Summary:
Most CPUs implementing AES fusion require instruction pairs of the form
AESE Vn, _
AESMC Vn, Vn
and
AESD Vn, _
AESIMC Vn, Vn
The constraint is added to AES(I)MC instructions which use the result of
an AES(E|D) instruction by using AES(I)MCTrr pseudo instructions, which
constraint source and destination registers to be the same.
A nice side effect of this change is that now all possible pairs are
scheduled back-to-back on the exynos-m1 for the misched-fusion-aes.ll
test case.
I had to update aes_load_store. The version I added initially was very
reduced and with the new constraint, AESE/AESMC could not be scheduled
back-to-back. I updated the test to be more realistic and still expose
the same scheduling problem as the initial test case.
Reviewers: t.p.northover, rengolin, evandro, kristof.beyls, silviu.baranga
Reviewed By: t.p.northover, evandro
Subscribers: aemerson, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D35299
llvm-svn: 309495
In COFF, a symbol offset can't be stored in the relocation (as is
done in ELF or MachO), but is stored as the immediate in the
instruction itself. The immediate in the ADRP thus is the symbol
offset in bytes, not in pages. For the PAGEOFFSET_12A/L relocations,
ignore any offset outside of the lowest 12 bits; they won't have any
effect on the ADD/LDR/STR instruction itself but only on the associated
ADRP.
This is similar to how the same issue is handled for MOVW/MOVT
instructions in ELF (see e.g. SVN r307713, and r307728 in lld).
This fixes "fixup out of range" errors while building larger object
files, where temporary symbols end up as a plain section symbol and
an offset, and fixes any cases where the symbol offset mean that
the actual target ended up on a different page than the symbol
itself.
Differential Revision: https://reviews.llvm.org/D35791
llvm-svn: 309105
Summary:
Some SPARC TLS relocations were applying nontrivial adjustments
to zero value, leading to unexpected non-zero values in ELF and then
Solaris linker failures.
Getting rid of these adjustments.
Fixes PR33825.
Reviewers: rafael, asb, jyknight
Subscribers: joerg, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D35567
llvm-svn: 308978
The soffset field needs to be be set to 0x7f to disable it,
not 0. 0 is interpreted as an SGPR offset.
This should be enough to get basic usage of the global instructions
working. Technically it is possible to use an SGPR_32 offset,
but I'm not sure if it's correct with 64-bit pointers, but
that is not handled now. This should also be cleaned up
to be more similar to how different MUBUF modes are handled,
and to have InstrMappings between the different types.
llvm-svn: 308583
This generalizes an existing fix from ELF to MachO and COFF.
Test that an ADRP to a local symbol whose offset is known at assembly
time still produces relocations, both for MachO and COFF. Test that
an ADRP without a @page modifier on MachO fails (previously it
didn't).
Differential Revision: https://reviews.llvm.org/D35544
llvm-svn: 308518
This patch cleans up and fixes issues in the M-Class system register handling:
1. It defines the system registers and the encoding (SYSm values) in one place:
a new ARMSystemRegister.td using SearchableTable, thereby removing the
hand-coded values which existed in multiple places.
2. Some system registers e.g. BASEPRI_MAX_NS which do not exist were being allowed!
Ref: ARMv6/7/8M architecture reference manual.
Reviewed by: @t.p.northover, @olist01, @john.brawn
Differential Revision: https://reviews.llvm.org/D35209
llvm-svn: 308456
This adds support for the new 128-bit vector float instructions of z14.
Note that these instructions actually only operate on the f128 type,
since only each 128-bit vector register can hold only one 128-bit
float value. However, this is still preferable to the legacy 128-bit
float instructions, since those operate on pairs of floating-point
registers (so we can hold at most 8 values in registers), while the
new instructions use single vector registers (so we hold up to 32
value in registers).
Adding support includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions. This includes allocating the f128
type now to the VR128BitRegClass instead of FP128BitRegClass.
- Scheduler description support for the instructions.
Note that for a small number of operations, we have no new vector
instructions (like integer <-> 128-bit float conversions), and so
we use the legacy instruction and then reformat the operand
(i.e. copy between a pair of floating-point registers and a
vector register).
llvm-svn: 308196
This adds support for the new 32-bit vector float instructions of z14.
This includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions, including new LLVM intrinsics.
- Scheduler description support for the instructions.
- Update to the vector cost function calculations.
In general, CodeGen support for the new v4f32 instructions closely
matches support for the existing v2f64 instructions.
llvm-svn: 308195
This patch series adds support for the IBM z14 processor. This part includes:
- Basic support for the new processor and its features.
- Support for new instructions (except vector 32-bit float and 128-bit float).
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of z14 as host processor.
Support for the new 32-bit vector float and 128-bit vector float
instructions is provided by separate patches.
llvm-svn: 308194
Summary:
Previously, CodeGen checked first src operand type to determine if omod is supported by instruction. This isn't correct for some instructions: e.g. V_CMP_EQ_F32 has floating-point src operands but desn't support omod.
Changed .td files to check if dst operand instead of src operand.
Reviewers: arsenm, vpykhtin
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D35350
llvm-svn: 308179
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
The last version of this patch broke one of the expensive checks buildbots,
this version changes the failing test/MC/Mips/mt/invalid.s and other invalid
tests to write the errors to a file and run FileCheck on that, rather than
relying on the 'not llvm-mc ... <%s 2>&1 | Filecheck %s' idiom.
Hopefully this will sarisfy the buildbot.
llvm-svn: 308023
The AsmParser mnemonic spell checker was introduced in r307148 and enabled only
for ARM. This patch enables it for AArch64.
Differential Revision: https://reviews.llvm.org/D35357
llvm-svn: 307918
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
llvm-svn: 307836
Summary:
This allows tools like lld that process relocations
to apply data relocation correctly. This information
is required because relocation are stored as section
offset.
Subscribers: jfb, dschuff, jgravelle-google, aheejin
Differential Revision: https://reviews.llvm.org/D35234
llvm-svn: 307741
Avoid duplicating DictScope with hand-written names everywhere. Print
the S_-prefixed symbol kind for every record. This should make it easier
to search for certain kinds of records when debugging PDB linking.
llvm-svn: 307732
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
This patch implements the .module and .set directives for the MT ASE,
notably that .module sets the relevant flags in .MIPS.abiflags and .set
doesn't.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35249
llvm-svn: 307716
For ELF, a movw+movt pair is handled as two separate relocations.
If an offset should be applied to the symbol address, this offset is
stored as an immediate in the instruction (as opposed to stored as an
offset in the relocation itself).
Even though the actual value stored in the movt immediate after linking
is the top half of the value, we need to store the unshifted offset
prior to linking. When the relocation is made during linking, the offset
gets added to the target symbol value, and the upper half of the value
is stored in the instruction.
This makes sure that movw+movt with offset symbols get properly
handled, in case the offset addition in the lower half should be
carried over to the upper half.
This makes the output from the additions to the test case match
the output from GNU binutils.
For COFF and MachO, the movw/movt relocations are handled as a pair,
and the overflow from the lower half gets carried over to the movt,
so they should keep the shifted offset just as before.
Differential Revision: https://reviews.llvm.org/D35242
llvm-svn: 307713
Preparatory work for adding the MIPS MT (multi-threading) ASE instructions.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35247
llvm-svn: 307679
This change allows the pc to be used as a destination register for the
pseudo instruction LDR pc,=expression . The pseudo instruction must not be
transformed into a MOV, but it can use the Thumb2 LDR (literal) instruction
to a constant pool entry. See (A7.7.43 from ARMv7M ARM ARM).
Differential Revision: https://reviews.llvm.org/D34751
llvm-svn: 307640
Summary: When implementing MCFillFragment, use the size of the fragment,
rather than the size of the section.
Patch by Dan Gohman
Differential Revision: https://reviews.llvm.org/D35090
llvm-svn: 307565
Model weakly defined symbols as symbols that are both
exports and imported and marked as weak. Local references
to the symbols refer to the import but the linker can
resolve this to the weak export if not strong symbol
is found at link time.
Differential Revision: https://reviews.llvm.org/D35029
llvm-svn: 307348
Florian Hahn