Operand tree forwarding can cause the change of an access kind; in
particular change from a scalar kind to an array kind if the scalar
dependency is not necessary. Such an access cannot and doesn't need to
be forwarded anymore.
Fixes llvm.org/PR48034
Print to dbgs() any taken action.
Also, read-only scalars do not require any action unless
-polly-analyze-read-only-scalars=true is used. Better refect this by
using ForwardingAction::triviallyForwardable and thus not bumping the
statistics.
ScopBuilder distributes independent instructions between statements.
Only modeled (e.g. not synthesizable) instructions are represented.
To compute independence, non-modeled instructions were used in some
parts of determining instruction independence, which could lead to the
re-introduction of non-model instructions.
In particular, required invariant loads could be added to instruction
list, which then led to redundant MemoryAccesses for such a load.
This fixes llvm.org/PR48059.
If we've got an SCEVPtrToIntExpr(op), where op is not an SCEVUnknown,
we want to sink the SCEVPtrToIntExpr into an operand,
so that the operation is performed on integers,
and eventually we end up with just an `SCEVPtrToIntExpr(SCEVUnknown)`.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D89692
And use it to model LLVM IR's `ptrtoint` cast.
This is essentially an alternative to D88806, but with no chance for
all the problems it caused due to having the cast as implicit there.
(see rG7ee6c402474a2f5fd21c403e7529f97f6362fdb3)
As we've established by now, there are at least two reasons why we want this:
* It will allow SCEV to actually model the `ptrtoint` casts
and their operands, instead of treating them as `SCEVUnknown`
* It should help with initial problem of PR46786 - this should eventually allow us
to not loose pointer-ness of an expression in more cases
As discussed in [[ https://bugs.llvm.org/show_bug.cgi?id=46786 | PR46786 ]], in principle,
we could just extend `SCEVUnknown` with a `is ptrtoint` cast, because `ScalarEvolution::getPtrToIntExpr()`
should sink the cast as far down into the expression as possible,
so in the end we should always end up with `SCEVPtrToIntExpr` of `SCEVUnknown`.
But i think that it isn't the best solution, because it doesn't really matter
from memory consumption side - there probably won't be *that* many `SCEVPtrToIntExpr`s
for it to matter, and it allows for much better discoverability.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D89456
This is a long-delayed follow-up to
5e5b85098d.
`TempMDNode` includes a bunch of machinery for RAUW, and should only be
used when necessary. RAUW wasn't being used in any of these cases... it
was just a placeholder for a self-reference.
Where the real node was using `MDNode::getDistinct`, just replace the
temporary argument with `nullptr`.
Where the real node was using `MDNode::get`, the `replaceOperandWith`
call was "promoting" the node to a distinct one implicitly due to
self-reference detection in `MDNode::handleChangedOperand`. The
`TempMDNode` was serving a purpose by delaying uniquing, but it's way
simpler to just call `MDNode::getDistinct` in the first place.
Note that using a self-reference at all in these places is a hold-over
from before `distinct` metadata existed. It was an old trick to create
distinct nodes. It would be intrusive to change, including bitcode
upgrades, etc., and it's harmless so I'm not sure there's much value in
removing it from existing schemas. After this commit it still has a tiny
memory cost (in the extra metadata operand) but no more overhead in
construction.
Differential Revision: https://reviews.llvm.org/D90079
Recursively traversing the operand tree leads to an exponential blowup
if instructions are used multiple times due to every path leading to an
additional copy of the instructions after forwarding. This problem was
marked as a TODO in the code and was reported as a bug in llvm.org/PR47340.
Fix by caching already visited instructions and returning the cached
version when already visited. Instead of calling forwardTree() twice,
return a ForwardingAction structure that contains a lambda which will
carry-out the forwarding when requested. The lambdas are executed in
reverse-postorder to mimic the previous recursive calls unless there
is a reuse.
Fixes llvm.org/PR47340
getVectorPtrTy is private to VectorBlockGenerator, and all uses query
the address space from the passed-in pointer prior to calling it.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D89745
Polly incorrectly dropped the address space specified for a load instruction when it vectorized the code.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D88907
While we haven't encountered an earth-shattering problem with this yet,
by now it is pretty evident that trying to model the ptr->int cast
implicitly leads to having to update every single place that assumed
no such cast could be needed. That is of course the wrong approach.
Let's back this out, and re-attempt with some another approach,
possibly one originally suggested by Eli Friedman in
https://bugs.llvm.org/show_bug.cgi?id=46786#c20
which should hopefully spare us this pain and more.
This reverts commits 1fb6104293,
7324616660,
aaafe350bb,
e92a8e0c74.
I've kept&improved the tests though.
This relands commit 1c021c64ca which was
reverted in commit 17cec6a11a because
an assertion was being triggered, since `BuildConstantFromSCEV()`
wasn't updated to handle the case where the constant we want to truncate
is actually a pointer. I was unsuccessful in coming up with a test case
where we'd end there with constant zext/sext of a pointer,
so i didn't handle those cases there until there is a test case.
Original commit message:
While we indeed can't treat them as no-ops, i believe we can/should
do better than just modelling them as `unknown`. `inttoptr` story
is complicated, but for `ptrtoint`, it seems straight-forward
to model it just as a zext-or-trunc of unknown.
This may be important now that we track towards
making inttoptr/ptrtoint casts not no-op,
and towards preventing folding them into loads/etc
(see D88979/D88789/D88788)
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D88806
> While we indeed can't treat them as no-ops, i believe we can/should
> do better than just modelling them as `unknown`. `inttoptr` story
> is complicated, but for `ptrtoint`, it seems straight-forward
> to model it just as a zext-or-trunc of unknown.
>
> This may be important now that we track towards
> making inttoptr/ptrtoint casts not no-op,
> and towards preventing folding them into loads/etc
> (see D88979/D88789/D88788)
>
> Reviewed By: mkazantsev
>
> Differential Revision: https://reviews.llvm.org/D88806
It caused the following assert during Chromium builds:
llvm/lib/IR/Constants.cpp:1868:
static llvm::Constant *llvm::ConstantExpr::getTrunc(llvm::Constant *, llvm::Type *, bool):
Assertion `C->getType()->isIntOrIntVectorTy() && "Trunc operand must be integer"' failed.
See code review for a link to a reproducer.
This reverts commit 1c021c64ca.
While we indeed can't treat them as no-ops, i believe we can/should
do better than just modelling them as `unknown`. `inttoptr` story
is complicated, but for `ptrtoint`, it seems straight-forward
to model it just as a zext-or-trunc of unknown.
This may be important now that we track towards
making inttoptr/ptrtoint casts not no-op,
and towards preventing folding them into loads/etc
(see D88979/D88789/D88788)
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D88806
This removes "VerifyEachPass" parameters from a lot of functions which is nice.
Don't verify after special passes or VerifierPass.
This introduces verification on loop and cgscc passes, verifying the corresponding function/module.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D88764
This is in preparation for supporting -debugify-each, which adds a debug
info pass before and after each pass.
Switch VerifyEach to use this.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D88107
Before this patch, the cmake disabled loadable modules when compiling
with Visual Studio. However, the reason for this is a limitation of the
Windows DLLs, thus this restriction should apply to any compiler for the
Windows platform, such as MinGW, Cygwin, icc, etc.
Differential Revision: https://reviews.llvm.org/D87524
This applies the same fix that D84748 did for macro definitions.
Appropriate include path is now automatically set for all libraries
which link against gtest targets, which avoids the need to set
include_directories in various parts of the project.
Differential Revision: https://reviews.llvm.org/D86616
A build on `sparcv9-sun-solaris2.11` with `-DLLVM_ENABLE_PIC=Off` failed
linking `LLVMPolly.so`:
[2277/2297] Linking CXX shared module lib/LLVMPolly.so
FAILED: lib/LLVMPolly.so
[...]
ld: fatal: relocation error: R_SPARC_H44: file tools/polly/lib/CMakeFiles/obj.Polly.dir/Analysis/DependenceInfo.cpp.o: symbol .data._ZL16__gthread_active (section): invalid shared object relocation type: ABS44 code model unsupported
[...]
As on many other targets, one cannot link non-PIC objects into a shared
object on Solaris/sparcv9.
The following patch avoids this by not building the library without PIC.
It allowed the build to finish.
Differential Revision: https://reviews.llvm.org/D85627
InstStmtMap became inconsistent with ScopStmt::getInstructions() after
the statement's instructions is modified, e.g. by being considered
unused by the Simplify pass or being moved by ForwardOpTree.
Change ScopStmt::setInstructions() to also update its parent's
InstStmtMap. Also add assertions checking the consistency.
VirtualUse of type UseKind::Inter expects the definition of a
llvm::Value to be represented in another statement. In the bug report
that statement has been removed due to its domain being empty.
Scop::InstStmtMap for the llvm::Value's defintion still pointed to the
removed statement, which resulted in the use-after-free.
The defintion statement was removed by Simplify because it was
considered to not be reachable by other uses; trivially because it is
never executed due to its empty domain. However, no such thing happend
to the using statement using the value altough its domain is also empty.
Fix by always removing statements with empty domains in Simplify since
these are not properly analyzable. A UseKind::Inter should always have a
statement with its defintion due to LLVM's SSA form.
Scop::removeStmtNotInDomainMap() also removes statements with empty
domains but does so without considering the context as used by
Simplify's analyzes.
In another angle, InstStmtMap pointing to removed statements should not
happen either and ForwardOpTree would have bailed out if the llvm::Value
definition was not represented by a statement. This will be corrected in
a followup-commit.
This fixes llvm.org/PR47098
Reuse LLVM's CMakeLists.txt for gtest/gmock instead of reinventing
them in Polly. This fixes a lot of linking errors due to not linking
LLVMSupport in for me.
Differential Revision: https://reviews.llvm.org/D85280
Link ScopPassManager to LLVM dylib target if LLVM_LINK_LLVM_DYLIB
is enabled. This fixes build failures on systems where static LLVM
libraries are not installed.
Differential Revision: https://reviews.llvm.org/D85281
The test failed since commit
bc10888dc "DomTree: Make PostDomTree indifferent to block successors swap"
which is a re-commit of
c35585e20 "DomTree: Make PostDomTree immune to block successors swap"
This reverts the revert commit dc28675768.
It includes a fix for Polly, which uses SCEVExpander on IR that is not
in LCSSA form. Set PreserveLCSSA = false in that case, to ensure we do
not introduce LCSSA phis where there were none before.
This cleans up several CMakeLists.txt's where -Wno-suggest-override was manually specified. These test targets now inherit this flag from the gtest target.
Some unittests CMakeLists.txt's, in particular Flang and LLDB, are not touched by this patch. Flang manually adds the gtest sources itself in some configurations, rather than linking to LLVM's gtest target, so this fix would be insufficient to cover those cases. Similarly, LLDB has subdirectories that manually add the gtest headers to their include path without linking to the gtest target, so those subdirectories still need -Wno-suggest-override to be manually specified to compile without warnings.
Differential Revision: https://reviews.llvm.org/D84554
add_compile_options is more sensitive to its location in the file than add_definitions--it only takes effect for sources that are added after it. This updated patch ensures that the add_compile_options is done before adding any source files that depend on it.
Using add_definitions caused the flag to be passed to rc.exe on Windows and thus broke Windows builds.
After lots of follow-up fixes, there are still problems, such as
-Wno-suggest-override getting passed to the Windows Resource Compiler
because it was added with add_definitions in the CMake file.
Rather than piling on another fix, let's revert so this can be re-landed
when there's a proper fix.
This reverts commit 21c0b4c1e8.
This reverts commit 81d68ad27b.
This reverts commit a361aa5249.
This reverts commit fa42b7cf29.
This reverts commit 955f87f947.
This reverts commit 8b16e45f66.
This reverts commit 308a127a38.
This reverts commit 274b6b0c7a.
This reverts commit 1c7037a2a5.
The schedule of a fused loop has one isl_space per statement, such that
a conversion to a isl_map fails. However, the prevectorization is
interested in the schedule space only: Converting to the non-union
representation only after extracting the schedule range fixes the problem.
This fixes llvm.org/PR46578
The member LastSchedule was never set, such that printScop would always
print "n/a" instead of the last schedule.
To ensure that the isl_ctx lives as least as long as the stored
schedule, also store a shared_ptr.
Also set the schedule tree output style to ISL_YAML_STYLE_BLOCK to avoid
printing everything on a single line.
`opt -polly-opt-isl -analyze` will be used in the next commit.
If we don't know anything about the alignment of a pointer, Align(1) is
still correct: all pointers are at least 1-byte aligned.
Included in this patch is a bugfix for an issue discovered during this
cleanup: pointers with "dereferenceable" attributes/metadata were
assumed to be aligned according to the type of the pointer. This
wasn't intentional, as far as I can tell, so Loads.cpp was fixed to
stop making this assumption. Frontends may need to be updated. I
updated clang's handling of C++ references, and added a release note for
this.
Differential Revision: https://reviews.llvm.org/D80072
Along the lines of D77454 and D79968. Unlike loads and stores, the
default alignment is getPrefTypeAlign, to match the existing handling in
various places, including SelectionDAG and InstCombine.
Differential Revision: https://reviews.llvm.org/D80044
For IR generated by a compiler, this is really simple: you just take the
datalayout from the beginning of the file, and apply it to all the IR
later in the file. For optimization testcases that don't care about the
datalayout, this is also really simple: we just use the default
datalayout.
The complexity here comes from the fact that some LLVM tools allow
overriding the datalayout: some tools have an explicit flag for this,
some tools will infer a datalayout based on the code generation target.
Supporting this properly required plumbing through a bunch of new
machinery: we want to allow overriding the datalayout after the
datalayout is parsed from the file, but before we use any information
from it. Therefore, IR/bitcode parsing now has a callback to allow tools
to compute the datalayout at the appropriate time.
Not sure if I covered all the LLVM tools that want to use the callback.
(clang? lli? Misc IR manipulation tools like llvm-link?). But this is at
least enough for all the LLVM regression tests, and IR without a
datalayout is not something frontends should generate.
This change had some sort of weird effects for certain CodeGen
regression tests: if the datalayout is overridden with a datalayout with
a different program or stack address space, we now parse IR based on the
overridden datalayout, instead of the one written in the file (or the
default one, if none is specified). This broke a few AVR tests, and one
AMDGPU test.
Outside the CodeGen tests I mentioned, the test changes are all just
fixing CHECK lines and moving around datalayout lines in weird places.
Differential Revision: https://reviews.llvm.org/D78403
Due to libPolly now using the component infrastructure, it no longer carries all
dependencies as it used to do.
Differential Revision: https://reviews.llvm.org/D79295
After the update to ISL to isl-0.22.1-87-gfee05a13 and its change of
isl_*_dim returning -1 instead of 0, the -1 got wrapped-around to
UINT_MAX because Polly often uses 'unsigned' type to represent
dimensions, as ISL did before this patch. This may happen in normal
executions after an out-of-quota.
Fix by catching the error-case earlier.
This will allow us to use the datalayout to disambiguate other
constructs in IR, like load alignment. Split off from D78403.
Differential Revision: https://reviews.llvm.org/D78413
This is equivalent in terms of LLVM IR semantics, but we want to
transition away from using MaybeAlign to represent the alignment of
these instructions.
Differential Revision: https://reviews.llvm.org/D77984
The patch introduces the system to distinctively store the information
needed for the Control Flow Graph as well as the instrumentary needed for
the follow-up changes: BlockFrequencyInfo and BranchProbabilityInfo.
The patch is a part of sequence of three patches, related to graphs Heat Coloring.
Reviewers: rcorcs, apilipenko, davidxl, sfertile, fedor.sergeev, eraman, bollu
Differential Revision: https://reviews.llvm.org/D76820
The option is passed as argv to ISL's command line option parser.
Polly's own own command line options take precedence over options passed
as `-polly-isl-arg`. For instance,
`-polly-isl-arg=--schedule-outer-coincidence` will be ignored in favor
of `-polly-opt-outer-coincidence`.
Reviewed By: grosser
Differential Revision: https://reviews.llvm.org/D77303
Summary:
This patch moves the getIndexExpressionsFromGEP function from polly
into ScalarEvolution so that both polly and DependenceAnalysis can
use it for the purpose of subscript delinearization when the array
sizes are not parametric.
Authored By: bmahjour
Reviewer: Meinersbur, sebpop, fhahn, dmgreen, grosser, etiotto, bollu
Reviewed By: Meinersbur
Subscribers: hiraditya, arphaman, Whitney, ppc-slack, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73995
Pass plugins introduced in D61446 do not support dynamic linking on
Windows, hence the option LLVM_${name_upper}_LINK_INTO_TOOLS can only
work being set to "ON". Currently, it defaults to "OFF" such that such
plugins are inoperable by default on Windows. Change the default for
subprojects to follow LLVM_ENABLE_PROJECTS.
Reviewed By: serge-sans-paille, MaskRay
Differential Revision: https://reviews.llvm.org/D72372
Relative to the original commit, this fixes some warnings,
and is based on the deletion of the IRBuilder copy constructor
in D74693. The automatic copy constructor would no longer be
safe.
-----
Related llvm-dev thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/138951.html
This patch moves the IRBuilder from templating over the constant
folder and inserter towards making both of these virtual.
There are a couple of motivations for this:
1. It's not possible to share code between use-sites that use
different IRBuilder folders/inserters (short of templating the code
and moving it into headers).
2. Methods currently defined on IRBuilderBase (which is not templated)
do not use the custom inserter, resulting in subtle bugs (e.g.
incorrect InstCombine worklist management). It would be possible to
move those into the templated IRBuilder, but...
3. The vast majority of the IRBuilder implementation has to live
in the header, because it depends on the template arguments.
4. We have many unnecessary dependencies on IRBuilder.h,
because it is not easy to forward-declare. (Significant parts of
the backend depend on it via TargetLowering.h, for example.)
This patch addresses the issue by making the following changes:
* IRBuilderDefaultInserter::InsertHelper becomes virtual.
IRBuilderBase accepts a reference to it.
* IRBuilderFolder is introduced as a virtual base class. It is
implemented by ConstantFolder (default), NoFolder and TargetFolder.
IRBuilderBase has a reference to this as well.
* All the logic is moved from IRBuilder to IRBuilderBase. This means
that methods can in the future replace their IRBuilder<> & uses
(or other specific IRBuilder types) with IRBuilderBase & and thus
be usable with different IRBuilders.
* The IRBuilder class is now a thin wrapper around IRBuilderBase.
Essentially it only stores the folder and inserter and takes care
of constructing the base builder.
What this patch doesn't do, but should be simple followups after this change:
* Fixing use of the inserter for creation methods originally defined
on IRBuilderBase.
* Replacing IRBuilder<> uses in arguments with IRBuilderBase, where useful.
* Moving code from the IRBuilder header to the source file.
From the user perspective, these changes should be mostly transparent:
The only thing that consumers using a custom inserted may need to do is
inherit from IRBuilderDefaultInserter publicly and mark their InsertHelper
as public.
Differential Revision: https://reviews.llvm.org/D73835
Simply dropping the createPollyIRBuilder() function here, because
it doesn't do much. Also directly initialize Expander in
ScopExpander instead of going through the copy-constructor.
Related llvm-dev thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/138951.html
This patch moves the IRBuilder from templating over the constant
folder and inserter towards making both of these virtual.
There are a couple of motivations for this:
1. It's not possible to share code between use-sites that use
different IRBuilder folders/inserters (short of templating the code
and moving it into headers).
2. Methods currently defined on IRBuilderBase (which is not templated)
do not use the custom inserter, resulting in subtle bugs (e.g.
incorrect InstCombine worklist management). It would be possible to
move those into the templated IRBuilder, but...
3. The vast majority of the IRBuilder implementation has to live
in the header, because it depends on the template arguments.
4. We have many unnecessary dependencies on IRBuilder.h,
because it is not easy to forward-declare. (Significant parts of
the backend depend on it via TargetLowering.h, for example.)
This patch addresses the issue by making the following changes:
* IRBuilderDefaultInserter::InsertHelper becomes virtual.
IRBuilderBase accepts a reference to it.
* IRBuilderFolder is introduced as a virtual base class. It is
implemented by ConstantFolder (default), NoFolder and TargetFolder.
IRBuilderBase has a reference to this as well.
* All the logic is moved from IRBuilder to IRBuilderBase. This means
that methods can in the future replace their IRBuilder<> & uses
(or other specific IRBuilder types) with IRBuilderBase & and thus
be usable with different IRBuilders.
* The IRBuilder class is now a thin wrapper around IRBuilderBase.
Essentially it only stores the folder and inserter and takes care
of constructing the base builder.
What this patch doesn't do, but should be simple followups after this change:
* Fixing use of the inserter for creation methods originally defined
on IRBuilderBase.
* Replacing IRBuilder<> uses in arguments with IRBuilderBase, where useful.
* Moving code from the IRBuilder header to the source file.
From the user perspective, these changes should be mostly transparent:
The only thing that consumers using a custom inserted may need to do is
inherit from IRBuilderDefaultInserter publicly and mark their InsertHelper
as public.
Differential Revision: https://reviews.llvm.org/D73835
This reverts commit 80a34ae311 with fixes.
Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.
This reverts commit 80a34ae311 with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
../polly/lib/Transform/ScheduleOptimizer.cpp:812:54: warning: comparison of integers of different signs: 'isl_size' (aka 'int') and 'const unsigned int' [-Wsign-compare]
isl_schedule_node_band_n_member(Node.get()) >
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
Static chunked OpenMP scheduling has not been treated correctly.
This patch fixes the problem that threads would not process their
(work-)chunks as intended.
Differential Revision: https://reviews.llvm.org/D61081
The primary motivation is to fix an assertion failure in
isl_basic_map_alloc_equality:
isl_assert(ctx, room_for_con(bmap, 1), return -1);
Although the assertion does not occur anymore, I could not identify
which of ISL's commits fixed it.
Compared to the previous ISL version, Polly requires some changes for this update
* Since ISL commit
20d3574 "perform parameter alignment by modifying both arguments to function"
isl_*_gist_* and similar functions do not always align the paramter
list anymore. This caused the parameter lists in JScop files to
become out-of-sync. Since many regression tests use JScop files with
a fixed parameter list and order, we explicitly call align_params to
ensure a predictable parameter list.
* ISL changed some return types to isl_size, a typedef of (signed) int.
This caused some issues where the return type was unsigned int before:
- No overload for std::max(unsigned,isl_size)
- It cause additional 'mixed signed/unsigned comparison' warnings.
Since they do not break compilation, and sizes larger than 2^31
were never supported, I am going to fix it separately.
* With the change to isl_size, commit
57d547 "isl_*_list_size: return isl_size"
also changed the return value in case of an error from 0 to -1. This
caused undefined looping over isl_iterator since the 'end iterator'
got index -1, never reached from the 'begin iterator' with index 0.
* Some internal changes in ISL caused the number of operations to
increase when determining access ranges to determine aliasing
overlaps. In one test, this caused exceeding the default limit of
800000. The operations-limit was disabled for this test.
The idiom
for (auto i = n - n; i < n; i += 1)
was intended to automatically derive the type of i from n
(signed/unsigned int) and avoid the 'mixed signed/unsigned comparison'
warning. However, almost-always-auto was never used in the LLVM coding
style (although we used it in Polly for some time) and I did never
intended to use this idiom upstream.
PVS Studio may warns about this idiom as 'warning: both sides of
operator are equivalent [misc-redundant-expression]'.
Remove the use of auto and directly use unsigned.
Also see http://llvm.org/PR44768
Commit 777180a "[ADT] Make StringRef's std::string conversion operator explicit"
caused Polly's GPU code generator to not compile anymore. The rest of
Polly has already been fixed in commit
0257a9 "Fix polly build after StringRef change."
Previously, the enums didn't account for all the possible cases, which
could cause misleading results (particularly for a "switch" on
FunctionModRefBehavior).
Fixes regression in polly from recent patch to add writeonly to memset.
While I'm here, also fix a few dubious uses of the FMRB_* enum values.
Differential Revision: https://reviews.llvm.org/D73154
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
Scope of changes:
1) Moved RecordedAssumptions vector to ScopBuilder. RecordedAssumptions are used only for Scop constructions.
2) Moved definition of RecordedAssumptionsTy to ScopHelper. It is required both by ScopBuilder and SCEVAffinator.
3) Add new function recordAssumption to ScopHelper. One of its argument is a reference to RecordedAssumption vector. This function is used by ScopBuilder and SCEVAffinator.
4) All RecordedAssumptions are created by ScopBuilder. isl::pw_aff
objects for corresponding SCEVs are created inside ScopBuilder. Scop
functions do not record any assumptions. Scop can use isl::pw_aff
objects which were created by ScopBuilder.
5) Removed functions for handling RecordedAssumptions from Scop class.
6) Removed constness from getScopArrayInfo functions.
7) Replaced SCEVVisitor struct from SCEVAffinator with taylored version, which allow to pass pointer to RecordedAssumptions as function argument.
Differential Revision: https://reviews.llvm.org/D68056
This is (more?) usable by GDB pretty printers and seems nicer to write.
There's one tricky caveat that in C++14 (LLVM's codebase today) the
static constexpr member declaration is not a definition - so odr use of
this constant requires an out of line definition, which won't be
provided (that'd make all these trait classes more annoyidng/expensive
to maintain). But the use of this constant in the library implementation
is/should always be in a non-odr context - only two unit tests needed to
be touched to cope with this/avoid odr using these constants.
Based on/expanded from D72590 by Christian Sigg.
- Update documentation now that the move to monorepo has been made
- Do not tie compiler extension testing to LLVM_BUILD_EXAMPLES
- No need to specify LLVM libraries for plugins
- Add NO_MODULE option to match Polly specific requirements (i.e. building the
module *and* linking it statically)
- Issue a warning when building the compiler extension with
LLVM_BYE_LINK_INTO_TOOLS=ON, as it modifies the behavior of clang, which only
makes sense for testing purpose.
Still mark llvm/test/Feature/load_extension.ll as XFAIL because of a
ManagedStatic dependency that's going to be fixed in a seperate commit.
Differential Revision: https://reviews.llvm.org/D72327
Configure CMake to setup source-groups for Polly. Source groups
describe how source files should be organized in IDEs. By default, all
headers are dumped into one folder under PollyCore and all source files
into another. On disk, these files are organized into folders, but this
isn't reflected in the IDE. This change uses CMake source groups to have
the IDE reflect the on disk layout. This will make it easier to visualize
the project structure for users of Visual Studio and XCode
Patch by Christopher Tetreault <ctetreau@quicinc.com>
Reviewed By: Meinersbur, grosser
Differential Revision: https://reviews.llvm.org/D72117
There's quite a lot of references to Polly in the LLVM CMake codebase. However
the registration pattern used by Polly could be useful to other external
projects: thanks to that mechanism it would be possible to develop LLVM
extension without touching the LLVM code base.
This patch has two effects:
1. Remove all code specific to Polly in the llvm/clang codebase, replaicing it
with a generic mechanism
2. Provide a generic mechanism to register compiler extensions.
A compiler extension is similar to a pass plugin, with the notable difference
that the compiler extension can be configured to be built dynamically (like
plugins) or statically (like regular passes).
As a result, people willing to add extra passes to clang/opt can do it using a
separate code repo, but still have their pass be linked in clang/opt as built-in
passes.
Differential Revision: https://reviews.llvm.org/D61446
Previously, the polly unit tests were stuck in a infinite loop.
There was an edge case in StringRef::count() introduced by 9f6b13e5cc, where an empty 'Str' would cause the function to never exit.
Also fixed usage in polly.
Adapt for 05da2fe521 "Sink all InitializePasses.h includes" which
forgot the GPGPU files (presumably because POLLY_ENABLE_GPGPU_CODEGEN
is OFF by default).
Avoids the need to include TargetMachine.h from various places just for
an enum. Various other enums live here, such as the optimization level,
TLS model, etc. Data suggests that this change probably doesn't matter,
but it seems nice to have anyway.
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Commit 395124 "NVPTX: Don't insert an extra empty line at the end of the last section"
changed the length of the kernel payload. Update the regression test to the new binary size.
Root cause is VectorBlockGenerator::copyStmt iterates all instructions
in basic block, however some load instructions may be not unnecessary
thus removed by simplification. As a result, these load instructions
don't have a corresponding array.
Looking at BlockGenerator::copyBB, it only iterates instructions list
of ScopStmt. Given it must be a block type scop in case of
vectorization, I think we should do the same in
VectorBlockGenerator::copyStmt.
Patch by bin.narwal <bin.narwal@gmail.com>
Differential Revision: https://reviews.llvm.org/D70076
ScopBuilder::buildEqivClassBlockStmts creates ScopStmts for instruction
groups in basic block and inserts these ScopStmts into Scop::StmtMap,
however, as described in llvm.org/PR38358, comment #5, StmtScops are
inserted into vector ScopStmt[BB] in wrong order. As a result,
ScopBuilder::buildSchedule creates wrong order sequence node.
Looking closer to code, it's clear there is no equivalent classes with
interleaving isOrderedInstruction(memory access) instructions after
joinOrderedInstructions. Afterwards, ScopStmts need to be created and
inserted in the original order of memory access instructions, however,
at the moment ScopStmts are inserted in the order of leader instructions
which are probably not memory access instructions.
The fix is simple with a standalone loop scanning
isOrderedInstruction(memory access) instructions in basic block and
inserting elements into LeaderToInstList one by one. The patch also
removes double reversing operations which are now unnecessary.
New test preserve-equiv-class-order-in-basic_block.ll is also added.
Differential Revision: https://reviews.llvm.org/D68941
llvm-svn: 375192
Since the removal of extensions nodes from schedule trees in r362257 it
is possible to emit parallel code for SCoPs containing
matrix-multiplications. However, the code looking for references used in
outlined statement was not prepared to handle CopyStmts introduced by
the matrix-matrix multiplication detection.
In this case, CopyStmts do not introduce references in addition to the
ones captured by MemoryAccesses, i.e. we change the assertion to accept
CopyStmts and add a regression test for this case.
This fixes llvm.org/PR43164
llvm-svn: 372188
lib/Transform/ScheduleOptimizer.cpp fails to compile on Solaris, both on the 9.x
branch (first noticed when running test-release.sh without -no-polly) and on trunk:
/var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/tools/polly/lib/Transform/ScheduleOptimizer.cpp: In function ‘MicroKernelParamsTy getMicroKernelParams(const llvm::TargetTransformInfo*, polly::MatMulInfoTy)’:
/var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/tools/polly/lib/Transform/ScheduleOptimizer.cpp:914:62: error: call of overloaded ‘sqrt(long unsigned int)’ is ambiguous
914 | ceil(sqrt(Nvec * LatencyVectorFma * ThroughputVectorFma) / Nvec) * Nvec;
| ^
In file included from /usr/gcc/9/lib/gcc/x86_64-pc-solaris2.11/9.1.0/include-fixed/math.h:24,
from /usr/gcc/9/include/c++/9.1.0/cmath:45,
from /var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/include/llvm-c/DataTypes.h:28,
from /var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/include/llvm/Support/DataTypes.h:16,
from /var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/include/llvm/ADT/Hashing.h:47,
from /var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/include/llvm/ADT/ArrayRef.h:12,
from /var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/tools/polly/include/polly/ScheduleOptimizer.h:12,
from /var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/tools/polly/lib/Transform/ScheduleOptimizer.cpp:48:
/usr/gcc/9/lib/gcc/x86_64-pc-solaris2.11/9.1.0/include-fixed/iso/math_iso.h:220:21: note: candidate: ‘long double std::sqrt(long double)’
220 | inline long double sqrt(long double __X) { return __sqrtl(__X); }
| ^~~~
/usr/gcc/9/lib/gcc/x86_64-pc-solaris2.11/9.1.0/include-fixed/iso/math_iso.h:186:15:
note: candidate: ‘float std::sqrt(float)’
186 | inline float sqrt(float __X) { return __sqrtf(__X); }
| ^~~~
/usr/gcc/9/lib/gcc/x86_64-pc-solaris2.11/9.1.0/include-fixed/iso/math_iso.h:74:15:
note: candidate: ‘double std::sqrt(double)’
74 | extern double sqrt __P((double));
| ^~~~
/var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/tools/polly/lib/Transform/ScheduleOptimizer.cpp:915:67:
error: call of overloaded ‘ceil(long unsigned int)’ is ambiguous
915 | int Mr = ceil(Nvec * LatencyVectorFma * ThroughputVectorFma / Nr);
| ^
In file included from /usr/gcc/9/lib/gcc/x86_64-pc-solaris2.11/9.1.0/include-fixed/math.h:24,
from /usr/gcc/9/include/c++/9.1.0/cmath:45,
from /var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/include/llvm-c/DataTypes.h:28,
from /var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/include/llvm/Support/DataTypes.h:16,
from /var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/include/llvm/ADT/Hashing.h:47,
from /var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/include/llvm/ADT/ArrayRef.h:12,
from /var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/tools/polly/include/polly/ScheduleOptimizer.h:12,
from /var/llvm/llvm-9.0.0-rc4/rc4/llvm.src/tools/polly/lib/Transform/ScheduleOptimizer.cpp:48:
/usr/gcc/9/lib/gcc/x86_64-pc-solaris2.11/9.1.0/include-fixed/iso/math_iso.h:196:21: note: candidate: ‘long double std::ceil(long double)’
196 | inline long double ceil(long double __X) { return __ceill(__X); }
| ^~~~
/usr/gcc/9/lib/gcc/x86_64-pc-solaris2.11/9.1.0/include-fixed/iso/math_iso.h:160:15:
note: candidate: ‘float std::ceil(float)’
160 | inline float ceil(float __X) { return __ceilf(__X); }
| ^~~~
/usr/gcc/9/lib/gcc/x86_64-pc-solaris2.11/9.1.0/include-fixed/iso/math_iso.h:76:15:
note: candidate: ‘double std::ceil(double)’
76 | extern double ceil __P((double));
| ^~~~
Fixed by adding casts to disambiguate, checked that it now compiles on both
amd64-pc-solaris2.11 and sparcv9-sun-solaris2.11 and on x86_64-pc-linux-gnu.
Differential Revision: https://reviews.llvm.org/D67442
llvm-svn: 371825
Function joinOrderedInstructions merges instructions when a leader is encountered twice.
It also notices that leaders in SeenLeaders may lose their leadership in previous merging,
and tries to handle the case using following code:
Instruction *PrevLeader = UnionFind.getLeaderValue(SeenLeaders.back());
However, this is wrong because it always gets leader for the last element of SeenLeaders,
and I believe it's wrong even we get leader for Prev here. As a result, Statements in cases
like the one in patch aren't merged as expected. After investigation, I believe it's
unnecessary to get leader instruction at all. This is based on fact: Although leaders in
SeenLeaders could lose leadership, they only lose to others in SeenLeaders, in other words,
one existing leader will be chosen as new leader of merged equivalent statements. We can
take advantage of this and simply check if current leader equals to Prev and break merging
if it does.
The patch also adds a new test.
Patch by bin.narwal <bin.narwal@gmail.com>
Differential Revision: https://reviews.llvm.org/D67007
llvm-svn: 371801
When reading code of Dependences::calculateDependences, I noticed that
WAR is computed specifically by buildWAR. Given ISL now
supports "kills" in approximate dataflow analysis, this patch takes
advantage of it.
This patch also cleans up a couple lines redundant codes.
Patch by bin.narwal <bin.narwal@gmail.com>
Differential Revision: https://reviews.llvm.org/D66741
llvm-svn: 370396
The while loop iterating parent loop in ScopBuilder::buildDomains is
unnecessary because either L or LD are later unused, this is a simple
patch removing it.
Patch by bin.narwal <bin.narwal@gmail.com>
Differential Revision: https://reviews.llvm.org/D66698
llvm-svn: 370368
When reading code in ScopBuilder::buildEqivClassBlockStmts, I think the
main statement flag computation can be simplified, here is the patch.
It's based on two simple facts that:
1. Instruction won't be removed once it's inserted into UnionFind.
2. Main statement must be set if there is non-trivial statement besides the last one.
The patch also saves std::find call.
Patch by bin.narwal <bin.narwal@gmail.com>
Differential Revision: https://reviews.llvm.org/D66477
llvm-svn: 369972
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368935
Scope of changes:
1) Moved buildDomains function to ScopBuilder class.
2) Moved buildDomainsWithBranchConstraints function to ScopBuilder class.
3) Moved propagateDomainConstraints to ScopBuilder class.
4) Moved propagateDomainConstraintsToRegionExit to ScopBuilder class.
5) Moved propagateInvalidStmtDomains to ScopBuilder class.
6) Moved getPredecessorDomainConstraints function to ScopBuilder class.
7) Moved addLoopBoundsToHeaderDomain function to ScopBuilder class.
8) Moved getPwAff function to ScopBuilder class.
9) Moved buildConditionSets functions to ScopBuilder class.
10) Added updateMaxLoopDepth, notifyErrorBlock, getOrInitEmptyDomain, isDomainDefined, setDomain functions to Scop class. They are used by ScopBuilder.
11) Moved helper functions: getRegionNodeBasicBlock, getRegionNodeSuccessor, containsErrorBlock, createNextIterationMap, collectBoundedParts, partitionSetParts, buildConditionSet to ScopBuilder.cpp file.
Differential Revision: https://reviews.llvm.org/D65729
llvm-svn: 368100
Scope of changes:
1) Moved addUserAssumptions function to ScopBuilder class.
2) Moved buildConditionSets functions to polly namespace.
3) Moved getRepresentingInvariantLoadSCEV to public section of the Scop class
Differential Revision: https://reviews.llvm.org/D65241
llvm-svn: 368089
Scope of changes:
1. Moved buildSchedule functions to ScopBuilder.
2. Moved combineInSequence function to ScopBuilder.
3. Moved mapToDimension function to ScopBuilder.
4. Moved LoopStackTy to ScopBuilder.
5. Moved getLoopSurroundingScop to ScopHelper.
6. Moved getNumBlocksInLoop to ScopHelper.
7. Moved getNumBlocksInRegionNode to ScopHelper.
8. Moved getRegionNodeLoop to ScopHelper.
Differential Revision: https://reviews.llvm.org/D64223
llvm-svn: 366377
Scope of changes:
1) Moved finalizeAccesses to ScopBuilder
2) Moved updateAccessDimensionality to ScopBuilder
3) Moved foldSizeConstantsToRight to ScopBuilder
4) Moved foldSizeConstantsToRight to ScopBuilder
5) Moved assumeNoOutOfBounds to ScopBuilder
6) Moved markFortranArrays to ScopBuilder
7) Added iterator range for AccessFunctions vector.
Differential Revision: https://reviews.llvm.org/D63794
llvm-svn: 366374
Scope of changes:
1) Moved addUserContext to ScopBuilder.
2) Moved command line option UserContextStr to ScopBuilder.
Differential Revision: https://reviews.llvm.org/D63740
llvm-svn: 366266
Scope of changes:
1) Moved buildAliasChecks to ScopBuilder.
2) Moved buildAliasGroup to ScopBuilder.
3) Moved buildAliasGroups to ScopBuilder.
4) Moved buildAliasGroupsForAccesses to ScopBuilder.
5) Moved splitAliasGroupsByDomain to ScopBuilder.
6) Moved addNonEmptyDomainConstraints to ScopBuilder.
7) Moved buildMinMaxAccess to ScopBuilder.
8) Moved calculateMinMaxAccess to ScopBuilder.
9) Moved getAccessDomain to ScopBuilder.
10) Moved command line options used only by buildAliasChecks functions to ScopBuilder.
11) Refactored buildAliasGroup function. Added addAliasGroup function to Scop class for pushing back calculated min/max accesses.
12) Added function incrementNumberOfAliasingAssumptions which increments number of statistic variable AssumptionsAliasing. AssumptionsAliasing variable is defined by STATISTIC macro inside ScopInfo.cpp and it is also used by function trackAssumption from Scop class.
13) Added reference to OptimizationRemarkEmitter to ScopBuilder class.
14) Moved calculateMinMaxAccess function to ScopBuilder class.
Differential Revision: https://reviews.llvm.org/D63693
llvm-svn: 366262
Scope of changes:
1) Moved addRecordedAssumptions to ScopBuilder.
2) Moved Assumption struct outside Scop class.
3) Refactored addRecordedAssumptions function. Replaced while loop by
for range loop.
4) Added function to clear processed Assumptions.
Differential Revision: https://reviews.llvm.org/D63572
llvm-svn: 366260
The Loads.h API changed so that a Type parameter is now mandatory in
preparation for pointer types being opaque. Unfortunately I don't build
polly routinely and it still had some uses. This just provides the
(obvious) load type in each case.
llvm-svn: 365470
https://reviews.llvm.org/D61934, committed as r362687, r363540, r363364
and r363147, made some emitted instruction nus/nsw. Add these falgs to
Polly's regression tests.
This should fix
Polly :: Isl/CodeGen/partial_write_in_region_with_loop.ll
Polly :: Isl/CodeGen/scev_expansion_in_nonaffine.ll
llvm-svn: 363599
FunctionAnalysisManagerModuleProxy started to be used by the
AlwaysInlinerPass in r363287 and therefore had to be registered in the
New PassManager.
Should fix the regression tests
Polly :: ScopInliner/invariant-load-func.ll
Polly :: ScopInliner/simple-inline-loop.ll
llvm-svn: 363572
Moved addInvariantLoads and functions listed below to ScopBuilder:
isAParameter
canAlwaysBeHoisted
These functions were referenced only by getNonHoistableCtx.
Moved CLI parameter PollyAllowDereferenceOfAllFunctionParams to
ScopBuilder.
Added iterator range through InvariantEquivClasses.
Patch by Dominik Adamski <adamski.dominik@gmail.com>
Differential Revision: https://reviews.llvm.org/D63172
llvm-svn: 363216
This review is based on review: https://reviews.llvm.org/D62925 . It is
part of moving hoistInvariantLoads function and all functions referenced
only by hoistInvariantLoads to ScopBuilder.
Moved getNonHoistableCtx and functions listed below to ScopBuilder:
isRequiredInvariantLoad
hasNonHoistableBasePtrInScop
isAccessRangeTooComplex
These functions were referenced only by getNonHoistableCtx.
MaxDimensionsInAccessRange and MaxDisjunctsInDomain constant is marked
as extern and it is added to polly namespace. It is used by Scop and
ScopBuilder classes.
MaxDimensionsInAccessRange constant moved to ScopBuilder. It is not used
outside ScopBuilder.
Patch by Dominik Adamski <adamski.dominik@gmail.com>
Differential Revision: https://reviews.llvm.org/D63066
llvm-svn: 363214
Refactor Scop and ScopBuilder class:
1. Move hoistInvariantLoads function from Scop to ScopBuilder class.
2. Private functions (addInvariantLoads, getNonHoistableCtx) are moved
to public section of Scop class. hoistInvariantLoads function
references these functions. These functions will be moved to
ScopBuilder as well in the next steps.
Patch by Dominik Adamski <adamski.dominik@gmail.com>
Differential Revision: https://reviews.llvm.org/D62925
llvm-svn: 363121
Refactor Scop and ScopBuilder class. Move canonicalizeDynamicsBasePtrs
and corresponding static functions from ScopInfo.cpp to ScopBuilder.cpp
Patch by Dominik Adamski <adamski.dominik@gmail.com>
Differential Revision: https://reviews.llvm.org/D62781
llvm-svn: 362554
Extension nodes make schedule trees are less flexible: Many operations,
such as rescheduling, do not work on such schedule trees with extension.
As such, some functionality such as determining parallel loops in isl's
AST are disabled.
Currently, only the pattern-matching generalized matrix-matrix
multiplication optimization adds extension nodes (to add copy-in
statements).
This patch removes all extension nodes as the last step of the schedule
optimization by hoisting the extension node's added domain up to the
root domain node. All following passes can assume that schedule trees
work without restrictions, including the parallelism test. Mark the
outermost loop of the optimized matrix-matrix multiplication as parallel
such that -polly-parallel is able to parallelize that loop.
Differential Revision: https://reviews.llvm.org/D58202
llvm-svn: 362257
Refactor Scop and ScopBuilder class. Move
buildInvariantEquivalenceClasses function from Scop class to ScopBuilder
class.
Patch by: Dominik Adamski <adamski.dominik@gmail.com>
Differential Revision: https://reviews.llvm.org/D62351
llvm-svn: 361902
isl_map_from_union_map cannot determine the map's space if the union_map
is empty. polly::singleton was designed for this case. We pass the
expected map space to avoid crashing in isl_map_from_union_map.
This fixes an issue found by the aosp buildbot. Thanks to Eli Friedman
for the reproducer.
llvm-svn: 361290
At the end of a region statement, the PHINode must be generated
while the current IRBuilder's block is the region's exit node. For
obvious reasons: The PHINode references the region's exiting block.
A partial write would insert new control flow, i.e. insert new basic
blocks between the exiting blocks and the current block.
We fix this by generating the PHI nodes (region exit values) before
generating any MemoryAccess's stores.
This should fix the AOSP buildbot.
Reported-by: Eli Friedman <efriedma@quicinc.com>
llvm-svn: 361204
Fix scan-analyzer issue:
Value stored to 'WARMemAccesses' during its initialization is never read
Patch by Dominik Adamski <adamski.dominik@gmail.com>
Signed-off-by: Dominik Adamski <adamski.dominik@gmail.com>
llvm-svn: 361196
The iteration order of OutsideLoopIterations matters for
IslNodeBuilder::getReferencesInSubtree, which inserts the values from
the map into a SetVector, which is eventually used to construct the
type of the context for parallel loops.
llvm-svn: 360723
In certain cases, it's possible for delinearization to decide one of the
array dimensions should be some function of an induction variable inside
the scop. Make sure if this happens, we refuse to use those dimensions
for delinearization.
Usually, we end up rejecting the scop before it actually crashes, but it
looks like it's possible to slip past other checks in certain cases
involving smax expressions.
Fixes a crash that started showing up this week on the polly AOSP
builder. As far as I can tell, this is a longstanding issue, though;
it was just exposed by better SCEV analysis of smin expressions.
Differential Revision: https://reviews.llvm.org/D61807
llvm-svn: 360708
PHI nodes (reads) could point to multiple instances of predecessor
blocks (PHI writes) when in an invalid context. Fix by removing PHI
instances that are in an invalid or ouside assumed context.
This fixes llvm.org/PR41656.
llvm-svn: 360454
This removes unused includes (and forward declarations) as
suggested by include-what-you-use. If a transitive include of a removed
include is required to compile a file, I added the required header (or
forward declaration if suggested by include-what-you-use).
This should reduce compilation time and reduce the number of iterative
recompilations when a header was changed.
llvm-svn: 357209
Split out from D59749. The current implementation of isWrappedSet()
doesn't do what it says on the tin, and treats ranges like
[X, Max] as wrapping, because they are represented as [X, 0) when
using half-inclusive ranges. This also makes it inconsistent with
the semantics of isSignWrappedSet().
This patch renames isWrappedSet() to isUpperWrapped(), in preparation
for the introduction of a new isWrappedSet() method with corrected
behavior.
llvm-svn: 357107
Compiling with -polly-target=hybrid was causing Polly to occur two times
in the pipeline. The reason was how the ManagedMemoryRewritePass was
registered in the pass manager. ManagedMemoryRewritePass being a
ModulePass was forcing all previous passes to get recomputed. This
commit avoids Polly to appear two times in the pipeline registering the
ManagedMemoryRewritePass later in the pass manager.
Patch by Lorenzo Chelini <l.chelini@icloud.com>
Differential Revision: https://reviews.llvm.org/D59263
llvm-svn: 356965
The ParallelLoopGenerator class is changed such that GNU OpenMP specific
code was removed, allowing to use it as super class in a
template-pattern. Therefore, the code has been reorganized and one may
not use the ParallelLoopGenerator directly anymore, instead specific
implementations have to be provided. These implementations contain the
library-specific code. As such, the "GOMP" (code completely taken from
the existing backend) and "KMP" variant were created.
For "check-polly" all tests that involved "GOMP": equivalents were added
that test the new functionalities, like static scheduling and different
chunk sizes. "docs/UsingPollyWithClang.rst" shows how the alternative
backend may be used.
Patch by Michael Halkenhäuser <michaelhalk@web.de>
Differential Revision: https://reviews.llvm.org/D59100
llvm-svn: 356434
This fixes most references to the paths:
llvm.org/svn/
llvm.org/git/
llvm.org/viewvc/
github.com/llvm-mirror/
github.com/llvm-project/
reviews.llvm.org/diffusion/
to instead point to https://github.com/llvm/llvm-project.
This is *not* a trivial substitution, because additionally, all the
checkout instructions had to be migrated to instruct users on how to
use the monorepo layout, setting LLVM_ENABLE_PROJECTS instead of
checking out various projects into various subdirectories.
I've attempted to not change any scripts here, only documentation. The
scripts will have to be addressed separately.
Additionally, I've deleted one document which appeared to be outdated
and unneeded:
lldb/docs/building-with-debug-llvm.txt
Differential Revision: https://reviews.llvm.org/D57330
llvm-svn: 352514
all missed!
Thanks to Alex Bradbury for pointing this out, and the fact that I never
added the intended `legacy` anchor to the developer policy. Add that
anchor too. With hope, this will cause the links to all resolve
successfully.
llvm-svn: 351731
to reflect the new license. These used slightly different spellings that
defeated my regular expressions.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351648
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This installs the new developer policy and moves all of the license
files across all LLVM projects in the monorepo to the new license
structure. The remaining projects will be moved independently.
Note that I've left odd formatting and other idiosyncracies of the
legacy license structure text alone to make the diff easier to read.
Critically, note that we do not in any case *remove* the old license
notice or terms, as that remains necessary until we finish the
relicensing process.
I've updated a few license files that refer to the LLVM license to
instead simply refer generically to whatever license the LLVM project is
under, basically trying to minimize confusion.
This is really the culmination of so many people. Chris led the
community discussions, drafted the policy update and organized the
multi-year string of meeting between lawyers across the community to
figure out the strategy. Numerous lawyers at companies in the community
spent their time figuring out initial answers, and then the Foundation's
lawyer Heather Meeker has done *so* much to help refine and get us ready
here. I could keep going on, but I just want to make sure everyone
realizes what a huge community effort this has been from the begining.
Differential Revision: https://reviews.llvm.org/D56897
llvm-svn: 351631
compiler identification lines in test-cases.
(Doing so only because it's then easier to search for references which
are actually important and need fixing.)
llvm-svn: 351200
CMake generates the exports file wrongly if the CMAKE_BUILD_TYPE is
unset for multi-configuration generators.
The generated file lib/cmake/polly/PollyExports-all.cmake then contains:
set_target_properties(LLVMPolly PROPERTIES
IMPORTED_LOCATION_ my_build_dir/lib/LLVMPolly.so)
set_target_properties(Polly PROPERTIES
IMPORTED_LOCATION_ my_build_dir/lib/libPolly.a)
This patch conditionalizes the underscore.
Patch by: Marcin Copik
Differential Revision: D53376
llvm-svn: 346231
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
This removes the primary remaining API producing `TerminatorInst` which
will reduce the rate at which code is introduced trying to use it and
generally make it much easier to remove the remaining APIs across the
codebase.
Also clean up some of the stragglers that the previous mechanical update
of variables missed.
Users of LLVM and out-of-tree code generally will need to update any
explicit variable types to handle this. Replacing `TerminatorInst` with
`Instruction` (or `auto`) almost always works. Most of these edits were
made in prior commits using the perl one-liner:
```
perl -i -ple 's/TerminatorInst(\b.* = .*getTerminator\(\))/Instruction\1/g'
```
This also my break some rare use cases where people overload for both
`Instruction` and `TerminatorInst`, but these should be easily fixed by
removing the `TerminatorInst` overload.
llvm-svn: 344504
IslAst could mark two nested outer loops as "OutermostParallel". It
caused that the code generator tried to OpenMP-parallelize both loops,
which it is not prepared loop.
It was because the recursive AST build algorithm managed a flag
"InParallelFor" to ensure that no nested loop is also marked as
"OutermostParallel". Unfortunatetly the same flag was used by nodes
marked as SIMD, and reset to false after the SIMD node. Since loops can
be marked as SIMD inside "OutermostParallel" loops, the recursive
algorithm again tried to mark loops as "OutermostParellel" although
still nested inside another "OutermostParallel" loop.
The fix exposed another bug: The function "astScheduleDimIsParallel" was
only called when a loop was potentially "OutermostParallel" or
"InnermostParallel", but as a side-effect also determines the minimum
dependence distance. Hence, changing when we need to know whether a loop
is "OutermostParallel" also changed which loop was annotated with
"#pragma minimal dependence distance".
Moreover, some complex condition linked with "InParallelFor" determined
whether a loop should be an "InnermostParallel" loop. It missed some
situations where it would not use mark as such although being inside an
SIMD mark node, and therefore not be annotated using "#pragma simd".
The changes in particular:
1. Split the "InParallelFor" flag into an "InParallelFor" and an
"InSIMD" flag.
2. Unconditionally call "astScheduleDimIsParallel" for its side-effects
and store the result in "InParallel" for later use.
3. Simplify the condition when a loop is "InnermostParallel".
Fixes llvm.org/PR33153 and llvm.org/PR38073.
llvm-svn: 343212
The general-purpose add() now sometimes adds unexpected loop-variant
pointers to the AliasSetTracker, so certain loops would be rejected with
-polly-allow-modref-calls. Use addUnknown() instead, which has the old
behavior.
I'm not completely convinced the resulting behavior is actually
correct: ScopDetection::isValidAccess seems to mostly ignore
"unknown" instructions in the AliasSetTracker. But it's not any worse
than what was happening before.
Committing without pre-commit review to unbreak the buildbots; the
following tests were failing:
test/ScopInfo/mod_ref_access_pointee_arguments.ll
test/ScopInfo/mod_ref_read_pointee_arguments.ll
test/ScopInfo/multidim_2d_with_modref_call_2.ll
llvm-svn: 342010
Summary:
Update all rdtscp callsites in PerfMonitor so that they conform with the signature changes introduced in r341698.
Reviewers: grosser, bollu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51928
llvm-svn: 341946
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
The method AliasSetTracker::getAliasSetForPointer was removed and replaced by AliasSetTracker::getAliasSetFor for the restructuring in r339930.
Since Polly uses AliasSetTracker::getAliasSetForPointer, a temporary fix has been committed in r339937 with a comment:
Can someone from polly please migrate usage and then delete the wrapper?
This commit is doing exactly that.
llvm-svn: 340072
We upstreamed the export of isl_val_2exp, to the official cpp bindings.
In this process, we concluded that pow2 is a better and more widely used
name for this functionality. Hence, both the official isl-cpp bindings
and our derived variant use now the term pow2.
llvm-svn: 339312
Latest isl versions require clang to build a 'dist' package. Make sure
we actually ask for it.
While being there, also make sure we build isl on all cores.
llvm-svn: 339094
Silence the warning
warning: ignoring return value of function declared with 'warn_unused_result' attribute [-Wunused-result]
JSONExporter is a developer tool, there is no mechanism for error
handling. Print the parser error and abort with a fatal error.
llvm-svn: 338659
The domain generation used nullptr to mark the domain of an error block
as never-executed. Later, nullptr domains are recreated with a
zero-tuple domain that then mismatches with the expected domain the
error block within the loop.
Instead of using nullptr, assign an empty domain which preserves the
expected space. Remove empty domains during SCoP simplification.
Fixes llvm.org/PR38218.
llvm-svn: 338646
The latest version of the isl C++ bindings does not export the 'set'
method yet. Fall back to the C interface until this method can be
exported.
llvm-svn: 338512
These namespace qualifiers are not needed. Dropping them brings us
closer to the official isl namespace qualifiers.
While the delta of this change set is large, it only mechanically drops
the 'isl::' prefixes.
llvm-svn: 338505
The main difference in this change is that isl_stat is now always
checked by default. As we elminiated most used of isl_stat, thanks to
Philip Pfaffe's implementation of foreach, only a small set of changes
is needed.
This change does not include the following recent changes to isl's C++
bindings:
- stricter error handling for isl_bool
- dropping of the isl::namespace qualifiers
The former requires a larger patch in Polly and consequently should go
through a patch-review. The latter will be applied in the next commit to
keep this commit free from noise.
We also still apply a couple of other changes on top of the official isl
bindings. This delta is expected to shrink over time.
llvm-svn: 338504
Summary:
With the new accessors, it's straightforward to use the templated
iterator instead of subclassing it for all the list types.
Depends on D49019
Reviewers: grosser, Meinersbur, bollu
Reviewed By: grosser
Subscribers: mehdi_amini, steven_wu, dexonsmith, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D49021
llvm-svn: 337702
This time we replace for loops where the return isl::stat::error has
been used to carry status information.
There are still two uses of foreach remaining as we do not have a
corresponding for implementation for pw_aff functions.
llvm-svn: 337239
After Philip added support for range-based for loops to our C++
bindings, we now convert another bunch of foreach calls to range-for loops.
This improves general readability of the code.
llvm-svn: 337201
Fix the following error when Sphinx generates the Polly manpage:
Warning, treated as error:
docs/Performance.rst:: WARNING: "table cell spanning" not supported
llvm-svn: 336600
This is a maintenance update. Besides many minor changes it ships two
functions "isl_*_list_size" and "isl_*_list_get_at" which will allow us
to simplify the iterator implementation in Polly.
llvm-svn: 336425
Summary: This patch updates the isl interface used in `foldSizeConstantsToRight()` to the new C++ interface.
Reviewers: chelini, grosser, philip.pfaffe, Meinersbur
Reviewed By: grosser
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48965
llvm-svn: 336362
ScalarEvolution::getSCEV dereferences its argument, s.t. passing nullptr
leads to undefined behaviour.
Check for nullptr before calling it instead of checking its argument
afterwards.
llvm-svn: 336350
Summary:
It appears that llvm uses unbuffered C++ streams. So, we should not
mix C and C++ stream operations, because that will give us mixed
up output.
Reviewers: efriedma, jdoerfert, Meinersbur, gareevroman, sebpop, zinob, huihuiz, pollydev, grosser, singam-sanjay, philip.pfaffe
Reviewed By: philip.pfaffe
Subscribers: nemanjai, kbarton
Differential Revision: https://reviews.llvm.org/D40126
llvm-svn: 336288
This change has no impact on upstream Polly directly, but reduces output
noise for some internal isl versions we are testing. In general, storing
simpler and more canonical output is a good idea. Hence, it seems useful
to upstream this change.
llvm-svn: 336281
Summary:
This patch adds <isl_space.h> to gpu_tree.c. This prevents a segfault
when allocating a new isl_space in the function create_sync_domain(), as
the compiler now knows that the return type is a pointer instead of
assuming the function returns an int.
This has been updated in upstream PPCG, so we should bump up our PPCG
version.
Initially discovered by Philip Pfaffe in Polly.
Reviewers: grosser, bollu, philip.pfaffe
Reviewed By: bollu
Subscribers: nemanjai, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D48883
Contributed-by: Alain Denzler <alaindenzler@gmail.com>
llvm-svn: 336251
Summary:
This patch changes the return types for ocl_get_* functions during SPIR code generation. Because these functions return size_t types, the return type needs to be changed to the actual size of size_t on the device.
Based on work by Michal Babej and Pekka Jääskeläinen
Patch by: Alain Denzler
Reviewers: grosser, philip.pfaffe, bollu
Reviewed By: grosser, philip.pfaffe
Subscribers: nemanjai, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D48774
llvm-svn: 336080
Michael Kruse