D91497 changed lldb/test/Shell/Register/x86-fp-write.test and added target-x86_64 to the REQUIRES clause.
It looks this test does not pass on this platform so removing it since it one of tests failing on the
green dragon build bot.
We can handle all the types in the expression evaluator now without casting.
On Linux, we have a system header declaration that is still causing issues, so
I'm skipping the test there until I get around to fix this.
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
Differential Revision: https://reviews.llvm.org/D91504
The FXSAVE/XSAVE data can have two different layouts on x86_64. When
called as FXSAVE/XSAVE..., the Instruction Pointer and Address Pointer
registers are reported using a 16-bit segment identifier and a 32-bit
offset. When called as FXSAVE64/XSAVE64..., they are reported using
a complete 64-bit offsets instead.
LLDB has historically followed GDB and unconditionally used to assume
the 32-bit layout, with the slight modification of possibly
using a 32-bit segment register (i.e. extending the register into
the reserved 16 upper bits). When the underlying operating system used
FXSAVE64/XSAVE64..., the pointer was split into two halves,
with the upper half repored as the segment registers. While
reconstructing the full address was possible on the user end (and e.g.
the FPU register tests did that), it certainly was not the most
convenient option.
Introduce a two additional 'fip' and 'fdp' registers that overlap
with 'fiseg'/'fioff' and 'foseg'/'foff' respectively, and report
the complete 64-bit address.
Differential Revision: https://reviews.llvm.org/D91497
Depends on D90490.
The stop command is simple and invokes the new method Trace::StopTracingThread(thread).
On the other hand, the start command works by delegating its implementation to a CommandObject provided by the Trace plugin. This is necessary because each trace plugin needs different options for this command. There's even the chance that a Trace plugin can't support live tracing, but instead supports offline decoding and analysis, which means that "thread trace dump instructions" works but "thread trace start" doest. Because of this and a few other reasons, it's better to have each plugin provide this implementation.
Besides, I'm using the GetSupportedTraceType method introduced in D90490 to quickly infer what's the trace plug-in that works for the current process.
As an implementation note, I moved CommandObjectIterateOverThreads to its header so that I can use it from the IntelPT plugin. Besides, the actual start and stop logic for intel-pt is not part of this diff.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D90729
init_llgs_test no longer takes an argument
but these two were not updated.
Also fix some mistakes in TestAutoInstallMainExecutable
to get it passing again.
Reviewed By: JDevlieghere, labath
Differential Revision: https://reviews.llvm.org/D91612
Add a parser for JSON crashlogs. The CrashLogParser now defers to either
the JSONCrashLogParser or the TextCrashLogParser. It first tries to
interpret the input as JSON, and if that fails falling back to the
textual parser.
Differential revision: https://reviews.llvm.org/D91130
LLDB is currently always activating C++ when parsing expressions as LLDB itself
is using C++ features when creating the final AST that will be codegen'd
(specifically, references to variables, namespaces and using declarations are
used).
This is causing problems for users that have variables in non-C++ programs (e.g.
plain C or Objective-C) that have names which are keywords in C++. Expressions
referencing those variables fail to parse as LLDB's Clang parser thinks those
identifiers are C++ keywords and not identifiers that may belong to a
declaration.
We can't just disable C++ in the expression parser for those situations as
replacing the functionality of the injected C++ code isn't trivial. So this
patch is just disabling most keywords that are exclusive to C++ in LLDB's Clang
parser when we are in a non-C++ expression. There are a few keywords we can't
disable for now:
* `using` as that's currently used in some situations to inject variables into the expression function.
* `__null` as that's used by LLDB to define `NULL`/`Nil`/`nil`.
Getting rid of these last two keywords is possible but is a large enough change
that this will be handled in follow up patches.
Note that this only changes the keyword status of those tokens but this patch
does not remove any C++ functionality from the expression parser. The type
system still follows C++ rules and so does the rest of the expression parser.
There is another small change that gives the hardcoded macro definitions in LLDB
a higher precedence than the macros imported from the Objective-C modules. The
reason for this is that the Objective-C modules in LLDB are actually parsed in
Objective-C++ mode and they end up providing the C++ definitions of certain
system macros (like `NULL` being defined as `nullptr`). So we have to move the
LLDB definition forward and surround the definition from the module with an
`#ifdef` to make sure that we use the correct LLDB definition that doesn't
reference C++ keywords. Or to give an example, this is how the expression source
code changes:
Before:
```
#define NULL (nullptr) // injected module definition
#ifndef NULL
#define NULL (__null) // hardcoded LLDB definition
#endif
```
After:
```
#ifndef NULL
#define NULL (__null) // hardcoded LLDB definition
#endif
#ifndef NULL
#define NULL (nullptr) // injected module definition
#endif
```
Fixes rdar://10356912
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D82770
I think the check for whether the process is connected is totally bogus
in the first place, but on the off-chance that's it's not, we should
behave the same in synchronous and asynchronous mode.
"[lldb/DataFormatters] Display null C++ pointers as nullptr" added an assumption
that the member we check for is always a nullptr, but it is actually never
initialized. That causes the test to randomly fail due to the pointer having
some random value that isn't 0.
On x86_64, when you hit a __builtin_debugtrap instruction, you
can continue past this in the debugger. This patch has debugserver
recognize the specific instruction used for __builtin_debugtrap
and advance the pc past it, so that the user can continue execution
once they've hit one of these.
In the patch discussion, we were in agreement that it would be better
to have this knowledge up in lldb instead of depending on each
stub rewriting the pc behind the debugger's back, but that's a
larger scale change for another day.
<rdar://problem/65521634>
Differential revision: https://reviews.llvm.org/D91238
Display null pointer as `nullptr`, `nil` and `NULL` for C++,
Objective-C/Objective-C++ and C respectively. The original motivation
for this patch was to display a null std::string pointer as nullptr
instead of "", but the fix seemed generic enough to be done for all
summary providers.
Differential revision: https://reviews.llvm.org/D77153
When parsing DWARF and laying out bit-fields we don't properly take into account when they are in a union, they will all have a zero offset.
Differential Revision: https://reviews.llvm.org/D91118
When I added TestAbortExitCode I actually planned this to be a generic test for the
exit code functionality on POSIX systems. However due to all the different test setups we
can have I don't think this worked out. Right now the test had to be made so permissive
that it pretty much can't fail.
Just to summarize, we would need to support the following situations:
1. ToT debugserver (on macOS)
2. lldb-server (on other platforms)
3. Any old debugserver version when using the system debugserver (on macOS)
This patch is removing TestAbortExitCode and adds a ToT debugserver specific test
that checks the patch that motivated the whole exit code testing. There is already
an exit-code test for lldb-server from what I can see and 3) is pretty much untestable
as we don't know anything about the system debugserver.
Reviewed By: kastiglione
Differential Revision: https://reviews.llvm.org/D89305
This adds `expect_var_path` to test variable paths so we no longer have to
use `frame var` and find substrs in the command output. The behaviour
is identical with `expect_expr` (and it also uses the same checking backend),
but it instead calls `GetValueForVariablePath` to evaluate the string as a variable
path.
Also rewrites a few of the tests that previously used `frame variable` to use
`expect_var_path`.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D90450
Add a test verifying that after the 'watchpoint' command, new values
of x86 debug registers can be read back correctly. The primary purpose
of this test is to catch broken DRn reading and help debugging it.
Differential Revision: https://reviews.llvm.org/D91264
Commit 5f12f4ff90 made suppressing inline namespaces
when printing typenames default to true. As we're using the inline namespaces
in LLDB to construct internal type names (which need internal namespaces in them
to, for example, differentiate libc++'s std::__1::string from the std::string
from libstdc++), this broke most of the type formatting logic.
Following discussion in D91193, a change made in D88792 was not quite right.
This restores the message argument, and switches from `expect` to `runCmd`.
Differential Revision: https://reviews.llvm.org/D91206
Those two decorators have identical behaviour. This removes
`not_remote_testsuite_ready` as `skipIfRemote` seems more consistent with the
other decorator names we have
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D89376
Copy the recent improvements from the FreeBSDRemote plugin, notably:
- moving event reporting setup into SetupTrace() helper
- adding more debug info into SIGTRAP handling
- handling user-generated (and unknown) SIGTRAP events
- adding missing error handling to the generic signal handler
- fixing attaching to processes
- switching watchpoint helpers to use llvm::Error
- minor style and formatting changes
This fixes a number of tests, mostly related to fixed attaching.
Differential Revision: https://reviews.llvm.org/D91167
It seems that TestErrorMessages.test is failing on the standalone + Xcode builds
as lldb-server executable can't be found by lit's default PATH search. I assume
invoking lldb-server via a lit substitution gets this working again as
everything else is working, so that's what this patch is doing.
I had to add the lldb-server substitution as the test seems lldb-server specific
and we don't want it to default to debugserver on Darwin.
Using a substitution also seems in general like a good idea so that the commands
lit is printing on failure are using the full path to lldb-server and can be
re-run in a terminal.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91155
Explicitly copy dbregs to new threads to ensure that watchpoints
are propagated properly. Fixes the test failure due to apparent kernel
race between reporting a new thread and resuming main thread execution
that makes implicit inheritance of dbregs unreliable. By copying them
explicitly, we ensure that the new thread correctly respects watchpoints
that were set after the thread was created but before it was reported.
The code is copied from the NetBSD plugin and modernized to use
llvm::Error.
Differential Revision: https://reviews.llvm.org/D91032
Update the SIGTRAP handler to account for the possibility of SIGTRAP
being generated by the user, i.e. not having any specific debugging
event associated with it, as well as receiving unknown SIGTRAPs. These
instances of SIGTRAP are passed to the regular signal handler.
Differential Revision: https://reviews.llvm.org/D91007
Make category-specifying files visible. There is really no good reason
to keep them hidden, and having them visible increases the chances
that someone will actually spot them.
Differential Revision: https://reviews.llvm.org/D91065
Replace the plethora of ObjC-implied 'skipUnlessDarwin' decorators
with marking tests as 'objc' category (whenever missing), and skip all
ObjC tests on non-Darwin platforms. I have used '.categories' file
wherever it was present already or all (>1) tests were relying on ObjC,
and explicit add_test_categories() where there was only one test.
Differential Revision: https://reviews.llvm.org/D91056
Part 2 of a fix for JITed code debugging. This has been a regression from 5.0 to 6.0 and it's still reproducible on current master: https://bugs.llvm.org/show_bug.cgi?id=36209 Part 1 was D61611 a while ago.
The in-memory object files we obtain from JITLoaderGDB are not yet relocated. It looks like this used to happen on the LLDB side and my guess is that it broke with D38142. (However, it's hard to tell because the whole thing was broken already due to the bug in part 1.) The patch moved relocation resolution to a later point in time and didn't apply it to in-memory objects. I am not aware of any reason why we wouldn't resolve relocations per-se, so I made it unconditional here. On Debian, it fixes the bug for me and all tests in `check-lldb` are still fine.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D90769
I found a few cases where entries in the debug_line for a specific line of code have invalid entries (the address is outside of a code section or no section at all) and also valid entries. When this happens lldb might not set the breakpoint because the first line entry it will find in the line table might be the invalid one and since it's range is "invalid" no location is resolved. To get around this I changed the way we parse the line sequences to ignore those starting at an address under the first code segment.
Greg suggested to implement it this way so we don't need to check all sections for every line sequence.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D87172
When LLDB Python bindings are used and stack backtraces are enabled
for logging, getMainExecutable() is called with argv0 being null.
This caused the fallback function getprogpath() (used on FreeBSD, NetBSD
and Linux) to segfault. Make it handle null executable name gracefully.
Differential Revision: https://reviews.llvm.org/D91012
TestWatchpointMultipleThreads currently accounts for two scenarios:
setting the watchpoint before a new thread starts (presumably, verifying
that it will be propagated to the new thread) and setting it after
the thread starts (presumably, verifying that a new watchpoint is set
on all threads). However, the latter test currently assumes that
the thread will be reported to the debugger before the breakpoint is
hit. This is not the case on FreeBSD and NetBSD.
On NetBSD, new threads do not inherit debug registers from their parent
threads. Instead, LLDB copies them manually after the new thread is
reported. Since the thread is actually reported after the second
breakpoint location, both tests effectively check the same behavior
(i.e. watchpoint being set before the new thread is reported).
On FreeBSD, new threads inherit debug registers and we seem to hit
an interesting race condition. While the thread is reported after
the breakpoint is hit, the kernel seems to construct it and copy
the debug register before that happens. As a result, setting
the watchpoint at the second breakpoint location modifies the debug
registers of the first thread after they have been copied to the second
thread but before the debugger is aware of it. Therefore,
the watchpoint is not propagated to the second thread and the test
fails.
Extend the test to cover all three possible scenarios: setting
watchpoint before the thread is lanched, after it is launched but before
it is guaranteed to have started and after it has actually started. Add
a second barrier to account for the last case. This should ensure that
the second assumption (i.e. that the watchpoint is set on all currently
known threads) is actually tested on FreeBSD and NetBSD.
Differential Revision: https://reviews.llvm.org/D91030
This would be reproducible in future DWZ category of the testsuite as:
Failed Tests (1):
lldb-api :: python_api/symbol-context/two-files/TestSymbolContextTwoFiles.py
Differential Revision: https://reviews.llvm.org/D91014
Use skipUnlessDarwin decorator for tests that are specific to Darwin,
instead of skipIf... for all other platforms. This should make it clear
that these tests are not supposed to work elsewhere. It will also make
these tests stop repeatedly popping up while I look for tests that could
be fixed on the platform in question.
Differential Revision: https://reviews.llvm.org/D91003
Depends on D89408.
This diff finally implements trace decoding!
The current interface is
$ trace load /path/to/trace/session/file.json
$ thread trace dump instructions
thread #1: tid = 3842849, total instructions = 22
[ 0] 0x40052d
[ 1] 0x40052d
...
[19] 0x400521
$ # simply enter, which is a repeat command
[20] 0x40052d
[21] 0x400529
...
This doesn't do any disassembly, which will be done in the next diff.
Changes:
- Added an IntelPTDecoder class, that is a wrapper for libipt, which is the actual library that performs the decoding.
- Added TraceThreadDecoder class that decodes traces and memoizes the result to avoid repeating the decoding step.
- Added a DecodedThread class, which represents the output from decoding and that for the time being only stores the list of reconstructed instructions. Later it'll contain the function call hierarchy, which will enable reconstructing backtraces.
- Added basic APIs for accessing the trace in Trace.h:
- GetInstructionCount, which counts the number of instructions traced for a given thread
- IsTraceFailed, which returns an Error if decoding a thread failed
- ForEachInstruction, which iterates on the instructions traced for a given thread, concealing the internal storage of threads, as plug-ins can decide to generate the instructions on the fly or to store them all in a vector, like I do.
- DumpTraceInstructions was updated to print the instructions or show an error message if decoding was impossible.
- Tests included
Differential Revision: https://reviews.llvm.org/D89283
This test requires running under the Python we built against (which is
easy) and setting up the PYTHONPATH (which is not worth it for this
simple test).
This patch changes the implementation of Lua's `print()` function to
respect `io.stdout`.
The original implementation uses `lua_writestring()` internally, which is
hardcoded to `stdout`.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D90787
Remove the thread name caching code. It does not handle the possibility
of thread name changing between requests, therefore breaking
TestGdbRemoteThreadName. While technically we could cache the results
and reset the cache on resuming process, the gain from doing that
does not seem worth the effort.
Differential Revision: https://reviews.llvm.org/D90863
Fix TestGdbRemoteThreadName to call ::pthread_setname_np instead
of ::pthread_set_name_np on FreeBSD. While technically both names
are correct, the former is preferable because of compatibility
with Linux. Furthermore, the latter requires `#include <pthread_np.h>`
that was missing causing the test to fail to compile.
Differential Revision: https://reviews.llvm.org/D90862
The new FreeBSDRemote plugin has reached feature parity on i386
and amd64 targets. Use it by default on these architectures, while
allowing the use of the legacy plugin via FREEBSD_LEGACY_PLUGIN envvar.
Revisit the method of switching plugins. Apparently, the return value
of PlatformFreeBSD::CanDebugProcess() is what really decides whether
the legacy or the new plugin is used.
Update the test status. Reenable the tests that were previously
disabled on FreeBSD and do not cause hangs or are irrelevant to FreeBSD.
Mark all tests that fail reliably as expectedFailure. For now, tests
that are flaky (i.e. produce unstable results) are left enabled
and cause unpredictable test failures.
Differential Revision: https://reviews.llvm.org/D90757
`fork` is marked as `__WATCHOS_PROHIBITED __TVOS_PROHIBITED` so the test source
which is calling fork will never compile on watchOS/tvOS. This just adds the
skip decorator for these platforms.
Reviewed By: mib
Differential Revision: https://reviews.llvm.org/D89695
This is a follow up to D88792 which found an issue in a call to PExpectTest's
expect function that allows passing a string to the `substrs` parameter. However
this issue was found by just grepping and TestPExpect's expect function is still
accepting a single string as a value to `substrs`.
This patch adds the same sanity check that D88792 added to the PExpectTest's
implementation of `expect` and also adds a small test for it.
Reviewed By: kastiglione, JDevlieghere
Differential Revision: https://reviews.llvm.org/D89302
SBType::GetArrayElementType should return the actual type, not the
canonical type (e.g. int32_t, not the underlying int).
Added a test case to validate the new behavior. I also ran all other
tests on Linux (ninja check-lldb), they all pass.
Differential revision: https://reviews.llvm.org/D90318
This allows the Target to update its module list when loading a shared
module replaces an equivalent one.
A testcase is added which hits this codepath -- without the fix, the
target reports libbreakpad.so twice in its module list.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D89157
Current user_id_t format is:
63{isDebugTypes} 62..32{dwo || 7fffffff}
31..0 {die_offset}
while current DIERef format is (I have made up the bit positions but the
field widths do match):
63{m_section==isDebugTypes} 62{m_dwo_num_valid} 61..32{m_dwo_num}
31..0 {m_die_offset}
Proposing to change user_id_t to:
63{isDebugTypes} 62{dwo_is_valid} 61..32{dwo; 0 if !valid}
31..0 {die_offset}
There is no benefit of having 31-bits wide dwo_num in user_id_t when it
gets converted to 30-bits width in DIERef.
This patch is for future DWZ patchset which extends the dwo_is_valid bit
into a 2-bit field (normal, DWO, DWZ, DWZcommon) so that both user_id_t
and DIERef can be changed then the same way.
It would be best to somehow unify user_id_t and DIERef but I do not plan
to do that. user_id_t should probably remain a number for the Python API
compatibility while there still needs to be some class with all the
methods to access it.
SymbolFileDWARF::GetDwpSymbolFile() and SymbolFileDWARF::GetDIE use
0x3fffffff for DWP but that does not clash:
formerly:
31bits32..62:0x7fffffff = normal unit / not any DWO
31bits32..62:0x3fffffff = DWP
31bits32..62:others = DWO unit number
after this patch:
bit62=0 30bits32..61:any = normal unit / not any DWO
bit62=1 30bits32..61:0x3fffffff = DWP
bit62=1 30bits32..61:others = DWO unit number
Differential Revision: https://reviews.llvm.org/D90413
SymbolFileDWARF::GetTypes was not handling dwo correctly. The fix is
simple -- adding a GetNonSkeletonUnit call -- but I've snuck in a small
refactor as well.
Debug server is already launched by prep_debug_monitor_and_inferior. The
second seems to have been benign so far, but after 8cc49bec2 this test
started failing frequently on GreenDragon, and this is the only unusual
thing about it.
The intention is not to allow stop-hook commands to query the
user, so this is correct. It also works around a deadlock in
switching to the Python Session to execute python based commands
in the stop hook when the Debugger stdin is backed by a FILE *.
Differential Revision: https://reviews.llvm.org/D90332
This fixes an flakyness is all gdb-remote tests. These tests have been
(mildly) flaky since we started using "localhost" instead of 127.0.0.1
in the test suite. The reason is that lldb-server needs to create two
sockets (v4 and v6) to listen for localhost connections. The algorithm
it uses first tries to select a random port (bind(localhost:0)) for the
first address, and then bind the same port for the second one.
The creating of the second socket can fail as there's no guarantee that
port will be available -- it seems that the (linux) kernel tries to
choose an unused port for the first socket (I've had to create thousands
of sockets to reproduce this reliably), but this can apparantly fail
when the system is under load (and our test suite creates a _lot_ of
sockets).
The socket creationg operation is considered successful if it creates at
least one socket is created, but the test harness has no way of knowing
which one it is, so it can end up connecting to the wrong address.
I'm not aware of a way to atomically create two sockets bound to the
same port. One way to fix this would be to make lldb-server report the
address is it listening on instead of just the port. However, this would
be a breaking change and it's not clear to me that's worth it (the
algorithm works pretty well under normal circumstances).
Instead, this patch sidesteps that problem by using "reverse"
connections. This way, the test harness is responsible for creating the
listening socket so it can pass the address that it has managed to open.
It also results in much simpler code overall.
To preserve test coverage for the named pipe method, I've moved the
relevant code to a dedicated test. To avoid original problem, this test
passes raw addresses (as obtained by getaddrinfo(localhost)) instead of
"localhost".
Differential Revision: https://reviews.llvm.org/D90313
Make it possible to use a relative path in command script import to the
location of the file being sourced. This allows the user to put Python
scripts next to LLDB command files and importing them without having to
specify an absolute path.
To enable this behavior pass `-c` to `command script import`. The
argument can only be used when sourcing the command from a file.
rdar://68310384
Differential revision: https://reviews.llvm.org/D89334
Replace the inline x86 watchpoint handling code with the reusable
NativeRegisterContextWatchpoint_x86. Implement watchpoint support
in NativeThreadFreeBSD and SIGTRAP handling for watchpoints.
Un-skip all concurrent_events tests as they pass with the new plugin.
Differential Revision: https://reviews.llvm.org/D90102
TestQuoting's different test methods all build their own test binaries but
we can just reuse the same test binary by merging all asserts into one method.
This reduces the test runtime from 8 seconds to 4 seconds on my machine.
This also removes the ability to have partial failures in this test, but given
how rarely this code is touched this seems like a fair tradeoff (and we will be
able to re-add this feature once we updated our test framework).
Some other small changes:
* Fixed that we cleanup "stdout.txt" instead of "output.txt" in the cleanup.
* Fixed some formatting issues.
* Call `build` instead of directly calling `buildDefault`.
clang supports option -fsplit-machine-functions and this test checks if the
backtraces are sane when functions are split.
With -fsplit-machine-functions, a function with profiles can get split into 2
parts, the original function containing hot code and a cold part as determined
by the profile info and the cold cutoff threshold.. The cold part gets the
".cold" suffix to disambiguate its symbol from the hot part and can be placed
arbitrarily in the address space.
This test checks if the back-trace looks correct when the cold part is executed.
Differential Revision: https://reviews.llvm.org/D90081
Displaying large packed bitfields did not work if one was accessing them
through a pointer, and he used the "->" notation ("[0]." notation is
fine). The reason for that is that implicit dereference in -> is plumbed
all the way down to ValueObjectChild::UpdateValue, where the process of
fetching the child value was forked for this flag. The bitfield
"sliding" code was implemented only for the branch which did not require
dereferencing.
This patch restructures the function to avoid this mistake. Processing
now happens in two stages.
- first the parent is dereferenced (if needed)
- then the child value is computed (this step includes sliding and is
common for both branches)
Differential Revision: https://reviews.llvm.org/D89236
Reset registers to their 'initial' state instead of a semi-random
pattern in write tests. While the latter might have been helpful
while debugging failures (i.e. to distinguish unmodified registers
from mistakenly written zeroes), the former makes it possible to test
whether xstate_bv field is written correctly when using XSAVE.
With this change, the four relevant tests start failing on NetBSD
without D90105.
Differential Revision: https://reviews.llvm.org/D90114
For performance reasons the reproducers don't copy the files captured by
the file collector eagerly, but wait until the reproducer needs to be
generated.
This is a problematic when LLDB crashes and we have to do all this
signal-unsafe work in the signal handler. This patch uses a similar
trick to clang, which has the driver invoke a new cc1 instance to do all
this work out-of-process.
This patch moves the writing of the mapping file as well as copying over
the reproducers into a separate process spawned when lldb crashes.
Differential revision: https://reviews.llvm.org/D89600
In a new Range class was introduced to simplify and the Disassembler API
and reduce duplication. It unintentionally broke the
SBFrame::Disassemble functionality because it unconditionally converts
the number of instructions to a Range{Limit::Instructions,
num_instructions}. This is subtly different from the previous behavior,
where now we're passing a Range and assume it's valid in the callee, the
original code would propagate num_instructions and the callee would
compare the value and decided between disassembling instructions or
bytes.
Unfortunately the existing tests was not particularly strict:
disassembly = frame.Disassemble()
self.assertNotEqual(len(disassembly), 0, "Disassembly was empty.")
This would pass because without this patch we'd disassemble zero
instructions, resulting in an error:
(lldb) script print(lldb.frame.Disassemble())
error: error reading data from section __text
Differential revision: https://reviews.llvm.org/D89925
This test checks that the output of `SBTarget.GetDescription()` contains the
substrings `'a.out', 'Target', 'Module', 'Breakpoint'` in that order. This test
is currently failing on Apple simulators as apparently 'Module' can't be found
in the output after 'Target".
The reason for that is that the actual output of `SBTarget.GetDescription()` looks like this:
```
Target
Module /build/path/lldb-test-build.noindex/python_api/target/TestTargetAPI.test_get_description_dwarf/a.out
0x7ff2b6d3f990: ObjectFileMachO64, file = /build/path/lldb-test-build.noindex/python_api/target/TestTargetAPI.test_get_description
[...]
0x7ff307150000: BreakpointList with 0 Breakpoints:
<LLDB module output repeats for each loaded module>
```
Clearly the string order should be `'Target', 'Module', 'a.out', 'Breakpoint'`.
However, LLDB is also a bunch of system shared libraries (libxpc.dylib,
libobjc.A.dylib, etc.) when *not* running against a simulator, we end up
unintentionally finding the `'Target', 'Module', 'Breakpoint'` substrings in the
trailing descriptions of the system modules. When running against a simulator we
however don't load shared system libraries.
This patch just moves the substrings in the correct order to make this test pass
without having any shared library modules in the description output.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D89698
The existing help text was very terse and was missing several important
options. In the new version, I add a short description of each option
and a slightly longer description of the tool as a whole.
The new option list does not include undocumented no-op options:
--debug and --verbose. It also does not include undocumented short
aliases for long options, with two exceptions: -h, because it's
well-known; and -S (--setsid), as it's used in one test. Using these
options will now produce an error. I believe that is acceptable as users
aren't generally invoking lldb-server directly, and the only way to
learn about the short aliases was by looking at the source.
Differential Revision: https://reviews.llvm.org/D89477
There were invalid DIE references which nobody used. If LLDB starts to
report invalid DIE references it would lock up (mutex lock).
These invalid DIE references are there since initial check-in by:
https://reviews.llvm.org/D83302
The test reorders the basic blocks to be dis-contiguous in the address space and checks if the back trace contains the right symbol.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D89179
When opening a minidump, we might discover that it reports a UUID for a
module that doesn't match the build ID, but rather a hash of the .text
section (according to either of two different hash functions, used by
breakpad and Facebook respectively). The current logic searches for a
module by filename only to check the hash; this change updates it to
first search by directory+filename. This is important when the
directory specified in the minidump must be interpreted relative to a
user-provided sysoort, as the leaf directory won't be in the search path
in that case.
Also add a regression test; without this change, module validation fails
because we have just the placeholder module which reports as its path
the platform path in the minidump.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D89155
XFAIL nodefaultlib.cpp on darwin - the test does not pass there
XFAIL TestGdbRemoteMemoryAllocation on windows - memory is allocated
with incorrect permissions
This patch adds support for the _M and _m gdb-remote packets, which
(de)allocate memory in the inferior. This works by "injecting" a
m(un)map syscall into the inferior. This consists of:
- finding an executable page of memory
- writing the syscall opcode to it
- setting up registers according to the os syscall convention
- single stepping over the syscall
The advantage of this approach over calling the mmap function is that
this works even in case the mmap function is buggy or unavailable. The
disadvantage is it is more platform-dependent, which is why this patch
only works on X86 (_32 and _64) right now. Adding support for other
linux architectures should be easy and consist of defining the
appropriate syscall constants. Adding support for other OSes depends on
the its ability to do a similar trick.
Differential Revision: https://reviews.llvm.org/D89124
Add a test to verify that 'register read' and 'register write' commands
work correctly in a multithreaded program, in particular that they read
or write registers for the correct thread. The tests use locking
to ensure that events are serialized and the test can execute reliably.
Differential Revision: https://reviews.llvm.org/D89248
Currently one can redefine a persistent variable and LLDB will just silently
ignore the second definition:
```
(lldb) expr int $i = 1
(lldb) expr int $i = 2
(lldb) expr $i
(int) $i = 1
```
This patch makes this an error and rejects the expression with the second
definition.
A nice follow up would be to refactor LLDB's persistent variables to not just be
a pair of type and name, but also contain some way to obtain the original
declaration and source code that declared the variable. That way we could
actually make a full diagnostic as we would get from redefining a variable twice
in the same expression.
Reviewed By: labath, shafik, JDevlieghere
Differential Revision: https://reviews.llvm.org/D89310
While debugging another bug I found out that we currently don't set any limit
for the number of diagnostics Clang emits. If a user does something that
generates a lot of errors (like including some long header file from within the
expression function), then we currently spam the LLDB output with potentially
thousands of Clang error diagnostics.
Clang sets a default limit of 20 errors, but given that LLDB is often used
interactively for small expressions I would say a limit of 5 is enough. The
limit is implemented as a setting, so if a user cares about seeing having a
million errors printed to their terminal then they can just increase the
settings value.
Reviewed By: shafik, mib
Differential Revision: https://reviews.llvm.org/D88889
This patch adds several build system targets that run the normal test suite but
against the Watch/TV/iPhone simulators.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D89224
This test
On macOS, this test can instead return `status = 0 (0x00000000) Terminated due to signal 6`. This updates the `CHECK` accordingly.
Differential Revision: https://reviews.llvm.org/D89273
Depends on D88841
As per the discussion in the RFC, we'll implement both
thread trace dump [instructions | functions]
This is the first step in implementing the "instructions" dumping command.
It includes:
- A minimal ProcessTrace plugin for representing processes from a trace file. I noticed that it was a required step to mimic how core-based processes are initialized, e.g. ProcessElfCore and ProcessMinidump. I haven't had the need to create ThreadTrace yet, though. So far HistoryThread seems good enough.
- The command handling itself in CommandObjectThread, which outputs a placeholder text instead of the actual instructions. I'll do that part in the next diff.
- Tests
{F13132325}
Differential Revision: https://reviews.llvm.org/D88769
With the feedback I was getting in different diffs, I realized that splitting the parsing logic into two classes was not easy to deal with. I do see value in doing that, but I'd rather leave that as a refactor after most of the intel-pt logic is in place. Thus, I'm merging the common parser into the intel pt one, having thus only one that is fully aware of Intel PT during parsing and object creation.
Besides, based on the feedback in https://reviews.llvm.org/D88769, I'm creating a ThreadIntelPT class that will be able to orchestrate decoding of its own trace and can handle the stop events correctly.
This leaves the TraceIntelPT class as an initialization class that glues together different components. Right now it can initialize a trace session from a json file, and in the future will be able to initialize a trace session from a live process.
Besides, I'm renaming SettingsParser to SessionParser, which I think is a better name, as the json object represents a trace session of possibly many processes.
With the current set of targets, we have the following
- Trace: main interface for dealing with trace sessions
- TraceIntelPT: plugin Trace for dealing with intel pt sessions
- TraceIntelPTSessionParser: a parser of a json trace session file that can create a corresponding TraceIntelPT instance along with Targets, ProcessTraces (to be created in https://reviews.llvm.org/D88769), and ThreadIntelPT threads.
- ProcessTrace: (to be created in https://reviews.llvm.org/D88769) can handle the correct state of the traces as the user traverses the trace. I don't think there'll be a need an intel-pt specific implementation of this class.
- ThreadIntelPT: a thread implementation that can handle the decoding of its own trace file, along with keeping track of the current position the user is looking at when doing reverse debugging.
Differential Revision: https://reviews.llvm.org/D88841
The problem here is in the "sliding" code in
ValueObjectChild::UpdateValue. It modifies m_bitfield_bit_offset and
m_value to ensure the bitfield value fits the window given by the
underlying type.
However, this is broken next time UpdateValue is called, because it
updates the m_value value from the parent. However, the value cannot be
slid again because the m_bitfield_bit_offset is already modified.
It seems this can happen only under specific circumstances. One way to
trigger is is to run an expression which can be interpreted (jitting it
causes a new StackFrame and ValueObject variables to be created).
I fix this bug by modifying m_byte_offset instead of m_scalar, and
ensuring the changes are folded into m_scalar regardless of how many
times UpdateValue is called.
Differential Revision: https://reviews.llvm.org/D88992
This patch fixes a few issues seen when running `ninja check-lldb` in a Release build with VS2017:
- Some binaries couldn't be found (such as lldb-vscode.exe), because .exe wasn't appended to the file name.
- Many tests used to fail since our installed locale is in French - the OS error messages are not emitted in English.
- Our codepage being Windows-1252, python failed to decode some error messages with accentuations.
Differential Revision: https://reviews.llvm.org/D88975
Add a new FreeBSD Process plugin using client/server model. This plugin
is based on the one used by NetBSD. It currently supports a subset
of functionality for amd64. It is automatically used when spawning
lldb-server. It can also be used by lldb client by setting
FREEBSD_REMOTE_PLUGIN environment variable (to any value).
The code is capable of debugging simple single-threaded programs. It
supports general purpose, debug and FPU registers (up to XMM) of amd64,
basic signalling, software breakpoints.
Adding the support for the plugin involves removing some dead code
from FreeBSDPlatform plugin (that was not ever used because
CanDebugProcess() returned false), and replacing it with appropriate
code from NetBSD platform support.
Differential Revision: https://reviews.llvm.org/D88796
This was looking at the privateState, but it's possible that
the actual process has started up and then stopped again by the
time we get to the check, which would lead us to get out of running
the stop hooks too early.
Instead we need to track the intention of the stop hooks directly.
Differential Revision: https://reviews.llvm.org/D88753
Add preconditions to `TestBase.expect()` that catch semantically invalid calls
that happen to succeed anyway. This also fixes the broken callsites caught by
these checks.
This prevents the following incorrect calls:
1. `self.expect("lldb command", "some substr")`
2. `self.expect("lldb command", "assert message", "some substr")`
Differential Revision: https://reviews.llvm.org/D88792
This reverts commit c65627a1fe.
The test immediately after the new invalid symbol test was
failing on Windows. This was because when we called
VirtualQueryEx to get the region info for 0x0,
even if it succeeded we would call GetLastError.
Which must have picked up the last error that was set while
trying to lookup "not_an_address". Which happened to be 2.
("The system cannot find the file specified.")
To fix this only call GetLastError when we know VirtualQueryEx
has failed. (when it returns 0, which we were also checking for anyway)
Also convert memory region to an early return style
to make the logic clearer.
Reviewed By: labath, stella.stamenova
Differential Revision: https://reviews.llvm.org/D88229
Darwin seems to use stmmN instead of stN. Use a regex to accept both.
Also try to actually clear st(7).
Differential revision: https://reviews.llvm.org/D88795
Add a partial read/write tests for x87 FPU registers. This includes
reading and writing ST registers, control registers and floating-point
exception data registers (fop, fip, fdp).
The tests assume the current (roughly incorrect) behavior of reporting
the 'abridged' 8-bit ftag state as 16-bit ftag. They also assume Linux
plugin behavior of reporting fip/fdp split into halves as (fiseg, fioff)
and (foseg, fooff).
Differential Revision: https://reviews.llvm.org/D88583
This seems to fail on ubuntu 18.04.5 with Clang 9 due to:
Error output:
error: Couldn't lookup symbols:
std::__1::default_delete<int>::operator()(int) const
This test seems to randomly fail on Linux machines. It's only one part of the
test failing randomly, so let's just skip it instead of reverting the whole
patch (again).
Matt's change to the register allocator in 89baeaef2f changed where we
end up after the `finish`. Before we'd end up on line 4.
* thread #1, queue = 'com.apple.main-thread', stop reason = step out
Return value: (int) $0 = 1
frame #0: 0x0000000100003f7d a.out`main(argc=1, argv=0x00007ffeefbff630) at main.c:4:3
1 extern int func();
2
3 int main(int argc, char **argv) {
-> 4 func(); // Break here
5 func(); // Second
6 return 0;
7 }
Now, we end up on line 5.
* thread #1, queue = 'com.apple.main-thread', stop reason = step out
Return value: (int) $0 = 1
frame #0: 0x0000000100003f8d a.out`main(argc=1, argv=0x00007ffeefbff630) at main.c:5:3
2
3 int main(int argc, char **argv) {
4 func(); // Break here
-> 5 func(); // Second
6 return 0;
7 }
Given that this is not expected stable to be stable I've made the test a
bit more lenient to accept both scenarios.
Also, use the StructuredData::Dump method to print the StructuredData if there
is no plugin, rather than just returning an error.
Differential Revision: https://reviews.llvm.org/D88266
Per the DAP spec for SetBreakpoints [1], the way to clear breakpoints is: `To clear all breakpoint for a source, specify an empty array.`
However, leaving the breakpoints field unset is also a well formed request (note the `breakpoints?:` in the `SetBreakpointsArguments` definition). If it's unset, we have a couple choices:
1. Crash (current behavior)
2. Clear breakpoints
3. Return an error response that the breakpoints field is missing.
I propose we do (2) instead of (1), and treat an unset breakpoints field the same as an empty breakpoints field.
[1] https://microsoft.github.io/debug-adapter-protocol/specification#Requests_SetBreakpoints
Reviewed By: wallace, labath
Differential Revision: https://reviews.llvm.org/D88513
When running in an ipv6-only environment where `AF_INET` sockets are not available, many lldb tests (mostly gdb remote tests) fail because things like `127.0.0.1` don't work there.
Use `localhost` instead of `127.0.0.1` whenever possible, or include a fallback of creating `AF_INET6` sockets when `AF_INET` fails.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87333
Rather than relaying on CMake to substitute the full path to the lldb
source root, use the value set in config.lldb_src_root. This makes it
slightly easier to write a custom lit.site.cfg.py.
This reverts commit f775fe5964.
I fixed a return type error in the original patch that was causing a test failure.
Also added a REQUIRES: python to the shell test so we'll skip this for
people who build lldb w/o Python.
Also added another test for the error printing.
Configuring the variable in CMake isn't enought, because the build mode
can't be resolved until execution time, which requires the build mode to
be substituted by lit.
With the recent patches to the ASTImporter that improve template type importing
(D87444), most of the import-std-module tests can now finally import the
type of the STL container they are testing. This patch removes most of the casts
that were added to simplify types to something the ASTImporter can import
(for example, std::vector<int>::size_type was casted to `size_t` until now).
Also adds the missing tests that require referencing the container type (for
example simply printing the whole container) as here we couldn't use a casting
workaround.
The only casts that remain are in the forward_list tests that reference
the iterator and the stack test. Both tests are still failing to import the
respective container type correctly (or crash while trying to import).
Usually when we enter a SWIG wrapper function from Python, SWIG automatically
adds a `Py_BEGIN_ALLOW_THREADS`/`Py_END_ALLOW_THREADS` around the call to the SB
API C++ function. This will ensure that Python's GIL is released when we enter
LLDB and locked again when we return to the wrapper code.
D51569 changed this behaviour but only for the generated `__str__` wrappers. The
added `nothreadallow` disables the injection of the GIL release/re-acquire code
and the GIL is now kept locked when entering LLDB and is expected to be still
locked when returning from the LLDB implementation. The main reason for that was
that back when D51569 landed the wrapper itself created a Python string. These
days it just creates a std::string and SWIG itself takes care of getting the GIL
and creating the Python string from the std::string, so that workaround isn't
necessary anymore.
This patch just removes `nothreadallow` so that our `__str__` functions now
behave like all other wrapper functions in that they release the GIL when
calling into the SB API implementation.
The motivation here is actually to work around another potential bug in LLDB.
When one calls into the LLDB SB API while holding the GIL and that call causes
LLDB to interpret some Python script via `ScriptInterpreterPython`, then the GIL
will be unlocked when the control flow returns from the SB API. In the case of
the `__str__` wrapper this would cause that the next call to a Python function
requiring the GIL would fail (as SWIG will not try to reacquire the GIL as it
isn't aware that LLDB removed it).
The reason for this unexpected GIL release seems to be a workaround for recent
Python versions:
```
// The only case we should go further and acquire the GIL: it is unlocked.
if (PyGILState_Check())
return;
```
The early-exit here causes `InitializePythonRAII::m_was_already_initialized` to
be always false and that causes that `InitializePythonRAII`'s destructor always
directly unlocks the GIL via `PyEval_SaveThread`. I'm investigating how to
properly fix this bug in a follow up patch, but for now this straightforward
patch seems to be enough to unblock my other patches (and it also has the
benefit of removing this workaround).
The test for this is just a simple test for `std::deque` which has a synthetic
child provider implemented as a Python script. Inspecting the deque object will
cause `expect_expr` to create a string error message by calling
`str(deque_object)`. Printing the ValueObject causes the Python script for the
synthetic children to execute which then triggers the bug described above where
the GIL ends up being unlocked.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D88302
Michał Górny