Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
This patch was previous committed as r266055 as seemed to have caused some spurious
test failures. They did not reappear after further local testing.
llvm-svn: 266301
Differential Revision: http://reviews.llvm.org/D17137
This patch was reverted after the revertion of dependant patch http://reviews.llvm.org/D17068.
There was the problem with test-suite failure.
The problem is hopefully solved with dependant patch so this patch is commited again.
llvm-svn: 266179
Summary:
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
Reviewers: dsanders
Differential Revision: http://reviews.llvm.org/D18856
llvm-svn: 266055
This patch adds support for compact jumps similiar to the previous compact
branch support for MIPSR6. Unlike compact branches, compact jumps do not
have a forbidden slot.
As MipsInstrInfo::getEquivalentCompactForm can determine the correct
expansion for jumps and branches for both microMIPS and MIPSR6, remove the
unnecessary distinction in the delay slot filler.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
llvm-svn: 265390
Summary:
There are too many instructions to exhaustively test so addiu and lwc2 are
used as representative examples.
It should be noted that many memory instructions that should have simm16
range checking do not because it is also necessary to support the macro
of the same name which accepts simm32. The range checks for these occur in
the macro expansion.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18437
llvm-svn: 265019
This reverts commit r262316.
It seems that my change breaks an out-of-tree chromium buildbot, so
I'm reverting this in order to investigate the situation further.
llvm-svn: 262387
Summary:
This patch modifies the existing comparison, branch, conditional-move
and select patterns, and adds new ones where needed. Also, the updated
SLT{u,i,iu} set of instructions generate a GPR width result.
The majority of the code changes in the Mips back-end fix the wrong
assumption that the result of SETCC nodes always produce an i32 value.
The changes in the common code path account for the fact that in 64-bit
MIPS targets, i1 is promoted to i32 instead of i64.
Reviewers: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D10970
llvm-svn: 262316
Summary:
The bug was that the MIPS32R6/MIPS64R6/microMIPS32R6 versions of LSA and DLSA
(unlike the MSA version) failed to account for the off-by-one encoding of the
immediate. The range is actually 1..4 rather than 0..3.
Reviewers: vkalintiris
Subscribers: atanasyan, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14015
llvm-svn: 252295
Summary:
RET, and RET_MM have been replaced by a pseudo named PseudoReturn.
In addition a version with a 64-bit GPR named PseudoReturn64 has been
added.
Instruction selection for a return matches RetRA, which is expanded post
register allocation to PseudoReturn/PseudoReturn64. During MipsAsmPrinter,
this PseudoReturn/PseudoReturn64 are emitted as:
- (JALR64 $zero, $rs) on MIPS64r6
- (JALR $zero, $rs) on MIPS32r6
- (JR_MM $rs) on microMIPS
- (JR $rs) otherwise
On MIPS32r6/MIPS64r6, 'jr $rs' is an alias for 'jalr $zero, $rs'. To aid
development and review (specifically, to ensure all cases of jr are
updated), these aliases are temporarily named 'r6.jr' instead of 'jr'.
A follow up patch will change them back to the correct mnemonic.
Added (JALR $zero, $rs) to MipsNaClELFStreamer's definition of an indirect
jump, and removed it from its definition of a call.
Note: I haven't accounted for MIPS64 in MipsNaClELFStreamer since it's
doesn't appear to account for any MIPS64-specifics.
The return instruction created as part of eh_return expansion is now expanded
using expandRetRA() so we use the right return instruction on MIPS32r6/MIPS64r6
('jalr $zero, $rs').
Also, fixed a misuse of isABI_N64() to detect 64-bit wide registers in
expandEhReturn().
Reviewers: jkolek, vmedic, mseaborn, zoran.jovanovic, dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4268
llvm-svn: 212604
We have detected a documentation bug in the encoding tables of the released
MIPS64r6 specification that has resulted in the wrong encodings being used for
these instructions in LLVM. This commit corrects them.
llvm-svn: 212330
Summary:
There is no change to the restrictions, just the result register is stored
once in the encoding rather than twice. The rt field is zero in
MIPS32r6/MIPS64r6.
Depends on D4119
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4120
llvm-svn: 211019
Summary:
The linked-load, store-conditional operations have been re-encoded such
that have a 9-bit offset instead of the 16-bit offset they have prior to
MIPS32r6/MIPS64r6.
While implementing this, I noticed that the atomic load/store pseudos always
emit a sign extension using sll and sra. I have improved this to use seb/seh
when they are available (MIPS32r2/MIPS64r2 and above).
Depends on D4118
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4119
llvm-svn: 211018
Summary:
It's not emitted by the code generator so we only need assembler tests.
Also added missing daddi aliases from dsub mnemonics, and removed a couple
duplicate dsub tests.
Depends on D4112
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4113
llvm-svn: 210897
Summary:
c.cond.fmt has been replaced by cmp.cond.fmt. Where c.cond.fmt wrote to
dedicated condition registers, cmp.cond.fmt writes 1 or 0 to normal FGR's
(like the GPR comparisons).
mov[fntz] have been replaced by seleqz and selnez. These instructions
conditionally zero a register based on a bool in a GPR. The results can
then be or'd together to act as a select without, for example, requiring a third
register read port.
mov[fntz].[ds] have been replaced with sel.[ds]
MIPS64r6 currently generates unnecessary sign-extensions for most selects.
This is because the result of a SETCC is currently an i32. Bits 32-63 are
undefined in i32 and the behaviour of seleqz/selnez would otherwise depend
on undefined bits. Later, we will fix this by making the result of SETCC an
i64 on MIPS64 targets.
Depends on D3958
Reviewers: jkolek, vmedic, zoran.jovanovic
Reviewed By: vmedic, zoran.jovanovic
Differential Revision: http://reviews.llvm.org/D4003
llvm-svn: 210777
Summary:
The accumulator-based (HI/LO) multiplies and divides from earlier ISA's have
been removed and replaced with GPR-based equivalents. For example:
div $1, $2
mflo $3
is now:
div $3, $1, $2
This patch disables the accumulator-based multiplies and divides for
MIPS32r6/MIPS64r6 and uses the GPR-based equivalents instead.
Renamed expandPseudoDiv to insertDivByZeroTrap to better describe the
behaviour of the function.
MipsDelaySlotFiller now invalidates the liveness information when moving
instructions to the delay slot. Without this, divrem.ll will abort since
%GP ends up used before it is defined.
Reviewers: vmedic, zoran.jovanovic, jkolek
Reviewed By: jkolek
Differential Revision: http://reviews.llvm.org/D3896
llvm-svn: 210760
Summary:
Instead the system is required to provide some means of handling unaligned
load/store without special instructions. Options include full hardware
support, full trap-and-emulate, and hybrids such as hardware support within
a cache line and trap-and-emulate for multi-line accesses.
MipsSETargetLowering::allowsUnalignedMemoryAccesses() has been configured to
assume that unaligned accesses are 'fast' on the basis that I expect few
hardware implementations will opt for pure-software handling of unaligned
accesses. The ones that do handle it purely in software can override this.
mips64-load-store-left-right.ll has been merged into load-store-left-right.ll
The stricter testing revealed a Bits!=Bytes bug in passByValArg(). This has
been fixed and the variables renamed to clarify the units they hold.
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3872
llvm-svn: 209512
Summary:
This required me to implement the disassembler for MIPS64r6 since the encodings
are ambiguous with other instructions. This in turn revealed a few
assembly/disassembly bugs which I have fixed.
* da[ht]i only take two operands according to the spec, not three.
* DecodeBranchTarget2[16] correctly handles wider immediates than simm16
* Also made non-functional change to DecodeBranchTarget and
DecodeBranchTargetMM to keep implementation style consistent between
them.
* Difficult encodings are handled by a custom decode method on the most
general encoding in the group. This method will convert the MCInst to a
different opcode if necessary.
DecodeBranchTarget is not currently the inverse of getBranchTargetOpValue
so disassembling some branch instructions emit incorrect output. This seems
to affect branches with delay slots on all MIPS ISA's. I've left this bug
for now and temporarily removed the check for the immediate on
bc[12]eqz/bc[12]nez in the MIPS32r6/MIPS64r6 tests.
jialc and jic crash the disassembler for some reason. I've left these
instructions commented out for the moment.
Depends on D3760
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3761
llvm-svn: 209415
Summary: The 'mul' line of the test is temporarily commented out because it currently matches the MIPS32 mul instead of the MIPS32r6 mul. This line will be uncommented when we disable the MIPS32 mul on MIPS32r6.
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3668
llvm-svn: 208576
Summary:
Adds MIPS32r6/MIPS64r6 and checks the compatibility requirements for these
processors.
I've also included comments to describe removed and re-encoded instructions,
along with placeholder def's for the new instructions but there are no
functional changes to codegen at this point.
Reviewers: jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3622
llvm-svn: 208399
Zlatko Buljan