: 269316
This introduces a variadic template and some helper macros to
safely and correctly deserialize many types of common record
fields while maintaining error checking.
Differential Revision: http://reviews.llvm.org/D20183
Reviewed By: rnk, amccarth
llvm-svn: 269315
This reuses the CVTypeDumper from libcodeview to dump full
information about type records within a PDB file.
Differential Revision: http://reviews.llvm.org/D20022
Reviewed By: rnk
llvm-svn: 268808
Summary:
Port the dumper in llvm-readobj over to it.
I'm planning to use this visitor to power type stream merging.
While we're at it, try to switch from StringRef to ArrayRef<uint8_t> in some
places.
Reviewers: zturner, amccarth
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19899
llvm-svn: 268535
Ability to parse codeview type streams is also needed by
DebugInfoPDB for parsing PDBs, so moving this into a library
gives us this option. Since DebugInfoPDB had already hand
rolled some code to do this, that code is now convereted over
to using this common abstraction.
Differential Revision: http://reviews.llvm.org/D19887
Reviewed By: dblaikie, amccarth
llvm-svn: 268454
This parses the TPI stream (stream 2) from the PDB file. This stream
contains some header information followed by a series of codeview records.
There is some additional complexity here in that alongside this stream of
codeview records is a serialized hash table in order to efficiently query
the types. We parse the necessary bookkeeping information to allow us to
reconstruct the hash table, but we do not actually construct it yet as
there are still a few things that need to be understood first.
Differential Revision: http://reviews.llvm.org/D19840
Reviewed By: ruiu, rnk
llvm-svn: 268343
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
llvm-svn: 268298
PDB has a lot of similar data structures. We already have code
for parsing a Name Map, but PDB seems to have a different but
very similar structure that is a hash table. This is the
beginning of code needed in order to parse the name hash table,
but it is not yet complete. It parses the basic metadata of
the hash table, the bucket array, and the names buffer, but
doesn't use any of these fields yet as the data structure
requires a non-trivial amount of work to understand.
llvm-svn: 268268
There are probably hundreds of crashers we can find by fuzzing
more. For now we do the simplest possible validation of the
block size. Later, more complicated validations can verify that
other fields of the super block such as directory size, number
of blocks, agree with the size of the file etc.
llvm-svn: 268084
The motivation for this change is that PDB has the notion of
streams and substreams. Substreams often consist of variable
length structures that are convenient to be able to treat as
guaranteed, contiguous byte arrays, whereas the streams they
are contained in are not necessarily so, as a single stream
could be spread across many discontiguous blocks.
So, when processing data from a substream, we want to be able
to assume that we have a contiguous byte array so that we can
cast pointers to variable length arrays and such.
This leads to the question of how to be able to read the same
data structure from either a stream or a substream using the
same interface, which is where this patch comes in.
We separate out the stream's read state from the underlying
representation, and introduce a `StreamReader` class. Then
we change the name of `PDBStream` to `MappedBlockStream`, and
introduce a second kind of stream called a `ByteStream` which is
simply a sequence of contiguous bytes. Finally, we update all
of the std::vectors in `PDBDbiStream` to use `ByteStream` instead
as a proof of concept.
llvm-svn: 268071
Summary:
This is the follow-up patch for http://reviews.llvm.org/D19436
* Update the discriminator reading algorithm to match the assignment algorithm.
* Add test to cover the new algorithm.
Reviewers: dnovillo, echristo, dblaikie
Subscribers: danielcdh, dblaikie, echristo, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19522
llvm-svn: 267945
We now read out the rest of the substreams from the DBI streams. One of
these substreams, the FileInfo substream, contains information about which
source files contribute to each module (aka compiland). This patch
additionally parses out the file information from that substream, and
dumps it in llvm-pdbdump.
Differential Revision: http://reviews.llvm.org/D19634
Reviewed by: ruiu
llvm-svn: 267928
This gets more data out of the DBI strema of the PDB. In
particular it extracts the metadata for the list of modules
(compilands) that this PDB contains info about, and adds support
for dumping these fields to llvm-pdbdump.
Differential Revision: http://reviews.llvm.org/D19570
Reviewed By: ruiu
llvm-svn: 267818
Summary:
llvm-symbolizer wants to get linkage names of functions for historical
reasons. Linkage names are only recorded in the PDB for public symbols,
and the linkage name is apparently stored separately in some "public
symbol" record. We had a workaround in PDBContext which would look for
such symbols when the user requested linkage names.
However, when given an address that was truly in a private function and
public funciton, we would accidentally find nearby public symbols and
return those function names. The fix is to look for both function
symbols and public symbols and only prefer the public symbol name if the
addresses of the symbols agree.
Fixes PR27492
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19571
llvm-svn: 267732
The DBI stream contains a lot of bookkeeping information for other
streams. In particular it contains information about section contributions
and linked modules. This patch is a first attempt at parsing some of the
information out of the DBI stream. It currently only parses and dumps the
headers of the DBI stream, so none of the module data or section
contribution data is pulled out.
This is just a proof of concept that we understand the basic properties of
the DBI stream's metadata, and followup patches will try to extract more
detailed information out.
Differential Revision: http://reviews.llvm.org/D19500
Reviewed By: majnemer, ruiu
llvm-svn: 267585
The dwo_name was added to dwo files to improve diagnostics in dwp, but
it confuses tools that attempt to load any dwo named by a dwo_name, even
ones inside dwos. Avoid this by keeping track of whether a unit is
already a dwo unit, and if so, not loading further dwos.
llvm-svn: 267241
Rather than relying on the gmlt-like data emitted into the .o/executable
which only contains the simple name of any inlined functions, use the
.dwo file if present.
Test symbolication with/without a .dwo, and the old test that was
testing behavior when no gmlt-like data was present. (I haven't included
a test of non-gmlt-like data + no .dwo (that would be akin to
symbolication with no debug info) but we could add one for completeness)
The test was simplified a bit to be a little clearer (unoptimized, force
inline, using a function call as the inlined entity) and regenerated
with ToT clang. For the no-gmlt-like-data case, I modified Clang back to
its old behavior temporarily & the .dwo file is identical so it is
shared between the two executables.
llvm-svn: 267227
r267049 broke multiple buildbots (e.g. clang-cmake-mips, and clang-x86_64-linux-selfhost-modules) which the follow-ups have not yet resolved and this is preventing subsequent committers from being notified about additional failures on the affected buildbots.
llvm-svn: 267148
PDB parsing code was hand-rolled into llvm-pdbdump. This patch moves the
parsing of this code into DebugInfoPDB and makes the dumper use this.
This is achieved by implementing the skeleton of RawPdbSession, the
non-DIA counterpart to the existing PDB read interface. None of the type /
source file / etc information is accessible yet, so this implementation is
not yet close to achieving parity with the DIA counterpart, but the
RawSession class simply holds a reference to a PDBFile class which handles
parsing the file format. Additionally a PDBStream class is introduced
which allows accessing the bytes of a particular stream in a PDB file.
Differential Revision: http://reviews.llvm.org/D19343
Reviewed By: majnemer
llvm-svn: 267049
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
llvm-svn: 266919
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
1) We need to add this flag prior to adding any other, in case the user has
specified a -fmodule-cache-path= flag in their custom CXXFLAGS. Such a flag
causes -Werror builds to fail, and thus all config checks fail, until we add
the corresponding -fmodules flag. The modules selfhost bot does this, for
instance.
2) Delete module maps that were putting .cpp files into modules.
3) Enable -fmodules-local-submodule-visibility, to get proper module
visibility rules applied across submodules of the same module. Disable
-fmodules for C builds, since that flag is not available there.
llvm-svn: 266502
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
llvm-svn: 265606
This fixes various symbolization test failures for me when I build with a
hermetic VS2015 without having run the 2015 installer.
http://reviews.llvm.org/D18707
llvm-svn: 265193
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
llvm-svn: 264187
CIE augmentation data might contain non-printable characters.
The patch prints the data as a list of hex bytes.
Differential Revision: http://reviews.llvm.org/D17759
llvm-svn: 262361
Also implements the PDBSymbolCompilandEnv::getValue() method,
which until now had been unimplemented specifically because
variant did not support string values.
llvm-svn: 261173
Every symbol, no matter what it's tag is, supports the method
getSymIndexId(). However, this was being forwarded on every
concrete symbol type, so if someone had a PDBSymbol that they
didn't know what type it was (or simply didn't have an instance
of the concrete symbol type), they would not be able to get its
index id. This patch moves the method up to PDBSymbol, so that
no matter what type of object you have, you can always get its
id.
llvm-svn: 261153
The IDiaSymbol::getValue() method returns a variant. Until now,
I had never encountered a string value, so the Variant wrapper
did not support VT_BSTR. Now we have need to support string
values, so this patch just adds support for one extra type to
Variant.
llvm-svn: 261152
MCJIT emits zero-length CIE at the end of the _eh_frame section. This change
ensures that parser inside DebugInfo will not crash and correctly record such cases.
We are now recording DW_EH_PE_omit as a default value for FDE and LSDA encodings.
Also Offset != EndAugmentationOffset assertion check will only happen if augmentation
string had 'z' letter in it.
Differential Revision: http://reviews.llvm.org/D16588
llvm-svn: 258931
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
This rewrites and expands the existing codeview dumping functionality in
llvm-readobj using techniques similar to those in lib/Object. This defines a
number of new records and enums useful for reading memory mapped codeview
sections in COFF objects.
The dumper is intended as a testing tool for LLVM as it grows more codeview
output capabilities.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D16104
llvm-svn: 257658
Summary:
There are a number of files in the tree which have been accidentally checked in with DOS line endings. Convert these to native line endings.
There are also a few files which have DOS line endings on purpose, and I have set the svn:eol-style property to 'CRLF' on those.
Reviewers: joerg, aaron.ballman
Subscribers: aaron.ballman, sanjoy, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15848
llvm-svn: 256707
Summary: This diff is the initial implementation of the LLVM CodeView library. There is much more work to be done, namely a CodeView dumper and tests. This patch should help others make progress on the LLVM->CodeView debug info emission while I continue with the implementation of the dumper and tests.
This library implements support for emitting debug info in the CodeView format. This phase of the implementation only includes support for CodeView type records. Clients that need to emit type records will use a class derived from TypeTableBuilder. TypeTableBuilder provides member functions for writing each kind of type record; each of these functions eventually calls the writeRecord virtual function to emit the actual bits of the record. Derived classes override writeRecord to implement the folding of duplicate records and the actual emission to the appropriate destination. LLVMCodeView provides MemoryTypeTableBuilder, which creates the table in memory. In the future, other classes derived from TypeTableBuilder will write to other destinations, such as the type stream in a PDB.
The rest of the types in LLVMCodeView define the actual CodeView type records and all of the supporting enums and other types used in the type records. The TypeIndex class is of particular interest, because it is used by clients as a handle to a type in the type table.
The library provides a relatively low-level interface based on the actual on-disk format of CodeView. For example, type records refer to other type records by TypeIndex, rather than by an actual pointer to the referent record. This allows clients to emit type records one at a time, rather than having to keep the entire transitive closure of type records in memory until everything has been emitted. At some point, having a higher-level interface layered on top of this one may be useful for debuggers and other tools that want a more holistic view of the debug info. The lower-level interface should be sufficient for compilers and linkers to do the debug info manipulation that they need to do efficiently.
Reviewers: rnk, majnemer
Subscribers: silvas, rnk, jevinskie, llvm-commits
Differential Revision: http://reviews.llvm.org/D14961
llvm-svn: 256385
This code changes the way Symbolize handles parsed binaries: now
parsed OwningBinary<Binary> is not broken into (binary, memory buffer)
pair, and is just stored as-is in a cache. ObjectFile components
of Mach-O universal binaries are also stored explicitly in a
separate cache.
Additionally, this change:
* simplifies the code that parses/caches binaries: it's now done
in a single place, not three different functions.
* makes flush() method behave as expected, and actually clear
the cached parsed binaries and objects.
* fixes a dangling pointer issue described in
http://reviews.llvm.org/D15638
llvm-svn: 256041
LLVM MC has single methods which can handle the output of EH frame and DWARF CIE's and FDE's.
This code improves DWARFDebugFrame::parse to do the same for parsing.
This also allows llvm-objdump to support the --dwarf=frames option which objdump supports. This
option dumps the .eh_frame section using the new code in DWARFDebugFrame::parse.
http://reviews.llvm.org/D15535
Reviewed by Rafael Espindola.
llvm-svn: 256008
This is very rudimentary support for debug_cu_index, but it is enough to
allow llvm-dwarfdump to find the offsets for contributions and
correctly dump debug_info.
It will need to actually find the real signature of the unit and build
the real hash table with the right number of buckets, as per the DWP
specification.
It will also need to be expanded to cover the tu_index as well.
llvm-svn: 254489
This is a recommit of 252842 which was reverted in 252859. The issue was
using %s format specifier for a StringRef - used Format's
left_justify(StringRef, int) instead.
It'd be nice to have __attribute__((format(..))) on llvm::format, but
apparently it's only implemented for c-style variadics, not C++ variadic
templates. Perhaps we could fix that & conditionalize the attribute on
such...
llvm-svn: 253065
Summary:
PE files are stripped by default, and only contain the names of exported
symbols.
The actual reason that we bother to do this override by default is
actually due to a quirk of the way -gline-tables-only is implemented, so
I phrased the check as "if we are symbolizing from dwarf, do the symtab
override".
This fixes lots of Windows ASan tests that I broke in r250582.
Reviewers: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14594
llvm-svn: 253051
Added "macro" option to "-debug-dump" flag, which trigger parsing and dumping of the ".debug_macinfo" section.
Differential Revision: http://reviews.llvm.org/D14294
llvm-svn: 252866
Introduce DIPrinter which takes care of rendering DILineInfo and
friends. This allows LLVMSymbolizer class to return a structured data
instead of plain std::strings.
llvm-svn: 251989
Make printDILineInfo and friends responsible for just rendering the
contents of the structures, demangling should actually be performed
earlier, when we have the information about the originating
SymbolizableModule at hand.
llvm-svn: 251981
Introduce LLVMSymbolizer::symbolizeInlinedCode() instead of switching
on PrintInlining option passed to the constructor. This will be needed
once we retrun structured data (instead of std::string) from
LLVMSymbolizer and move printing logic out.
llvm-svn: 251675
Summary:
This is mostly NFC. It is a first step in cleaning up LLVMSymbolize
library. It removes "ModuleInfo" class which bundles together ObjectFile
and its debug info context in favor of:
* abstract SymbolizableModule in public headers;
* SymbolizableObjectFile subclass in implementation.
Additionally, SymbolizableObjectFile is now created via factory, so we
can properly detect object parsing error at this stage instead of keeping
the broken half-parsed object. As a next step, we would be able to
propagate the error all the way back to the library user.
Further improvements might include:
* factoring out the logic of finding appropriate file with debug info
for a given object file, and caching all parsed object files into a
separate class [A].
* factoring out DILineInfo rendering [B].
This would make what is now a heavyweight "LLVMSymbolizer" a relatively
straightforward class, that calls into [A] to turn filepath into a
SymbolizableModule, delegates actual symbolization to concrete SymbolizableModule
implementation, and lets [C] render the result.
Reviewers: dblaikie, echristo, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14099
llvm-svn: 251662
LLVMSymbolizer::Options is mostly used in LLVMSymbolizer class anyway.
Let's keep their usage restricted to that class, especially given that
it's worth to move ModuleInfo to a different header, independent from
the symbolizer class.
llvm-svn: 251363
Summary:
Previously the relative address flag only affected PDB debug info. Now
both DIContext implementations always expect to be passed virtual
addresses. llvm-symbolizer is now responsible for adding ImageBase to
module offsets when --relative-offset is passed.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12883
llvm-svn: 249784
Not only do we not need to do anything to read correct values from the
object files, but the current logic actually wrongly applies twice the
section base address when there is no LoadedObjectInfo passed to the
DWARFContext creation (as the added test shows).
Simply do not apply any relocations on the mach-o debug info if there is
no load offset to apply.
llvm-svn: 245807
When encountering a scattered relocation, the code would assert trying to
access an unexisting section. I couldn't find a way to expose the result
of the processing of a scattered reloc, and I'm really unsure what the
right thing to do is. This patch just skips them during the processing in
DwarfContext and adds a mach-o file to the tests that exposed the asserting
behavior.
(This is a new failure that is being exposed by Rafael's recent work on
the libObject interfaces. I think the wrong behavior has always happened,
but now it's asserting)
llvm-svn: 243778
If LLVMDebugInfoPDB links against the DIA SDK then the exports file
would contain an INTERFACE_LINK_LIBRARIES property that contained an
absolute path to ``diaguids.lib`` which used a native windows path (interpreted
as escape sequences when LLVMExports.cmake is imported causing
``find_package(LLVM)`` to fail) rather than the correct CMake style path.
llvm-svn: 240181
There are 3 types of relocations on MachO
* Scattered
* Section based
* Symbol based
On ELF and COFF relocations are symbol based.
We were in the strange situation that we abstracted over two of them. This makes
section based relocations MachO only.
llvm-svn: 240149
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
This fixes a bug in the line info handling in the dwarf code, based on a
problem I when implementing RelocVisitor support for MachO.
Since addr+size will give the first address past the end of the function,
we need to back up one line table entry. Fix this by looking up the
end_addr-1, which is the last address in the range. Note that this also
removes a duplicate output from the llvm-rtdyld line table dump. The
relevant line is the end_sequence one in the line table and has an offset
of the first address part the end of the range and hence should not be
included.
Also factor out the common functionality into a separate function.
This comes up on MachO much more than on ELF, since MachO
doesn't store the symbol size separately, hence making
said situation always occur.
Differential Revision: http://reviews.llvm.org/D9925
llvm-svn: 238699
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238602
This adds support for the 64-bit DWARF format, but is still limited to
less than 4GB of debug data by the DataExtractor class. Some versions
of the GNU MIPS toolchain generate 64-Bit DWARF even though it isn't
actually necessary.
Differential Revision: http://reviews.llvm.org/D1988
llvm-svn: 238434
Use clang-tidy to simplify boolean conditional return statements. Patch by
Richard Thomson <legalize@xmission.com>!
Differential Revision: http://reviews.llvm.org/D9972
llvm-svn: 238132
Summary:
This supersedes http://reviews.llvm.org/D4010, hopefully properly
dealing with the JIT case and also adds an actual test case.
DwarfContext was basically already usable for the JIT (and back when
we were overwriting ELF files it actually worked out of the box by
accident), but in order to resolve relocations correctly it needs
to know the load address of the section.
Rather than trying to get this out of the ObjectFile or requiring
the user to create a new ObjectFile just to get some debug info,
this adds the capability to pass in that info directly.
As part of this I separated out part of the LoadedObjectInfo struct
from RuntimeDyld, since it is now required at a higher layer.
Reviewers: lhames, echristo
Reviewed By: echristo
Subscribers: vtjnash, friss, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D6961
llvm-svn: 237961
DWARF standard claims that each compilation/type unit header in
.debug_info/.debug_types section must be followed by corresponding
compile/type unit DIE, possibly with its children. Two situations
are possible:
* compile/type unit DIE is missing because DWARF producer failed to
emit it.
* DWARF parser failed to parse unit DIE correctly, for instance if it
contains some unsupported attributes (see r237721, for instance).
In either of these cases, the library, and the tools that use it
(llvm-dwarfdump, llvm-symbolizer) should not crash. Insert appropriate
checks to protect against this.
llvm-svn: 237733
This change implements basic support for DWARF alternate sections
proposal: http://www.dwarfstd.org/ShowIssue.php?issue=120604.1&type=open
LLVM tools now understand new forms: DW_FORM_GNU_ref_alt and
DW_FORM_GNU_strp_alt, which are used as references to .debug_info and
.debug_str sections respectively, stored in a separate file, and
possibly shared between different executables / shared objects.
llvm-dwarfdump and llvm-symbolizer don't yet know how to access this
alternate debug file (usually pointed by .gnu_debugaltlink section),
but they can at lease properly parse and dump regular files, which
refer to it.
This change should fix crashes of llvm-dwarfdump and llvm-symbolizer on
files produced by running "dwz" tool. Such files are already installed
on some modern Linux distributions.
llvm-svn: 237721
The DWARF-4 specification added 2 new fields in the CIE header called
address_size and segment_size.
Create these 2 new fields when generating dwarf-4 CIE entries, print out
the new fields when dumping the CIE and update tests
Differential Revision: http://reviews.llvm.org/D9558
llvm-svn: 237145
Specifically, this patch correctly respects the -demangle option,
and additionally adds a hidden --relative-address option allows
input addresses to be relative to the module load address instead
of absolute addresses into the image.
llvm-svn: 236653
This patch adds the --load-address command line option to
llvm-pdbdump, which dumps all addresses assuming the module has
loaded at the specified address.
Additionally, this patch adds an option to llvm-pdbdump to support
dumping of public symbols (i.e. symbols with external linkage).
llvm-svn: 236342
This will enable us to create a PDBContext so as to expose some
amount of debug info functionality through a common interace.
Differential Revision: http://reviews.llvm.org/D9205
Reviewed by: Alexey Samsonov
llvm-svn: 235612
Previously DebugInfoPDB could only load data for a PDB given a
path to the PDB. It could not open an EXE and find the matching
PDB and verify it matched, etc. This patch adds support for that
so that we can simply load debug information for a PDB directly.
Additionally, this patch extends DebugInfoPDB to support getting
source and line information for symbols.
llvm-svn: 235237
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
llvm-svn: 234679
This will now display enum definitions both at the global
scope as well as nested inside of classes. Additionally,
it will no longer display enums at the global scope if the
enum is nested. Instead, it will omit the definition of
the enum globally and instead emit it in the corresponding
class definition.
llvm-svn: 231215
A short list of some of the improvements:
1) Now supports -all command line argument, which implies many
other command line arguments to simplify usage.
2) Now supports -no-compiler-generated command line argument to
exclude compiler generated types.
3) Prints base class list.
4) -class-definitions implies -types.
5) Proper display of bitfields.
6) Can now distinguish between struct/class/interface/union.
And a few other minor tweaks.
llvm-svn: 230933
Previously it was impossible to distinguish between "There is
no PDB implementation for this platform" and "I tried to load
the PDB, but couldn't find the file", making it hard to figure
out if you built llvm-pdbdump incorrectly or if you just mistyped
a file name.
This patch adds proper error handling so that we can know exactly
what went wrong.
llvm-svn: 230868
All of the cases were just appending from random access iterators to a
vector. Using insert/append can grow the vector to the perfect size
directly and moves the growing out of the loop. No intended functionalty
change.
llvm-svn: 230845
Function pointers were not correctly handled by the dumper, and
they would print as "* name". They now print as
"int (__cdecl *name)(int arg1, int arg2)" as they should.
Also, doubles were being printed as floats. This fixes that bug
as well, and adds tests for all builtin types. as well as a test
for function pointers.
llvm-svn: 230703
This is the first commit in a small series aiming at making
debug_frame dump more useful (right now it prints a list of
opeartions without their operands).
llvm-svn: 230547
This reverts commit r230062.
Debian stable (wheezy) ships still with cmake 2.8.9.
The commit broke my LLVM/Polly buildbot, to my knowledge our only Linux+cmake
buildbot.
llvm-svn: 230343
This adds the --class-definitions flag. If specified, when dumping
types, instead of "class Foo" you will see the full class definition,
with member functions, constructors, access specifiers.
NOTE: Using this option can be very slow, as generating a full class
definition requires accessing many different parts of the PDB.
llvm-svn: 230203
This increases the flexibility of how to dump different
symbol types -- necessary for context-sensitive formatting of
symbol types -- and also improves the modularity by allowing
the dumping to be implemented in the actual dumper, as opposed
to in the PDB library.
llvm-svn: 230184
This removes a wealth of options, and instead now only provides
three options. -symbols, -types, and -compilands. This greatly
simplifies use of the tool, and makes it easier to understand
what you're going to see when you run the tool.
llvm-svn: 230182
Dumping the global scope contains a lot of very uninteresting
things and is generally polluted with a lot of random junk.
Furthermore, it dumps values unsorted, making it hard to read.
This patch dumps known interesting types only, and as a side
effect sorts the list by symbol type.
llvm-svn: 229232
This correctly prints the function pointers, and also prints
function signatures for symbols as opposed to just types. So
actual functions in your program will now be printed with full
name and signature, as opposed to just name as before.
llvm-svn: 229129
In particular this patch adds the ability to dump complete
function signature information including argument types as
correctly formatted strings. A side effect of this is that
almost all symbol and meta types are now formatted.
llvm-svn: 229076
This patch adds a number of improvements to llvm-pdbdump.
1) Dumping of the entire global scope, and not only those
symbols that live in individual compilands.
2) Prepend class name to member functions and data
3) Improved display of bitfields.
4) Support for dumping more kinds of data symbols.
llvm-svn: 229012
Frequently you only want to iterate over children of a specific
type (e.g. functions). Previously you would get back a generic
interface that allowed iteration over the base symbol type,
which you would have to dyn_cast<> each one of. With this patch,
we allow the user to specify the concrete type as a template
parameter, and it will return an iterator which returns instances
of the concrete type directly.
llvm-svn: 228960
This allows IDEs to recognize the entire set of header files for
each of the core LLVM projects.
Differential Revision: http://reviews.llvm.org/D7526
Reviewed By: Chris Bieneman
llvm-svn: 228798
This makes llvm-pdbdump available on all platforms, although it
will currently fail to create a dumper if there is no PDB reader
implementation for the current platform.
It implements dumping of compilands and children, which is less
information than was previously available, but it has to be
rewritten from scratch using the new set of interfaces, so the
rest of the functionality will be added back in subsequent commits.
llvm-svn: 228755
This implements DebugInfoPDB when the DIA SDK is present on the system.
Specifically, this means that the following conditions are met:
1) You are building on Windows.
2) You are building with MSVC.
3) Visual Studio did not corrupt the installation of DIA due to a
known issue with side-by-side installations of VS2012 and VS2013.
If all of these conditions are true, you will be able to pass a value
of PDB_Reader::DIA to PDB::createPdbReader().
There are no tests for this yet, as any test will be in the form of a
lit test which tests the llvm-pdbdump.exe, which still needs to be
rewritten in terms of this library.
llvm-svn: 228747
Dumping a symbol often requires access to data that isn't inside
the symbol hierarchy, but which is only accessible through the
top-level session. This patch is a pure interface change to give
symbols a reference to the session.
llvm-svn: 228542
This patch implements a few of the optional suggestions from the
initial patch comitting libpdb. In particular, it implements a
virtual function out of line for each of the concrete classes.
A few other minor cleanups exist as well, such as using override
instead of virtual, etc.
llvm-svn: 228516
These were originally submitted as part of r228428, but this part
caused a build breakage in LLVMConfig. The library portion was
resubmitted independently since it was not causing breakage.
There were two reasons this was causing the build to fail. The
first is that there were no Makefiles added for the PDB tests. And
the second is that the DebugInfoPDB library was only being built by
CMake behind an "if (MSVC)" check. This is wrong since this the
library hides platform specific details, and it was causing
LLVM-Config to not find the library when trying to build unittests.
llvm-svn: 228482
This change resubmits the patch that broke the build, this time
without unittests. The unittests will be submitted separately
after the problem has been addressed:
--Original Commit Message--
Create lib/DebugInfo/PDB.
This patch creates a platform-independent interface to a PDB reader.
There is currently no implementation of this interface, which will
be provided in future patches. This defines the basic object model
which any implementation must conform to.
Reviewed by: David Blaikie
Differential Revision: http://reviews.llvm.org/D7356
llvm-svn: 228435
This patch creates a platform-independent interface to a PDB reader.
There is currently no implementation of this interface, which will
be provided in future patches. This defines the basic object model
which any implementation must conform to.
Reviewed by: David Blaikie
Differential Revision: http://reviews.llvm.org/D7356
llvm-svn: 228428
In preparation for adding PDB support to LLVM, this moves the
DWARF parsing code to its own subdirectory under DebugInfo, and
renames LLVMDebugInfo to LLVMDebugInfoDWARF.
This is purely a mechanical / build system change.
Differential Revision: http://reviews.llvm.org/D7269
Reviewed by: Eric Christopher
llvm-svn: 227586
utils/sort_includes.py.
I clearly haven't done this in a while, so more changed than usual. This
even uncovered a missing include from the InstrProf library that I've
added. No functionality changed here, just mechanical cleanup of the
include order.
llvm-svn: 225974
The color scheme is the same as the one used by the colorize dwarfdump
script on Darwin.
A new --color option can be used to forcibly turn color on or off.
http://reviews.llvm.org/D6852
llvm-svn: 225269
dsymutil needs access to DWARF specific inforamtion, the small DIContext
wrapper isn't sufficient. Other DWARF consumers might want to use it too
(I'm looking at you lldb).
Differential Revision: http://reviews.llvm.org/D6694
llvm-svn: 224594
Add in definedness checks for shift operators, null checks when
pointers are assumed by the code to be non-null, and explicit
unreachables.
llvm-svn: 224255
As dump() methods should be. To allow that, do not store the DWARFFormValue
objects used for the dump in the header data.
Per Alexey's suggestion!
llvm-svn: 222436
ELF targets (and maybe COFF) use relocations when referring
to strings in the .debug_str section. Handle that in the
accelerator table dumper. This commit restores the
test/DebugInfo/cross-cu-inlining.ll test to its expected
platform independant form, validating that the fix works
(this test failed on linux boxes).
llvm-svn: 222029
This reverts commit r221842 which was a revert of r221836 and of the
test parts of r221837.
This new version fixes an UB bug pointed out by David (along with
addressing some other review comments), makes some dumping more
resilient to broken input data and forces the accelerator tables
to be dumped in the tests where we use them (this decision is
platform specific otherwise).
llvm-svn: 222003
This reverts commit r221836.
The tests are asserting on some buildbots. This also reverts the
test part of r221837 as it relies on dwarfdump dumping the
accelerator tables.
llvm-svn: 221842
Currently FormValues are only used for attributes of DIEs and thus
uers always have a CU lying around when calling into the FormValue
API.
Accelerator tables encode their information using the same Forms
as the attributes, thus it is natural to use DWARFFormValue to
extract/dump them. There is no CU in that case though. Allow the
API to be called with a null CU arguemnt by making the RelocMap
lookup conditional on the CU pointer validity. And document this
new behvior in the header. (Test coverage for this use of the API
comes in the DwarfAccelTable support patch)
llvm-svn: 221835
Zachary Turner