This pass was segfaulting when it ran into a non-intrinsic function
call. Function calls are not supported, so now instead of segfaulting,
we will get an assertion failure with a nice error message.
I'm not sure how to test this using lit.
llvm-svn: 190076
These were pretty straightforward instructions, with some assembly support
required for HLT.
The ARM assembler is keen to split the instruction mnemonic into a
(non-existent) 'H' instruction with the LT condition code. An exception for
HLT is needed.
HLT follows the same rules as BKPT when in IT blocks, so the special BKPT
hadling code has been adapted to handle HLT also.
Regression tests added including diagnostic tests for out of range immediates
and illegal condition codes, as well as negative tests for pre-ARMv8.
llvm-svn: 190053
Solution is not sufficient to prevent 'mov pc, lr' being emitted for jump table code.
Test case doesn't trigger the added functionality.
llvm-svn: 190047
This improves code generation for jump tables by avoiding the emission of "mov pc, lr" which could fool the processor into believing this is a return from a function causing mispredicts. The code generation logic for jump tables uses ADR to materialize the address of the jump target.
Patch by Daniel Stewart!
llvm-svn: 190043
In sparc, setjmp stores only the registers %fp, %sp, %i7 and %o7. longjmp restores
the stack, and the callee-saved registers (all local/in registers: %i0-%i7, %l0-%l7)
using the stored %fp and register windows. However, this does not guarantee that the longjmp
will restore the registers, as they were when the setjmp was called. This is because these
registers may be clobbered after returning from setjmp, but before calling longjmp.
This patch prevents the registers %i0-%i5, %l0-l7 to live across the setjmp call using the register mask.
llvm-svn: 190033
Fast register pressure tracking currently only takes effect during
bottom up scheduling. Forcing this is a bit faster and simpler for
targets that don't have many scheduling constraints and don't need
top-down scheduling.
llvm-svn: 190014
If the instruction window is < NumRegs/2, pressure tracking is not
likely to be effective. The scheduler has to process a very large
number of tiny blocks. We want this to be fast.
llvm-svn: 189991
Register pressure tracking is half the complexity of the
scheduler. It's useful to be able to turn it off for compile time and
performance comparisons.
llvm-svn: 189987
'Force' values in registers using the calling convention. Now, we only depend on
the calling convention and that the allocator performs copy coalescing.
llvm-svn: 189985
These instructions, such as vmul.f32, require the second source operand to
be in D0-D15 rather than the full D0-D31. When optimizing, make sure to
account for that by constraining the register class of a replacement virtual
register to be compatible with the virtual register(s) it's replacing.
I've been unsuccessful in creating a non-fragile regression test. This issue
was detected by the LLVM nightly test suite running on an A15 (Bullet).
PR17093: http://llvm.org/bugs/show_bug.cgi?id=17093
llvm-svn: 189972
This reverts commit r189886.
I found a corner case where this optimization is not valid:
Say we have a "linkonce_odr unnamed_addr" in two translation units:
* In TU 1 this optimization kicks in and makes it hidden.
* In TU 2 it gets const merged with a constant that is *not* unnamed_addr,
resulting in a non unnamed_addr constant with default visibility.
* The static linker rules for combining visibility them produce a hidden
symbol, which is incorrect from the point of view of the non unnamed_addr
constant.
The one place we can do this is when we know that the symbol is not used from
another TU in the same shared object, i.e., during LTO. I will move it there.
llvm-svn: 189954
Summary:
This is needed so we can use generic columnWidthUTF8 in clang-format on
win32 simultaneously with a separate system-dependent implementations of
isPrint/columnWidth in TextDiagnostic.cpp to avoid attempts to print Unicode
characters using narrow-character interfaces (which is not supported on Windows,
and we'll have to figure out how to handle this).
Reviewers: jordan_rose
Reviewed By: jordan_rose
CC: llvm-commits, klimek
Differential Revision: http://llvm-reviews.chandlerc.com/D1559
llvm-svn: 189952
For example, r189780's SparcISelLowering.cpp has the size 98304. It crashed clang to touch a null terminator on cygwin.
FIXME: It's not good to hardcode 4096 here. dwPageSize shows 4096.
llvm-svn: 189939
This was regression from r134829. When linking we have to be conservative. If
one of the symbols has a significant address, then the result should have it
too.
llvm-svn: 189935
"(icmp op i8 A, B)" is equivalent to "(icmp op i8 (A & 0xff), B)" as a
degenerate case. Allowing this as a "masked" comparison when analysing "(icmp)
&/| (icmp)" allows us to combine them in more cases.
rdar://problem/7625728
llvm-svn: 189931
Even in cases which aren't universally optimisable like "(A & B) != 0 && (A &
C) != 0", the masks can make one of the comparisons completely redundant. In
this case, since we've gone to the effort of spotting masked comparisons we
should combine them.
rdar://problem/7625728
llvm-svn: 189930
This reverts commit r189913.
Talked with Eric on IRC. I am going to XFAIL the failing test since it
is using what Eric described as "the member hack" which was needed on
that old GDB.
Sorry for the noise!
llvm-svn: 189914
Iterator of std::vector may be implemented as a raw pointer. In
this case begin iterators are rvalues and cannot be incremented.
For example, this is the case with STDCXX implementation of vector.
Patch by Konstantin Tokarev <annulen@yandex.ru>.
llvm-svn: 189911
Original message:
If a constant or a function has linkonce_odr linkage and unnamed_addr, mark
hidden. Being linkonce_odr guarantees that it is available in every dso that
needs it. Being a constant/function with unnamed_addr guarantees that the
copies don't have to be merged.
llvm-svn: 189886
- This aligns with how existing test suites end up wanting to use the local
config files, conceptually it makes sense to consider them to be inherited.
llvm-svn: 189885
Previously, the clang crash handling code would kick in and give a crash
report for these, even though they're not that sort of error.
rdar://14882264
llvm-svn: 189878
The reason that I am turning off this optimization is that there is an
additional case where a block can escape that has come up. Specifically, this
occurs when a block is used in a scope outside of its current scope.
This can cause a captured retainable object pointer whose life is preserved by
the objc_retainBlock to be deallocated before the block is invoked.
An example of the code needed to trigger the bug is:
----
\#import <Foundation/Foundation.h>
int main(int argc, const char * argv[]) {
void (^somethingToDoLater)();
{
NSObject *obj = [NSObject new];
somethingToDoLater = ^{
[obj self]; // Crashes here
};
}
NSLog(@"test.");
somethingToDoLater();
return 0;
}
----
In the next commit, I remove all the dead code that results from this.
Once I put in the fixing commit I will bring back the tests that I deleted in
this commit.
rdar://14802782.
rdar://14868830.
llvm-svn: 189869
This patch changes the default setting for the LateVectorization flag that controls where the loop-vectorizer is ran.
Perf gains:
SingleSource/Benchmarks/Shootout/matrix -37.33%
MultiSource/Benchmarks/PAQ8p/paq8p -22.83%
SingleSource/Benchmarks/Linpack/linpack-pc -16.22%
SingleSource/Benchmarks/Shootout-C++/ary3 -15.16%
MultiSource/Benchmarks/TSVC/NodeSplitting-flt/NodeSplitting-flt -10.34%
MultiSource/Benchmarks/TSVC/NodeSplitting-dbl/NodeSplitting-dbl -7.12%
Regressions:
SingleSource/Benchmarks/Misc/lowercase 15.10%
MultiSource/Benchmarks/TSVC/Equivalencing-flt/Equivalencing-flt 13.18%
SingleSource/Benchmarks/Shootout-C++/matrix 8.27%
SingleSource/Benchmarks/CoyoteBench/lpbench 7.30%
llvm-svn: 189858
This reverts commit r189648.
Fixes for the previously failing clang-side arm_neon_intrinsics test
cases will be checked in separately.
llvm-svn: 189841
This won't affect the kinds of hashes we test for as we actually
do hashing based on form and attribute. Change the fission-hash
testcase one last time to handle DW_AT_comp_dir.
llvm-svn: 189840
1) If the width of vectorization list candidate is bigger than vector reg width, we will break it down to fit the vector reg.
2) We do not vectorize the width which is not power of two.
The performance result shows it will help some spec benchmarks. mesa improved 6.97% and ammp improved 1.54%.
llvm-svn: 189830
For now this just handles simple comparisons of an ANDed value with zero.
The CC value provides enough information to do any comparison for a
2-bit mask, and some nonzero comparisons with more populated masks,
but that's all future work.
llvm-svn: 189819
Select condition shadow was being ignored resulting in false negatives.
This change OR-s sign-extended condition shadow into the result shadow.
llvm-svn: 189785
This changes the SelectionDAG nodes from ISD::INTRINSIC_W_CHAIN to
ISD::INTRINSIC_WO_CHAIN which enables easy lowering to equivalent SelectionDAG
nodes (e.g. __builtin_msa_sub_w -> ISD::SUB) in future patches since nodes
such as ISD::SUB do not have a chain.
It also corrects an obvious mistake, namely that the subtract intrinsics were
marked as being commutative.
As per a similar change in r189106
(http://llvm.org/viewvc/llvm-project?rev=189106&view=rev) there isn’t a new
testcase in this patch since the existing tests should test the intrinsics to
the same standard and the best I can do for a testcase would be a fragile
pass/maybe test of whether memory operations can (and do) cross the intrinsic.
llvm-svn: 189784
This changes the SelectionDAG nodes from ISD::INTRINSIC_W_CHAIN to
ISD::INTRINSIC_WO_CHAIN which enables easy lowering to equivalent SelectionDAG
nodes (e.g. __builtin_msa_fadd_w -> ISD::FADD) in future patches since nodes
such as ISD::FADD do not have a chain.
As per a similar change in r189106
(http://llvm.org/viewvc/llvm-project?rev=189106&view=rev) there isn’t a new
testcase in this patch since the existing tests should test the intrinsics to
the same standard and the best I can do for a testcase would be a fragile
pass/maybe test of whether memory operations can (and do) cross the intrinsic.
llvm-svn: 189782
What we really want is to enable Swift by default for *v7s triples (and there already seems to be some logic which attempts to do that). In that case the iOS version doesn't matter.
llvm-svn: 189763
This patch implements vector support for select instruction and adds specific vector instructions : shuffle and insertelement. (tests are also included)
and functions lle_X_memset, lle_X_memcpy added.
Done by Veselov, Yuri (mailto:Yuri.Veselov@intel.com)
llvm-svn: 189735
printing routine. This is made harder to see due to the surprising
formatting, inconsistent brace usage, and repeated conditions that all
test the same thing.
The only "consequence" of this bug is re-assigning 'str' to an empty
string when computing the error string for an error number of 0 in the
event of a non-GNU strerror_r routine. So, nothing to see here other
than cleanup. It did help me find PR17055 in clang-format though.
llvm-svn: 189734
Iterator of std::vector may be implemented as a raw pointer. In
this case ADL does not find the find() function in the std namespace.
For example, this is the case with STDCXX implementation of vector.
Patch by Konstantin Tokarev.
llvm-svn: 189733
part of getting started with LLVM.
The LLVM getting started document is in woeful need of attention. I may
get to some of this, but some random notes for folks interested:
1) We need to separate the getting started steps for folks who are
interested in the core LLVM libs and nothing else, folks interested
in a nifty C++ toolchain and nothing else, and folks interested in
both.
2) We should include documentation for both release archives, svn, and
git in equal portion, and we should document all of the various
repositories of interest: llvm, clang, clang-tools-extra,
compiler-rt, lld, libcxx, test-suite.
3) We should document the CMake build. We should probably document the
CMake build first, and give a fall-back set of docs for the Makefile
build for the use cases where that is still the preferred solution.
This would more closely match the use cases that folks in the open
source community are likely to have, and would remove a point of
discrepancy between Linux, Windows, and Mac instructions.
4) Probably a ton of other modernization stuff that I've not thought of
here.
Anyways, if anyone at all is interested, please help clean up this
document. It is much needed.
llvm-svn: 189732
don't exist in libc. This is really not the right way to solve this problem;
but it's not clear to me at this time exactly what is the right way.
If we create stubs here, they will cause link errors because these functions
do not exist in libc.
llvm-svn: 189727
The existing code missed some edge cases when e.g. we're going to emit sqrtf but
only the availability of sqrt was checked. This happens on odd platforms like
windows.
llvm-svn: 189724
There was one case that we could hit a DebugValue where I didn't think
to check. DebugValues are evil. No checkinable test case, sorry. It's
an obvious fix.
llvm-svn: 189717
Here are a few miscellaneous things to tidy up the PPC64 fast-isel
implementation. I corrected a couple of commentary lapses, and added
documentation of future opportunities. I also implemented
TargetMaterializeAlloca, which I somehow forgot when I split up the
original huge patch.
Finally, I decided to delete SelectCmp. I hadn't previously hooked it
in to TargetSelectInstruction(), and when I did I realized it wasn't
serving any useful purpose. This is only useful for compares that
don't feed a branch in the same block, and to handle that we would
have to have logic to interpret i1 as a condition register. This
could probably be done, but would require Unseemly Hackery, and
honestly does not seem worth the hassle.
This ends the current patch series.
llvm-svn: 189715
This is the last substantive patch I'm planning for fast-isel in the
near future, adding fast selection of integer truncates. There are
certainly more things that can be improved (many of which are called
out in FIXMEs), but for now we are catching most of the important
cases.
I'll document some of the remaining work in a cleanup patch shortly.
llvm-svn: 189706
implementation files. While doc generation systems don't need this,
humans do benefit from it. Not everyone reads all code through doxygen.
llvm-svn: 189704
This patch adds fast-isel support for calls (but not intrinsic calls
or varargs calls). It also removes a badly-formed assert. There are
some new tests just for calls, and also for folding loads into
arguments on calls to avoid extra extends.
llvm-svn: 189701
- We do some nasty things w.r.t. installing or overriding signal handlers in
order to improve our crash recovery support or interaction with crash
reporting software, and those things are not necessarily appropriate when
LLVM is being linked into a client application that has its own ideas about
how to do things. This gives those clients a way to disable that handling at
build time.
- Currently, the code this guards is all Apple specific, but other platforms
might have the same concerns so I went for a more generic configure
name. Someone who is more familiar with library embedding on Windows can
handle choosing which of the Windows/Signals.inc behaviors might make sense
to go under this flag.
- This also fixes the proper autoconf'ing of ENABLE_BACKTRACES. The code
expects it to be undefined when disabled, but the autoconf check was just
defining it to 0.
llvm-svn: 189694
has hard float, when you compile the mips32 code you have to make sure
that it knows to compile any mips32 routines as hard float. I need to clean
up the way mips16 hard float is specified but I need to first think through
all the details. Mips16 always has a form of soft float, the difference being
whether the underlying hardware has floating point. So it's not really
necessary to pass the -soft-float to llvm since soft-float is always true
for mips16 by virtue of the fact that it will not register floating point
registers. By using this fact, I can simplify the way this is all handled.
llvm-svn: 189690
Yet another chunk of fast-isel code. This one handles various
conversions involving floating-point. (It also includes some
miscellaneous handling throughout the back end for LWA_32 and LWAX_32
that should have been part of the load-store patch.)
llvm-svn: 189677
PR17026. Also avoid undefined shifts and shift amounts larger than 64 bits
(those are always undef because we can't represent integer types that large).
llvm-svn: 189672
Created SUPressureDiffs array to hold the per node PDiff computed during DAG building.
Added a getUpwardPressureDelta API that will soon replace the old
one. Compute PressureDelta here from the precomputed PressureDiffs.
Updating for liveness will come next.
llvm-svn: 189640
This is the next big chunk of fast-isel code. The primary purpose is
to implement selection of loads and stores, but there is a lot of
drag-along to support this. The common code to analyze addresses for
both loads and stores is substantial. It's also necessary to add the
materialization code for global values.
Related to load-store processing is the code to fold loads into
integer extends, since otherwise we generate lots of redundant
instructions. We also need to add some overrides to some FastEmit
routines to ensure we don't assign GPR 0 to a virtual register when
this would change the meaning of an instruction.
I added handling selection of a few binary arithmetic instructions, to
enable committing some test cases I wrote a while back.
Finally, ap couple of miscellaneous changes:
* I cleaned up some poor style from a previous patch in
PPCISelLowering.cpp, pointed out by David Blaikie.
* I enlarged the Addr.Offset field to avoid sign problems with 32-bit
offsets.
llvm-svn: 189636
This is a re-commit of r189442; I'll follow up with clang changes.
The previous default was almost, but not quite enough digits to
represent a floating-point value in a manner which preserves the
representation when it's read back in. The larger default is much
less confusing.
I spent some time looking into printing exactly the right number of
digits if a precision isn't specified, but it's kind of complicated,
and I'm not really sure I understand what APFloat::toString is supposed
to output for FormatPrecision != 0 (or maybe the current API specification
is just silly, not sure which). I have a WIP patch if anyone is interested.
llvm-svn: 189624
createClassType, createStructType, createUnionType, createEnumerationType,
and createForwardDecl will retain a type when created with a unique identifier,
to make sure they are treated as used even when all uses are replaced with
the identifiers.
Use TrackingVH<MDNode> instead of MDNode in AllRetainTypes, since the created
node can later be updated.
The change will be tested when clients of DIBuilder start to pass in non-empty
unique identifier.
llvm-svn: 189621
In addition to recognizing when the multiply's second argument is
coming from an explicit VDUPLANE, also look for a plain scalar
f32 reference and reference it via the corresponding vector
lane.
rdar://14870054
llvm-svn: 189619
include/llvm/Support/UnicodeCharRanges.h:56:5: error:
use of this statement in a constexpr constructor is a C++1y extension
[-Werror,-Wc++1y-extensions]
assert(rangesAreValid());
^
llvm-svn: 189599
Summary:
Made UnicodeCharSet a class, perform validity checking inside its
constructor instead of each isCharInSet call, use std::binary_search instead of
own implementation.
This patch comes with a necessary change in clang (sent separately).
Reviewers: jordan_rose, klimek
Reviewed By: klimek
CC: cfe-commits, rsmith
Differential Revision: http://llvm-reviews.chandlerc.com/D1534
llvm-svn: 189582
Revert unintentional commit (of an unreviewed change).
Original commit message:
Add getUnrollingPreferences to TTI
Allow targets to customize the default behavior of the generic loop unrolling
transformation. This will be used by the PowerPC backend when targeting the A2
core (which is in-order with a deep pipeline), and using more aggressive
defaults is important.
llvm-svn: 189566
Allow targets to customize the default behavior of the generic loop unrolling
transformation. This will be used by the PowerPC backend when targeting the A2
core (which is in-order with a deep pipeline), and using more aggressive
defaults is important.
llvm-svn: 189565
This uses the TargetSubtargetInfo::useAA() function to control the defaults of
the -combiner-alias-analysis and -combiner-global-alias-analysis options.
llvm-svn: 189564
There are several optional (off-by-default) features in CodeGen that can make
use of alias analysis. These features are important for generating code for
some kinds of cores (for example the (in-order) PPC A2 core). This adds a
useAA() function to TargetSubtargetInfo to allow these features to be enabled
by default on a per-subtarget basis.
Here is the first use of this function: To control the default of the
-enable-aa-sched-mi feature.
llvm-svn: 189563
- At least on OS X, it is important for correct behavior of /bin/[ that argv[0]
is passed as written, and not as the full executable path.
llvm-svn: 189559
1. They are a kind of cannonicalization.
2. The performance measurements show that it is better to keep them in.
There should be no functional change if you are not enabling the LateVectorization mode.
llvm-svn: 189539
When unrolling is disabled in the pass manager, the loop vectorizer should also
not unroll loops. This will allow the -fno-unroll-loops option in Clang to
behave as expected (even for vectorizable loops). The loop vectorizer's
-force-vector-unroll option will (continue to) override the pass-manager
setting (including -force-vector-unroll=0 to force use of the internal
auto-selection logic).
In order to test this, I added a flag to opt (-disable-loop-unrolling) to force
disable unrolling through opt (the analog of -fno-unroll-loops in Clang). Also,
this fixes a small bug in opt where the loop vectorizer was enabled only after
the pass manager populated the queue of passes (the global_alias.ll test needed
a slight update to the RUN line as a result of this fix).
llvm-svn: 189499
with a debug build) with this buggy .indirect_symbol directive usage:
% cat test.s
x: .indirect_symbol _y
The assertion is because it is trying to get the symbol index for the
symbol _y when it is writing out the indirect symbol table. This line of
code in MachObjectWriter::WriteObject() :
Write32(Asm.getSymbolData(*it->Symbol).getIndex());
And while there is a symbol _y it does not have any getSymbolData set which
is only done in MachObjectWriter::BindIndirectSymbols() for pointer sections
or stub sections. I added a check and an error in there to catch this in case
something slips through.
But to get a better error the parser should detect when a .indirect_symbol
directive is used and it is not in a pointer section or stub section. To make
that work I moved the handling of the indirect symbol out of the target
independent AsmParser code into the DarwinAsmParser code that can check
for the proper Mach-O section types.
rdar://14825505
llvm-svn: 189497
Fix a few things in one swoop.
# Add some negative tests.
# Fix some formatting issues.
# Add some missing IsThumb / ARMv8
# Fix some outs / ins mistakes.
llvm-svn: 189490
This is just enough to get "llvm-ranlib foo.a" working and tested. Making
llvm-ranlib a symbolic link to llvm-ar doesn't work so well with llvm's option
parsing, but ar's option parsing is mostly custom anyway.
This patch also removes the -X32_64 option. Looks like it was just added in
r10297 as part of implementing the current command line parsing. I can add it
back (with a test) if someone really has AIX portability problems without it.
llvm-svn: 189489
The usual default of "dmb ish" (inner-shareable) isn't even a valid instruction
on v6M or v7M (well, it does the same thing but software is strongly
discouraged from using it) so we should emit a full-system barrier there.
llvm-svn: 189483
The vqdmlal and vqdmlls instructions are really just a fused pair consisting of
a vqdmull.sN and a vqadd.sN. This adds patterns to LLVM so that we can switch
Clang's CodeGen over to generating these instead of the special vqdmlal
intrinsics.
llvm-svn: 189480
These intrinsics are legalized to V(ALL|ANY)_(NON)?ZERO nodes,
are matched as SN?Z_[BHWDV]_PSEUDO pseudo's, and emitted as
a branch/mov sequence to evaluate to 0 or 1.
Note: The resulting code is sub-optimal since it doesnt seem to be possible
to feed the result of an intrinsic directly into a brcond. At the moment
it uses (SETCC (VALL_ZERO $ws), 0, SETEQ) and similar which unnecessarily
evaluates the boolean twice.
llvm-svn: 189478
For now just handles simple comparisons of an ANDed value with zero.
The CC value provides enough information to do any comparison for a
2-bit mask, and some nonzero comparisons with more populated masks,
but that's all future work.
llvm-svn: 189469
The MSA control registers have been added as reserved registers,
and are only used via ISD::Copy(To|From)Reg. The intrinsics are lowered
into these nodes.
llvm-svn: 189468
The previous default was almost, but not quite enough digits to
represent a floating-point value in a manner which preserves the
representation when it's read back in. The larger default is much
less confusing.
I spent some time looking into printing exactly the right number of
digits if a precision isn't specified, but it's kind of complicated,
and I'm not really sure I understand what APFloat::toString is supposed
to output for FormatPrecision != 0 (or maybe the current API specification
is just silly, not sure which). I have a WIP patch if anyone is interested.
llvm-svn: 189442
This adds the msbuild integration files to the install, provides batch scripts
for (un)installing it in a convenient way, and hooks up the nsis installer to
run those scripts.
Differential Revision: http://llvm-reviews.chandlerc.com/D1537
llvm-svn: 189434
The problem with having DefaultSlabAllocator being a global static is that it is undefined if BumpPtrAllocator
will be usable during global initialization because it is not guaranteed that DefaultSlabAllocator will be
initialized before BumpPtrAllocator is created and used.
llvm-svn: 189433
when we can. Migrate from using blocks when we're adding just a
single attribute and floating point values are an unsigned, not signed,
bag of bits.
Update all test cases accordingly.
llvm-svn: 189419
Tom Stellard