Enable the optimization of operations on DPR and SPR via a feature instead
of checking the target.
Differential revision: https://reviews.llvm.org/D49463
llvm-svn: 337575
This is a new modernized VS integration installer. It adds a
Visual Studio .sln file which, when built, outputs a VSIX that can
be used to install ourselves as a "real" Visual Studio Extension.
We can even upload this extension to the visual studio marketplace.
This fixes a longstanding problem where we didn't support installing
into VS 2017 and higher. In addition to supporting VS 2017, due
to the way this is written we now longer need to do anything special
to support future versions of VS as well. Everything should
"just work". This also fixes several bugs with our old integration,
such as MSBuild triggering full rebuilds when /Zi was used.
Finally, we add a new UI page called "LLVM" which becomes visible
when the LLVM toolchain is selected. For now this only contains
one option which is the path to clang-cl.exe, but in the future
we can add more things here.
Differential Revision: https://reviews.llvm.org/D42762
llvm-svn: 337572
When pointer checking is enabled, it's important that every pointer is
checked before its value is used.
For stores MSan used to generate code that calculates shadow/origin
addresses from a pointer before checking it.
For userspace this isn't a problem, because the shadow calculation code
is quite simple and compiler is able to move it after the check on -O2.
But for KMSAN getShadowOriginPtr() creates a runtime call, so we want the
check to be performed strictly before that call.
Swapping materializeChecks() and materializeStores() resolves the issue:
both functions insert code before the given IR location, so the new
insertion order guarantees that the code calculating shadow address is
between the address check and the memory access.
llvm-svn: 337571
Summary: In Python 3, sys.stdout.write expects a string rather than bytes. In order to be able to write the bytes to stdout, we need to use the buffer directly instead. This change is borrowing the implementation for writing to stdout that cat.py uses. Note that we cannot use cat.py directly because the file we are trying to open is a gzip file.
Reviewers: asmith, bkramer, alexshap, jakehehrlich
Reviewed By: alexshap, jakehehrlich
Subscribers: jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D49515
llvm-svn: 337567
Summary:
Each of the four methods had a dozen lines and was doing almost exactly
the same thing: get the appropriate accelerator table kind and insert an
entry into it. I move this common logic to a helper function and make
these methods delegate to it.
This came up in the context of D49493, where I've needed to make adding
a string to a string pool slightly more complicated, and it seemed to
make sense to do it in one place instead of five.
To make this work I've needed to unify the interface of the AccelTable
data types, as some used to store DIE& and others DIE*. I chose to unify
to a reference as that's what the caller uses.
This technically isn't NFC, because it changes the StringPool used for
apple tables in the DWO case (now it uses the main file like DWARF v5
instead of the DWO file). However, that shouldn't matter, as DWO is not
a thing on apple targets (clang frontend simply ignores -gsplit-dwarf).
Reviewers: JDevlieghere, aprantl, probinson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49542
llvm-svn: 337562
When merging through a TokenFactor we need to check that the
load may be ordered such that no other aliasing memory operations may
happen. It is not sufficient to just check that the load is a member
of the chain token factor as it there may be a indirect chain. Require
the load's chain has only one use.
This fixes PR37826.
Reviewers: spatel, davide, efriedma, craig.topper, RKSimon
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D49388
llvm-svn: 337560
Summary:
There is currently too much redundancy in the class/variable/* names in Scudo:
- we are in the namespace `__scudo`, so there is no point in having something
named `ScudoX` to end up with a final name of `__scudo::ScudoX`;
- there are a lot of types/* that have `Allocator` in the name, given that
Scudo is an allocator I figure this doubles up as well.
So change a bunch of the Scudo names to make them shorter, less redundant, and
overall simpler. They should still be pretty self explaining (or at least it
looks so to me).
The TSD part will be done in another CL (eg `__scudo::ScudoTSD`).
Reviewers: alekseyshl, eugenis
Reviewed By: alekseyshl
Subscribers: delcypher, #sanitizers, llvm-commits
Differential Revision: https://reviews.llvm.org/D49505
llvm-svn: 337557
As documented here: https://software.intel.com/en-us/node/682969 and
https://software.intel.com/en-us/node/523346. cpu_dispatch multiversioning
is an ICC feature that provides for function multiversioning.
This feature is implemented with two attributes: First, cpu_specific,
which specifies the individual function versions. Second, cpu_dispatch,
which specifies the location of the resolver function and the list of
resolvable functions.
This is valuable since it provides a mechanism where the resolver's TU
can be specified in one location, and the individual implementions
each in their own translation units.
The goal of this patch is to be source-compatible with ICC, so this
implementation diverges from the ICC implementation in a few ways:
1- Linux x86/64 only: This implementation uses ifuncs in order to
properly dispatch functions. This is is a valuable performance benefit
over the ICC implementation. A future patch will be provided to enable
this feature on Windows, but it will obviously more closely fit ICC's
implementation.
2- CPU Identification functions: ICC uses a set of custom functions to identify
the feature list of the host processor. This patch uses the cpu_supports
functionality in order to better align with 'target' multiversioning.
1- cpu_dispatch function def/decl: ICC's cpu_dispatch requires that the function
marked cpu_dispatch be an empty definition. This patch supports that as well,
however declarations are also permitted, since the linker will solve the
issue of multiple emissions.
Differential Revision: https://reviews.llvm.org/D47474
llvm-svn: 337552
r337531 changed return type of MmapFixedNoReserve, but esan wasn't updated.
As the result esan shadow setup always fails.
We probably need to make MmapFixedNoAccess signature consistent
with MmapFixedNoReserve. But this is just to unbreak tests.
llvm-svn: 337550
This version contains a fix to add values for which the state in ParamState change
to the worklist if the state in ValueState did not change. To avoid adding the
same value multiple times, mergeInValue returns true, if it added the value to
the worklist. The value is added to the worklist depending on its state in
ValueState.
Original message:
For comparisons with parameters, we can use the ParamState lattice
elements which also provide constant range information. This improves
the code for PR33253 further and gets us closer to use
ValueLatticeElement for all values.
Also, as we are using the range information in the solver directly, we
do not need tryToReplaceWithConstantRange afterwards anymore.
Reviewers: dberlin, mssimpso, davide, efriedma
Reviewed By: mssimpso
Differential Revision: https://reviews.llvm.org/D43762
llvm-svn: 337548
This is an early step towards using SimplifyDemandedVectorElts for target shuffle combining - this merely moves the existing X86ISD::VBROADCAST simplification code to use the SimplifyDemandedVectorElts mechanism.
Adds X86TargetLowering::SimplifyDemandedVectorEltsForTargetNode to handle X86ISD::VBROADCAST - in time we can support all target shuffles (and other ops) here.
llvm-svn: 337547
Summary:
This patch makes us generate the debug_names section in response to some
user-facing commands (previously it was only generated if explicitly
selected via the -accel-tables option).
My goal was to make this work for DWARF>=5 (as it's an official part of
that standard), and also, as an extension, for DWARF<5 if one is
explicitly tuning for lldb as a debugger (because it brings a large
performance improvement there).
This is slightly complicated by the fact that the debug_names tables are
incompatible with the DWARF v4 type units (they assume that the type
units are in the debug_info section), and unfortunately, right now we
generate DWARF v4-style type units even for -gdwarf-5. For this reason,
I disable all accelerator tables if the user requested type unit
generation. I do this even for apple tables, as they have the same
problem (in fact generating type units for apple targets makes us crash
even before we get around to emitting the accelerator tables).
Reviewers: JDevlieghere, aprantl, dblaikie, echristo, probinson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49420
llvm-svn: 337544
Currently clang does not allow implicit cast of a pointer to a pointer type
in different address space but allows C-style cast of a pointer to a pointer
type in different address space. However, there is a bug in Sema causing
incorrect Cast Expr in AST for the latter case, which in turn results in
invalid LLVM IR in codegen.
This is because Sema::IsQualificationConversion returns true for a cast of
pointer to a pointer type in different address space, which in turn allows
a standard conversion and results in a cast expression with no op in AST.
This patch fixes that by let Sema::IsQualificationConversion returns false
for a cast of pointer to a pointer type in different address space, which
in turn disallows standard conversion, implicit cast, and static cast.
Finally it results in an reinterpret cast and correct conversion kind is set.
Differential Revision: https://reviews.llvm.org/D49294
llvm-svn: 337540
It looks like currently the UBSan blacklist is only applied when "Undefined" is selected.
This patch updates the cmake file to apply it whenever Undefined is selected
(e.g. 'Address; Undefined' ). This allows us to use the workaround added in
rL335525 when using AddressSan and UBSan together.
Reviewers: eugenis, vitalybuka
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D49558
llvm-svn: 337539
As a consequence of recent discussions
(http://lists.llvm.org/pipermail/llvm-dev/2018-May/123164.html), this patch
changes the SystemZ SchedModels so that the IssueWidth is 6, which is the
decoder capacity, and NumMicroOps become the number of decoder slots needed
per instruction.
In addition, the SchedWrite latencies now match the MachineInstructions
def-operand indexes, and ReadAdvances have been added on instructions with
one register operand and one memory operand.
Review: Ulrich Weigand
https://reviews.llvm.org/D47008
llvm-svn: 337538
This patch adds the following instructions:
RBIT reverse bits within each active elemnt (predicated), e.g.
rbit z0.d, p0/m, z1.d
for 8, 16, 32 and 64 bit elements.
REV reverse order of elements in data/predicate vector
(unpredicated), e.g.
rev z0.d, z1.d
rev p0.d, p1.d
for 8, 16, 32 and 64 bit elements.
REVB reverse order of bytes within each active element, e.g.
revb z0.d, p0/m, z1.d
for 16, 32 and 64 bit elements.
REVH reverse order of 16-bit half-words within each active
element, e.g.
revh z0.d, p0/m, z1.d
for 32 and 64 bit elements.
REVW reverse order of 32-bit words within each active element,
e.g.
revw z0.d, p0/m, z1.d
for 64 bit elements.
llvm-svn: 337534
MmapFixedNoReserve does not terminate process on failure.
Failure to check its result and die will always lead to harder
to debug crashes later in execution. This was observed in Go
processes due to some address space conflicts.
Consistently check result of MmapFixedNoReserve.
While we are here also add warn_unused_result attribute
to prevent such bugs in future and change return type to bool
as that's what all callers want.
Reviewed in https://reviews.llvm.org/D49367
llvm-svn: 337531
Summary: This is intended to be used for indexing, e.g. in D49417
Reviewers: ioeric, omtcyfz
Subscribers: ilya-biryukov, MaskRay, jkorous, arphaman, cfe-commits
Differential Revision: https://reviews.llvm.org/D49540
llvm-svn: 337527
For dwarf debug info, an executable normally either contains the debug
info, or it is stripped out. To reduce the storage needed (slightly)
for the debug info kept separately from the released, stripped binaries,
one can choose to only copy the debug data from the original executable
(essentially the reverse of the strip operation), producing a file with
only debug info.
When copying the debug data from an executable with GNU objcopy,
the build id and debug directory need to reside in a separate section,
as this will be kept while the rest of the .rdata section is removed.
Differential Revision: https://reviews.llvm.org/D49352
llvm-svn: 337526
Alexander Potapenko