Empty lines followed by line comments are often used to highlight the
comment. Empty lines somewhere else are usually left over from manual or
automatic formatting and should probably be removed.
Before (clang-format would keep):
S s = {
a,
b
};
After:
S s = { a, b };
llvm-svn: 176086
We might want to move towards doing this if the formatting can be
significantly improved, but we need to carefully evaluate the different
situations first.
Before (the string literal was split by clang-format here):
aaaaaaaaaaaaaaaaaaaa(aaaaaaaaaaaaaaaaaaaa, aaaaaa("aaa aaaaa aaa aaa aaaaa aaa "
"aaaaa aaa aaa aaaaaa"));
After:
aaaaaaaaaaaaaaaaaaaa(
aaaaaaaaaaaaaaaaaaaa,
aaaaaa("aaa aaaaa aaa aaa aaaaa aaa aaaaa aaa aaa aaaaaa"));
llvm-svn: 176084
This fixes llvm.org/PR15350.
Before:
Constructor(int Parameter = 0)
: aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa(aaaaaaaaaaaaaaaaa),
aaaaaaaaaaaa(aaaaaaaaaaaaaaaaa) {}
After:
Constructor(int Parameter = 0)
: aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa(aaaaaaaaaaaaaaaaa),
aaaaaaaaaaaa(aaaaaaaaaaaaaaaaa) {}
I think the correct solution is to put the VariablePos into
ParenState, not LineState. Added FIXME.
llvm-svn: 176027
TemplateSpecializationType doesn't quite have getDecl(). Need to go
through TemplateName to get a TemplateDecl.
Added test cases for the hasDeclaration() overload for
TemplateSpecializationType. Also introduced the type matcher
templateSpecializationType() used by the new hasDeclaration() test case.
Updated LibASTMatchersReference.
Reviewers: klimek
llvm-svn: 176025
Re-introducing r175532. The has_getDecl metafunction didn't compile with
Visual Studio. This revision uses approaches has_getDecl from a
different angle that isn't a problem for Visual Studio.
Added dedicated tests for the metafunction.
Reviewers: klimek
llvm-svn: 176024
Re-introducing r175532. The has_getDecl metafunction didn't compile with Visual
Studio. This revision approaches has_getDecl from a different angle that isn't
a problem for Visual Studio.
Added dedicated tests for the metafunction.
Reviewers: klimek
llvm-svn: 176019
In conditional expressions, if the condition is split over multiple
lines, also break before both operands.
This prevents formattings like:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa ==
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa ? b : c;
Which are bad, because they suggestion incorrect operator precedence:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa ==
(aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa ? b : c);
This lead to the discovery that the expression parser incorrectly
handled conditional operators and that it could also handle semicolons
(which in turn reduced the amount of special casing for for-loops). As a
side-effect, we can now apply the bin-packing configuration to the
sections of for-loops.
llvm-svn: 175973
Also don't break in long include directives as that is not desired.
We can now format:
#include "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaa"
#define LL_FORMAT "ll"
printf("aaaaa: %d, bbbbbbbbb: %" LL_FORMAT "d, cccccccc: %" LL_FORMAT
"d, ddddddddd: %" LL_FORMAT "d\n");
Before, this led to weird results.
llvm-svn: 175959
Add an ability to specify custom documentation block comment commands via a new
class CommentOptions. The intention is that this class will hold future
customizations for comment parsing, including defining documentation comments
with specific numbers of parameters, etc.
CommentOptions instance is a member of LangOptions.
CommentOptions is controlled by a new command-line parameter
-fcomment-block-commands=Foo,Bar,Baz.
llvm-svn: 175892
This fixes llvm.org/PR15033.
Also: Always break before a parameter, if the previous parameter was
split over multiple lines. This was necessary to make the right
decisions in for-loops, almost always makes the code more readable and
also fixes llvm.org/PR14873.
Before:
for (llvm::ArrayRef<NamedDecl *>::iterator I = FD->getDeclsInPrototypeScope()
.begin(), E = FD->getDeclsInPrototypeScope().end();
I != E; ++I) {
}
foo(bar(bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb,
ccccccccccccccccccccccccccccc), d, bar(e, f));
After:
for (llvm::ArrayRef<NamedDecl *>::iterator
I = FD->getDeclsInPrototypeScope().begin(),
E = FD->getDeclsInPrototypeScope().end();
I != E; ++I) {
}
foo(bar(bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb,
ccccccccccccccccccccccccccccc),
d, bar(e, f));
llvm-svn: 175741
We now indent the following correctly:
1. some + "literal" /* comment */
"literal";
2. breaking string literals after which we have another string literal.
llvm-svn: 175628
If the code author decides to put empty lines anywhere into the code we
should treat them equally, i.e. reduce them to the configured
MaxEmptyLinesToKeep.
With this change, we e.g. keep the newline in:
SomeType ST = {
// First value
a,
// Second value
b
};
llvm-svn: 175620
An alternative strategy to calculating the break on demand when hitting
a token that would need to be broken would be to put all possible breaks
inside the token into the optimizer.
Currently only supports breaking at spaces; more break points to come.
llvm-svn: 175613
Using a new metafunction for detecting the presence of the member
'getDecl' in a type T, added support to hasDeclaration for any such type
T. This allows hasDecl() to be replaced and enables several other
subclasses of clang::Type to use hasDeclaration.
Updated unittests and LibASTMatchersReference.html.
Reviewers: klimek
llvm-svn: 175532
In builder-type calls, it can be very confusing to just indent
parameters from the start of the line. Instead, indent 4 from the
correct function call.
Before:
aaaaaaaaaaaaaaaaaaa()->aaaaaa(bbbbb)->aaaaaaaaaaaaaaaaaaa( // break
aaaaaaaaaaaaaa);
aaaaaaaaaaaaaaaaaaaaaaa *aaaaaaaaa = aaaaaa->aaaaaaaaaaaa()->aaaaaaaaaaaaaaaa(
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa)
->aaaaaaaaaaaaaaaaa();
After:
aaaaaaaaaaaaaaaaaaa()->aaaaaa(bbbbb)->aaaaaaaaaaaaaaaaaaa( // break
aaaaaaaaaaaaaa);
aaaaaaaaaaaaaaaaaaaaaaa *aaaaaaaaa = aaaaaa->aaaaaaaaaaaa()
->aaaaaaaaaaaaaaaa(
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa)
->aaaaaaaaaaaaaaaaa();
llvm-svn: 175444
An unwrapped line can get moved around if there is no newline before
it and the previous line was formatted.
Example:
template<typename T> // Cursor is on this line when hitting "format"
T *getFETokenInfo() const { return static_cast<T*>(FETokenInfo); }
"return .." is the second unwrapped line in this scenario. I does not
touch any reformatted region. Thus, the result of formatting is:
template <typename T> T *getFETokenInfo() const { return static_cast<T *>(FETokenInfo); }
After second format (and arguably desired end-result):
template <typename T> T *getFETokenInfo() const {
return static_cast<T *>(FETokenInfo);
}
This fixes: llvm.org/PR15060.
llvm-svn: 175440
This fixes llvm.org/PR15248.
Before:
Test::Test(int b) : a(b *b) {}
for (int i = 0; i < a *a; ++i) {}
After:
Test::Test(int b) : a(b * b) {}
for (int i = 0; i < a * a; ++i) {}
llvm-svn: 175439
The current heuristic assumes that there can't be binary operators in
builder-type calls (excluding assigments). However, it also excluded
< and > in general, which is wrong. Now they are only excluded if they
are template parameters.
Before:
return aaaaaaaaaaaaaaaaa->aaaaa().aaaaaaaaaaaaa()i
.aaaaaa() < aaaaaaaaaaaaaaaaaaa->aaaaa().aaaaaaaaaaaaa().aaaaaa();
After:
return aaaaaaaaaaaaaaaaa->aaaaa().aaaaaaaaaaaaa().aaaaaa() <
aaaaaaaaaaaaaaaaaaa->aaaaa().aaaaaaaaaaaaa().aaaaaa();
llvm-svn: 175291
This got lost and was untested as the same effect is achieved by
avoiding bin packing, which is active in Google style by default.
However, moving forward, we want more control over the bin packing
option(s) and thus, this flag should work as expected.
llvm-svn: 175277
This is almost always more readable.
Before:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
? aaaaaaaaaaaaaaaaaaaaaaaaaaa : aaaaaaaaaaaaaaaaaaaaaaaaaaa;
After:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
? aaaaaaaaaaaaaaaaaaaaaaaaaaa
: aaaaaaaaaaaaaaaaaaaaaaaaaaa;
llvm-svn: 175262
Before:
aaaaaaaaaaaaaaaaaaaaaaaa(aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()
.aaaaaaaaaaaaaaaaa());
After:
aaaaaaaaaaaaaaaaaaaaaaaaa(
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa().aaaaaaaaaaaaaaaaa());
Not sure which of the formattings above is better, but we should not pick
one by accident.
llvm-svn: 175165
This gives a clearer separation of the context, e.g. in GMOCK
statements.
Before:
EXPECT_CALL(SomeObject,
SomeFunction(Parameter)).WillRepeatedly(Return(SomeValue));
After:
EXPECT_CALL(SomeObject, SomeFunction(Parameter))
.WillRepeatedly(Return(SomeValue));
Minor format cleanups.
llvm-svn: 175162
So far, clang-format has always assumed the whitespace belonging to the
subsequent token. This has the negative side-effect that when
clang-format formats a line, it does not remove its trailing whitespace,
as it belongs to the next token.
Thus, this patch fixes most of llvm.org/PR15062.
We are not zapping a file's trailing whitespace so far, as this does not
belong to any token we see during formatting. We need to fix this in a
subsequent patch.
llvm-svn: 175152
The formatter can now format:
void aaaaaaaaaaaaaaaaaa(int level,
double *min_x,
double *max_x,
double *min_y,
double *max_y,
double *min_z,
double *max_z, ) {
}
Although this is invalid code, it frequently happens during development and
clang-format should be nicer :-).
llvm-svn: 175151
This fixes llvm.org/PR15179.
Before:
class ColorChooserMac : public content::ColorChooser,
public content::WebContentsObserver {
};
After:
class ColorChooserMac : public content::ColorChooser,
public content::WebContentsObserver {
};
llvm-svn: 175147
This has so far been disabled for Google style, but should be done
before breaking at nested name specifiers or in template parameters.
Before (in Google style):
template <typename T>
aaaaaaaa::aaaaa::aaaaaa<T, aaaaaaaaaaaaaaaaaaaaaaaaa> aaaaaaaaaaaaaaaaaaaaaaaa<
T>::aaaaaaa() {}
After:
template <typename T>
aaaaaaaa::aaaaa::aaaaaa<T, aaaaaaaaaaaaaaaaaaaaaaaaa>
aaaaaaaaaaaaaaaaaaaaaaaa<T>::aaaaaaa() {}
llvm-svn: 175074
Daniel Jasper