The saturation instructions appeared in v6T2, with DSP extensions, but they
were being accepted / generated on any, with the new introduction of the
saturation detection in the back-end. This commit restricts the usage to
DSP-enable only cores.
Fixes PR28607.
llvm-svn: 276701
new instruction to ARM and AArch64 targets and several system registers.
Patch by: Roger Ferrer Ibanez and Oliver Stannard
Differential Revision: http://reviews.llvm.org/D20282
llvm-svn: 271670
This patch was originally committed as r257884, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
llvm-svn: 258682
This was originally committed as r255762, but reverted as it broke windows
bots. Re-commitiing the exact same patch, as the underlying cause was fixed by
r258677.
ARMv8.2-A adds 16-bit floating point versions of all existing VFP
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
The assembly for these instructions uses S registers (AArch32 does not
have H registers), but the instructions have ".f16" type specifiers
rather than ".f32" or ".f64". The top 16 bits of each source register
are ignored, and the top 16 bits of the destination register are set to
zero.
These instructions are mostly the same as the 32- and 64-bit versions,
but they use coprocessor 9 rather than 10 and 11.
Two new instructions, VMOVX and VINS, have been added to allow packing
and extracting two 16-bit floats stored in the top and bottom halves of
an S register.
New fixup kinds have been added for the PC-relative load and store
instructions, but no ELF relocations have been added as they have a
range of 512 bytes.
Differential Revision: http://reviews.llvm.org/D15038
llvm-svn: 258678
# The first commit's message is:
Revert "[ARM] Add DSP build attribute and extension targeting"
This reverts commit b11cc50c0b4a7c8cdb628abc50b7dc226ff583dc.
# This is the 2nd commit message:
Revert "[ARM] Add new system registers to ARMv8-M Baseline/Mainline"
This reverts commit 837d08454e3e5beb8581951ac26b22fa07df3cd5.
llvm-svn: 257916
ARMv8.2-A adds 16-bit floating point versions of all existing SIMD
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
Note that VFP without SIMD is not a valid combination for any version of
ARMv8-A, but I have ensured that these instructions all depend on both
FeatureNEON and FeatureFullFP16 for consistency.
Differential Revision: http://reviews.llvm.org/D15039
llvm-svn: 255764
ARMv8.2-A adds 16-bit floating point versions of all existing VFP
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
The assembly for these instructions uses S registers (AArch32 does not
have H registers), but the instructions have ".f16" type specifiers
rather than ".f32" or ".f64". The top 16 bits of each source register
are ignored, and the top 16 bits of the destination register are set to
zero.
These instructions are mostly the same as the 32- and 64-bit versions,
but they use coprocessor 9 rather than 10 and 11.
Two new instructions, VMOVX and VINS, have been added to allow packing
and extracting two 16-bit floats stored in the top and bottom halves of
an S register.
New fixup kinds have been added for the PC-relative load and store
instructions, but no ELF relocations have been added as they have a
range of 512 bytes.
Differential Revision: http://reviews.llvm.org/D15038
llvm-svn: 255762
Summary:
This patch handles assembly and disassembly, but not codegen, as of yet.
Additionally, it fixes a bug whereby SP and PC as shifted-reg operands
were treated as predictable in ARMv7 Thumb; and it enables the tests
for invalid and unpredictable instructions to run on both ARMv7 and ARMv8.
Reviewers: jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14141
llvm-svn: 251516
The "|&" operator isn't POSIX, so it can fail depending on the host's
default shell. Avoid it.
There were also a couple of places that did "2>1", but this creates a
file called "1". They clearly meant "2>&1".
llvm-svn: 233309
Certain ARM instructions accept 32-bit immediate operands encoded as a 8-bit
integer value (0-255) and a 4-bit rotation (0-30, even). Current ARM assembly
syntax support in LLVM allows the decoded (32-bit) immediate to be specified
as a single immediate operand for such instructions:
mov r0, #4278190080
The ARMARM defines an extended assembly syntax allowing the encoding to be made
more explicit, as in:
mov r0, #255, #8 ; (same 32-bit value as above)
The behaviour of the two instructions can be different w.r.t flags, which is
documented under "Modified immediate constants" in ARMARM. This patch enables
support for this extended syntax at the MC layer.
llvm-svn: 223113
Add checkDecodedInstruction for post-decode checking of instructions, to catch
the corner cases like HVC that don't fit into the general pattern. Needed to
check for an invalid condition field in instruction encoding despite HVC not
taking a predicate.
Patch by Matthew Wahab.
Change-Id: I48e28de981d7a9e43569594da3c45fb478b4f795
llvm-svn: 222992
Some ARM FPUs only have 16 double-precision registers, rather than the
normal 32. LLVM represents this with the D16 target feature. This is
currently used by CodeGen to avoid using high registers when they are
not available, but the assembler and disassembler do not.
I fix this in the assmebler and disassembler rather than the
InstrInfo.td files, as the latter would require a large number of
changes everywhere one of the floating-point instructions is referenced
in the backend. This solution is similar to the one used for
co-processor numbers and MSR masks.
llvm-svn: 221341
This CPU definition is redundant. The Cortex-A9 is defined as
supporting multiprocessing extensions. Remove its definition and
update appropriate tests.
LLVM defines both a cortex-a9 CPU and a cortex-a9-mp CPU. The only
difference between the two CPU definitions in ARM.td is that
cortex-a9-mp contains the feature FeatureMP for multiprocessing
extensions.
This is redundant since the Cortex-A9 is defined as having
multiprocessing extensions in the TRMs. armcc also defines the
Cortex-A9 as having multiprocessing extensions by default.
Change-Id: Ifcadaa6c322be0a33d9d2a39cfdd7da1d75981a7
llvm-svn: 221166
Currently, the ARM disassembler will disassemble the Thumb2 memory hint
instructions (PLD, PLDW and PLI), even for targets which do not have
these instructions. This patch adds the required checks to the
disassmebler.
llvm-svn: 220472
This patch implements a few changes related to the Thumb2 M-class MSR instruction:
* better handling of unpredictable encodings,
* recognition of the _g and _nzcvqg variants by the asm parser only if the DSP
extension is available, preferred output of MSR APSR moves with the _<bits>
suffix for v7-M.
Patch by Petr Pavlu.
llvm-svn: 216874
These are system-only instructions for CPUs with virtualization
extensions, allowing a hypervisor easy access to all of the various
different AArch32 registers.
rdar://problem/17861345
llvm-svn: 215700
Note: The current code in DecodeMSRMask() rejects the unpredictable A/R MSR mask '0000' with Fail. The code in the patch follows this style and rejects unpredictable M-class MSR masks also with Fail (instead of SoftFail). If SoftFail is preferred in this case then additional changes to ARMInstPrinter (to print non-symbolic masks) and ARMAsmParser (to parse non-symbolic masks) will be needed.
Patch by Petr Pavlu!
llvm-svn: 214505
Previously we would always print the offset as decimal, regardless of
the formatting requested. Now we use the formatImm() helper so the value
is printed as the client (LLDB in the motivating example) requested.
Before:
ldr.w r8, [sp, #180] @ always
After:
ldr.w r8, [sp, #0xb4] @ when printing hex immediates
ldr.w r8, [sp, #0180] @ when printing decimal immediates
rdar://17237103
llvm-svn: 210701
Previously there was a separate mode entirely (--hdis vs.
--disassemble). It makes a bit more sense for the immediate printing
style to be a flag for --disassmeble rather than an entirely different
thing.
llvm-svn: 210700
The UDF instruction is a reserved undefined instruction space. The assembler
mnemonic was introduced with ARM ARM rev C.a. The instruction is not predicated
and the immediate constant is ignored by the CPU. Add support for the three
encodings for this instruction.
The changes to the invalid instruction test is due to the fact that the invalid
instructions actually overlap with the undefined instruction. Introduction of
the new instruction results in a partial decode as an undefined sequence. Drop
the tests as they are invalid instruction patterns anyways.
llvm-svn: 208751
The implicit immediate 0 forms are assembly aliases, not distinct instruction
encodings. Fix the initial implementation introduced in r198914 to an alias to
avoid two separate instruction definitions for the same encoding.
An InstAlias is insufficient in this case as the necessary due to the need to
add a new additional operand for the implicit zero. By using the AsmPsuedoInst,
fall back to the C++ code to transform the instruction to the equivalent
_POST_IMM form, inserting the additional implicit immediate 0.
llvm-svn: 199032
The disassembler would no longer be able to disambiguage between the two
variants (explicit immediate #0 vs implicit, omitted #0) for the ldrt, strt,
ldrbt, strbt mnemonics as both versions indicated the disassembler routine.
llvm-svn: 198944
The set of circumstances where the writeback register is allowed to be in the
list of registers is rather baroque, but I think this implements them all on
the assembly parsing side.
For disassembly, we still warn about an ARM-mode LDM even if the architecture
revision is < v7 (the required architecture information isn't available). It's
a silly instruction anyway, so hopefully no-one will mind.
rdar://problem/15223374
llvm-svn: 193185
These were pretty straightforward instructions, with some assembly support
required for HLT.
The ARM assembler is keen to split the instruction mnemonic into a
(non-existent) 'H' instruction with the LT condition code. An exception for
HLT is needed.
HLT follows the same rules as BKPT when in IT blocks, so the special BKPT
hadling code has been adapted to handle HLT also.
Regression tests added including diagnostic tests for out of range immediates
and illegal condition codes, as well as negative tests for pre-ARMv8.
llvm-svn: 190053
Renato Golin