Now libc++ pipeline will be triggered from the "premerge-checks" and the
combined result are going to be returned to Harbormaster.
Reviewed-by: ldionne
Differential Revision: https://reviews.llvm.org/D89113
Prior to this patch, we would generate a fancy <__config> header by
concatenating <__config_site> and <__config>. This complexifies the
build system and also increases the difference between what's tested
and what's actually installed.
This patch removes that complexity and instead simply installs <__config_site>
alongside the libc++ headers. <__config_site> is then included by <__config>,
which is much simpler. Doing this also opens the door to having different
<__config_site> headers depending on the target, which was impossible before.
It does change the workflow for testing header-only changes to libc++.
Previously, we would run `lit` against the headers in libcxx/include.
After this patch, we run it against a fake installation root of the
headers (containing a proper <__config_site> header). This makes use
closer to testing what we actually install, which is good, however it
does mean that we have to update that root before testing header changes.
Thus, we now need to run `ninja check-cxx-deps` before running `lit` by
hand.
This commit was originally applied in 1e46d1aa3 and reverted in eb60c487
because it broke the libc++abi and libunwind test suites. This has now
been fixed.
Differential Revision: https://reviews.llvm.org/D89041
Prior to this patch, we would generate a fancy <__config> header by
concatenating <__config_site> and <__config>. This complexifies the
build system and also increases the difference between what's tested
and what's actually installed.
This patch removes that complexity and instead simply installs <__config_site>
alongside the libc++ headers. <__config_site> is then included by <__config>,
which is much simpler. Doing this also opens the door to having different
<__config_site> headers depending on the target, which was impossible before.
It does change the workflow for testing header-only changes to libc++.
Previously, we would run `lit` against the headers in libcxx/include.
After this patch, we run it against a fake installation root of the
headers (containing a proper <__config_site> header). This makes use
closer to testing what we actually install, which is good, however it
does mean that we have to update that root before testing header changes.
Thus, we now need to run `ninja check-cxx-deps` before running `lit` by
hand.
Differential Revision: https://reviews.llvm.org/D89041
This is defined both by libcxx/utils/libcxx/test/config.py (for
any windows target) and msvc_stdlib_force_include.h (when testing
specifically the MSVC C++ library).
The command line define (-D_CRT_SECURE_NO_WARNINGS) defines it to the
value 1; change the header define to match that.
Keeping both instances, to keep the fix for cases when not building
in cases that don't use config.py.
Also remove a comment about whether this can be removed; it can't at
least be removed altogether - doing that breaks a number of tests that
otherwise succeed.
Differential Revision: https://reviews.llvm.org/D89588
Use .string() instead of .native() in places where we want to combine
paths with std::string.
Convert some methods to take a fs::path as parameter instead of
std::string, for cases where they are called with paths as
parameters (which can't be implicitly converted to std::string if
the path's string_type is wstring).
Differential Revision: https://reviews.llvm.org/D89530
Define all the fuzzing tests in libcxx/test/libcxx/fuzzing, and get
rid of the ad-hoc libcxx/fuzzing directory, which wasn't properly
integrated with the build system or test suite.
As a fly-by change, this also reduces the dependencies of fuzzing tests
on large library components like <iostream>, to make them work on more
platforms.
This changes the checking for available locales to use one program that
iterates over argv to test multiple locale names instead of checking each
name with a separate executable.
This massively speeds up running individual tests using an SSH executor
(it can take up to 10 seconds to compile and run a single test in some
emulated environments) in case no locales are installed since then all
fallback names are tested idividually. But even on a native machine
this reduces the libc++ lit startup time by ~1-2 second for me on a machine
that does not have locale data installed.
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D88884
Some platforms, like several embedded platforms, do not provide a source
of randomness through a random device. This commit makes it possible to
build and test libc++ for such platforms, i.e. without std::random_device.
Surprisingly, the only functionality that doesn't work on such platforms
is std::random_device itself -- everything else in <random> still works,
one just has to find alternative ways to seed the PRNGs.
This simplifies the workflow for adding new feature-test macros for
contributors. Previously, they would have to move the generated <version>
header from a temporary directory to libc++'s include directory by hand.
This makes the behavior for the <version> header consistent with what's
done for the tests and the documentation.
To make sure we don't store a mutable object (which could be modified by
outside code without us noticing) as the cache key, we pickle the cache
key to get a byte stream. If two keys are unequal, we know for sure they
will not have the same pickling. And if they are equal, there's a large
chance they will have the same pickling. If they don't, we might end up
not reusing a cached entry when we could have, but at least the behavior
we'll have is semantically correct.
This significantly speeds up the configuration of libc++'s test suite
by making sure that we don't perform the same operations over and over
again.
Differential Revision: https://reviews.llvm.org/D89003
This is a cherrypick of the upstream fix commit ffe1342 onto
`llvm/utils/benchmark` and `libcxx/utils/google-benchmark`.
This adds CycleTimer implementation for M680x0, which simply
uses `gettimeofday` same as MIPS.
Differential Review: https://reviews.llvm.org/D88868
Some libc++ builds may want to disable support for the debug mode,
for example to reduce code size or because the current implementation
of the debug mode requires a global map. This commit adds the
LIBCXX_ENABLE_DEBUG_MODE CMake option and ties it into the test
suite.
It also adds a CI job to test this configuration going forward.
Differential Revision: https://reviews.llvm.org/D88923
In our CHERI Jenkins CI we need to pass `-F <custom_config_file>` to each
ssh/scp command to set various arguments such as the localhost port, usage
of controlmaster, etc. to speed up connections to our emulated QEMU systems.
For our specific use-case I could have also added a single --ssh-config-file
argument that can be used for both the scp and ssh commands, but being able
to pass arbitrary extra flags for both commands seems more flexible.
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D84097
This is flagged by PyCharm and can cause subtle bugs. While changing this
also re-sort the imports and add missing ones.
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D88816
This flag is the default in libtool on Darwin, and it's not supported
by llvm-libtool-darwin causing a build failure.
Differential Revision: https://reviews.llvm.org/D88449
The CONDUIT_TOKEN is already taken from the environment. Also, disable
reporting back to Phabricator for now until we're ready to start spamming
the results back. This still needs a bit of testing.
This commit adds basic files and scripts that are used for the Buildkite
pre-commit CI setup. This was tested to mostly work on a fork of llvm-project,
however some adjustments will have to be made as we complete the real
setup.
This commit adds std::construct_at, and marks various members of
std::allocator_traits and std::allocator as constexpr. It also adds
tests and turns the existing tests into hybrid constexpr/runtime tests.
Thanks to Richard Smith for initial work on this, and to Michael Park
for D69803, D69132 and D69134, which are superseded by this patch.
Differential Revision: https://reviews.llvm.org/D68364
Instead, use with_system_cxx_lib with various compile-only tests to ensure
that we're getting compile-time errors, as expected. This follows the
lead of ec46cfefe8.
Target triples may contain a dash in the platform name (e.g.
"aarch64-arm-none-eabi"). Account for it when splitting the triple
into components.
Reviewed By: ldionne, #libc
Differential Revision: https://reviews.llvm.org/D87508
The needs of back-deployment testing currently require two different
ways of running the test suite: one based on the deployment target,
and one based on the target triple. Since the triple includes all the
information we need, it's better to have just one way of doing things.
Furthermore, `--param platform=XXX` is also supersedded by using the
target triple. Previously, this parameter would serve the purpose of
controling XFAILs for availability markup errors, however it is possible
to achieve the same thing by using with_system_cxx_lib only and using
.verify.cpp tests instead, as explained in the documentation changes.
The motivation for this change is twofold:
1. This part of the Lit config has always been really confusing and
complicated, and it has been a source of bugs in the past. I have
simplified it iteratively in the past, but the complexity is still
there.
2. The deployment-target detection started failing in weird ways in
recent Clangs, breaking our CI. Instead of band-aid patching the
issue, I decided to remove the complexity altogether by using target
triples even on Apple platforms.
A follow-up to this commit will bring the test suite in line with
the recommended way of handling availability markup tests.
Louis Dionne