r282428 added the MipsOptimizePICCall as an opt-in pass that can be
skipped when using the -opt-bisect-limit option. However, this pass is
needed because it generates code that conforms to the o32 ABI
specification by using the $t9 register for PIC calls with JALR
instructions.
This bug was exposed by the fact that skipFunction() also checks for
the "optnone" attribute. This caused functions with that attribute to
break the requirements of the o32 ABI.
llvm-svn: 285305
Use mask and negate for legalization of i1 source type with SIGN_EXTEND_INREG.
With the mask, this should be no worse than 2 shifts. The mask can be eliminated
in some cases, so that should be better than 2 shifts.
This change exposed some missing folds related to negation:
https://reviews.llvm.org/rL284239https://reviews.llvm.org/rL284395
There may be others, so please let me know if you see any regressions.
Differential Revision: https://reviews.llvm.org/D25485
llvm-svn: 284611
Summary:
Instead of instantiating the MipsFastISel class and checking if the
target is supported in the overriden methods, we should perform that
check before creating the class. This allows us to enable FastISel *only*
for targets that truly support it, ie. MIPS32 to MIPS32R5.
Reviewers: sdardis
Subscribers: ehostunreach, llvm-commits
Differential Revision: https://reviews.llvm.org/D24824
llvm-svn: 284475
Retrying after upstream changes.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
This test appears to work but no longer exhibits the spill behavior.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 284151
Treat soft-float as unsupported for fast-isel. Additionally, ensure we check
that lowering f32 arguments also considers the case of soft-float mode.
Reviewers: ehostunreach, vkalintiris, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D24505
llvm-svn: 283209
This avoids llc using the hosts OS/vendor as defaults and triggering
unwanted behaviour in the tests. This should deal with the buildbot
breakages on windows after r283140.
llvm-svn: 283149
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
This test appears to work but no longer exhibits the spill
behavior.
Reviewers: arsenm, hfinkel, tstellarAMD, nhaehnle, jyknight
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 282600
Disable tail calls while the remaining bugs are fixed. Enable only for tests.
Reviewers: vkalintiris
Differential Review: https://reviews.llvm.org/D24912
llvm-svn: 282487
The postRA scheduler performs alias analysis to determine if stores and loads
can moved past each other. When a function has more arguments than argument
registers for the calling convention used, excess arguments are spilled onto the
stack. LLVM by default assumes that argument slots are immutable, unless the
function contains a tail call. Without the knowledge of that a function contains
a tail call site, stores and loads to fixed stack slots may be re-ordered
causing the out-going arguments to clobber the incoming arguments before the
incoming arguments are supposed to be dead.
Reviewers: vkalintiris
Differential Review: https://reviews.llvm.org/D24077
llvm-svn: 282063
As part of this effort, remove MipsFCmp nodes and use tablegen
patterns rather than custom lowering through C++.
Unexpectedly, this improves codesize for microMIPS as previous floating
point setcc expansions would materialize 0 and 1 into GPRs before using
the relevant mov[tf].[sd] instruction. Now $zero is used directly.
Reviewers: dsanders, vkalintiris, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D23118
llvm-svn: 281022
Summary:
The o32 ABI doesn't not support the TImode helpers. For the time being,
disable just the shift libcalls as they break recursive builds on MIPS.
Reviewers: sdardis
Subscribers: llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D24259
llvm-svn: 280798
LLVM PR/29052 highlighted that FastISel for MIPS attempted to lower
arguments assuming that it was using the paired 32bit registers to
perform operations for f64. This mode of operation is not supported
for MIPSR6.
This patch resolves the reported issue by adding additional checks
for unsupported floating point unit configuration.
Thanks to mike.k for reporting this issue!
Reviewers: seanbruno, vkalintiris
Differential Review: https://reviews.llvm.org/D23795
llvm-svn: 280706
This scheduler describes a processor which covers all MIPS ISAs based
around the interAptiv and P5600 timings.
Reviewers: vkalintiris, dsanders
Differential Revision: https://reviews.llvm.org/D23551
llvm-svn: 280374
Extend instruction definitions from nearly all ISAs to include
appropriate instruction itineraries. Change MIPS16s gp prologue
generation to use real instructions instead of using a pseudo
instruction.
Reviewers: dsanders, vkalintiris
Differential Review: https://reviews.llvm.org/D23548
llvm-svn: 279623
The ppc64 multistage bot fails on this.
This reverts commit r279124.
Also Revert "CodeGen: Add/Factor out LiveRegUnits class; NFCI" because it depends on the previous change
This reverts commit r279171.
llvm-svn: 279199
Re-apply r276044 with off-by-1 instruction fix for the reload placement.
This is a variant of scavengeRegister() that works for
enterBasicBlockEnd()/backward(). The benefit of the backward mode is
that it is not affected by incomplete kill flags.
This patch also changes
PrologEpilogInserter::doScavengeFrameVirtualRegs() to use the register
scavenger in backwards mode.
Differential Revision: http://reviews.llvm.org/D21885
llvm-svn: 279124
r277708 enabled tails calls for MIPS but used the 'jr' instruction when the
jump target was held in a register. For MIPSR6, 'jalr $zero, $reg' should
have been used. Additionally, add missing patterns for external and global
symbols for tail calls.
Reviewers: dsanders, vkalintiris
Differential Review: https://reviews.llvm.org/D23301
llvm-svn: 279064
Check both operands for use of the $zero register which cannot be used with
a compact branch instruction.
Reviewers: dsanders, vkalintris
Differential Review: https://reviews.llvm.org/D23547
llvm-svn: 278824
Enable tail calls by default for (micro)MIPS(64).
microMIPS is slightly more tricky than doing it for MIPS(R6) or microMIPSR6.
microMIPS has two instruction encodings: 16bit and 32bit along with some
restrictions on the size of the instruction that can fill the delay slot.
For safe tail calls for microMIPS, the delay slot filler attempts to find
a correct size instruction for the delay slot of TAILCALL pseudos.
Reviewers: dsanders, vkalintris
Subscribers: jfb, dsanders, sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D21138
llvm-svn: 277708
Summary:
Allocating an AFGR64 shadows two GPR32's instead of just one.
This fixes an LNT regression detected by our internal buildbots.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D23012
llvm-svn: 277348
Summary:
Implements fastLowerArguments() to avoid the need to fall back on
SelectionDAG for 0-4 argument functions that don't do tricky things like
passing double in a pair of i32's.
This allows us to move all except one test to -fast-isel-abort=3. The
remaining one has function prototypes of the form 'i32 (i32, double, double)'
which requires floats to be passed in GPR's.
The previous commit had an uninitialized variable that caused the incoming
argument region to have undefined size. This has been fixed.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D22680
llvm-svn: 277136
Summary:
Implements fastLowerArguments() to avoid the need to fall back on
SelectionDAG for 0-4 argument functions that don't do tricky things like
passing double in a pair of i32's.
This allows us to move all except one test to -fast-isel-abort=3. The
remaining one has function prototypes of the form 'i32 (i32, double, double)'
which requires floats to be passed in GPR's.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D22680
llvm-svn: 276982
MIPS64R6 compact branch support. As the MIPS LLVM backend uses distinct
MachineInstrs for certain 32 and 64 bit instructions (e.g. BEQ & BEQ64) that
map to the same instruction, extend compact branch support for the
corresponding 64bit branches.
Reviewers: dsanders
Differential Revision: https://reviews.llvm.org/D20164
llvm-svn: 276739
Avoid MipsAnalyzeImmediate usage if the constant fits in an 32-bit
integer. This allows us to generate the same instructions for the
materialization of the same constants regardless the width of their
type.
Patch by: Vasileios Kalintiris
Contributions by: Simon Dardis
Reviewers: Daniel Sanders
Differential Review: https://reviews.llvm.org/D21689
llvm-svn: 276628
Reverting this commit for now as it seems to be causing failures on
test-suite tests on the clang-ppc64le-linux-lnt bot.
This reverts commit r276044.
llvm-svn: 276068
This is a variant of scavengeRegister() that works for
enterBasicBlockEnd()/backward(). The benefit of the backward mode is
that it is not affected by incomplete kill flags.
This patch also changes
PrologEpilogInserter::doScavengeFrameVirtualRegs() to use the register
scavenger in backwards mode.
Differential Revision: http://reviews.llvm.org/D21885
llvm-svn: 276044
Summary:
N32 and N64 follow the standard ELF conventions (.L) whereas O32 uses its own
($).
This fixes the majority of object differences between -fintegrated-as and
-fno-integrated-as.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D22412
llvm-svn: 275967
When SelectionDAGISel transforms a node representing an inline asm
block, memory constraint information is not preserved. This can cause
constraints to be broken when a memory offset is of the form:
offset + frame index
when the frame is resolved.
By propagating the constraints all the way to the backend, targets can
enforce memory operands of inline assembly to conform to their constraints.
For MIPSR6, some instructions had their offsets reduced to 9 bits from
16 bits such as ll/sc. This becomes problematic when using inline assembly
to perform atomic operations, as an offset can generated that is too big to
encode in the instruction.
Reviewers: dsanders, vkalintris
Differential Review: https://reviews.llvm.org/D21615
llvm-svn: 275786
Summary:
It was recently discovered that, for Mips's SelectionDAGISel subclasses,
all optimization levels caused SelectionDAGISel to behave like -O2.
This change adds the necessary plumbing to initialize the optimization level.
Reviewers: andrew.w.kaylor
Subscribers: andrew.w.kaylor, sdardis, dean, llvm-commits, vradosavljevic, petarj, qcolombet, probinson, dsanders
Differential Revision: https://reviews.llvm.org/D14900
llvm-svn: 275410
Tail merge was making the assumption that a layout successor or
predecessor was always a cfg successor/predecessor. Remove that
assumption. Changes to tests are necessary because the errant cfg edges
were preventing optimizations.
llvm-svn: 273700
Summary:
The backend has no reason to behave like a driver and should generally do
as it's told (and error out if it can't) instead of trying to figure out
what the API user meant. The default ABI is still derived from the arch
component as a concession to backwards compatibility.
API-users that previously passed an explicit CPU and a triple that was
inconsistent with the CPU (e.g. mips-linux-gnu and mips64r2) may get a
different ABI to what they got before. However, it's expected that there
are no such users on the basis that CodeGen has been asserting that the
triple is consistent with the selected ABI for several releases. API-users
that were consistent or passed '' or 'generic' as the CPU will see no
difference.
Reviewers: sdardis, rafael
Subscribers: rafael, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21466
llvm-svn: 273557
Summary:
JR is an alias of JALR with $rd=0 in the R6 ISA. Also, this fixes recursive
builds in MIPS32R6.
Reviewers: dsanders, sdardis
Subscribers: jfb, dschuff, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21370
llvm-svn: 273085
Summary:
[ls][bh] and [ls][bh]u cannot use sp-relative addresses and must therefore
lower frameindex nodes such that there is a copy to a CPU16Regs register. This
is now done consistently using a separate addressing mode that does not
permit frameindex nodes.
As part of this I've had to remove an optimization that reduced the number of
instructions needed to work around the lack of sp-relative addresses on [ls][bh]
and [ls][bh]u. This optimization used one of the eight CPU16Regs registers as
a copy of the stack pointer and it's implementation was the root cause of many
of the register vs register class mismatches.
lw/sw can use sp-relative addresses but we ought to ensure that we use the
correct version of lw/sw internally for things like IAS. This is not currently
the case and this change does not fix this. However, this change does clean it
up sufficiently well to fix the machine verifier failures.
Also removed irrelevant functions from stchar.ll.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21062
llvm-svn: 272882
Summary:
The Mips implementation only covers the feature bits described by the ELF
e_flags so far. Mips stores additional feature bits such as MSA in the
.MIPS.abiflags section.
Also fixed a small bug this revealed where microMIPS wouldn't add the
EF_MIPS_MICROMIPS flag when using -filetype=obj.
Reviewers: echristo, rafael
Subscribers: rafael, mehdi_amini, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21125
llvm-svn: 272880
Instead of always using addu to adjust the stack pointer when the
size out is of the range of an addiu instruction, use subu so that
a smaller constant can be generated.
This can give savings of ~3 instructions whenever a function has a
a stack frame whose size is out of range of an addiu instruction.
This change may break some naive stack unwinders.
Partially resolves PR/26291.
Thanks to David Chisnall for reporting the issue.
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D21321
llvm-svn: 272666
PR27458 highlights that the MIPS backend does not have well formed
MIR for atomic operations (among other errors).
This patch adds expands and corrects the LL/SC descriptions and uses
for MIPS(64).
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D19719
llvm-svn: 272655
Itineraries for some pre MIPSR6 and EVA instructions. Some pseudo expanded
instructions are marked as having no scheduling info.
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D20418
llvm-svn: 272648
Summary:
The machine verifier reports 'Explicit operand marked as def' when it is
manually specified even though it agrees with the operand info.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21065
llvm-svn: 272646
Summary:
N32 support will follow in a later patch since the symbol version of 'la'
incorrectly believes N32 to have 64-bit pointers and rejects it early.
This fixes the three incorrectly expanded 'la' macros found in bionic.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D20820
llvm-svn: 271644
beqc and bnec cannot have $rs == $rt. Inhibit compact branch creation
if that would occur.
Reviewers: vkalintiris, dsanders
Differential Revision: http://reviews.llvm.org/D20624
llvm-svn: 271260
Restrict the creation of compact branches so that they meet the ISA encoding
requirements. Notably do not permit $zero to be used as a operand for compact
branches and ensure that some other branches fulfil the requirement that
rs != rt.
Fixup cases where $rs > $rt for bnec and beqc.
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D20284
llvm-svn: 269893
This patch adds the commandline option -mips-compact-branches={never,optimal,always),
which controls how LLVM generates compact branches for MIPS targets. By
default, the compact branch policy is 'optimal' where LLVM will (hopefully)
pick the optimal branch for any situation. The 'never' policy will disable
the generation of compact branches and 'always' will generate compact branches
wherever possible.
Reviewers: dsanders
Differential Review: http://reviews.llvm.org/D20167
llvm-svn: 269753
Summary:
The MIPS IAS can now pass 'ninja check-all', recurse, build a bootable linux
kernel, and pass a variety of LNT testing.
Unfortunately we can't enable it by default for 64-bit targets yet since the N32
ABI is still very buggy and this also means we can't enable it for N64 either
because we can't distinguish between N32 and N64 in the relevant code.
Reviewers: vkalintiris
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D18759
Differential Revision: http://reviews.llvm.org/D18761
llvm-svn: 269560
Summary:
Previously, it returned the GPR16MMRegClass for all instructions which was
incorrect for instructions like lwsp/lwgp and unnecesarily restricted the
permitted registers for instructions like lw32.
This fixes quite a few of the -verify-machineinstrs errors reported in PR27458.
I've only added -verify-machineinstrs to one test in this change since I
understand there is a plan to enable the verifier by default.
Reviewers: hvarga, zbuljan, zoran.jovanovic, sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D19873
llvm-svn: 268918
Summary:
This stops it misidentifying unconditional branches as conditional branches
which fixes a -verify-machineinstrs error about exiting a function via fall through.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D19864
llvm-svn: 268731
Summary:
It's always zero for SelectionDAG and is never read by the MIPS backend so
do the same for FastISel.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D19863
llvm-svn: 268386
Correct trivial error. One of the failing tests from PR/27458.
Reviewers: dsanders, vkalintiris, mcrosier
Differential Review: http://reviews.llvm.org/D19726
llvm-svn: 268053
Currently Mips::emitAtomicBinaryPartword() does not properly respect the
width of pointers. For MIPS64 this causes the memory address that the ll/sc
sequence uses to be truncated. At runtime this causes a segmentation fault.
This can be fixed by applying similar changes as r266204, so that a full 64bit
pointer is loaded.
Reviewers: dsanders
Differential Review: http://reviews.llvm.org/D19651
llvm-svn: 267900
When targetting MIPS64R6 some of the patterns for select were guarded by a
broken predicate. The predicate was supposed to test if a constant value
could fit in a 16 bit zero-extended field. Instead the value was tested to
fit in a 16 bit sign-extended field. For negative constants of native word
width this resulted in wrong code generation.
Reviewers: vkalintiris, dsanders
Differential Review: http://reviews.llvm.org/D19378
llvm-svn: 267151
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
This patch was previous committed as r266055 as seemed to have caused some spurious
test failures. They did not reappear after further local testing.
llvm-svn: 266301
Summary:
The only difference between the removed tests and the pre-existing
ones, is the materialization of the zero constant, which shouldn't
matter for these cases.
Reviewers: dsanders, sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D18693
llvm-svn: 266285
Summary:
This is a special case for MIPS64 because the architecture requires
properly 32-bit sign-extended values in the register containers.
Additionaly, we merge consecutive trunc + AssertZExt nodes in order
to avoid unnecessary sign-extensions when the extension comes from a
type smaller than i32.
Reviewers: dsanders
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D18893
llvm-svn: 266203
Differential Revision: http://reviews.llvm.org/D17137
This patch was reverted after the revertion of dependant patch http://reviews.llvm.org/D17068.
There was the problem with test-suite failure.
The problem is hopefully solved with dependant patch so this patch is commited again.
llvm-svn: 266179
Differential Revision: http://reviews.llvm.org/D17068
This changes contains fix for failing test-suite. So, this patch should hopefully work now.
llvm-svn: 266171
Summary:
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
Reviewers: dsanders
Differential Revision: http://reviews.llvm.org/D18856
llvm-svn: 266055
This change follows up defaults for GCC and Clang, so LLVM does not differ
from them. While number of the test files are touched with this change, they
all keep the old (expected) behaviour with the explicit option:
"-relocation-model=pic"
The tests that have not been touched are insensitive to relocation model.
Differential Revision: http://reviews.llvm.org/D17995
llvm-svn: 265949
Presently, CodeGenPrepare deletes all nearly empty (only phi and branch)
basic blocks. This pass can delete loop preheaders which frequently creates
critical edges. A preheader can be a convenient place to spill registers to
the stack. If the entrance to a loop body is a critical edge, then spills
may occur in the loop body rather than immediately before it. This patch
protects loop preheaders from deletion in CodeGenPrepare even if they are
nearly empty.
Since the patch alters the CFG, it affects a large number of test cases.
In most cases, the changes are merely cosmetic (basic blocks have different
names or instruction orders change slightly). I am somewhat concerned about
the test/CodeGen/Mips/brdelayslot.ll test case. If the loop preheader is not
deleted, then the MIPS backend does not take advantage of a branch delay
slot. Consequently, I would like some close review by a MIPS expert.
The patch also partially subsumes D16893 from George Burgess IV. George
correctly notes that CodeGenPrepare does not actually preserve the dominator
tree. I think the dominator tree was usually not valid when CodeGenPrepare
ran, but I am using LoopInfo to mark preheaders, so the dominator tree is
now always valid before CodeGenPrepare.
Author: Tom Jablin (tjablin)
Reviewers: hfinkel george.burgess.iv vkalintiris dsanders kbarton cycheng
http://reviews.llvm.org/D16984
llvm-svn: 265397
This patch adds support for compact jumps similiar to the previous compact
branch support for MIPSR6. Unlike compact branches, compact jumps do not
have a forbidden slot.
As MipsInstrInfo::getEquivalentCompactForm can determine the correct
expansion for jumps and branches for both microMIPS and MIPSR6, remove the
unnecessary distinction in the delay slot filler.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
llvm-svn: 265390
If the operation's type has been promoted during type legalization, we
need to account for the fact that the high bits of the comparison
operand are likely unspecified.
The LHS is usually zero-extended, but MIPS sign extends it, so we have
to be slightly careful.
Patch by Simon Dardis.
llvm-svn: 264296
Summary:
MIPSR6 introduces a class of branches called compact branches. Unlike the
traditional MIPS branches which have a delay slot, compact branches do not
have a delay slot. The instruction following the compact branch is only
executed if the branch is not taken and must not be a branch.
It works by generating compact branches for MIPS32R6 when the delay slot
filler cannot fill a delay slot. Then, inspecting the generated code for
forbidden slot hazards (a compact branch with an adjacent branch or other
CTI) and inserting nops to clear this hazard.
Patch by Simon Dardis.
Reviewers: vkalintiris, dsanders
Subscribers: MatzeB, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16353
llvm-svn: 263444
This reverts commit r262316.
It seems that my change breaks an out-of-tree chromium buildbot, so
I'm reverting this in order to investigate the situation further.
llvm-svn: 262387
Summary:
This patch modifies the existing comparison, branch, conditional-move
and select patterns, and adds new ones where needed. Also, the updated
SLT{u,i,iu} set of instructions generate a GPR width result.
The majority of the code changes in the Mips back-end fix the wrong
assumption that the result of SETCC nodes always produce an i32 value.
The changes in the common code path account for the fact that in 64-bit
MIPS targets, i1 is promoted to i32 instead of i64.
Reviewers: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D10970
llvm-svn: 262316
Summary:
Previously, it would always select DEXT and substitute any invalid matches
for DEXTU/DEXTM during MipsMCCodeEmitter::encodeInstruction(). This works
but causes problems when adding range checked immediates to IAS.
Now isel selects the correct variant up front.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16810
llvm-svn: 262229
MIPS ABI states that .sbss and .sdata sections must have SHF_MIPS_GPREL
flag. See Figure 4–7 on page 69 in the following document:
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf.
Differential Revision: http://reviews.llvm.org/D15740
llvm-svn: 259641
Remove the old select.ll file and use select-int.ll, select-flt.ll,
select-dbl.ll for testing selects on integers, floats & doubles respectivelly.
llvm-svn: 259361
Author: milena.vujosevic.janicic
Reviewers: dsanders
FastIsel is not supported for microMIPS, thus it needs to be disabled.
Test micromips-zero-mat-uses.ll is deleted since the tested sequence of instructions is not generated for microMIPS without FastISel.
Differential Revision: http://reviews.llvm.org/D15892
llvm-svn: 259039
For historic reasons, the behavior of .align differs between targets.
Fortunately, there are alternatives, .p2align and .balign, which make the
interpretation of the parameter explicit, and which behave consistently across
targets.
This patch teaches MC to use .p2align instead of .align, so that people reading
code for multiple architectures don't have to remember which way each platform
does its .align directive.
Differential Revision: http://reviews.llvm.org/D16549
llvm-svn: 258750
Summary: The result register is the second operand as per the other mt* instructions.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D15993
llvm-svn: 257478
Summary:
It actually takes an offset into the current PC-region.
This fixes the 'expr' command in lldb.
Reviewers: vkalintiris, jaydeep, bhushan
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16054
llvm-svn: 257339
This is recommit of r256028 with minor fixes in unittests:
CodeGen/Mips/eh.ll
CodeGen/Mips/insn-zero-size-bb.ll
Original commit message:
When identifying blocks post-dominated by an unreachable-terminated block
in BranchProbabilityInfo, consider only the edge to the normal destination
block if the terminator is InvokeInst and let calcInvokeHeuristics() decide
edge weights for the InvokeInst.
llvm-svn: 256202
It's strange to duplicate the logic for emitting FP values into
emitGlobalConstantDataSequential, and it's even stranger that we end
up printing the verbose assembly comments differently between the two
paths. Just call into emitGlobalConstantFP rather than crudely
duplicating its logic.
llvm-svn: 254988
Summary:
no-odd-spreg-msa.ll: This test deliberately uses an odd-numbered register
in inline assembly and expects the compiler to insert a move to an
even-numbered register.
inlineasm-operand-code.ll and inlineasm_constraint.ll:
Checks for IAS's output will be added once a matcher bug is resolved. This bug
causes the canonical output emitted by IAS to be incorrect for uimm16 constants
with the MSB set. We will still need the non-IAS checks at this point since
these tests primarily test formatting of operands.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14705
llvm-svn: 254148
Summary:
This is because IAS will delete the comments. NFC at the moment but it will
prevent a failure once IAS is the default.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14704
llvm-svn: 254147
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
llvm-svn: 253511
If a section is rw, it is irrelevant if the dynamic linker will write to
it or not.
It looks like llvm implemented this because gcc was doing it. It looks
like gcc implemented this in the hope that it would put all the
relocated items close together and speed up the dynamic linker.
There are two problem with this:
* It doesn't work. Both bfd and gold will map .data.rel to .data and
concatenate the input sections in the order they are seen.
* If we want a feature like that, it can be implemented directly in the
linker since it knowns where the dynamic relocations are.
llvm-svn: 253436
Several places in AsmPrinter.cpp print comments describing MachineOperand
registers using MCRegisterInfo, which uses MCOperand-oriented names. This
doesn't work for targets that use virtual registers exclusively, as
WebAssembly does, since virtual registers are represented and printed
differently.
This patch preserves what seems to be the spirit of r229978, avoiding the
use of TM.getSubtargetImpl(), while still using MachineOperand-oriented
printing for MachineOperands.
Differential Revision: http://reviews.llvm.org/D14709
llvm-svn: 253338
The way prelink used to work was
* The compiler decides if a given section only has relocations that
are know to point to the same DSO. If so, it names it
.data.rel.ro.local<something>.
* The static linker puts all of these together.
* The prelinker program assigns addresses to each library and resolves
the local relocations.
There are many problems with this:
* It is incompatible with address space randomization.
* The information passed by the compiler is redundant. The linker
knows if a given relocation is in the same DSO or not. If could sort
by that if so desired.
* There are newer ways of speeding up DSO (gnu hash for example).
* Even if we want to implement this again in the compiler, the previous
implementation is pretty broken. It talks about relocations that are
"resolved by the static linker". If they are resolved, there are none
left for the prelinker. What one needs to track is if an expression
will require only dynamic relocations that point to the same DSO.
At this point it looks like the prelinker is an historical curiosity.
For example, fedora has retired it because it failed to build for two
releases
(http://pkgs.fedoraproject.org/cgit/prelink.git/commit/?id=eb43100a8331d91c801ee3dcdb0a0bb9babfdc1f)
This patch removes support for it. That is, it stops printing the
".local" sections.
llvm-svn: 253280
Summary:
Without these patterns we would generate a complete LL/SC sequence.
This would be problematic for memory regions marked as WRITE-only or
READ-only, as the instructions LL/SC would read/write to the protected
memory regions correspondingly.
Reviewers: dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14397
llvm-svn: 252293
Summary:
This commit resolves wrong opcodes for ll and sc instructions for r6 architecutres, which were generated in method MipsTargetLowering::emitAtomicBinary.
Author: Jelena.Losic
Reviewers: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13593
llvm-svn: 251629
Summary:
The microMIPS register class GPRMM16 does not contain the $zero register.
However, MipsSEDAGToDAGISel::replaceUsesWithZeroReg() would replace uses
of the $dst register:
[d]addiu, $dst, $zero, 0
with the $zero register, without checking for membership in the register
class of the target machine operand.
Reviewers: dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13984
llvm-svn: 251622
Instead of XFAIL-ing the tests with the wrong usage of the "interrupt"
attribute, we should check that we emit the correct error messages to
the user.
llvm-svn: 251295
Summary:
This patch adds support for using the "interrupt" attribute on Mips
for interrupt handling functions. At this time only mips32r2+ with the
o32 ABI with the static relocation model is supported. Unsupported
configurations will be rejected
Patch by Simon Dardis (+ clang-format & some trivial changes to follow the
LLVM coding standards by me).
Reviewers: mpf, dsanders
Subscribers: dsanders, vkalintiris, llvm-commits
Differential Revision: http://reviews.llvm.org/D10768
llvm-svn: 251286
Summary:
Previously, we were inserting an InlineAsm statement for each line of the
inline assembly. This works for GAS but it triggers prologue/epilogue
emission when IAS is in use. This caused:
.set noreorder
.cpload $25
to be emitted as:
.set push
.set reorder
.set noreorder
.set pop
.set push
.set reorder
.cpload $25
.set pop
which led to assembler errors and caused the test to fail.
The whitespace-after-comma changes included in this patch are necessary to
match the output when IAS is in use.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13653
llvm-svn: 250895
Summary:
The forwards compatibility strategy employed by MIPS is to consider registers
to be infinitely sign-extended. Then on ISA's with a wider register, the result
of existing instructions are sign-extended to register width and zero-extended
counterparts are added. copy_u.w on MSA32 and copy_u.w on MSA64 violate this
strategy and we have therefore corrected the MSA specs to fix this.
We still keep track of sign/zero-extension during legalization but we now
match copy_s.[wd] where required.
No change required to clang since __builtin_msa_copy_u_[wd] will map to
copy_s.[wd] where appropriate for the target.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13472
llvm-svn: 250887
Summary:
The -mcpu=mips16 option caused the Integrated Assembler to crash because
it couldn't figure out the architecture revision number to write to the
.MIPS.abiflags section. This CPU definition has been removed because, like
microMIPS, MIPS16 is an ASE to a base architecture.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13656
llvm-svn: 250407
Summary:
This removes unnecessary instructions when extracting from an undefined register
and also fixes a crash for O32 when passing undef to a double argument in
held in integer registers.
Reviewers: vkalintiris
Subscribers: llvm-commits, zoran.jovanovic, petarj
Differential Revision: http://reviews.llvm.org/D13467
llvm-svn: 250039
Summary:
This fixes 7 tests during fast LLVM test-suite run:
* MultiSource/Benchmarks/McCat/18-imp/imp
* MultiSource/Applications/oggenc/oggenc
* MultiSource/Benchmarks/MallocBench/gs/gs
* MultiSource/Benchmarks/MiBench/automotive-susan/automotive-susan
* MultiSource/Benchmarks/VersaBench/beamformer/beamformer
* MultiSource/Benchmarks/MiBench/consumer-lame/consumer-lame
* MultiSource/Benchmarks/Bullet/bullet
Error message was in the form of:
fatal error: error in backend: Cannot select: 0x95c3288: f32 = fsqrt 0x95c0190 [ORD=9] [ID=18]
0x95c0190: f32 = fadd 0x95bef30, 0x95c4d00 [ORD=8] [ID=17]
0x95bef30: f32 = fmul 0x95c4988, 0x95c4988 [ORD=5] [ID=16]
...
There was problem with selecting sqrt instruction in LLVM backend.
To fix the issue changes are made in TableGen definition for sqrt instruction in MipsInstrFPU.td and new test file sqrt.ll is added to LLVM regression tests.
Patch by Zlatko Buljan
Reviewers: zoran.jovanovic, hvarga, dsanders
Subscribers: llvm-commits, petarj
Differential Revision: http://reviews.llvm.org/D13235
llvm-svn: 249416
Summary:
One of the vector splitting paths for extract_vector_elt tries to lower:
define i1 @via_stack_bug(i8 signext %idx) {
%1 = extractelement <2 x i1> <i1 false, i1 true>, i8 %idx
ret i1 %1
}
to:
define i1 @via_stack_bug(i8 signext %idx) {
%base = alloca <2 x i1>
store <2 x i1> <i1 false, i1 true>, <2 x i1>* %base
%2 = getelementptr <2 x i1>, <2 x i1>* %base, i32 %idx
%3 = load i1, i1* %2
ret i1 %3
}
However, the elements of <2 x i1> are not byte-addressible. The result of this
is that the getelementptr expands to '%base + %idx * (1 / 8)' which simplifies
to '%base + %idx * 0', and then simply '%base' causing all values of %idx to
extract element zero.
This commit fixes this by promoting the vector elements of <8-bits to i8 before
splitting the vector.
This fixes a number of test failures in pocl.
Reviewers: pekka.jaaskelainen
Subscribers: pekka.jaaskelainen, llvm-commits
Differential Revision: http://reviews.llvm.org/D12591
llvm-svn: 247128
Summary: And define them to have noop casts with address spaces 0-255.
Reviewers: pekka.jaaskelainen
Subscribers: pekka.jaaskelainen, llvm-commits
Differential Revision: http://reviews.llvm.org/D12678
llvm-svn: 246990
Simon Dardis