Changing to 'or' (rather than 'xor' when no wrapping flags are set)
allows icmp simplifies to happen as expected.
Differential Revision: https://reviews.llvm.org/D29729
llvm-svn: 295574
This is necessary to avoid warnings from GCC.
InstCombineLoadStoreAlloca.cpp:238:7: error: 'PointerReplacer' declared
with greater visibility than the type of its field 'PointerReplacer::IC'
llvm-svn: 294794
For function-scope variables with large initialisation list, FE usually
generates a global variable to hold the initializer, then generates
memcpy intrinsic to initialize the alloca. InstCombiner::visitAllocaInst
identifies such allocas which are accessed only by reading and replaces
them with the global variable. This is done by casting the global variable
to the type of the alloca and replacing all references.
However, when the global variable is in a different address space which
is disjoint with addr space 0 (e.g. for IR generated from OpenCL,
global variable cannot be in private addr space i.e. addr space 0), casting
the global variable to addr space 0 results in invalid IR for certain
targets (e.g. amdgpu).
To fix this issue, when the global variable is not in addr space 0,
instead of casting it to addr space 0, this patch chases down the uses
of alloca until reaching the load instructions, then replaces load from
alloca with load from the global variable. If during the chasing
bitcast and GEP are encountered, new bitcast and GEP based on the global
variable are generated and used in the load instructions.
Differential Revision: https://reviews.llvm.org/D27283
llvm-svn: 294786
This fold already existed for vectors but only when 'C1' was a splat
constant (but 'C2' could be any constant).
There were no tests for any vector constants, so I'm adding a test
that shows non-splat constants for both operands.
llvm-svn: 294650
This patch is based on the llvm-dev discussion here:
http://lists.llvm.org/pipermail/llvm-dev/2017-January/109631.html
Folding to i1 should always be desirable because that's better for value tracking
and we have special folds for i1 types.
I checked for other users of shouldChangeType() where this might have an effect,
but we already handle the i1 case differently than other types in all of those cases.
Side note: the default datalayout includes i1, so it seems we only find this gap in
shouldChangeType + phi folding for the case when there is (1) an explicit datalayout
without i1, (2) casting to i1 from a legal type, and (3) a phi with exactly 2 incoming
casted operands (as Björn mentioned).
Differential Revision: https://reviews.llvm.org/D29336
llvm-svn: 294066
The code comments didn't match the code logic, and we didn't actually distinguish the fake unary (not/neg/fneg)
operators from arguments. Adding another level to the weighting scheme provides more structure and can help
simplify the pattern matching in InstCombine and other places.
I fixed regressions that would have shown up from this change in:
rL290067
rL290127
But that doesn't mean there are no pattern-matching logic holes left; some combines may just be missing regression tests.
Should fix:
https://llvm.org/bugs/show_bug.cgi?id=28296
Differential Revision: https://reviews.llvm.org/D27933
llvm-svn: 294049
Although this is 'no-functional-change-intended', I'm adding tests
for shl-shl and lshr-lshr pairs because there is no existing test
coverage for those folds.
It seems like we should be able to remove some code from foldShiftedShift()
at this point because we're handling those patterns on the general path.
llvm-svn: 293814
Summary:
If there are two adjacent guards with different conditions, we can
remove one of them and include its condition into the condition of
another one. This patch allows InstCombine to merge them by the
following pattern:
guard(a); guard(b) -> guard(a & b).
Reviewers: reames, apilipenko, igor-laevsky, anna, sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29378
llvm-svn: 293778
transformToIndexedCompare
If they don't have the same type, the size of the constant
index would need to be adjusted (and this wouldn't be always
possible).
Alternatively we could try the analysis with the initial
RHS value, which would guarantee that the two sides have
the same type. However it is unlikely that in practice this
would pass our transformation requirements.
Fixes PR31808 (https://llvm.org/bugs/show_bug.cgi?id=31808).
llvm-svn: 293629
The original shift is bigger, so this may qualify as 'obvious',
but here's an attempt at an Alive-based proof:
Name: exact
Pre: (C1 u< C2)
%a = shl i8 %x, C1
%b = lshr exact i8 %a, C2
=>
%c = lshr exact i8 %x, C2 - C1
%b = and i8 %c, ((1 << width(C1)) - 1) u>> C2
Optimization is correct!
llvm-svn: 293498
This is a minimal patch to avoid the infinite loop in:
https://llvm.org/bugs/show_bug.cgi?id=31751
But the general problem is bigger: we're not canonicalizing all of the min/max forms reported
by value tracking's matchSelectPattern(), and we don't define min/max consistently. Some code
uses matchSelectPattern(), other code uses matchers like m_Umax, and others have their own
inline definitions which may be subtly different from any of the above.
The reason that the test cases in this patch need a cast op to trigger is because we don't
(yet) canonicalize all min/max forms based on matchSelectPattern() in
canonicalizeMinMaxWithConstant(), but we do make min/max+cast transforms based on
matchSelectPattern() in visitSelectInst().
The location of the icmp transforms that trigger the inf-loop seems arbitrary at best, so
I'm moving those behind the min/max fence in visitICmpInst() as the quick fix.
llvm-svn: 293345
Summary:
There are many NVVM intrinsics that we can't entirely get rid of, but
that nonetheless often correspond to target-generic LLVM intrinsics.
For example, if flush denormals to zero (ftz) is enabled, we can convert
@llvm.nvvm.ceil.ftz.f to @llvm.ceil.f32. On the other hand, if ftz is
disabled, we can't do this, because @llvm.ceil.f32 will be lowered to a
non-ftz PTX instruction. In this case, we can, however, simplify the
non-ftz nvvm ceil intrinsic, @llvm.nvvm.ceil.f, to @llvm.ceil.f32.
These transformations are particularly useful because they let us
constant fold instructions that appear in libdevice, the bitcode library
that ships with CUDA and essentially functions as its libm.
Reviewers: tra
Subscribers: hfinkel, majnemer, llvm-commits
Differential Revision: https://reviews.llvm.org/D28794
llvm-svn: 293244
This change reverts:
r293061: "[InstCombine] Canonicalize guards for NOT OR condition"
r293058: "[InstCombine] Canonicalize guards for AND condition"
They miscompile cases like:
```
declare void @llvm.experimental.guard(i1, ...)
define void @test_guard_not_or(i1 %A, i1 %B) {
%C = or i1 %A, %B
%D = xor i1 %C, true
call void(i1, ...) @llvm.experimental.guard(i1 %D, i32 20, i32 30)[ "deopt"() ]
ret void
}
```
because they do transfer the `i32 20, i32 30` parameters to newly
created guard instructions.
llvm-svn: 293227
We already have this fold when the lshr has one use, but it doesn't need that
restriction. We may be able to remove some code from foldShiftedShift().
Also, move the similar:
(X << C) >>u C --> X & (-1 >>u C)
...directly into visitLShr to help clean up foldShiftByConstOfShiftByConst().
That whole function seems questionable since it is called by commonShiftTransforms(),
but there's really not much in common if we're checking the shift opcodes for every
fold.
llvm-svn: 293215
This intrinsic uses bit 0 and bit 4 of an immediate argument to determine which bits of its inputs to read. This patch uses this information to simplify the demanded elements of the input vectors.
Differential Revision: https://reviews.llvm.org/D28979
llvm-svn: 293151
This is a partial fix for Bug 31520 - [guards] canonicalize guards in instcombine
Reviewed By: apilipenko
Differential Revision: https://reviews.llvm.org/D29075
Patch by Maxim Kazantsev.
llvm-svn: 293061
This is a partial fix for Bug 31520 - [guards] canonicalize guards in instcombine
Reviewed By: apilipenko
Differential Revision: https://reviews.llvm.org/D29074
Patch by Maxim Kazantsev.
llvm-svn: 293058
This is a partial fix for Bug 31520 - [guards] canonicalize guards in instcombine
Reviewed By: majnemer, apilipenko
Differential Revision: https://reviews.llvm.org/D29071
Patch by Maxim Kazantsev.
llvm-svn: 293056
Summary: As per title. This will add the instructiions we are interested in in the worklist.
Reviewers: mehdi_amini, majnemer, andreadb
Differential Revision: https://reviews.llvm.org/D29081
llvm-svn: 292957
Added early out for single undef input - we were already supporting (and testing) this in the constant folding code, we just do it quicker now
Drop undef handling from demanded elts code now that we handle it fully in InstCombiner::visitCallInst
llvm-svn: 292913
Sanjay Patel