It's causing some buildbots to timeout whenever tablegen needs re-compilation,
particularly those with -fsanitize=memory but not only them. A compile time
regression was expected since it triples the amount of SelectionDAG rules we
are able to import but it's currently too high.
llvm-svn: 303542
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
The previous commit failed on test-suite/Bitcode/simd_ops/AArch64_halide_runtime.bc
because isImmOperandEqual() assumed MO was a register operand and that's not
always true.
llvm-svn: 303341
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
llvm-svn: 303259
Summary:
Without this, it's possible to encounter multiple defs for a register.
This is triggered by the current version of D32868 when applied to trunk.
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls
Reviewed By: qcolombet
Subscribers: llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32869
llvm-svn: 303253
When looping through a destination pattern's operands to decide how many
default operands we need to introduce, we used to count the "expanded"
number of operands. So if one default operand would be rendered as 2
values, we'd count it as 2 operands, when in fact it needs to count as
only 1 operand regardless of how many values it expands to.
This turns out to be a problem only in some very specific cases, e.g.
when we have one operand with multiple default values followed by more
operands with default values (see the new test). In such a situation
we'd stop looping before looking at all the operands, and then error out
assuming that we don't have enough default operands to make up the
shortfall.
At the moment this only affects ARM.
The patch removes the loop counting default operands entirely and
assumes that we'll have to introduce values for any default operand that
we find (i.e. we're assuming it cannot be given as a child at all). It
also extracts the code for adding renderers for default operands into a
helper method.
Differential Revision: https://reviews.llvm.org/D33031
llvm-svn: 303240
Emit and use the TableGen instruction selector for ARM. At the moment,
this allows us to remove the hand-written code for selecting G_SDIV and
G_UDIV.
Future commits will focus on increasing the code coverage for it and
removing more dead code from the current instruction selector.
llvm-svn: 301905
Summary:
Predicate<> now has a field to indicate how often it must be recomputed.
Currently, there are two frequencies, per-module (RecomputePerFunction==0)
and per-function (RecomputePerFunction==1). Per-function predicates are
currently recomputed more frequently than necessary since the only predicate
in this category is cheap to test. Per-module predicates are now computed in
getSubtargetImpl() while per-function predicates are computed in selectImpl().
Tablegen now manages the PredicateBitset internally. It should only be
necessary to add the required includes.
Also fixed a problem revealed by the test case where
constrainSelectedInstRegOperands() would attempt to tie operands that
BuildMI had already tied.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32491
llvm-svn: 301750
Summary:
It functions just like RegisterClass except that the class is obtained
from a field.
Depends on D31761.
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32229
llvm-svn: 301080
Summary:
Some targets need to be able to do more complex rendering than just adding an
operand or two to an instruction. For example, it may need to insert an
instruction to extract a subreg first, or it may need to perform an operation
on the operand.
In SelectionDAG, targets would create SDNode's to achieve the desired effect
during the complex pattern predicate. This worked because SelectionDAG had a
form of garbage collection that would take care of SDNode's that were created
but not used due to a later predicate rejecting a match. This doesn't translate
well to GlobalISel and the churn was wasteful.
The API changes in this patch enable GlobalISel to accomplish the same thing
without the waste. The API is now:
InstructionSelector::OptionalComplexRendererFn selectArithImmed(MachineOperand &Root) const;
where Root is the root of the match. The return value can be omitted to
indicate that the predicate failed to match, or a function with the signature
ComplexRendererFn can be returned. For example:
return OptionalComplexRendererFn(
[=](MachineInstrBuilder &MIB) { MIB.addImm(Immed).addImm(ShVal); });
adds two immediate operands to the rendered instruction. Immed and ShVal are
captured from the predicate function.
As an added bonus, this also reduces the amount of information we need to
provide to GIComplexOperandMatcher.
Depends on D31418
Reviewers: aditya_nandakumar, t.p.northover, qcolombet, rovka, ab, javed.absar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31761
llvm-svn: 301079
canMutate() was returning true when the operands were all in the same order as
the matched instruction. However, it wasn't checking the operands were actually
on that instruction. This worked when we could only match a single instruction
but the addition of nested instruction matching led to cases where the operands
could be split across multiple instructions. canMutate() now returns false if
operands belong to instructions other than the root of the match.
llvm-svn: 301077
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300993
It's causing llvm-clang-x86_64-expensive-checks-win to fail to compile and I
haven't worked out why. Reverting to make it green while I figure it out.
llvm-svn: 300978
This should fix llvm-clang-x86_64-expensive-checks-win
I reproduced the error using the following code:
namespace llvm {
// Moving this out of the llvm namespace fixes the error.
template<unsigned NumBits> class PredicateBitsetImpl {};
}
namespace {
const unsigned MAX_SUBTARGET_PREDICATES = 11;
// This works on Clang but is broken on MSVC
// using PredicateBitset = PredicateBitsetImpl<MAX_SUBTARGET_PREDICATES>;
// Some versions emit a syntax error here ("error C2061: syntax error: identifier
// 'PredicateBitsetImpl'") but others accept it and only emit the C3646 below.
//
// This works on Clang and MSVC
using PredicateBitset = llvm::PredicateBitsetImpl<MAX_SUBTARGET_PREDICATES>;
class Foo {
private:
PredicateBitset A; // error C3646: 'A': unknown override specifier
};
}
llvm-svn: 300970
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300964
Summary:
As far as instruction selection is concerned, all three appear to be same thing.
Support for these operands is experimental since AArch64 doesn't make use
of them and the in-tree targets that do use them (AMDGPU for
OperandWithDefaultOps, AMDGPU/ARM/Hexagon/Lanai for PredicateOperand, and ARM
for OperandWithDefaultOps) are not using tablegen-erated GlobalISel yet.
Reviewers: rovka, aditya_nandakumar, t.p.northover, qcolombet, ab
Reviewed By: rovka
Subscribers: inglorion, aemerson, rengolin, mehdi_amini, dberris, kristof.beyls, igorb, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D31135
llvm-svn: 300037
Summary:
Temporaries are now allocated to operands instead of predicates and this
allocation is used to correctly pair up the rendered operands with the
matched operands.
Previously, ComplexPatterns were allocated temporaries independently in the
Src Pattern and Dst Pattern, leading to mismatches. Additionally, the Dst
Pattern failed to account for the allocated index and therefore always used
temporary 0, 1, ... when it should have used base+0, base+1, ...
Thanks to Aditya Nandakumar for noticing the bug.
Depends on D30539
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: igorb, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D31054
llvm-svn: 299538
Fix other cases of 'const StringRef' creeping back in at the same time.
This should fix the llvm-clang-x86_64-expensive-checks-win buildbot.
llvm-svn: 299433
Summary:
Lift the restrictions that prevented the tree walking introduced in the
previous change and add support for patterns like:
(G_ADD (G_MUL (G_SEXT $src1), (G_SEXT $src2)), $src3) -> SMADDWrrr $dst, $src1, $src2, $src3
Also adds support for G_SEXT and G_ZEXT to support these cases.
One particular aspect of this that I should draw attention to is that I've
tried to be overly conservative in determining the safety of matches that
involve non-adjacent instructions and multiple basic blocks. This is intended
to be used as a cheap initial check and we may add a more expensive check in
the future. The current rules are:
* Reject if any instruction may load/store (we'd need to check for intervening
memory operations.
* Reject if any instruction has implicit operands.
* Reject if any instruction has unmodelled side-effects.
See isObviouslySafeToFold().
Reviewers: t.p.northover, javed.absar, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30539
llvm-svn: 299430
Functions that still return Expected<X> are now called createAndImport*()
Changing the return type was requested in the review comments for r299001
llvm-svn: 299063
Summary:
But don't actually inspect the tree any deeper than we already do. This
change is NFC but the next one will enable full traversal of the
source/destination patterns.
Depends on D30535
Reviewers: t.p.northover, qcolombet, aditya_nandakumar, rovka, ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30536
llvm-svn: 299001
Summary:
The categories are emitted in a strange order in this patch due to a bug in the
CommandLine library.
Reviewers: ab
Reviewed By: ab
Subscribers: ab, llvm-commits
Differential Revision: https://reviews.llvm.org/D30995
llvm-svn: 298843
These are needed due to some obscure rules in the standard
about how std::vector selects between copy and move
constructors, which can cause a conforming implementation
to attempt to select the copy constructor of RuleMatcher,
which will fail since std::unique_ptr<> isn't copyable.
llvm-svn: 298294
Summary:
Prepare the way for nested instruction matching support by having actions
like CopyRenderer look up operands in the RuleMatcher rather than a
specific InstructionMatcher. This allows actions to reference any operand
from any matched instruction.
It works by checking the 'shape' of the match and capturing
each matched instruction to a local variable. If the shape is wrong
(not enough operands, leaf nodes where non-leafs are expected, etc.), then
the rule exits early without checking the predicates. Once we've captured
the instructions, we then test the predicates as before (except using the
local variables). If the match is successful, then we render the new
instruction as before using the local variables.
It's not noticable in this patch but by the time we support multiple
instruction matching, this patch will also cause a significant improvement
to readability of the emitted code since
MRI.getVRegDef(I->getOperand(0).getReg()) will simply be MI1 after
emitCxxCaptureStmts().
This isn't quite NFC because I've also fixed a bug that I'm surprised we
haven't encountered yet. It now checks there are at least the expected
number of operands before accessing them with getOperand().
Depends on D30531
Reviewers: t.p.northover, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: rovka
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30535
llvm-svn: 298257
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
llvm-svn: 297782
There were some issues in the implementation of enumerate()
preventing it from being used in various contexts. These were
all related to the fact that it did not supporter llvm's
iterator_facade_base class. So this patch adds support for that
and additionally exposes a new helper method to_vector() that
will evaluate an entire range and store the results in a
vector.
Differential Revision: https://reviews.llvm.org/D30853
llvm-svn: 297633
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
Extra const in the StringRef argument meant that MSVC complained about it not correctly overriding from OperandPredicateMatcher::emitCxxPredicateExpr (which didn't have the const)
llvm-svn: 296138
Summary:
This isn't testable for AArch64 by itself so this patch also adds
support for constant immediates in the pattern and physical
register uses in the result.
The new IntOperandMatcher matches the constant in patterns such as
'(set $rd:GPR32, (G_XOR $rs:GPR32, -1))'. It's always safe to fold
immediates into an instruction so this is the first rule that will match
across multiple BB's.
The Renderer hierarchy is responsible for adding operands to the result
instruction. Renderers can copy operands (CopyRenderer) or add physical
registers (in particular %wzr and %xzr) to the result instruction
in any order (OperandMatchers now import the operand names from
SelectionDAG to allow renderers to access any operand). This allows us to
emit the result instruction for:
%1 = G_XOR %0, -1 --> %1 = ORNWrr %wzr, %0
%1 = G_XOR -1, %0 --> %1 = ORNWrr %wzr, %0
although the latter is untested since the matcher/importer has not been
taught about commutativity yet.
Added BuildMIAction which can build new instructions and mutate them where
possible. W.r.t the mutation aspect, MatchActions are now told the name of
an instruction they can recycle and BuildMIAction will emit mutation code
when the renderers are appropriate. They are appropriate when all operands
are rendered using CopyRenderer and the indices are the same as the matcher.
This currently assumes that all operands have at least one matcher.
Finally, this change also fixes a crash in
AArch64InstructionSelector::select() caused by an immediate operand
passing isImm() rather than isCImm(). This was uncovered by the other
changes and was detected by existing tests.
Depends on D29711
Reviewers: t.p.northover, ab, qcolombet, rovka, aditya_nandakumar, javed.absar
Reviewed By: rovka
Subscribers: aemerson, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D29712
llvm-svn: 296131
The 'Kind' member used in RTTI for InstructionPredicateMatcher was not
initialized but went undetected since I always ended up with the correct value.
llvm-svn: 296126
Summary:
This makes more important rules have priority over less important rules.
For example, '%a = G_ADD $b:s64, $c:s64' has priority over
'%a = G_ADD $b:s32, $c:s32'. Previously these rules were emitted in the
correct order by chance.
NFC in this patch but it is required to make the next patch work correctly.
Depends on D29710
Reviewers: t.p.northover, ab, qcolombet, aditya_nandakumar, rovka
Reviewed By: ab, rovka
Subscribers: javed.absar, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D29711
llvm-svn: 296121
Summary:
Each OperandPredicateMatcher shouldn't need to know how to generate the expression
to reference a MachineOperand. The OperandMatcher should provide it.
In addition to separating responsibilities, this also lays some groundwork for
decoupling source patterns from destination patterns to allow invented operands
or operands provided by GlobalISel's equivalent to the ComplexPattern<> class.
Depends on D29709
Reviewers: t.p.northover, ab, rovka, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D29710
llvm-svn: 295668
Summary:
In the near future the rules will be sorted between these two steps to
ensure that more important rules are not prevented by less important ones.
Reviewers: t.p.northover, ab, rovka, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D29709
llvm-svn: 295661
Instead of emitting the matcher code directly, return the rule matcher
and the skip reason as an Expected<RuleMatcher>.
This will let us record all matchers and process them before emission.
It's a somewhat unconventional use of Error, but it's nicer than, say,
std::pair, because of the bool conversions.
Differential Revision: https://reviews.llvm.org/D29743
llvm-svn: 294706
This lets us split out PatternToMatch from the top-level RuleMatcher,
where it doesn't really belong. That, in turn, lets us eventually
generate RuleMatchers from non-SelectionDAG sources.
llvm-svn: 294076
Daniel Sanders