cases where the alloca type, the load types, and the store types used
all disagree.
Previously, the only way that vector-based promotion occured was if the
alloca type was a vector type. This was one of the *very* few remaining
uses of the alloca's type to guide SROA/mem2reg left in LLVM. It turns
out it was a bad idea.
The alloca type can change very easily based on the mixture of types
loaded and stored to that alloca. We shouldn't be relying on it as
a signal for very much. Instead, the source of truth should be loads and
stores. We should canonicalize the loads and stores as much as possible
and then rely on them exclusively in SROA.
When looking and loads and stores, we may find many different candidate
vector types. This change will let SROA try all of them to find a vector
type which is a viable way to promote the entire alloca to a vector
register.
With this change, it becomes possible to do better canonicalization and
optimization of loads and stores without breaking SROA in random ways,
and that should allow fixing a core source of performance loss in hot
numerical loops such as those in Eigen.
llvm-svn: 220116
'AS'.
Using 'S' as this was a terrible idea. Arguably, 'AS' is not much
better, but it at least follows the idea of using initialisms and
removes active confusion about the AllocaSlices variable and a Slice
variable.
llvm-svn: 219963
clang-modernize.
I did have to clean up the variable types and whitespace a bit because
the use of auto made the code much less readable here.
llvm-svn: 219962
iterators.
There are a ton of places where it essentially wants ranges
rather than just iterators. This is just the first step that adds the
core slice range typedefs and uses them in a couple of places. I still
have to explicitly construct them because they've not been punched
throughout the entire set of code. More range-based cleanups incoming.
llvm-svn: 219955
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
Note: I accidentally committed a bogus older version of this patch previously.
llvm-svn: 218787
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
llvm-svn: 218778
This change, which allows @llvm.assume to be used from within computeKnownBits
(and other associated functions in ValueTracking), adds some (optional)
parameters to computeKnownBits and friends. These functions now (optionally)
take a "context" instruction pointer, an AssumptionTracker pointer, and also a
DomTree pointer, and most of the changes are just to pass this new information
when it is easily available from InstSimplify, InstCombine, etc.
As explained below, the significant conceptual change is that known properties
of a value might depend on the control-flow location of the use (because we
care that the @llvm.assume dominates the use because assumptions have
control-flow dependencies). This means that, when we ask if bits are known in a
value, we might get different answers for different uses.
The significant changes are all in ValueTracking. Two main changes: First, as
with the rest of the code, new parameters need to be passed around. To make
this easier, I grouped them into a structure, and I made internal static
versions of the relevant functions that take this structure as a parameter. The
new code does as you might expect, it looks for @llvm.assume calls that make
use of the value we're trying to learn something about (often indirectly),
attempts to pattern match that expression, and uses the result if successful.
By making use of the AssumptionTracker, the process of finding @llvm.assume
calls is not expensive.
Part of the structure being passed around inside ValueTracking is a set of
already-considered @llvm.assume calls. This is to prevent a query using, for
example, the assume(a == b), to recurse on itself. The context and DT params
are used to find applicable assumptions. An assumption needs to dominate the
context instruction, or come after it deterministically. In this latter case we
only handle the specific case where both the assumption and the context
instruction are in the same block, and we need to exclude assumptions from
being used to simplify their own ephemeral values (those which contribute only
to the assumption) because otherwise the assumption would prove its feeding
comparison trivial and would be removed.
This commit adds the plumbing and the logic for a simple masked-bit propagation
(just enough to write a regression test). Future commits add more patterns
(and, correspondingly, more regression tests).
llvm-svn: 217342
SROA may decide that it needs to insert a bitcast and would set it's
insertion point before a PHI. This will create an invalid module
right quick.
Instead, choose the first insertion point in the basic block that holds
our PHI.
This fixes PR20822.
Differential Revision: http://reviews.llvm.org/D5141
llvm-svn: 216891
Summary:
Fixes PR20425.
During slice building, if all of the incoming values of a PHI node are the same, replace the PHI node with the common value. This simplification makes alloca's used by PHI nodes easier to promote.
Test Plan: Added three more tests in phi-and-select.ll
Reviewers: nlewycky, eliben, meheff, chandlerc
Reviewed By: chandlerc
Subscribers: zinovy.nis, hfinkel, baldrick, llvm-commits
Differential Revision: http://reviews.llvm.org/D4659
llvm-svn: 216299
In this case, we are creating an x86_fp80 slice for a union from C where
the padding bytes may contain real data. An x86_fp80 alloca is 16 bytes,
and that's just fine. We can't, however, use regular loads and stores to
access the slice, because the store size is only 10 bytes / 80 bits.
Instead, use memcpy and memset.
Fixes PR18726.
Reviewed By: chandlerc
Differential Revision: http://reviews.llvm.org/D5012
llvm-svn: 216248
this case, the code path dealing with vector promotion was missing the explicit
checks for lifetime intrinsics that were present on the corresponding integer
promotion path.
llvm-svn: 215148
In order to enable the preservation of noalias function parameter information
after inlining, and the representation of block-level __restrict__ pointer
information (etc.), additional kinds of aliasing metadata will be introduced.
This metadata needs to be carried around in AliasAnalysis::Location objects
(and MMOs at the SDAG level), and so we need to generalize the current scheme
(which is hard-coded to just one TBAA MDNode*).
This commit introduces only the necessary refactoring to allow for the
introduction of other aliasing metadata types, but does not actually introduce
any (that will come in a follow-up commit). What it does introduce is a new
AAMDNodes structure to hold all of the aliasing metadata nodes associated with
a particular memory-accessing instruction, and uses that structure instead of
the raw MDNode* in AliasAnalysis::Location, etc.
No functionality change intended.
llvm-svn: 213859
isDereferenceablePointer should not give up upon encountering any bitcast. If
we're casting from a pointer to a larger type to a pointer to a small type, we
can continue by examining the bitcast's operand. This missing capability
was noted in a comment in the function.
In order for this to work, isDereferenceablePointer now takes an optional
DataLayout pointer (essentially all callers already had such a pointer
available). Most code uses isDereferenceablePointer though
isSafeToSpeculativelyExecute (which already took an optional DataLayout
pointer), and to enable the LICM test case, LICM needs to actually provide its DL
pointer to isSafeToSpeculativelyExecute (which it was not doing previously).
llvm-svn: 212686
r199771 accidently broke the logic that makes sure that SROA only splits
load on byte boundaries. If such a split happens, some bits get lost
when reassembling loads of wider types, causing data corruption.
Move the width check up to reject such splits early, avoiding the
corruption. Fixes PR19250.
Patch by: Björn Steinbrink <bsteinbr@gmail.com>
llvm-svn: 211082
definition below all of the header #include lines, lib/Transforms/...
edition.
This one is tricky for two reasons. We again have a couple of passes
that define something else before the includes as well. I've sunk their
name macros with the DEBUG_TYPE.
Also, InstCombine contains headers that need DEBUG_TYPE, so now those
headers #define and #undef DEBUG_TYPE around their code, leaving them
well formed modular headers. Fixing these headers was a large motivation
for all of these changes, as "leaky" macros of this form are hard on the
modules implementation.
llvm-svn: 206844
This requires a number of steps.
1) Move value_use_iterator into the Value class as an implementation
detail
2) Change it to actually be a *Use* iterator rather than a *User*
iterator.
3) Add an adaptor which is a User iterator that always looks through the
Use to the User.
4) Wrap these in Value::use_iterator and Value::user_iterator typedefs.
5) Add the range adaptors as Value::uses() and Value::users().
6) Update *all* of the callers to correctly distinguish between whether
they wanted a use_iterator (and to explicitly dig out the User when
needed), or a user_iterator which makes the Use itself totally
opaque.
Because #6 requires churning essentially everything that walked the
Use-Def chains, I went ahead and added all of the range adaptors and
switched them to range-based loops where appropriate. Also because the
renaming requires at least churning every line of code, it didn't make
any sense to split these up into multiple commits -- all of which would
touch all of the same lies of code.
The result is still not quite optimal. The Value::use_iterator is a nice
regular iterator, but Value::user_iterator is an iterator over User*s
rather than over the User objects themselves. As a consequence, it fits
a bit awkwardly into the range-based world and it has the weird
extra-dereferencing 'operator->' that so many of our iterators have.
I think this could be fixed by providing something which transforms
a range of T&s into a range of T*s, but that *can* be separated into
another patch, and it isn't yet 100% clear whether this is the right
move.
However, this change gets us most of the benefit and cleans up
a substantial amount of code around Use and User. =]
llvm-svn: 203364
remove_if that its predicate is adaptable. We don't actually need this,
we can write a generic adapter for any predicate.
This lets us remove some very wrong std::function usages. We should
never be using std::function for predicates to algorithms. This incurs
an *indirect* call overhead for every evaluation of the predicate, and
makes it very hard to inline through.
llvm-svn: 202742
operand_values. The first provides a range view over operand Use
objects, and the second provides a range view over the Value*s being
used by those operands.
The naming is "STL-style" rather than "LLVM-style" because we have
historically named iterator methods STL-style, and range methods seem to
have far more in common with their iterator counterparts than with
"normal" APIs. Feel free to bikeshed on this one if you want, I'm happy
to change these around if people feel strongly.
I've switched code in SROA and LCG to exercise these mostly to ensure
they work correctly -- we don't really have an easy way to unittest this
and they're trivial.
llvm-svn: 202687
the default.
Based on the patch by Matt Arsenault, D1764!
I switched one place to use the more direct pointer type to compute the
desired address space, and I reworked the memcpy rewriting section to
reflect significant refactorings that this patch helped inspire.
Thanks to several of the folks who helped review and improve the patch
as well.
llvm-svn: 202247
to work independently for the slice side and the other side.
This allows us to only compute the minimum of the two when we actually
rewrite to a memcpy that needs to take the minimum, and preserve higher
alignment for one side or the other when rewriting to loads and stores.
This fix was inspired by seeing the result of some refactoring that
makes addrspace handling better.
llvm-svn: 202242
D1764, which in turn set off the other refactorings to make
'getSliceAlign()' a sensible thing.
There are two possible inputs to the required alignment of a memory
transfer intrinsic: the alignment constraints of the source and the
destination. If we are *only* introducing a (potentially new) offset
onto one side of the transfer, we don't need to consider the alignment
constraints of the other side. Use this to simplify the logic feeding
into alignment computation for unsplit transfers.
Also, hoist the clamp of the magical zero alignment for these intrinsics
to the more customary one alignment early. This lets several other
conditions melt away.
No functionality changed. There is a further improvement this exposes
which *will* change functionality, but that's arriving in a separate
patch.
llvm-svn: 202232
rewriting logic: don't pass custom offsets for the adjusted pointer to
the new alloca.
We always passed NewBeginOffset here. Sometimes we spelled it
BeginOffset, but only when they were in fact equal. Whats worse, the API
is set up so that you can't reasonably call it with anything else -- it
assumes that you're passing it an offset relative to the *original*
alloca that happens to fall within the new one. That's the whole point
of NewBeginOffset, it's the clamped beginning offset.
No functionality changed.
llvm-svn: 202231
alignment of the slice being rewritten, not any arbitrary offset.
Every caller is really just trying to compute the alignment for the
whole slice, never for some arbitrary alignment. They are also just
passing a type when they have one to see if we can skip an explicit
alignment in the IR by using the type's alignment. This makes for a much
simpler interface.
Another refactoring inspired by the addrspace patch for SROA, although
only loosely related.
llvm-svn: 202230
consistency with memcpy rewriting, and fix a latent bug in the alignment
management for memset.
The alignment issue is that getAdjustedAllocaPtr is computing the
*relative* offset into the new alloca, but the alignment isn't being set
to the relative offset, it was using the the absolute offset which is
into the old alloca.
I don't think its possible to write a test case that actually reaches
this code where the resulting alignment would be observably different,
but the intent was clearly to use the relative offset within the new
alloca.
llvm-svn: 202229
rather than passing them as arguments.
While I generally prefer actual arguments, in this case the readability
loss is substantial. By using members we avoid repeatedly calculating
the offsets, and once we're using members it is useful to ensure that
those names *always* refer to the original-alloca-relative new offset
for a rewritten slice.
No functionality changed. Follow-up refactoring, all toward getting the
address space patch merged.
llvm-svn: 202228
slice being rewritten.
We had the same code scattered across most of the visits. Instead,
compute the new offsets and the slice size once when we start to visit
a particular slice, and use the member variables from then on. This
reduces quite a bit of code duplication.
No functionality changed. Refactoring inspired to make it easier to
apply the address space patch to SROA.
llvm-svn: 202227
checking in SROA.
The primary change is to just rely on uge for checking that the offset
is within the allocation size. This removes the explicit checks against
isNegative which were terribly error prone (including the reversed logic
that led to PR18615) and prevented us from supporting stack allocations
larger than half the address space.... Ok, so maybe the latter isn't
*common* but it's a silly restriction to have.
Also, we used to try to support a PHI node which loaded from before the
start of the allocation if any of the loaded bytes were within the
allocation. This doesn't make any sense, we have never really supported
loading or storing *before* the allocation starts. The simplified logic
just doesn't care.
We continue to allow loading past the end of the allocation in part to
support cases where there is a PHI and some loads are larger than others
and the larger ones reach past the end of the allocation. We could solve
this a different and more conservative way, but I'm still somewhat
paranoid about this.
llvm-svn: 202224
implemented this way a long time ago and due to the overwhelming bugs
that surfaced, moved to a much more relaxed variant. Richard Smith would
like to understand the magnitude of this problem and it seems fairly
harmless to keep some flag-controlled logic to get the extremely strict
behavior here. I'll remove it if it doesn't prove useful.
llvm-svn: 202193
just "load". This helps avoid pointless de-duping with order-sensitive
numbers as we already have unique names from the original load. It also
makes the resulting IR quite a bit easier to read.
llvm-svn: 202140
the pointer adjustment code. This is the primary code path that creates
totally new instructions in SROA and being able to lump them based on
the pointer value's name for which they were created causes
*significantly* fewer name collisions and general noise in the debug
output. This is particularly significant because it is making it much
harder to track down instability in the output of SROA, as name
de-duplication is a totally harmless form of instability that gets in
the way of seeing real problems.
The new fancy naming scheme tries to dig out the root "pre-SROA" name
for pointer values and associate that all the way through the pointer
formation instructions. Digging out the root is important to prevent the
multiple iterative rounds of SROA from just layering too much cruft on
top of cruft here. We already track the layers of SROAs iteration in the
alloca name prefix. We don't need to duplicate it here.
Should have no functionality change, and shouldn't have any really
measurable impact on NDEBUG builds, as most of the complex logic is
debug-only.
llvm-svn: 202139
using OldPtr more heavily. Lots of this code was written before the
rewriter had an OldPtr member setup ahead of time. There are already
asserts in place that should ensure this doesn't change any
functionality.
llvm-svn: 202135
the break statement, not just think it to yourself....
No idea how this worked at all, much less survived most bots, my
bootstrap, and some bot bootstraps!
The Polly one didn't survive, and this was filed as PR18959. I don't
have a reduced test case and honestly I'm not seeing the need. What we
probably need here are better asserts / debug-build behavior in
SmallPtrSet so that this madness doesn't make it so far.
llvm-svn: 202129
Chandler Carruth