Previously PredicateControl in some cases was a member of <X>Inst classes
for some X (DSP, EVA) or was in more irregular place in the hierarchry
for any given instruction.
This patch moves PredicateControl down to the root so that it is consistently
available. Then correct the base class of microMIPS instructions as using
EncodingPredicates instead of the general Predicates field of Instruction.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D47526
llvm-svn: 333536
As part of this effort, duplicate and correct the predicates of some
aliases. Also disable code generation of some short form instructions
for FastISel, as it would otherwise reject them.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D47075
llvm-svn: 333530
There seems to be no real reason to have these separate copies.
The existing implementations just copy each other for x86.
For Mips there is a subtle difference, which is just a bug
since it changes based on the context where which one was called.
Dropping this version, all tests pass. If I try to merge them
to match the removed version, a test fails.
llvm-svn: 333440
Now LLVM assembler cannot process the following code and generates an
error. GNU tools support .set assignment directive with numeric register
name.
```
.set r4, 4
test.s:1:11: error: invalid token in expression
.set r4, $4
^
```
This patch teach assembler to handle such directives correctly.
Unfortunately a numeric register name cannot be represented as an
expression. That's why we have to maintain a separate `StringMap`
in the `MipsAsmParser` to keep mapping between aliases names and
register numbers.
Differential revision: https://reviews.llvm.org/D47464
llvm-svn: 333428
Emit R_MICROMIPS_GPREL16/R_MICROMIPS_SUB/R_MICROMIPS_LO16 and
R_MICROMIPS_GPREL16/R_MICROMIPS_SUB/R_MICROMIPS_HI16 chains of
relocations for %lo(%neg(%gp_rel())) and %hi(%neg(%gp_rel()))
expressions in case of microMIPS.
Differential Revision: http://reviews.llvm.org/D47220
llvm-svn: 333409
Emit R_MICROMIPS_HIGHER / R_MICROMIPS_HIGHEST relocations for %higher()
and %highest() expressions in case of microMIPS. These relocations do
exactly the same things as R_MIPS_HIGHER / R_MIPS_HIGHEST, but for
consistency it's better to write microMIPS variants.
Differential Revision: http://reviews.llvm.org/D47219
llvm-svn: 333407
Previously, their listed predicates were overridden at the scope level.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46947
llvm-svn: 333405
Before this fix the following code triggers two error messages. The
second one is at least useless:
test.s:1:9: error: expected identifier after .set
.set 123, $a0
^
test-set.s:1:9: error: unexpected token, expected comma
.set 123, $a0
^
llvm-svn: 333402
Rather than using a regpair operand of these instructions, use two seperate
operands and a custom converter to handle the implicit second register operand.
Additionally, remove the microMIPS32R6 definition as its redundant.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D47255
llvm-svn: 333288
r333093 introduced several warnings (-Wlogical-not-parentheses,
-Wbool-compare).
Adding parentheses in MipsSEInstrInfo::isCopyInstr() to silence it.
llvm-svn: 333097
This property is needed in order to follow values movement between
registers. This property is used in TII to implement method that
returns true if simple copy like instruction is recognized, along
with source and destination machine operands.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D45204
llvm-svn: 333093
MipsLongBranchPass and MipsHazardSchedule passes are joined to one pass
because of mutual conflict. When MipsHazardSchedule inserts 'nop's, it
potentially breaks some jumps, so they have to be expanded to long
branches. When some branch is expanded to long branch, it potentially
creates a hazard situation, which should be fixed by adding nops.
New pass is called MipsBranchExpansion, it combines these two passes,
and runs them alternately until one of them reports no changes were made.
Differential Revision: https://reviews.llvm.org/D46641
llvm-svn: 332977
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
MipsLongBranchPass and MipsHazardSchedule passes are joined to one pass
because of mutual conflict. When MipsHazardSchedule inserts 'nop's, it
potentially breaks some jumps, so they have to be expanded to long
branches. When some branch is expanded to long branch, it potentially
creates a hazard situation, which should be fixed by adding nops.
New pass is called MipsBranchExpansion, it combines these two passes,
and runs them alternately until one of them reports no changes were made.
Differential Revision: https://reviews.llvm.org/D46641
llvm-svn: 332834
Previously the compiler was using the microMIPSR3 variants, incorrectly.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46948
llvm-svn: 332820
The idea is that a client that wants split dwarf would create a
specific kind of object writer that creates two files, and use it to
create the streamer.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47050
llvm-svn: 332749
Add support for this target hook, covering MIPS, microMIPS and MIPSR6, along
with some tests. Also add missing getOppositeBranchOpc() cases exposed by the
tests.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46794
llvm-svn: 332446
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
This is a follow up to the rL330983. The patch teaches ld, sd, and lld
commands accept 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`. In fact, these commands should accept 64-bit offsets,
but so large offsets require another command expanding and will be
supported by a separate patch.
Differential Revision: https://reviews.llvm.org/D46629
llvm-svn: 331997
This is a follow up to the rL330983. The patch teaches lh and lhu
commands accepts 32-bit memory offsets by replacing `mem_simm16` operand
to `mem_simmptr`.
Differential Revision: https://reviews.llvm.org/D46513
llvm-svn: 331996
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
Introduced a new pattern for matching splat.d explicitly.
Both splat.d and splati.d can now be generated from the @llvm.mips.splat.d
intrinsic depending on whether an immediate value has been passed.
Differential Revision: https://reviews.llvm.org/D45683
llvm-svn: 331771
And eliminatw the duplication of those instructions for microMIPS32r6.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D46117
llvm-svn: 331526
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
The previous version of this patch restricted the 'jal' instruction to MIPS and
microMIPSr3. microMIPS32r6 does not have this instruction and instead uses jal
as an alias for balc.
Original commit message:
> Reviewers: smaksimovic, atanasyan, abeserminji
>
> Differential Revision: https://reviews.llvm.org/D46114
>
llvm-svn: 331259
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Previously these instructions were unselectable and instead were generated
through the instruction mapping tables.
Reviewers: atanasyan, smaksimovic, abeserminji
Differential Revision: https://reviews.llvm.org/D46055
llvm-svn: 331165
These branches were previously unanalyzable and unselectable. Add them and
recognize how to generate their inverses.
Reviewers: smaksimovic, atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D46113
llvm-svn: 331050
This patch makes compiler does not fuse fmul and fadd/fsub into
fmadd/fmsub by default. Instead, -fp-contract=fast option can
be used when such behavior is desired.
Differential Revision: https://reviews.llvm.org/D46057
llvm-svn: 331033
`lb` and `lbu` commands accepts 16-bit signed offsets. But GAS accepts
larger offsets for these commands. If an offset does not fit in 16-bit
range, `lb` command is translated into lui/lb or lui/addu/lb series.
It's interesting that initially LLVM assembler supported this feature,
but later it was broken.
This patch restores support for 32-bit offsets. It replaces `mem_simm16`
operand for `LB` and `LBu` definitions by the new `mem_simmptr` operand.
This operand is intended to check that offset fits to the same size as
using for pointers. Later we will be able to extend this rule and
accepts 64-bit offsets when it is possible.
Some issues remain:
- The regression also affects LD, SD, LH, LHU commands. I'm going
to fix them by a separate patch.
- GAS accepts any 32-bit values as an offset. Now LLVM accepts signed
16-bit values and this patch extends the range to signed 32-bit offsets.
In other words, the following code accepted by GAS and still triggers
an error by LLVM:
```
lb $4, 0x80000004
# gas
lui a0, 0x8000
lb a0, 4(a0)
```
- In case of 64-bit pointers GAS accepts a 64-bit offset and translates
it to the li/dsll/lb series of commands. LLVM still rejects it.
Probably this feature has never been implemented in LLVM. This issue
is for a separate patch.
```
lb $4, 0x800000001
# gas
li a0, 0x8000
dsll a0, a0, 0x14
lb a0, 4(a0)
```
Differential Revision: https://reviews.llvm.org/D45020
llvm-svn: 330983
Correct the definitions of ei, di, eret, deret, wait, syscall and break.
Also provide microMIPS specific aliases to match the MIPS aliases.
Additionally correct the definition of the wait instruction so that
it is present in the instruction mapping tables.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D45939
llvm-svn: 330952
ISel is currently picking 'JAL' over 'JAL_MM' for calling a function when
targeting microMIPS. A later patch will correct this behaviour.
This patch extends the mechanism for transforming instructions into their short
delay to recognise 'JAL_MM' for transforming into 'JALS_MM'.
llvm-svn: 330825
This is part of fixing the instruction predicates for MIPS.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44212
This patch relands r327409, hopefully without the problematic part of the
tests that cause FileCheck to assert on the windows expensive checks bot.
llvm-svn: 330741
Current code does not check that a register number is in the 0-31 range.
Sometimes the parser checks that later for some kinds of instructions,
but that leads to unclear / incorrect error messages like that:
% cat test.s
.text
lb $4, 8($32)
% llvm-mc test.s -triple=mips64-unknown-linux
test.s:2:10: error: expected memory with 16-bit signed offset
lb $4, 8($32)
^
Sometimes the parser just crashes:
% cat test.s
.text
lw $4, 8($32)
% llvm-mc test.s -triple=mips64-unknown-linux
This patch resolves the problem by checking that register number after
'$' sign is in the 0-31 range. If the number is out of the range the
parser shows the `invalid register number` error, but treats invalid
register number as a normal one to continue parsing and catch other
possible errors.
Differential Revision: https://reviews.llvm.org/D45919
llvm-svn: 330732
Guard the MIPS64 variant correctly for i64, mark the MIPS32 version as not
in microMIPS and provide the microMIPS version.
Additionally, remove a related stale XFAIL'd test as bswap has its own test
case providing coverage.
Reviewers: smaksimovic, abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D45816
llvm-svn: 330705
These instructions lacked the correct predicates, were not marked
as loads and stores and lacked the proper instruction mapping information.
In the case of microMIPS sw(l|r)e (EVA) these instructions were using the load
EVA description.
Reviewers: abeserminji, smaksimovic, atanasyan
Differential Revision: https://reviews.llvm.org/D45626
llvm-svn: 330326
Previously, the MIPS backend would alwyas break down constant multiplications
into a series of shifts, adds, and subs. This patch changes that so the cost of
doing so is estimated.
The cost is estimated against worst case constant materialization and retrieving
the results from the HI/LO registers.
For cases where the value type of the multiplication is not legal, the cost of
legalization is estimated and is accounted for before performing the
optimization of breaking down the constant
This resolves PR36884.
Thanks to npl for reporting the issue!
Reviewers: abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D45316
llvm-svn: 330037
Add the minimal support necessary to lower a function that returns the
sum of two i32 values.
Support argument/return lowering of i32 values through registers only.
Add tablegen for regbankselect and instructionselect.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D44304
llvm-svn: 329819
Summary:
Replace ArrayRefs by actual std::array objects so that there are
no dangling references.
Reviewers: rsmith, gkistanova
Subscribers: sdardis, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D45338
llvm-svn: 329359
For schedule models that don't use itineraries, checkCompleteness still checks that an instruction has a matching itinerary instead of skipping and going straight to matching the InstRWs. That doesn't seem to match what happens in TargetSchedule.cpp
This patch causes problems for a number of models that had been incorrectly flagged as complete.
Differential Revision: https://reviews.llvm.org/D43235
llvm-svn: 329280
Makes it easier to see mistakes such as the one fixed in r329178 and makes
the different target CMakeLists more consistent.
Also remove some stale-looking comments from the Nios2 target cmakefile.
No intended behavior change.
llvm-svn: 329181
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: sdardis, RKSimon, dsanders, atanasyan
Reviewed By: atanasyan
Subscribers: atanasyan, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D44869
llvm-svn: 328815
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
I believe the role of ehDataReg has been replaced by MipsABIInfo::GetEhDataReg, thus removing the dead code.
Patch By: Wei-Ren Chen.
Reviewers: ehostunreach, sdardis
Differential Revision: https://reviews.llvm.org/D44867
llvm-svn: 328767
Summary:
I recently added a new Fixup kind to our fork of LLVM but forgot to add
it to the table in MipsAsmBackend.cpp. With this static_assert the error
would have been caught instead of zero-initializing the array entries for
the new fixups.
Reviewers: sdardis, atanasyan
Reviewed By: atanasyan
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44895
llvm-svn: 328616
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
This is similar to the check later when we remap some of the instructions from one class to a new one. But if we reuse the class we don't get to do that check.
So many CPUs have violations of this check that I had to add a flag to the SchedMachineModel to allow it to be disabled. Hopefully we can get those cleaned up quickly and remove this flag.
A lot of the violations are due to overlapping regular expressions, but that's not the only kind of issue it found.
llvm-svn: 327808
This is part of fixing the instruction predicates for MIPS.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44212
llvm-svn: 327409
For the MIPS O32 ABI, the current call lowering logic naively lowers each
call, creating the reserved argument area to hold the argument spill areas for
$a0..$a3 and the outgoing parameter area if one is required at each call site.
In the case of a sufficently large byval argument, a call to memcpy is used
to write the start+16..end of the argument into the outgoing parameter area.
This is done within the CALLSEQ_START..CALLSEQ_END of the callee. The CALLSEQ
nodes are responsible for performing the necessary stack adjustments.
Since the O32/N32/N64 MIPS ABIs do not have a red-zone and writing below the
stack pointer and reading the values back is unpredictable, the call to memcpy
cannot be hoisted out of the callee's CALLSEQ nodes.
However, for the O32 ABI requires the reserved argument area for functions
which have parameters. The naive lowering of calls will then create nested
CALLSEQ sequences. For N32 and N64 these nodes are also created, but with
zero stack adjustments as those ABIs do not have a reserved argument area.
This patch addresses the correctness issue by recognizing the special case
of lowering a byval argument that uses memcpy. By recognizing that the
incoming chain already has a CALLSEQ_START node on it when calling memcpy,
the CALLSEQ nodes are not created. For the N32 and N64 ABIs, this is not an
issue, as no stack adjustment has to be performed.
For the O32 ABI, the correctness reasoning is different. In the case of a
sufficently large byval argument, registers a0..a3 are going to be used for
the callee's arguments, mandating the creation of the reserved argument area.
The call to memcpy in the naive case will also create its own reserved
argument area. However, since the reserved argument area consists of undefined
values, both calls can use the same reserved argument area.
Reviewers: abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D44296
llvm-svn: 327388
This simplifies tagging instructions with the correct ISA and ASE, albeit making
instruction definitions a bit more verbose.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44299
llvm-svn: 327265
These instructions are defined as taking a GPR register and a
coprocessor register for ISAs up to MIPS32. MIPS32 extended the
definition to allow a selector--a value from 0 to 32--to access
another register.
These instructions are now internally defined as being MIPS-I
instructions, but are rejected for pre-MIPS32 ISA's if they have
an explicit selector which is non-zero. This deviates slightly from
GAS's behaviour which rejects assembly instructions with an
explicit selector for pre-MIPS32 ISAs.
E.g:
mfc0 $4, $5, 0
is rejected by GAS for MIPS-I to MIPS-V but will be accepted
with this patch for MIPS-I to MIPS-V.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D41662
llvm-svn: 326890
Emulated TLS is enabled by llc flag -emulated-tls,
which is passed by clang driver.
When llc is called explicitly or from other drivers like LTO,
missing -emulated-tls flag would generate wrong TLS code for targets
that supports only this mode.
Now use useEmulatedTLS() instead of Options.EmulatedTLS to decide whether
emulated TLS code should be generated.
Unit tests are modified to run with and without the -emulated-tls flag.
Differential Revision: https://reviews.llvm.org/D42999
llvm-svn: 326341
The MIPS backend has inconsistent usage of instruction predicates
for assembly and code generation. The issue arises from supporting three
encodings, two (MIPS and microMIPS) of which have a near 1:1 instruction
mapping across ISA revisions and a third encoding with a more restricted
set of instructions (MIPS16e).
To enforce consistent usage, each of the ISA_* adjectives has (or will
have) the relevant encoding attached to it along the relevant ISA revision
where the instruction is defined.
Each instruction, pattern or alias will then have the correct ISA adjective
attached to it, and the base instruction description classes will have any
predicates relating to ISA encoding or revision removed.
Pseudo instructions will also be guarded for the encoding or ABI that they are
supported in.
Finally, the hasStandardEncoding() / inMicroMipsMode() / inMips16Mode() methods
of MipsSubtarget will be changed such that only one can be true at any one time.
The result of this is that code generation and assembly will produce the
correct encoding up front, while code generated from pseudo instructions
and other inserted sequences of instructions will be able to rely on the mapping
tables to produce the correct encoding. This should fix numerous bugs where
the result 'happens' to be correct but has edge cases where microMIPS and MIPS
have subtle differences (e.g. microMIPSR6 using 'j', 'jal' instructions.)
This patch starts the process by changing most of the ISA adjectives to make
use of the EncodingPredicate member of PredicateControl. Follow on patches
will annotate instructions with their correct ISA adjective and eliminate
the usage of "let Predicates = [..]", "let AdditionalPredicates = [..]" and
"isCodeGenOnly = 1" in the cases where it was used to control instruction
availability.
Contributions from Nitesh Jain.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D41434
llvm-svn: 326322
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Add GlobalISel infrastructure up to the point where we can select a ret
void.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D43583
llvm-svn: 325888
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Simon Dardis
llvm-svn: 325870
There were no memory dependencies made between stores generated
when lowering formal arguments and loads generated when
call lowering byVal arguments which made the Post-RA scheduler
place a load before a matching store.
Make the fixed object stored to mutable so that the load
instructions can have their memory dependencies added
Set the frame object as isAliased which clears the underlying
objects vector in ScheduleDAGInstrs::buildSchedGraph().
This results in addition of all stores as dependenies for loads.
This problem appeared when passing a byVal parameter
coupled with a fastcc function call.
Differential Revision: https://reviews.llvm.org/D37515
llvm-svn: 325782
This patch provides mitigation for CVE-2017-5715, Spectre variant two,
which affects the P5600 and P6600. It implements the LLVM part of
-mindirect-jump=hazard. It is _not_ enabled by default for the P5600.
The migitation strategy suggested by MIPS for these processors is to use
hazard barrier instructions. 'jalr.hb' and 'jr.hb' are hazard
barrier variants of the 'jalr' and 'jr' instructions respectively.
These instructions impede the execution of instruction stream until
architecturally defined hazards (changes to the instruction stream,
privileged registers which may affect execution) are cleared. These
instructions in MIPS' designs are not speculated past.
These instructions are used with the attribute +use-indirect-jump-hazard
when branching indirectly and for indirect function calls.
These instructions are defined by the MIPS32R2 ISA, so this mitigation
method is not compatible with processors which implement an earlier
revision of the MIPS ISA.
Performance benchmarking of this option with -fpic and lld using
-z hazardplt shows a difference of overall 10%~ time increase
for the LLVM testsuite. Certain benchmarks such as methcall show a
substantially larger increase in time due to their nature.
Reviewers: atanasyan, zoran.jovanovic
Differential Revision: https://reviews.llvm.org/D43486
llvm-svn: 325653
An upcoming patch D41434, changes the ordering of the matcher table
for assembly. This patch corrects the definition of the normal MIPS
cvt.d.w not to be available in microMIPS.
llvm-svn: 325589
These instructions conflict with their full length variants
for the purposes of FastISel as they cannot be distingushed
based on the number and type of operands and predicates.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D41285
llvm-svn: 325341
In case of correct using of the 'l' constraint llvm now generates valid
code; otherwise it shows an error message. Initially these triggers an
assertion.
This commit is the same as r324869 with fixed the test's file name.
llvm-svn: 324885
In case of correct using of the 'l' constraint llvm now generates valid
code; otherwise it shows an error message. Initially these triggers an
assertion.
llvm-svn: 324869
Instructions affected:
mthc1, mfhc1, add.d, sub.d, mul.d, div.d,
mov.d, neg.d, cvt.w.d, cvt.d.s, cvt.d.w, cvt.s.d
These instructions are now defined for
microMIPS32r3 + microMIPS32r6 in MicroMipsInstrFPU.td
since they shared their encoding with those already defined
in microMIPS32r6InstrInfo.td and have been therefore
removed from the latter file.
Some instructions present in MicroMipsInstrFPU.td which
did not have both AFGR64 and FGR64 variants defined have
been altered to do so.
Differential revision: https://reviews.llvm.org/D42738
llvm-svn: 324584
Both operand codes now work the same way in case of register or memory
operands. It print high-order or low-order word in a double-word
register or memory location.
llvm-svn: 324476
This patch includes EVA instructions in the Std2MicroMips mapping
tables, which is required for direct object emission.
Differential Revision: https://reviews.llvm.org/D41771
llvm-svn: 323958
PR36061 showed that during the expansion of ISD::FPOWI, that there
was an incorrect zero extension of the integer argument which for
MIPS64 would then give incorrect results. Address this with the
existing mechanism for correcting sign extensions.
This resolves PR36061.
Thanks to James Cowgill for reporting the issue!
Reviewers: atanasyan, hfinkel
Differential Revision: https://reviews.llvm.org/D42537
llvm-svn: 323781
Previously some targets printed their own message at the start of Select to indicate what they were selecting. For the targets that didn't, it means there was no print of the root node before any custom handling in the target executed. So if the target did something custom and never called SelectNodeCommon, no print would be made. For the targets that did print a message in Select, if they didn't custom handle a node SelectNodeCommon would reprint the root node before walking the isel table.
It seems better to just print the message before the call to Select so all targets behave the same. And then remove the root node printing from SelectNodeCommon and just leave a message that says we're starting the table search.
There were also some oddities in blank line behavior. Usually due to a \n after a call to SelectionDAGNode::dump which already inserted a new line.
llvm-svn: 323551
- Alter abs for micromips to have both AFGR64 and FGR64
variants, same as sqrt
- Remove sqrt and abs from MicroMips32r6InstrInfo.td,
use micromips FGR64 variants
- Restrict non-micromips abs/sqrt with NotInMicroMips
predicate
Differential revision: https://reviews.llvm.org/D41439
llvm-svn: 323184
Dsp and dspr2 require MIPS revision 2, while msa requires revision 5. Adding
warnings for cases when these flags are used with earlier revision.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D40490
llvm-svn: 323131
Currently it's not possible to access MCSubtargetInfo from a TgtMCAsmBackend.
D20830 threaded an MCSubtargetInfo reference through
MCAsmBackend::relaxInstruction, but this isn't the only function that would
benefit from access. This patch removes the Triple and CPUString arguments
from createMCAsmBackend and replaces them with MCSubtargetInfo.
This patch just changes the interface without making any intentional
functional changes. Once in, several cleanups are possible:
* Get rid of the awkward MCSubtargetInfo handling in ARMAsmBackend
* Support 16-bit instructions when valid in MipsAsmBackend::writeNopData
* Get rid of the CPU string parsing in X86AsmBackend and just use a SubtargetFeature for HasNopl
* Emit 16-bit nops in RISCVAsmBackend::writeNopData if the compressed instruction set extension is enabled (see D41221)
This change initially exposed PR35686, which has since been resolved in r321026.
Differential Revision: https://reviews.llvm.org/D41349
llvm-svn: 321692
Initially, if the `c` constraint applied to the wrong data type that
causes LLVM to assert. This commit replaces the assert by an error
message.
llvm-svn: 321565
Re-land r321234. It had to be reverted because it broke the shared
library build. The shared library build broke because there was a
missing LLVMBuild dependency from lib/Passes (which calls
TargetMachine::getTargetIRAnalysis) to lib/Target. As far as I can
tell, this problem was always there but was somehow masked
before (perhaps because TargetMachine::getTargetIRAnalysis was a
virtual function).
Original commit message:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321375
Summary:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321234
This instruction is encoded as zero, so we have handle that case when checking
for unimplemented opcodes when producing the encoding for an instruction.
llvm-svn: 321066
Fix an off by one error in the bounds checking for 'dinsu' and update
the ranges in the test comments so that they are accurate.
This version has the correct commit message.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D41183
llvm-svn: 320991
Fix an off by one error in the bounds checking for 'dinsu' and update
the ranges in the test comments so that they are accurate.
Reviewers: atanasyan
https://reviews.llvm.org/D41183
llvm-svn: 320974
MIPSR6 introduced several new jump instructions and deprecated
the use of the 'j' instruction. For microMIPS32R6, 'j' was removed
entirely and it only has non delay slot jumps.
This patch adds support for MIPSR6 by using some R6 instructions--
'bc' instead of 'j', 'jic $reg, 0' instead of 'jalr $zero, $reg'--
and modifies the sequences not to use delay slots for R6.
Reviewers: atanasyan
Reviewed By: atanasyan
Subscribers: dschuff, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D40786
llvm-svn: 320703
Previously, v2i16 -> f32 bitcast could not be matched.
Add patterns to support matching this and similar types of bitcasts.
Differential revision: https://reviews.llvm.org/D40959
llvm-svn: 320562
All files and parts of files related to microMIPS4R6 are removed.
When target is microMIPS4R6, errors are printed.
This is LLVM part of patch.
Differential Revision: https://reviews.llvm.org/D35625
llvm-svn: 320350
Both had a declaration of EmitXRayTable, but there is no method defined in either with that name. There is a emitXRayTable in the base class with a lower case 'e' and they both call that.
llvm-svn: 320213
Roman Tereshin