Summary:
It does so using a simple nesting stack, and gives clear errors upon
violation. This is unique to wasm, since most CPUs do not have
any nested constructs.
Had to add an end of file check to the general assembler for this.
Note: if/else/end instructions are not currently supported in our
tablegen defs, so these tests will be enabled in a follow-up.
They already pass the nesting check.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55797
llvm-svn: 350078
Summary:
The "single parameter" .file directive appears to be an ELF-only feature
that is intended to insert the main source filename into the string
table table.
I noticed that if you assemble an ELF .s file for COFF, typically it
will assert right away on a .file directive near the top of the file. My
first change was to make this emit a proper error in the asm parser so
that we don't assert so easily.
However, COFF actually does have some support for this directive, and if
you emit an object file, llvm-mc does not assert. When emitting a COFF
object, MC will take those file names and create "debug" symbol table
entries for them. I'm not familiar with these kinds of symbol table
entries, and I'm not aware of any users of them, but @compnerd added
them a while ago. They don't introduce absolute paths, and most main
source file paths are short enough that this extra entry shouldn't cause
any problems, so I enabled the flag in MCAsmInfoCOFF that indicates that
it's supported.
This has the side effect of adding an extra debug symbol to every object
produced by clang, which is a pretty big functional change. My question
is, should we keep the functionality or remove it in the name of symbol
table minimalism?
Reviewers: mstorsjo, compnerd
Subscribers: hiraditya, compnerd, llvm-commits
Differential Revision: https://reviews.llvm.org/D55900
llvm-svn: 349976
- When signing return addresses with -msign-return-address=<scope>{+<key>},
either the A key instructions or the B key instructions can be used. To
correctly authenticate the return address, the unwinder/debugger must know
which key was used to sign the return address.
- When and exception is thrown or a break point reached, it may be necessary to
unwind the stack. To accomplish this, the unwinder/debugger must be able to
first authenticate an the return address if it has been signed.
- To enable this, the augmentation string of CIEs has been extended to allow
inclusion of a 'B' character. Functions that are signed using the B key
variant of the instructions should have and FDE whose associated CIE has a 'B'
in the augmentation string.
- One must also be able to preserve these semantics when first stepping from a
high level language into assembly and then, as a second step, into an object
file. To achieve this, I have introduced a new assembly directive
'.cfi_b_key_frame ', that tells the assembler the current frame uses return
address signing with the B key.
- This ensures that the FDE is associated with a CIE that has 'B' in the
augmentation string.
Differential Revision: https://reviews.llvm.org/D51798
llvm-svn: 349895
Summary:
Add PLATFORM constants for iOS, tvOS, and watchOS simulators, as well
as human readable names for these constants, to the Mach-O file format
header files.
rdar://46854119
Reviewers: ab, davide
Reviewed By: ab, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55905
llvm-svn: 349779
- Reapply changes intially introduced in r343089
- The archtecture info is no longer loaded whenever a DWARFContext is created
- The runtimes libraries (santiziers) make use of the dwarf context classes but
do not intialise the target info
- The architecture of the object can be obtained without loading the target info
- Adding a method to the dwarf context to get this information and multiplex the
string printing later on
Differential Revision: https://reviews.llvm.org/D55774
llvm-svn: 349472
The default still is dwarf, but SEH exceptions can now be enabled
optionally for the MinGW target.
Differential Revision: https://reviews.llvm.org/D55748
llvm-svn: 349451
This was a pre-existing bug that could be triggered with assembly like
this:
.p2align 2
.LtmpN:
.cv_def_range "..."
I noticed this when attempting to change clang to emit aligned symbol
records.
llvm-svn: 349403
build version load commands in the object file
This commit introduces a new metadata node called "SDK Version". It will be set
by the frontend to mark the platform SDK (macOS/iOS/etc) version which was used
during that particular compilation.
This node is used when machine code is emitted, by either saving the SDK version
into the appropriate macho load command (version min/build version), or by
emitting the assembly for these load commands with the SDK version specified as
well.
The assembly for both load commands is extended by allowing it to contain the
sdk_version X, Y [, Z] trailing directive to represent the SDK version
respectively.
rdar://45774000
Differential Revision: https://reviews.llvm.org/D55612
llvm-svn: 349119
Making the section writable doesn't affect how windows does
base relocs in case a DLL can't be loaded at the intended base
address.
This comment dates back to SVN r79346.
Differential Revision:
llvm-svn: 348178
This improves compatibility with GCC produced object files, where
the .eh_frame sections are read only. With mixed flags for the
involved .eh_frame sections, LLD creates two separate .eh_frame
sections in the output binary, one for each flag combination,
while ld.bfd probably merges them.
The previous setup of flags can be traced back to SVN r79346.
Differential Revision: https://reviews.llvm.org/D55209
llvm-svn: 348177
Currently, variadic operands on an MCInst are assumed to be uses,
because they come after the defs. However, this is not always the case,
for example the Arm/Thumb LDM instructions write to a variable number of
registers.
This adds a property of instruction definitions which can be used to
mark variadic operands as defs. This only affects MCInst, because
MachineInstruction already tracks use/def per operand in each instance
of the instruction, so can already represent this.
This property can then be checked in MCInstrDesc, allowing us to remove
some special cases in ARMAsmParser::isITBlockTerminator.
Differential revision: https://reviews.llvm.org/D54853
llvm-svn: 348114
In the Arm assembly parser, we first match an instruction, then call
processInstruction to possibly change it to a different encoding, to
match rules in the architecture manual which can't be expressed by the
table-generated matcher.
This adds debug printing so that this process is visible when using the
-debug option.
To support this, I've added a new overload of MCInst::dump_pretty which
takes the opcode name as a StringRef, since we don't have an InstPrinter
instance in the assembly parser. Instead, we can get the same
information directly from the MCInstrInfo.
Differential revision: https://reviews.llvm.org/D54852
llvm-svn: 348113
This patch adds BPF Debug Format (BTF) as a standalone
LLVM debuginfo. The BTF related sections are directly
generated from IR. The BTF debuginfo is generated
only when the compilation target is BPF.
What is BTF?
============
First, the BPF is a linux kernel virtual machine
and widely used for tracing, networking and security.
https://www.kernel.org/doc/Documentation/networking/filter.txthttps://cilium.readthedocs.io/en/v1.2/bpf/
BTF is the debug info format for BPF, introduced in the below
linux patch
69b693f0ae (diff-06fb1c8825f653d7e539058b72c83332)
in the patch set mentioned in the below lwn article.
https://lwn.net/Articles/752047/
The BTF format is specified in the above github commit.
In summary, its layout looks like
struct btf_header
type subsection (a list of types)
string subsection (a list of strings)
With such information, the kernel and the user space is able to
pretty print a particular bpf map key/value. One possible example below:
Withtout BTF:
key: [ 0x01, 0x01, 0x00, 0x00 ]
With BTF:
key: struct t { a : 1; b : 1; c : 0}
where struct is defined as
struct t { char a; char b; short c; };
How BTF is generated?
=====================
Currently, the BTF is generated through pahole.
https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=68645f7facc2eb69d0aeb2dd7d2f0cac0feb4d69
and available in pahole v1.12
https://git.kernel.org/pub/scm/devel/pahole/pahole.git/commit/?id=4a21c5c8db0fcd2a279d067ecfb731596de822d4
Basically, the bpf program needs to be compiled with -g with
dwarf sections generated. The pahole is enhanced such that
a .BTF section can be generated based on dwarf. This format
of the .BTF section matches the format expected by
the kernel, so a bpf loader can just take the .BTF section
and load it into the kernel.
8a138aed4a
The .BTF section layout is also specified in this patch:
with file include/llvm/BinaryFormat/BTF.h.
What use cases this patch tries to address?
===========================================
Currently, only the bpf instruction stream is required to
pass to the kernel. The kernel verifies it, jits it if configured
to do so, attaches it to a particular kernel attachment point,
and later executes when a particular event happens.
This patch tries to expand BTF to support two more use cases below:
(1). BPF supports subroutine calls.
During performance analysis, it would be good to
differentiate which call is hot instead of just
providing a virtual address. This would require to
pass a unique identifier for each subroutine to
the kernel, the subroutine name is a natual choice.
(2). If a particular jitted instruction is hot, we want
user to know which source line this jitted instruction
belongs to. This would require the source information
is available to various profiling tools.
Note that in a single ELF file,
. there may be multiple loadable bpf programs,
. for a particular to-be-loaded bpf instruction stream,
its instructions may come from multiple PROGBITS sections,
the bpf loader needs to merge them together to a single
consecutive insn stream before loading to the kernel.
For example:
section .text: subroutines funcFoo
section _progA: calling funcFoo
section _progB: calling funcFoo
The bpf loader could construct two loadable bpf instruction
streams and load them into the kernel:
. _progA funcFoo
. _progB funcFoo
So per ELF section function offset and instruction offset
will need to be adjusted before passing to the kernel, and
the kernel essentially expect only one code section regardless
of how many in the ELF file.
What do we propose and Why?
===========================
To support the above two use cases, we propose to
add an additional section, .BTF.ext, to the ELF file
which is the input of the bpf loader. A different section
is preferred since loader may need to manipulate it before
loading part of its data to the kernel.
The .BTF.ext section has a similar header to the .BTF section
and it contains two subsections for func_info and line_info.
. the func_info maps the func insn byte offset to a func
type in the .BTF type subsection.
. the line_info maps the insn byte offset to a line info.
. both func_info and line_info subsections are organized
by ELF PROGBITS AX sections.
pahole is not a good place to implement .BTF.ext as
pahole is mostly for structure hole information and more
importantly, we want to pass the actual code to the kernel.
. bpf program typically is small so storage overhead
should be small.
. in bpf land, it is totally possible that
an application loads the bpf program into the
kernel and then that application quits, so
holding debug info by the user space application
is not practical as you may not even know who
loads this bpf program.
. having source codes directly kept by kernel
would ease deployment since the original source
code does not need ship on every hosts and
kernel-devel package does not need to be
deployed even if kernel headers are used.
LLVM is a good place to implement.
. The only reliable time to get the source code is
during compilation time. This will result in both more
accurate information and easier deployment as
stated in the above.
. Another consideration is for JIT. The project like bcc
(https://github.com/iovisor/bcc)
use MCJIT to compile a C program into bpf insns and
load them to the kernel. The llvm generated BTF sections
will be readily available for such cases as well.
Design and implementation of emiting .BTF/.BTF.ext sections
===========================================================
The BTF debuginfo format is defined. Both .BTF and .BTF.ext
sections are generated directly from IR when both
"-target bpf" and "-g" are specified. Note that
dwarf sections are still generated as dwarf is used
by user space tools like llvm-objdump etc. for BPF target.
This patch also contains tests to verify generated
.BTF and .BTF.ext sections for all supported types, func_info
and line_info subsections. The patch is also tested
against linux kernel bpf sample tests and selftests.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D53736
llvm-svn: 347999
Currently, expressions like
.reloc 1f, R_MIPS_JALR, foo
1: nop
are not allowed, ie. an offset in .reloc can only be absolute value.
This patch adds support for labels as offsets.
If offset is a forward declared label, MCObjectStreamer keeps the fixup locally
and adds it to the fixups vector after the label (and its offset) is defined.
label+number is not supported yet.
Differential revision: https://reviews.llvm.org/D53990
llvm-svn: 347397
Summary:
This makes it easier/cleaner to generate a single signature from
this directive. Also:
- Adds the symbol name, such that we don't depend on the location
of this directive anymore.
- Actually constructs the signature in the assembler, and make the
assembler own it.
- Refactor the use of MVT vs ValType in the streamer and assembler
to require less conversions overall.
- Changed 700 or so tests to use it.
Reviewers: sbc100, dschuff
Subscribers: jgravelle-google, eraman, aheejin, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D54652
llvm-svn: 347228
Summary:
This adds support for the 'event section' specified in the exception
handling proposal. (This was named 'exception section' first, but later
renamed to 'event section' to take possibilities of other kinds of
events into consideration. But currently we only store exception info in
this section.)
The event section is added between the global section and the export
section. This is for ease of validation per request of the V8 team.
This patch:
- Creates the event symbol type, which is a weak symbol
- Makes 'throw' instruction take the event symbol '__cpp_exception'
- Adds relocation support for events
- Adds WasmObjectWriter / WasmObjectFile (Reader) support
- Adds obj2yaml / yaml2obj support
- Adds '.eventtype' printing support
Reviewers: dschuff, sbc100, aardappel
Subscribers: jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54096
llvm-svn: 346825
Summary:
DW_CFA_restore can only encode register numbers up to 64 (6 bits unsigned
int). For regsiter numbers > 64 we have to use DW_CFA_restore_extended
instead which uses a ULEB128 value.
I discovered this problem in the out-of-tree CHERI target since we use
DWARF register number 89 for our return capability register.
Reviewers: probinson, dblaikie, aprantl, espindola
Reviewed By: dblaikie
Subscribers: JohnReagan, emaste, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D54420
llvm-svn: 346751
Summary:
This is to replace the ELFAsmParser that WebAssembly was using, which
so far was a stub that didn't do anything, and couldn't work correctly
with wasm.
This new class is there to implement generic directives related to
wasm as a binary format. Wasm target specific directives are still
parsed in WebAssemblyAsmParser as before. The two classes now
cooperate more correctly too.
Also implemented .result which was missing. Any unknown directives
will now result in errors.
Reviewers: dschuff, sbc100
Subscribers: mgorny, jgravelle-google, eraman, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54360
llvm-svn: 346700
Use report_fatal_error instead of crashing or miscompiling. (It's
currently easier than it should be to hit this case because we don't
reuse codes across epilogs.)
llvm-svn: 346440
Summary:
The assembler was able to assemble and then dump back to .s, but
was failing to parse certain directives necessary for valid .o
output:
- .type directives are now recognized to distinguish function symbols
and others.
- .size is now parsed to provide function size.
- .globaltype (introduced in https://reviews.llvm.org/D54012) is now
recognized to ensure symbols like __stack_pointer have a proper type
set for both .s and .o output.
Also added tests for the above.
Reviewers: sbc100, dschuff
Subscribers: jgravelle-google, aheejin, dexonsmith, kristina, llvm-commits, sunfish
Differential Revision: https://reviews.llvm.org/D53842
llvm-svn: 346047
Summary:
This changes int types to unsigned int in a few places: function indices
and `wasm::Valtype` (which is unsigend int enum). Currently these
values cannot have negative values anyway, so this should not be a
functional change for now.
Reviewers: sbc100
Subscribers: dschuff, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54044
llvm-svn: 346031
Summary:
This adds dummy implementation of `EmitRawText` in `MCNullStreamer`.
This fixes the behavior of `AsmPrinter` with `MCNullStreamer` on targets
on which no integrated assembler is used. An attempt to emit inline asm
on such a target would previously lead to a crash, since `AsmPrinter` does not
check for `hasRawTextSupport` in `EmitInlineAsm` and calls `EmitRawText`
anyway if integrated assembler is disabled (the behavior has changed
in D2686).
Error message printed by MCStreamer:
> EmitRawText called on an MCStreamer that doesn't support it, something
> must not be fully mc'ized
Patch by Eugene Sharygin
Reviewers: dsanders, echristo
Reviewed By: dsanders
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D53938
llvm-svn: 345841
Add ARM64 unwind codes to MCLayer, as well SEH directives that will be emitted
by the frame lowering patch to follow. We only emit unwind codes into object
object files for now.
Differential Revision: https://reviews.llvm.org/D50166
llvm-svn: 345450
.debug_loclists is the DWARF 5 version of the .debug_loc.
With that patch, it will be emitted when DWARF 5 is used.
Differential revision: https://reviews.llvm.org/D53365
llvm-svn: 345377
Summary:
This adds support for LSDA (exception table) generation for wasm EH.
Wasm EH mostly follows the structure of Itanium-style exception tables,
with one exception: a call site table entry in wasm EH corresponds to
not a call site but a landing pad.
In wasm EH, the VM is responsible for stack unwinding. After an
exception occurs and the stack is unwound, the control flow is
transferred to wasm 'catch' instruction by the VM, after which the
personality function is called from the compiler-generated code. (Refer
to WasmEHPrepare pass for more information on this part.)
This patch:
- Changes wasm.landingpad.index intrinsic to take a token argument, to
make this 1:1 match with a catchpad instruction
- Stores landingpad index info and catch type info MachineFunction in
before instruction selection
- Lowers wasm.lsda intrinsic to an MCSymbol pointing to the start of an
exception table
- Adds WasmException class with overridden methods for table generation
- Adds support for LSDA section in Wasm object writer
Reviewers: dschuff, sbc100, rnk
Subscribers: mgorny, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52748
llvm-svn: 345345
Summary:
This renames the IsParsingMSInlineAsm member variable of AsmLexer to
LexMasmIntegers and moves it up to MCAsmLexer. This is the only behavior
controlled by that variable. I added a public setter, so that it can be
set from outside or from the llvm-mc command line. We may need to
arrange things so that users can get this behavior from clang, but
that's future work.
I also put additional hex literal lexing functionality under this flag
to fix PR32973. It appears that this hex literal parsing wasn't intended
to be enabled in non-masm-style blocks.
Now, masm integers (0b1101 and 0ABCh) work in __asm blocks from clang,
but 0b label references work when using .intel_syntax in standalone .s
files.
However, 0b label references will *not* work from __asm blocks in clang.
They will work from GCC inline asm blocks, which it sounds like is
important for Crypto++ as mentioned in PR36144.
Essentially, we only lex masm literals for inline asm blobs that use
intel syntax. If the .intel_syntax directive is used inside a gnu-style
inline asm statement, masm literals will not be lexed, which is
compatible with gas and llvm-mc standalone .s assembly.
This fixes PR36144 and PR32973.
Reviewers: Gerolf, avt77
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D53535
llvm-svn: 345189
Summary:
If the target does not support `.asciz` and `.ascii` directives, the
strings are represented as bytes and each byte is placed on the new line
as a separate byte directive `.b8 <data>`. NVPTX target allows to
represent the vector of the data of the same type as a vector, where
values are separated using `,` symbol: `.b8 <data1>,<data2>,...`. This
allows to reduce the size of the final PTX file. Ptxas tool includes ptx
files into the resulting binary object, so reducing the size of the PTX
file is important.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D45822
llvm-svn: 345142
I was considering adding another boolean here. I standardized on bools
since they allow default member initializers in the class definition.
This makes ShowParsedOperands protected instead of private, but that's
probably fine.
Reduce the SmallVector size while we're at it, since the common case is
that there is never a pending error.
llvm-svn: 344967
This avoids a crash (with asserts) or bad codegen (without asserts)
in Dwarf streamer later on. This patch fixes this condition in
MCStreamer and propogates SMLoc down when it's available with an
added bonus of source locations for those specific types of errors.
Further patches could use similar improvements as currently most
non-Windows CFI directives lack an SMLoc parameter.
Modified an existing test to verify source location propogation and
added an object-file version of it to verify that it does not crash in
addition to a standalone test to only ensure it does not crash.
Differential Revision: https://reviews.llvm.org/D51695
llvm-svn: 344781
When a landing pad is calculated in a program that is compiled
for micromips, it will point to an even address. Such an error will
cause a segmentation fault, as the instructions in micromips are
aligned on odd addresses. This patch sets the last bit of the offset
where a landing pad is, to 1, which will effectively be
an odd address and point to the instruction exactly.
Differential Revision: https://reviews.llvm.org/D52985
llvm-svn: 344591
Summary:
This adds support for LSDA (exception table) generation for wasm EH.
Wasm EH mostly follows the structure of Itanium-style exception tables,
with one exception: a call site table entry in wasm EH corresponds to
not a call site but a landing pad.
In wasm EH, the VM is responsible for stack unwinding. After an
exception occurs and the stack is unwound, the control flow is
transferred to wasm 'catch' instruction by the VM, after which the
personality function is called from the compiler-generated code. (Refer
to WasmEHPrepare pass for more information on this part.)
This patch:
- Changes wasm.landingpad.index intrinsic to take a token argument, to
make this 1:1 match with a catchpad instruction
- Stores landingpad index info and catch type info MachineFunction in
before instruction selection
- Lowers wasm.lsda intrinsic to an MCSymbol pointing to the start of an
exception table
- Adds WasmException class with overridden methods for table generation
- Adds support for LSDA section in Wasm object writer
Reviewers: dschuff, sbc100, rnk
Subscribers: mgorny, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52748
llvm-svn: 344575
The initial patch was not reviewed, and does not have any tests;
it should not have been merged.
This reverts 344395, 344390, 344387, 344385, 344381, 344376,
and 344366.
llvm-svn: 344405
* Move #include outside of namespaces
* Add missing #include
* Add out-of-line virtual destructor to BTFTypeEntry
designated initializers should also be fixed
llvm-svn: 344376
BTF is the debug format for BPF, a kernel virtual machine
and widely used for tracing, networking and security, etc ([1]).
Currently only instruction streams are passed to kernel,
the kernel verifier verifies them before execution. In order to
provide better visibility of bpf programs to user space
tools, some debug information, e.g., function names and
debug line information are desirable for kernel so tools
can get such information with better annotation
for jited instructions for performance or other reasons.
The dwarf is too complicated in kernel and for BPF.
Hence, BTF is designed to be the debug format for BPF ([2]).
Right now, pahole supports BTF for types, which
are generated based on dwarf sections in the ELF file.
In order to annotate performance metrics for jited bpf insns,
it is necessary to pass debug line info to the kernel.
Furthermore, we want to pass the actual code to the
kernel because of the following reasons:
. bpf program typically is small so storage overhead
should be small.
. in bpf land, it is totally possible that
an application loads the bpf program into the
kernel and then that application quits, so
holding debug info by the user space application
is not practical.
. having source codes directly kept by kernel
would ease deployment since the original source
code does not need ship on every hosts and
kernel-devel package does not need to be
deployed even if kernel headers are used.
The only reliable time to get the source code is
during compilation time. This will result in both more
accurate information and easier deployment as
stated in the above.
Another consideration is for JIT. The project like bcc
use MCJIT to compile a C program into bpf insns and
load them to the kernel ([3]). The generated BTF sections
will be readily available for such cases as well.
This patch implemented generation of BTF info in llvm
compiler. The BTF related sections will be generated
when both -target bpf and -g are specified. Two sections
are generated:
.BTF contains all the type and string information, and
.BTF.ext contains the func_info and line_info.
The separation is related to how two sections are used
differently in bpf loader, e.g., linux libbpf ([4]).
The .BTF section can be loaded into the kernel directly
while .BTF.ext needs loader manipulation before loading
to the kernel. The format of the each section is roughly
defined in llvm:include/llvm/MC/MCBTFContext.h and
from the implementation in llvm:lib/MC/MCBTFContext.cpp.
A later example also shows the contents in each section.
The type and func_info are gathered during CodeGen/AsmPrinter
by traversing dwarf debug_info. The line_info is
gathered in MCObjectStreamer before writing to
the object file. After all the information is gathered,
the two sections are emitted in MCObjectStreamer::finishImpl.
With cmake CMAKE_BUILD_TYPE=Debug, the compiler can
dump out all the tables except insn offset, which
will be resolved later as relocation records.
The debug type "btf" is used for BTFContext dump.
Dwarf tests the debug info generation with
llvm-dwarfdump to decode the binary sections and
check whether the result is expected. Currently
we do not have such a tool yet. We will implement
btf dump functionality in bpftool ([5]) as the bpftool is
considered the recommended tool for bpf introspection.
The implementation for type and func_info is tested
with linux kernel test cases. The line_info is visually
checked with dump from linux kernel libbpf ([4]) and
checked with readelf dumping section raw data.
Note that the .BTF and .BTF.ext information will not
be emitted to assembly code and there is no assembler
support for BTF either.
In the below, with a clang/llvm built with CMAKE_BUILD_TYPE=Debug,
Each table contents are shown for a simple C program.
-bash-4.2$ cat -n test.c
1 struct A {
2 int a;
3 char b;
4 };
5
6 int test(struct A *t) {
7 return t->a;
8 }
-bash-4.2$ clang -O2 -target bpf -g -mllvm -debug-only=btf -c test.c
Type Table:
[1] FUNC name_off=1 info=0x0c000001 size/type=2
param_type=3
[2] INT name_off=12 info=0x01000000 size/type=4
desc=0x01000020
[3] PTR name_off=0 info=0x02000000 size/type=4
[4] STRUCT name_off=16 info=0x04000002 size/type=8
name_off=18 type=2 bit_offset=0
name_off=20 type=5 bit_offset=32
[5] INT name_off=22 info=0x01000000 size/type=1
desc=0x02000008
String Table:
0 :
1 : test
6 : .text
12 : int
16 : A
18 : a
20 : b
22 : char
27 : test.c
34 : int test(struct A *t) {
58 : return t->a;
FuncInfo Table:
sec_name_off=6
insn_offset=<Omitted> type_id=1
LineInfo Table:
sec_name_off=6
insn_offset=<Omitted> file_name_off=27 line_off=34 line_num=6 column_num=0
insn_offset=<Omitted> file_name_off=27 line_off=58 line_num=7 column_num=3
-bash-4.2$ readelf -S test.o
......
[12] .BTF PROGBITS 0000000000000000 0000028d
00000000000000c1 0000000000000000 0 0 1
[13] .BTF.ext PROGBITS 0000000000000000 0000034e
0000000000000050 0000000000000000 0 0 1
[14] .rel.BTF.ext REL 0000000000000000 00000648
0000000000000030 0000000000000010 16 13 8
......
-bash-4.2$
The latest linux kernel ([6]) can already support .BTF with type information.
The [7] has the reference implementation in linux kernel side
to support .BTF.ext func_info. The .BTF.ext line_info support is not
implemented yet. If you have difficulty accessing [6], you can
manually do the following to access the code:
git clone https://github.com/yonghong-song/bpf-next-linux.git
cd bpf-next-linux
git checkout btf
The change will push to linux kernel soon once this patch is landed.
References:
[1]. https://www.kernel.org/doc/Documentation/networking/filter.txt
[2]. https://lwn.net/Articles/750695/
[3]. https://github.com/iovisor/bcc
[4]. https://github.com/torvalds/linux/tree/master/tools/lib/bpf
[5]. https://github.com/torvalds/linux/tree/master/tools/bpf/bpftool
[6]. https://github.com/torvalds/linux
[7]. https://github.com/yonghong-song/bpf-next-linux/tree/btf
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Differential Revision: https://reviews.llvm.org/D52950
llvm-svn: 344366
For O32 and N32 ABI FDE/CFI encoding should be `DW_EH_PE_sdata4` and only
N64 ABI uses `DW_EH_PE_sdata8`. To cover all cases this patch check code
pointer size and setup a correct FDE/CFI encoding type.
Differential revision: https://reviews.llvm.org/D52876
llvm-svn: 344040
The following instruction:
> str q28, [x0, #1*6*4*@]
contains a @ which is parsed as an empty symbol. The parser returns true
but has no error, so the assembler continues by ignoring the
instruction.
Differential Revision: https://reviews.llvm.org/D52645
llvm-svn: 343961
Summary:
These are emitted by the wasm backend for e.g.
__stack_pointer@GLOBAL which previously wasn't accepted by the
assembler.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, llvm-commits, sunfish
Differential Revision: https://reviews.llvm.org/D52911
llvm-svn: 343830
MCContext does not destroy MCSymbols on shutdown. So, rather than putting
SmallVectors (which may heap-allocate) inside MCSymbolWasm, use unowned pointer
to a WasmSignature instead. The signatures are now owned by the AsmPrinter.
Also uses WasmSignature instead of param and result vectors in TargetStreamer,
and leaves some TODOs for further simplification.
Differential Revision: https://reviews.llvm.org/D52580
llvm-svn: 343733
- Add fix so that all code paths that create DWARFContext
with an ObjectFile initialise the target architecture in the context
- Add an assert that the Arch is known in the Dwarf CallFrameString method
llvm-svn: 343317
This caused the DebugInfo/Sparc/gnu-window-save.ll test to fail.
> Functions that have signed return addresses need additional dwarf support:
> - After signing the LR, and before authenticating it, the LR register is in a
> state the is unusable by a debugger or unwinder
> - To account for this a new directive, .cfi_negate_ra_state, is added
> - This directive says the signed state of the LR register has now changed,
> i.e. unsigned -> signed or signed -> unsigned
> - This directive has the same CFA code as the SPARC directive GNU_window_save
> (0x2d), adding a macro to account for multiply defined codes
> - This patch matches the gcc implementation of this support:
> https://patchwork.ozlabs.org/patch/800271/
>
> Differential Revision: https://reviews.llvm.org/D50136
llvm-svn: 343103
Functions that have signed return addresses need additional dwarf support:
- After signing the LR, and before authenticating it, the LR register is in a
state the is unusable by a debugger or unwinder
- To account for this a new directive, .cfi_negate_ra_state, is added
- This directive says the signed state of the LR register has now changed,
i.e. unsigned -> signed or signed -> unsigned
- This directive has the same CFA code as the SPARC directive GNU_window_save
(0x2d), adding a macro to account for multiply defined codes
- This patch matches the gcc implementation of this support:
https://patchwork.ozlabs.org/patch/800271/
Differential Revision: https://reviews.llvm.org/D50136
llvm-svn: 343089
The Lexer doesn't use this state itself. It is only set and used by AsmParser so it seems like it should just be part of AsmParser.
Differential Revision: https://reviews.llvm.org/D52515
llvm-svn: 343027
DWARF5 spec says about single file split case:
"The sections that do not require relocation, however, can be written
to the relocatable object (.o) file but ignored by the
the linker or they can be written to a separate DWARF object (.dwo) file
that need not be accessed by the linker."
Nice way to make linker to ignore them is to set SHF_EXCLUDE flag.
It seems to be not harmful to always set it for .dwo sections.
That is what this patch does.
Differential revision: https://reviews.llvm.org/D52303
llvm-svn: 342800
This patch adds the ability for processor models to describe dependency breaking
instructions.
Different processors may specify a different set of dependency-breaking
instructions.
That means, we cannot assume that all processors of the same target would use
the same rules to classify dependency breaking instructions.
The main goal of this patch is to provide the means to describe dependency
breaking instructions directly via tablegen, and have the following
TargetSubtargetInfo hooks redefined in overrides by tabegen'd
XXXGenSubtargetInfo classes (here, XXX is a Target name).
```
virtual bool isZeroIdiom(const MachineInstr *MI, APInt &Mask) const {
return false;
}
virtual bool isDependencyBreaking(const MachineInstr *MI, APInt &Mask) const {
return isZeroIdiom(MI);
}
```
An instruction MI is a dependency-breaking instruction if a call to method
isDependencyBreaking(MI) on the STI (TargetSubtargetInfo object) evaluates to
true. Similarly, an instruction MI is a special case of zero-idiom dependency
breaking instruction if a call to STI.isZeroIdiom(MI) returns true.
The extra APInt is used for those targets that may want to select which machine
operands have their dependency broken (see comments in code).
Note that by default, subtargets don't know about the existence of
dependency-breaking. In the absence of external information, those method calls
would always return false.
A new tablegen class named STIPredicate has been added by this patch to let
processor models classify instructions that have properties in common. The idea
is that, a MCInstrPredicate definition can be used to "generate" an instruction
equivalence class, with the idea that instructions of a same class all have a
property in common.
STIPredicate definitions are essentially a collection of instruction equivalence
classes.
Also, different processor models can specify a different variant of the same
STIPredicate with different rules (i.e. predicates) to classify instructions.
Tablegen backends (in this particular case, the SubtargetEmitter) will be able
to process STIPredicate definitions, and automatically generate functions in
XXXGenSubtargetInfo.
This patch introduces two special kind of STIPredicate classes named
IsZeroIdiomFunction and IsDepBreakingFunction in tablegen. It also adds a
definition for those in the BtVer2 scheduling model only.
This patch supersedes the one committed at r338372 (phabricator review: D49310).
The main advantages are:
- We can describe subtarget predicates via tablegen using STIPredicates.
- We can describe zero-idioms / dep-breaking instructions directly via
tablegen in the scheduling models.
In future, the STIPredicates framework can be used for solving other problems.
Examples of future developments are:
- Teach how to identify optimizable register-register moves
- Teach how to identify slow LEA instructions (each subtarget defining its own
concept of "slow" LEA).
- Teach how to identify instructions that have undocumented false dependencies
on the output registers on some processors only.
It is also (in my opinion) an elegant way to expose knowledge to both external
tools like llvm-mca, and codegen passes.
For example, machine schedulers in LLVM could reuse that information when
internally constructing the data dependency graph for a code region.
This new design feature is also an "opt-in" feature. Processor models don't have
to use the new STIPredicates. It has all been designed to be as unintrusive as
possible.
Differential Revision: https://reviews.llvm.org/D52174
llvm-svn: 342555
In r319995, we fixed the line table format to version 2 on Darwin
because dsymutil didn't yet understand the new format which caused test
failures for the LLDB bots. This has been resolved in the meantime so
there's no reason to keep this limitation.
rdar://problem/35968332
llvm-svn: 342136
The main use case for this directive is to allow assembly writers to
write their own FPO data strings without going through the .cv_fpo*
directive family.
I'm experimenting with different RPN programs to fix PR38857, and I
figured I should go ahead and make this directive permanent.
llvm-svn: 341712
SHF_ARM_PURECODE flag when being built with the -mexecute-only flag.
All code sections of an ELF must have the flag set for the final .text
section to be execute-only, otherwise the flag gets removed.
A HasData flag is added to MCSection to aid in the determination that
the section is empty. A virtual setTargetSectionFlags is added to
MCELFObjectTargetWriter to allow subclasses to set target specific
section flags to be added to sections which we then use in the ARM
backend to set SHF_ARM_PURECODE.
Patch by Ivan Lozano!
Reviewed By: echristo
Differential Revision: https://reviews.llvm.org/D48792
llvm-svn: 341593
Remove braces around two, single statement "if" blocks in line with rest
of the file and the general LLVM code style. NFC, testing commit access.
llvm-svn: 341294
Summary:
Per clang-tidy:
function 'llvm::MCStreamer::checkCVLocSection' has a definition with different parameter names
.../llvm/lib/MC/MCStreamer.cpp:275:18: the definition seen here
.../llvm/include/llvm/MC/MCStreamer.h:235:8: differing parameters are named here: ('FuncId'), in definition: ('FunctionId')
Reviewers: bkramer
Reviewed By: bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51406
llvm-svn: 340912
I am experimenting with a single split dwarf (.dwo sections in .o files).
I want to make linker to ignore .dwo sections in .o, for that I am trying to add
SHF_EXCLUDE flag ("E") for them in my asm sample.
I found that currently, it is impossible to add any flag for debug sections using llvm-mc.
That happens because we have a set of predefined unique sections created early with default flags:
https://github.com/llvm-mirror/llvm/blob/master/lib/MC/MCObjectFileInfo.cpp#L391
This patch allows a user to add any flags he wants.
I had to edit TargetLoweringObjectFileImpl.cpp to set MetaData type for debug sections.
Their kind was Data by default (so they were allocatable) and so after changes introduced by
this patch the SHF_ALLOC flag was applied for them, what does not make sense for debug sections.
One of OrcJITTests tests failed because of that.
Differential revision: https://reviews.llvm.org/D51361
llvm-svn: 340904
Now that we create the label at the point of the directive, we don't
need to set the "current CV location", and then later when we emit the
next instruction, create a label for it and emit it.
DWARF still defers the labels used in .debug_loc until the next
instruction or value, for reasons unknown.
llvm-svn: 340883
Previously we followed the DWARF implementation, which waits until the
next instruction or data to emit the label to use in the .debug_loc
section. We might want to consider re-evaluating that design choice as
well, since it means the .loc skips alignment padding, for better or
worse.
This was the most minimal fix I could come up with, but we should be
able to do a lot of cleanups now that we don't need to save a pending CV
location on the CodeViewContext. I plan to do those next, but this
immediately fixes an assertion for some of our users.
llvm-svn: 340878
Summary:
For assembly input files, generate debug info even when the .file
directive is present, provided it does not include a file-number
argument. Fixes PR38695.
Reviewers: probinson, sidneym
Subscribers: aprantl, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D51315
llvm-svn: 340839
Summary:
Handle the case IDVal is an empty string.
This bug was uncovered by a LLVM MC Assembler Protocol Buffer
Fuzzer for the RISC-V assembly language.
Reviewers: rnk
Reviewed By: rnk
Subscribers: rnk, niravd, pcc, peter.smith, asb, grosbach, llvm-commits, bcain, kito-cheng, shiva0217, rogfer01, PkmX
Differential Revision: https://reviews.llvm.org/D50808
llvm-svn: 340678
Aligning section contents is not required, but only
recommended, by the specification. Microsoft's documentation says
(https://docs.microsoft.com/en-us/windows/desktop/debug/pe-format#section-table-section-headers):
"For object files, the value should be aligned on a 4-byte boundary
for best performance."
However, according to my measurements, aligning section contents has
a neutral to negative effect on performance.
I measured the median run time of 100 links of Chromium's
base_unittests on Linux with lld-link and on Windows with link.exe with
both aligned and unaligned sections. On Linux I didn't see a measurable
performance difference, and on Windows the link was slightly faster
with unaligned sections (presumably because on Windows the bottleneck
is I/O).
Also, the sections created by cl.exe are unaligned, so we should expect
tools to broadly accept unaligned sections.
Differential Revision: https://reviews.llvm.org/D51149
llvm-svn: 340514
The format is the same as in ELF: a sequence of ULEB128-encoded
symbol indexes.
Differential Revision: https://reviews.llvm.org/D51047
llvm-svn: 340499
wasm-lld expects relocation entries to be sorted by offset. In most
cases llvm produces them in order, but the CODE section (which combines
many MCSections) is an exception because we order the functions in
Symbol order, not in section order. What is more, its not clear weather
`recordRelocation` is guaranteed to be called in offset order so this
sort of most likely needed in the general case too.
Differential Revision: https://reviews.llvm.org/D51065
llvm-svn: 340423
Remove code for writing auxiliary symbols of type function definition
and begin function. These types of symbols are associated with
pre-CodeView debug info and we never emit them.
llvm-svn: 340113
Handle the case when the symbol is private. Private symbols are not in
the COFF object file symbol table, so they aren't inserted into
SymbolMap. We can't look up the section of the symbol that way. Instead,
get the MCSection from the MCSymbol and map that to the object file
section.
Print a better error message when the symbol has no section, like when
the symbol is undefined.
Fixes PR38607
llvm-svn: 339942
Allow the comparison of x86 registers in the evaluation of assembler
directives. This generalizes and simplifies the extension from r334022
to catch another case found in the Linux kernel.
Reviewers: rnk, void
Reviewed By: rnk
Subscribers: hiraditya, nickdesaulniers, llvm-commits
Differential Revision: https://reviews.llvm.org/D50795
llvm-svn: 339895
When emitting the difference between two symbols, the standard behavior is
that the difference will be resolved to an absolute value if both of the
symbols are offsets from the same data fragment. This is undesirable on
architectures such as RISC-V where relaxation in the linker may cause the
computed difference to become invalid. This caused an issue when compiling to
object code, where the size of a function in the debug information was already
calculated even though it could change as a consequence of relaxation in the
subsequent linking stage.
This patch inhibits the resolution of symbol differences to absolute values
where the target's AsmBackend has declared that it does not want these to be
folded.
Differential Revision: https://reviews.llvm.org/D45773
Patch by Edward Jones.
llvm-svn: 339864
Summary:
The TType encoding, LSDA encoding, and personality encoding are all
passed explicitly by CodeGen to the assembler through .cfi_* directives,
so only the AsmPrinter needs to know about them.
The FDE CFI encoding however, controls the encoding of the label
implicitly created by the .cfi_startproc directive. That directive seems
to be special in that it doesn't take an encoding, so the assembler just
has to know how to encode one DSO-local label reference from .eh_frame
to .text.
As a result, it looks like MC will continue to have to know when the
large code model is in use. Perhaps we could invent a '.cfi_startproc
[large]' flag so that this knowledge doesn't need to pollute the
assembler.
Reviewers: davide, lliu0, JDevlieghere
Subscribers: hiraditya, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D50533
llvm-svn: 339397
On Darwin we pin the DWARF line tables to version 2. Stop doing so for
DWARF v5 and later.
Differential revision: https://reviews.llvm.org/D49381
llvm-svn: 339288
This matches our behaviour for regular (i.e. relocated) references to
private symbols and therefore avoids needing to unnecessarily write
address-significant .L symbols to the object file's symbol table,
which can interfere with stack traces.
Fixes check-cfi after r339050.
llvm-svn: 339066
There are a bunch of edge cases and inconsistencies in how we're emitting sections
cause this warning to fire and it needs more work.
This reverts commit r335558.
llvm-svn: 338968
Getting the DWARF types section is only implemented for ELF object
files. We already disabled emitting debug types in clang (r337717), but
now we also report an fatal error (rather than crashing) when trying to
obtain this section in MC. Additionally we ignore the generate debug
types flag for unsupported target triples.
See PR38190 for more information.
Differential revision: https://reviews.llvm.org/D50057
llvm-svn: 338527
It is necessary to generate fixups in .debug_line as relaxation is
enabled due to the address delta may be changed after relaxation.
DWARF will record the mappings of lines and addresses in
.debug_line section. It will encode the information using special
opcodes, standard opcodes and extended opcodes in Line Number
Program. I use DW_LNS_fixed_advance_pc to encode fixed length
address delta and DW_LNE_set_address to encode absolute address
to make it possible to generate fixups in .debug_line section.
Differential Revision: https://reviews.llvm.org/D46850
llvm-svn: 338477
This patch teaches llvm-mca how to identify dependency breaking instructions on
btver2.
An example of dependency breaking instructions is the zero-idiom XOR (example:
`XOR %eax, %eax`), which always generates zero regardless of the actual value of
the input register operands.
Dependency breaking instructions don't have to wait on their input register
operands before executing. This is because the computation is not dependent on
the inputs.
Not all dependency breaking idioms are also zero-latency instructions. For
example, `CMPEQ %xmm1, %xmm1` is independent on
the value of XMM1, and it generates a vector of all-ones.
That instruction is not eliminated at register renaming stage, and its opcode is
issued to a pipeline for execution. So, the latency is not zero.
This patch adds a new method named isDependencyBreaking() to the MCInstrAnalysis
interface. That method takes as input an instruction (i.e. MCInst) and a
MCSubtargetInfo.
The default implementation of isDependencyBreaking() conservatively returns
false for all instructions. Targets may override the default behavior for
specific CPUs, and return a value which better matches the subtarget behavior.
In future, we should teach to Tablegen how to automatically generate the body of
isDependencyBreaking from scheduling predicate definitions. This would allow us
to expose the knowledge about dependency breaking instructions to the machine
schedulers (and, potentially, other codegen passes).
Differential Revision: https://reviews.llvm.org/D49310
llvm-svn: 338372
Even though gas doesn't document it, it has been supported there for
a very long time.
This produces the 32 bit relative virtual address (aka image relative
address) for a given symbol. ".rva foo" is essentially equal to
".long foo@imgrel".
Differential Revision: https://reviews.llvm.org/D49821
llvm-svn: 338063
The standard library functions ::isprint/std::isprint have platform-
and locale-dependent behavior which makes LLVM's output less
predictable. In particular, regression tests my fail depending on the
implementation of these functions.
Implement llvm::isPrint in StringExtras.h with a standard behavior and
replace all uses of ::isprint/std::isprint by a call it llvm::isPrint.
The function is inlined and does not look up language settings so it
should perform better than the standard library's version.
Such a replacement has already been done for isdigit, isalpha, isxdigit
in r314883. gtest does the same in gtest-printers.cc using the following
justification:
// Returns true if c is a printable ASCII character. We test the
// value of c directly instead of calling isprint(), which is buggy on
// Windows Mobile.
inline bool IsPrintableAscii(wchar_t c) {
return 0x20 <= c && c <= 0x7E;
}
Similar issues have also been encountered by Julia:
https://github.com/JuliaLang/julia/issues/7416
I noticed the problem myself when on Windows isprint('\t') started to
evaluate to true (see https://stackoverflow.com/questions/51435249) and
thus caused several unit tests to fail. The result of isprint doesn't
seem to be well-defined even for ASCII characters. Therefore I suggest
to replace isprint by a platform-independent version.
Differential Revision: https://reviews.llvm.org/D49680
llvm-svn: 338034
This reverts commit r337951.
While that kind of shared constant generally works fine in a MinGW
setting, it broke some cases of inline assembly that worked before:
$ cat const-asm.c
int MULH(int a, int b) {
int rt, dummy;
__asm__ (
"imull %3"
:"=d"(rt), "=a"(dummy)
:"a"(a), "rm"(b)
);
return rt;
}
int func(int a) {
return MULH(a, 1);
}
$ clang -target x86_64-win32-gnu -c const-asm.c -O2
const-asm.c:4:9: error: invalid variant '00000001'
"imull %3"
^
<inline asm>:1:15: note: instantiated into assembly here
imull __real@00000001(%rip)
^
A similar error is produced for i686 as well. The same test with a
target of x86_64-win32-msvc or i686-win32-msvc works fine.
llvm-svn: 338018
GNU binutils tools have no problems with this kind of shared constants,
provided that we actually hook it up completely in AsmPrinter and
produce a global symbol.
This effectively reverts SVN r335918 by hooking the rest of it up
properly.
This feature was implemented originally in SVN r213006, with no reason
for why it can't be used for MinGW other than the fact that GCC doesn't
do it while MSVC does.
Differential Revision: https://reviews.llvm.org/D49646
llvm-svn: 337951
This actually has nothing to do with the associative comdat sections
that aren't supported by GNU binutils ld.
Clarify the comments from SVN r335918 and use a separate flag for it.
Differential Revision: https://reviews.llvm.org/D49645
llvm-svn: 337757
Since SVN r335286, the .xdata sections are produced without an attached
symbol, which requires using a different syntax when printing assembly
output.
Instead of the usual syntax of '.section <name>,"dr",discard,<symbol>',
use '.section <name>,"dr"' + '.linkonce discard' (which is what GCC
uses for all assembly output).
This fixes PR38254.
Differential Revision: https://reviews.llvm.org/D49651
llvm-svn: 337756
This support was partial and temporary. Now that we have
wasm object file support its no longer needed.
Differential Revision: https://reviews.llvm.org/D48744
llvm-svn: 337222
and no use of DW_FORM_rnglistx with the DW_AT_ranges attribute.
Reviewer: aprantl
Differential Revision: https://reviews.llvm.org/D49214
llvm-svn: 336927
AT_NAME was being emitted before the directory paths were remapped. This
ensures that all paths are remapped before anything is emitted.
An additional test case has been added.
Note that this only works if the replacement string is an absolute path.
If not, then AT_decl_file believes the new path is a relative path, and
joins that path with the compilation directory. I do not know of a good
way to resolve this.
Patch by: Siddhartha Bagaria (starsid)
Differential revision: https://reviews.llvm.org/D49169
llvm-svn: 336793
When manually finishing the object writer in dsymutil, it's possible
that there are pending labels that haven't been resolved. This results
in an assertion when the assembler tries to fixup a label that doesn't
have an address yet.
Differential revision: https://reviews.llvm.org/D49131
llvm-svn: 336688
debug compilation dir when compiling assembly files with -g.
Part of PR38050.
Patch by Siddhartha Bagaria!
Differential Revision: https://reviews.llvm.org/D48988
llvm-svn: 336680
On darwin, all virtual sections have zerofill type, and having a
.zerofill directive in a non-virtual section is not allowed. Instead of
asserting, show a nicer error.
In order to use the equivalent of .zerofill in a non-virtual section,
the usage of .zero of .space is required.
This patch replaces the assert with an error.
Differential Revision: https://reviews.llvm.org/D48517
llvm-svn: 336127
section flags in the ELF assembler. This matches the defaults
given in the rest of MC.
Fixes PR37997 where we couldn't assemble our own assembly output
without warnings.
llvm-svn: 336072
There are quite a few if statements that enumerate all these cases. It gets
even worse in our fork of LLVM where we also have a Triple::cheri (which
is mips64 + CHERI instructions) and we had to update all if statements that
check for Triple::mips64 to also handle Triple::cheri. This patch helps to
reduce our diff to upstream and should also make some checks more readable.
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D48548
llvm-svn: 335493
DWARF v5 explicitly represents file #0 in the line table. Prior
versions did not, so ".loc 0" is still an error in those cases.
Differential Revision: https://reviews.llvm.org/D48452
llvm-svn: 335350
With compilation fix.
Original commit message:
D39788 added a '.stack-size' section containing metadata on function stack sizes
to output ELF files behind the new -stack-size-section flag.
This change does following two things on top:
1) Imagine the case when there are -ffunction-sections flag given and there are text sections in COMDATs.
The patch adds a '.stack-size' section into corresponding COMDAT group, so that linker will be able to
eliminate them fast during resolving the COMDATs.
2) Patch sets a SHF_LINK_ORDER flag and links '.stack-size' with the corresponding .text.
With that linker will be able to do -gc-sections on dead stack sizes sections.
Differential revision: https://reviews.llvm.org/D46874
llvm-svn: 335336
D39788 added a '.stack-size' section containing metadata on function stack sizes
to output ELF files behind the new -stack-size-section flag.
This change does following two things on top:
1) Imagine the case when there are -ffunction-sections flag given and there are text sections in COMDATs.
The patch adds a '.stack-size' section into corresponding COMDAT group, so that linker will be able to
eliminate them fast during resolving the COMDATs.
2) Patch sets a SHF_LINK_ORDER flag and links '.stack-size' with the corresponding .text.
With that linker will be able to do -gc-sections on dead stack sizes sections.
Differential revision: https://reviews.llvm.org/D46874
llvm-svn: 335332
Summary:
GCC and the binutils COFF linker do comdats differently from MSVC.
If we want to be ABI compatible, we have to do what they do, which is to
emit unique section names like ".text$_Z3foov" instead of short section
names like ".text". Otherwise, the binutils linker gets confused and
reports multiple definition errors when two object files from GCC and
Clang containing the same inline function are linked together.
The best description of the issue is probably at
https://github.com/Alexpux/MINGW-packages/issues/1677, we don't seem to
have a good one in our tracker.
I fixed up the .pdata and .xdata sections needed everywhere other than
32-bit x86. GCC doesn't use associative comdats for those, it appears to
rely on the section name.
Reviewers: smeenai, compnerd, mstorsjo, martell, mati865
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D48402
llvm-svn: 335286
This patch teaches llvm-mca how to identify register writes that implicitly zero
the upper portion of a super-register.
On X86-64, a general purpose register is implemented in hardware as a 64-bit
register. Quoting the Intel 64 Software Developer's Manual: "an update to the
lower 32 bits of a 64 bit integer register is architecturally defined to zero
extend the upper 32 bits". Also, a write to an XMM register performed by an AVX
instruction implicitly zeroes the upper 128 bits of the aliasing YMM register.
This patch adds a new method named clearsSuperRegisters to the MCInstrAnalysis
interface to help identify instructions that implicitly clear the upper portion
of a super-register. The rest of the patch teaches llvm-mca how to use that new
method to obtain the information, and update the register dependencies
accordingly.
I compared the kernels from tests clear-super-register-1.s and
clear-super-register-2.s against the output from perf on btver2. Previously
there was a large discrepancy between the estimated IPC and the measured IPC.
Now the differences are mostly in the noise.
Differential Revision: https://reviews.llvm.org/D48225
llvm-svn: 335113
Enables using the high and high-adjusted symbol modifiers on thread local
storage modifers in powerpc assembly. Needed to be able to support 64 bit
thread-pointer and dynamic-thread-pointer access sequences.
Differential Revision: https://reviews.llvm.org/D47754
llvm-svn: 334856
Add support for the "@high" and "@higha" symbol modifiers in powerpc64 assembly.
The modifiers represent accessing the segment consiting of bits 16-31 of a
64-bit address/offset.
Differential Revision: https://reviews.llvm.org/D47729
llvm-svn: 334855
Instruction bundling is only supported on descendants of the
MCEncodedFragment type. By moving the bundling functionality and
MCSubtargetInfo to this class it makes it easier to set and extract the
MCSubtargetInfo when it is necessary.
This is a refactoring change that will make it easier to pass the
MCSubtargetInfo through to writeNops when nop padding is required.
Differential Revision: https://reviews.llvm.org/D45959
llvm-svn: 334814
This reverts rL331412. We didn't up using fragment atoms
in the wasm object writer after all.
Differential Revision: https://reviews.llvm.org/D48173
llvm-svn: 334734
In some cases, for example when compiling a preprocessed file, the
front-end is not able to provide an MD5 checksum for all files. When
that happens, omit the MD5 checksums from the final DWARF, because
DWARF doesn't have a way to indicate that some but not all files have
a checksum.
When assembling a .s file, and some but not all .file directives
provide an MD5 checksum, issue a warning and don't emit MD5 into the
DWARF.
Fixes PR37623.
Differential Revision: https://reviews.llvm.org/D48135
llvm-svn: 334710
Don't provide the assembler source as the "root file" unless the user
asked to have debug info for the assembler source (with -g).
If the source doesn't provide an explicit ".file 0" then (a) use the
compilation directory as directory #0, and (b) use the file #1 info
for file #0 also.
Differential Revision: https://reviews.llvm.org/D48055
llvm-svn: 334512
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
This is a fix for the problem arising in D47374 (PR37678):
https://bugs.llvm.org/show_bug.cgi?id=37678
We may not have throughput info because it's not specified in the model
or it's not available with variant scheduling, so assume that those
instructions can execute/complete at max-issue-width.
Differential Revision: https://reviews.llvm.org/D47723
llvm-svn: 334055
Summary:
Allow extended parsing of variable assembler assignment syntax and modify X86 to permit
VAR = register assignment. As we emit these as .set directives when possible, we inline
such expressions in output assembly.
Fixes PR37425.
Reviewers: rnk, void, echristo
Reviewed By: rnk
Subscribers: nickdesaulniers, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D47545
llvm-svn: 334022
Object FIle Representation
At codegen time this is emitted into the ELF file a pair of symbol indices and a weight. In assembly it looks like:
.cg_profile a, b, 32
.cg_profile freq, a, 11
.cg_profile freq, b, 20
When writing an ELF file these are put into a SHT_LLVM_CALL_GRAPH_PROFILE (0x6fff4c02) section as (uint32_t, uint32_t, uint64_t) tuples as (from symbol index, to symbol index, weight).
Differential Revision: https://reviews.llvm.org/D44965
llvm-svn: 333823
This patch extends the MCSchedModel API with new methods that can be used to
obtain the latency and reciprocal througput information for an MCInst.
Scheduling models have recently gained the ability to resolve variant scheduling
classes associated with MCInst objects. Before, models were only able to resolve
a variant scheduling class from a MachineInstr object.
This patch is mainly required by D47374 to avoid regressing a pair of x86
specific -print-schedule tests for btver2. Patch D47374 introduces a new variant
class to teach the btver scheduling model (x86 target) how to correctly compute
the latency profile for some zero-idioms using the new scheduling predicates.
The new methods added by this patch would be mainly used by llc when flag
-print-schedule is specified. In particular, tests that contain inline assembly
require that code is parsed at code emission stage into a sequence of MCInst.
That forces the print-schedule functionality to query the latency/rthroughput
information for MCInst instructions too. If we don't expose this new API, then
we lose "-print-schedule" test coverage as soon as variant scheduling classes
are added to the x86 models.
The tablegen SubtargetEmitter changes teaches how to query latency profile
information using a object that derives from TargetSubtargetInfo. Note that this
should really have been part of r333286. To avoid code duplication, the logic
that "resolves" variant scheduling classes for MCInst, has been moved to a
common place in MC. That logic is used by the "resolveVariantSchedClass" methods
redefined in override by the tablegen'd GenSubtargetInfo classes.
Differential Revision: https://reviews.llvm.org/D47536
llvm-svn: 333650
For RISC-V it is desirable to have relaxation happen in the linker once
addresses are known, and as such the size between two instructions/byte
sequences in a section could change.
For most assembler expressions, this is fine, as the absolute address results
in the expression being converted to a fixup, and finally relocations.
However, for expressions such as .quad .L2-.L1, the assembler folds this down
to a constant once fragments are laid out, under the assumption that the
difference can no longer change, although in the case of linker relaxation the
differences can change at link time, so the constant is incorrect. One place
where this commonly appears is in debug information, where the size of a
function expression is in a form similar to the above.
This patch extends the assembler to allow an AsmBackend to declare that it
does not want the assembler to fold down this expression, and instead generate
a pair of relocations that allow the linker to carry out the calculation. In
this case, the expression is not folded, but when it comes to emitting a
fixup, the generic FK_Data_* fixups are converted into a pair, one for the
addition half, one for the subtraction, and this is passed to the relocation
generating methods as usual. I have named these FK_Data_Add_* and
FK_Data_Sub_* to indicate which half these are for.
For RISC-V, which supports this via e.g. the R_RISCV_ADD64, R_RISCV_SUB64 pair
of relocations, these are also set to always emit relocations relative to
local symbols rather than section offsets. This is to deal with the fact that
if relocations were calculated on e.g. .text+8 and .text+4, the result 12
would be stored rather than 4 as both addends are added in the linker.
Differential Revision: https://reviews.llvm.org/D45181
Patch by Simon Cook.
llvm-svn: 333079
This code appears to have been copied from the mach-o streamer. It has
no effect in ELF because indirect symbols are specific to mach-o.
llvm-svn: 332926
This class will be used to create regular, non-split ELF files.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47049
llvm-svn: 332870
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
Also clean up a couple of hacks where we were writing the section
contents to another stream by setting the object writer's stream,
writing and setting it back.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47038
llvm-svn: 332858
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
Provide some free functions to reduce verbosity of endian-writing
a single value, and replace the endianness template parameter with
a field.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47032
llvm-svn: 332757
The idea is that a client that wants split dwarf would create a
specific kind of object writer that creates two files, and use it to
create the streamer.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47050
llvm-svn: 332749
Avoid requirement that number of values must be known at assembler
time.
Fixes PR33586.
Reviewers: rnk, peter.smith, echristo, jyknight
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D46703
llvm-svn: 332741
For RISCV branch instructions, we need to preserve relocation types when linker
relaxation enabled, so then linker could modify offset when the branch offsets
changed.
We preserve relocation types by define shouldForceRelocation.
IsResolved return by evaluateFixup will always false when shouldForceRelocation
return true. It will make RISCV MC Branch Relaxation always relax 16-bit
branches to 32-bit form, even if the symbol actually could be resolved.
To avoid 16-bit branches always relax to 32-bit form when linker relaxation
enabled, we add a new parameter WasForced to indicate that the symbol actually
couldn't be resolved and not forced by shouldForceRelocation return true.
RISCVAsmBackend::fixupNeedsRelaxationAdvanced could relax branches with
unresolved symbols by (!IsResolved && !WasForced).
RISCV MC Branch Relaxation is needed because RISCV could perform 32-bit
to 16-bit transformation in MC layer.
Differential Revision: https://reviews.llvm.org/D46350
llvm-svn: 332696
The getAtom() method wasn't doing what we needed in all cases. We want
the symbols for the function which defines that section. We can compute
this easily enough and we know that we have at most one function in each
section.
Once this lands I will revert rL331412 which is no longer needed.
Fixes PR37409
Differential Revision: https://reviews.llvm.org/D46970
llvm-svn: 332517
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
These symbols only get included in the output symbols table if
they are used in a relocation.
This behaviour matches more closely the ELF object writer.
Differential Revision: https://reviews.llvm.org/D46561
llvm-svn: 332005
MCSymbol has getIndex/setIndex which are implementation defined
and on other platforms are used to store the symbol table
index. It makes sense to use this rather than invent a new
mapping.
Differential Revision: https://reviews.llvm.org/D46555
llvm-svn: 331705
Updated wasm section symbols names to match section name, and ensure all
referenced sections will have a symbol (per DWARF spec v3, Figure 43)
Patch by Yury Delendik!
Differential Revision: https://reviews.llvm.org/D46543
llvm-svn: 331664
This code previously existed only in MCMachOStreamer but is
useful for WebAssembly too. See: D46335
Differential Revision: https://reviews.llvm.org/D46297
llvm-svn: 331412
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Without this change, GCC 7 raises the warning below:
control reaches end of non-void function
Reviewers: sbc100, andreadb
Reviewed By: andreadb
Differential Revision: https://reviews.llvm.org/D46304
llvm-svn: 331255
The warning was (introduced in r331220):
lib/MC/WasmObjectWriter.cpp:51:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
llvm-svn: 331251
Teach AsmParser to check with Assembler for when evaluating constant
expressions. This improves the handing of preprocessor expressions
that must be resolved at parse time. This idiom can be found as
assembling-time assertion checks in source-level assemblers. Note that
this relies on the MCStreamer to keep sufficient tabs on Section /
Fragment information which the MCAsmStreamer does not. As a result the
textual output may fail where the equivalent object generation would
pass. This can most easily be resolved by folding the MCAsmStreamer
and MCObjectStreamer together which is planned for in a separate
patch.
Currently, this feature is only enabled for assembly input, keeping IR
compilation consistent between assembly and object generation.
Reviewers: echristo, rnk, probinson, espindola, peter.smith
Reviewed By: peter.smith
Subscribers: eraman, peter.smith, arichardson, jyknight, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45164
llvm-svn: 331218
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Summary:
Only allow a single unique .symver alias per symbol. This matches the
behavior of gas. I noticed that we ignored multiple mismatched symver
directives looking at https://reviews.llvm.org/D45798
Reviewers: pcc, tejohnson, espindola
Reviewed By: pcc
Subscribers: emaste, arichardson, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D45845
llvm-svn: 331078
Summary: Also test for symbols information in test/MC/WebAssembly/debug-info.ll.
Subscribers: jfb, dschuff, jgravelle-google, aheejin, sunfish, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46160
llvm-svn: 331005
If no data or instructions are emitted after a location directive, we
should clear the cv_loc when we change sections, or it will be emitted
at the beginning of the next section. This violates our invariant that
all .cv_loc directives belong to the same section. Add clearer
assertions for this.
llvm-svn: 330884
Remove the use of default argument in favor of a separate
startCustomSection method.
Differential Revision: https://reviews.llvm.org/D45794
llvm-svn: 330632
This is a temporary solution until a proper WASM implementation of
MCAsmParserExtension is in place, but at least for now will unblock this
path.
Added test to make sure this path works with the WASM Assembler.
Patch By Wouter van Oortmerssen!
Differential Revision: https://reviews.llvm.org/D45386
llvm-svn: 330370
TargetSchedModel now always delegates to MCSchedModel the computation of
instruction latency and reciprocal throughput.
No functional change intended.
llvm-svn: 330099
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: grosbach, void, ruiu
Reviewed By: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45138
llvm-svn: 330058
Previously the MD5 option of the .file directive provided the checksum
as a quoted hex string; now it's a normal hex number with 0x prefix,
same as the .octa directive accepts.
Differential Revision: https://reviews.llvm.org/D45459
llvm-svn: 329820
Summary:
Darwin dynamic linker can handle weak symbols in ConstDataSection.
ReadonReadOnlyWithRel symbols should be emitted in ConstDataSection
instead of normal DataSection.
rdar://problem/39298457
Reviewers: dexonsmith, kledzik
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45472
llvm-svn: 329752
Summary:
The LLVM SourceMgr class (which is used indirectly by Swift, though not Clang)
has a routine for looking up line numbers of SMLocs. This routine uses a
shared, special-purpose cache that handles exactly one access pattern
efficiently: looking up the line number of an SMLoc that points into the same
buffer as the last query made to the SourceMgr, at a location in the buffer at
or ahead of the last query.
When this works it's fine, but when it fails it's catastrophic for performancer:
one recent out-of-order access from a Swift utility routine ran for tens of
seconds, spending 99% of its time repeatedly scanning buffers for '\n'.
This change removes the shared cache from the SourceMgr and installs a new
cache in each SrcBuffer. The per-SrcBuffer caches are also "full", in the sense
that rather than caching a single last-query pointer, they cache _all_ the
line-ending offsets, in a binary-searchable array, such that once it's
populated (on first access), all subsequent access patterns run at the same
speed.
Performance measurements I've done show this is actually a little bit faster on
real codebases (though only a couple fractions of a percent). Memory usage is
up by a few tens to hundreds of bytes per SrcBuffer that has a line lookup done
on it; I've attempted to minimize this by using dynamic selection of integer
sized when storing offset arrays. But the main motive here is to
make-impossible the cases we don't always see, that show up by surprise when
there is an out-of-order access pattern.
Reviewers: jordan_rose
Reviewed By: jordan_rose
Subscribers: probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D45003
llvm-svn: 329470
Summary:
This patch implements a tablegen-driven Instruction Compression
mechanism for generating RISCV compressed instructions
(C Extension) from the expanded instruction form.
This tablegen backend processes CompressPat declarations in a
td file and generates all the compile-time and runtime checks
required to validate the declarations, validate the input
operands and generate correct instructions.
The checks include validating register operands, immediate
operands, fixed register operands and fixed immediate operands.
Example:
class CompressPat<dag input, dag output> {
dag Input = input;
dag Output = output;
list<Predicate> Predicates = [];
}
let Predicates = [HasStdExtC] in {
def : CompressPat<(ADD GPRNoX0:$rs1, GPRNoX0:$rs1, GPRNoX0:$rs2),
(C_ADD GPRNoX0:$rs1, GPRNoX0:$rs2)>;
}
The result is an auto-generated header file
'RISCVGenCompressEmitter.inc' which exports two functions for
compressing/uncompressing MCInst instructions, plus
some helper functions:
bool compressInst(MCInst& OutInst, const MCInst &MI,
const MCSubtargetInfo &STI,
MCContext &Context);
bool uncompressInst(MCInst& OutInst, const MCInst &MI,
const MCRegisterInfo &MRI,
const MCSubtargetInfo &STI);
The clients that include this auto-generated header file and
invoke these functions can compress an instruction before emitting
it, in the target-specific ASM or ELF streamer, or can uncompress
an instruction before printing it, when the expanded instruction
format aliases is favored.
The following clients were added to implement compression\uncompression
for RISCV:
1) RISCVAsmParser::MatchAndEmitInstruction:
Inserted a call to compressInst() to compresses instructions
parsed by llvm-mc coming from an ASM input.
2) RISCVAsmPrinter::EmitInstruction:
Inserted a call to compressInst() to compress instructions that
were lowered from Machine Instructions (MachineInstr).
3) RVInstPrinter::printInst:
Inserted a call to uncompressInst() to print the expanded
version of the instruction instead of the compressed one (e.g,
add s0, s0, a5 instead of c.add s0, a5) when -riscv-no-aliases
is not passed.
This patch squashes D45119, D42780 and D41932. It was reviewed in smaller patches by
asb, efriedma, apazos and mgrang.
Reviewers: asb, efriedma, apazos, llvm-commits, sabuasal
Reviewed By: sabuasal
Subscribers: mgorny, eraman, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, niosHD, kito-cheng, shiva0217, zzheng
Differential Revision: https://reviews.llvm.org/D45385
llvm-svn: 329455
This patch adds a way for users to create their own custom sections to
be added to wasm files. At the LLVM IR layer, they are defined through
the "wasm.custom_sections" named metadata. The expected use case for
this is bindings generators such as wasm-bindgen.
Patch by Dan Gohman
Differential Revision: https://reviews.llvm.org/D45297
llvm-svn: 329315
- MSVC was not OK with a static_assert referencing a non-static member
variable, even though it was just in a sizeof(expression). I move the
assert into the emit function, where it is probably more useful.
- Tests were failing in builds which did not have the X86 target
configured. Since this functionality is not target-specific, I have
removed the target specifiers from the .ll files.
llvm-svn: 329201
Summary:
This patch adds a DwarfAccelTableEmitter class, which generates an
accelerator table, as specified in DWARF v5 standard. At the moment it
only generates a DIE offset column and (if we are indexing more than one
compile unit) a CU column.
Indexing type units is not currently supported, as we don't even have
the ability to generate DWARF v5-compatible compile units.
The implementation is not data-source agnostic like the one generating
apple tables. This was not necessary as we currently only have one user
of this code, and without a second user it was not obvious to me how to
best abstract this. (The difference between these tables and the apple
ones is that they need a lot more metadata about the debug info they are
indexing).
The generation is triggered by the --accel-tables argument, which
supersedes the --dwarf-accel-tables arg -- the latter was a simple
on-off switch, but not we can choose between two kinds of accelerator
tables we can generate.
This is tested by parsing the generated tables with llvm-dwarfdump and
the DWARFVerifier, and I've also checked that GNU readelf is able to
make sense of the tables.
Differential Revision: https://reviews.llvm.org/D43286
llvm-svn: 329179
Summary:
Some targets do not support extended format of .loc directive and
support only simple format: .loc <FileID> <Line> <Column>. Patch adds
MCAsmInfo flag and option that allows emit .loc directive without
additional flags.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45184
llvm-svn: 329089
This should fix the problem reported by the lld buildbots:
- Builder lld-x86_64-darwin13, Build #19782
- Builder lld-perf-testsuite, Build #1419
llvm-svn: 329068
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
We emit the new syntax only for DWARF v5 and later.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328805
This reverts commit r328676.
Commit r328676 broke the -no-integrated-as flag necessary to build Linux kernel with Clang:
$ cat t.c
void foo() {}
$ clang -no-integrated-as -c t.c -g
/tmp/t-dcdec5.s: Assembler messages:
/tmp/t-dcdec5.s:8: Error: file number less than one
clang-7.0: error: assembler command failed with exit code 1 (use -v to see invocation)
llvm-svn: 328699
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328676
If a given split type unit does not have source locations, don't have
it refer to the split line table.
If no split type unit refers to the split line table, don't emit the
line table at all.
This will save a little space on rare occasions, but also refactors
things a bit to improve which class is responsible for what.
Responding to review comments on r326395.
Differential Revision: https://reviews.llvm.org/D44220
llvm-svn: 328670
On Hexagon "x = y" is a syntax used in most instructions, and is not
treated as a directive.
Differential Revision: https://reviews.llvm.org/D44256
llvm-svn: 328635
offsets for code models other than small/medium. For JIT application,
memory layout is less controlled and can result in truncations
otherwise.
Patch based on one by Olexa Bilaniuk!
llvm-svn: 328400
We were effectively overriding an explicit '.file' directive with info
for the assembler source. That shouldn't happen.
Fixes PR36636, really, even for .s files emitted by Clang.
Differential Revision: https://reviews.llvm.org/D44265
llvm-svn: 328208
It uses the MC framework and the tablegen matcher to do the
heavy lifting. Can handle both explicit and implicit locals
(-disable-wasm-explicit-locals). Comes with a small regression
test.
This is a first basic implementation that can parse most llvm .s
output and round-trips most instructions succesfully, but in order
to keep the commit small, does not address all issues.
There are a fair number of mismatches between what MC / assembly
matcher think a "CPU" should look like and what WASM provides,
some already have workarounds in this commit (e.g. the way it
deals with register operands) and some that require further work.
Some of that further work may involve changing what the
Disassembler outputs (and what s2wasm parses), so are probably
best left to followups.
Some known things missing:
- Many directives are ignored and not emitted.
- Vararg calls are parsed but extra args not emitted.
- Loop signatures are likely incorrect.
- $drop= is not emitted.
- Disassembler does not output SIMD types correctly, so assembler
can't test them.
Patch by Wouter van Oortmerssen
Differential Revision: https://reviews.llvm.org/D44329
llvm-svn: 328028
Summary:
We already emit relocations in this case when the "incremental linker
compatible" flag is set, but it turns out these relocations are also
required for /guard:cf. Now that we have two use cases for this
behavior, let's make it unconditional to try to keep things simple.
We never hit this problem in Clang because it always sets the
"incremental linker compatible" flag when targeting MSVC. However, LLD
LTO doesn't set this flag, so we'd get CFG failures at runtime when
using ThinLTO and /guard:cf. We probably don't want LLD LTO to set the
"incremental linker compatible" assembler flag, since this has nothing
to do with incremental linking, and we don't need to timestamp LTO
temporary objects.
Fixes PR36624.
Reviewers: inglorion, espindola, majnemer
Subscribers: mehdi_amini, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D44485
llvm-svn: 327557
The goal is to make the reciprocal throughput computation accessible through the
MCSchedModel interface. This is particularly important for llvm-mca because it
can only query the MCSchedModel interface.
No functional change intended.
Differential Revision: https://reviews.llvm.org/D44392
llvm-svn: 327420
The goal is to make the latency information accessible through the MCSchedModel
interface. This is particularly important for tools like llvm-mca that only have
access to the MCSchedModel API.
This partially fixes PR36676.
No functional change intended.
Differential Revision: https://reviews.llvm.org/D44383
llvm-svn: 327406
With this we only create an alias for @@@ once we know if it should
use @ or @@. This avoids last minutes renames and hacks to handle MS
names.
This only handles the ELF writer. LTO still has issues with @@@
aliases.
llvm-svn: 327160
This patch starts simplifying the handling of .symver.
For now it just moves the responsibility for creating an alias down to
the streamer. With that the asm streamer can pass a .symver unchanged,
which is nice since gas cannot parse "foo@bar = zed".
In a followup I hope to move the handling down to the writer so that
we don't need special hacks for avoiding breaking names with @@@ on
windows.
llvm-svn: 327101
We were effectively overriding an explicit '.file' directive with info
for the assembler source. That shouldn't happen.
Fixes PR36636.
Differential Revision: https://reviews.llvm.org/D44265
llvm-svn: 327073
Fixes the bug found by asan. Also XFAIL the new test for Darwin,
which is stuck on DWARF v2, and fix up other tests so they stop
failing on Windows.
llvm-svn: 326839
AsmToken is in the MCParser library, so we can't use its dump function from
MCAsmMacro in the MC library. Instead, just print the string, which we don't
need the MCParser library for.
llvm-svn: 326810
This adds some debug printing (gated behind the "asm-macros" debug flag) which
can help tracing complicated assembly macros.
Differential revision: https://reviews.llvm.org/D43937
llvm-svn: 326795
* Move printing from llvm-mc to the AsmToken class, so that it can be used elsewhere.
* Add 5 cases which were missed: BigNum, Comment, HashDirective, Space and
BackSlash, and remove the default case so that -Wswitch will catch this error
in future.
This is almost NFC, except for the fact that llvm-mc can now print those 5
tokens in -as-lex mode.
Differential revision: https://reviews.llvm.org/D43936
llvm-svn: 326794
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 326758
This is required in order to enable relocs to be validated
as they are read in.
Also update tests with new section ordering.
Differential Revision: https://reviews.llvm.org/D43940
llvm-svn: 326694
The original BinaryEncoding.md document used to specify that
these values were `varint7`, but the official spec lists them
explicitly as single byte values and not LEB.
A similar change for wabt is in flight:
https://github.com/WebAssembly/wabt/pull/782
Differential Revision: https://reviews.llvm.org/D43921
llvm-svn: 326454
Neither the linker nor the runtime need this information
anymore. We were originally using this to model BSS size
but the plan is now to use the segment metadata to allow
for BSS segments.
Differential Revision: https://reviews.llvm.org/D41366
llvm-svn: 326267
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
This is combination of two patches by Nicholas Wilson:
1. https://reviews.llvm.org/D41954
2. https://reviews.llvm.org/D42495
Along with a few local modifications:
- One change I made was to add the UNDEFINED bit to the binary format
to avoid the extra byte used when writing data symbols. Although this
bit is redundant for other symbols types (i.e. undefined can be
implied if a function or global is a wasm import)
- I prefer to be explicit and consistent and not have derived flags.
- Some field renaming.
- Some reverting of unrelated minor changes.
- No test output differences.
Differential Revision: https://reviews.llvm.org/D43147
llvm-svn: 325860
Extension to D12776, handle modulo by zero in the same way we handle divide by zero.
Differential Revision: https://reviews.llvm.org/D43631
llvm-svn: 325810
llvm-mc can crash when
there is cfi_startproc without cfi_end_proc:
.text
.globl foo
foo:
.cfi_startproc
Testcase shows the issue, patch fixes it.
Differential revision: https://reviews.llvm.org/D43456
llvm-svn: 325564
Add an explicit check before looking up symbol in SymbolIndices.
This was previously silently succeeding and returning zero for such
unnamed temporaries.
Differential Revision: https://reviews.llvm.org/D43365
llvm-svn: 325367
So that macros defined in inline assembly blocks are available to the
whole file.
This provides a consistent behavior with other assembly directives,
since equations for example are already preserved between inline
assembly blocks.
PR: 36110
Patch by Roger!
llvm-svn: 325139
Wouter van Oortmerssen