Prevent unloading shared libraries on Linux when dlclose() is called.
This is necessary since command-line option parsing API relies on
registering the global option instances in the option parser instance
which can be loaded in a different shared library.
Given that we can't reliably remove those options when a library is
unloaded, the parser ends up containing dangling references. Since glibc
has relatively complex library unloading rules, some of the LLVM
libraries can be unloaded while others (including the Support library)
stay loaded causing quite a mayhem. To reliably prevent that, just
forbid unloading all libraries -- it's a very bad idea anyway.
While the issue arguably happens only with BUILD_SHARED_LIBS, it may
affect any library reusing llvm::cl interface.
Based on patch provided Ross Hayward on https://bugs.gentoo.org/617154.
Previously hit by Fedora back in Feb 2016:
https://lists.freedesktop.org/archives/mesa-dev/2016-February/107242.html
Differential Revision: https://reviews.llvm.org/D40459
llvm-svn: 319069
In recent versions of Solaris 11.4 (previously 12), ld -V output went to
stdout instead of stderr. Since AddLLVM.cmake only expects it on stderr,
Solaris ld wasn't properly detected and options not understood by it are
passed during the build.
The following patch fixes this, allowing for both variants.
Tested on i386-pc-solaris2.11.4 (on top of D35755 which is needed for
proper Solaris support).
Patch by Rainer Orth.
Differential Revision: https://reviews.llvm.org/D39601
llvm-svn: 318532
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
In addition to the current ON and OFF options, this adds the FORCE_ON
option, which causes a configuration error if libxml2 cannot be used.
Differential revision: https://reviews.llvm.org/D40050
llvm-svn: 318209
With this patch, you can now cross-compile for Windows
on non-Windows hosts.
Differential Revision: https://reviews.llvm.org/D39814
This allows cross-compiling for windows on other platforms.
llvm-svn: 317830
- This deprecates LLVM_ENABLE_IR_PGO but keeps it around for now.
- Errors out when LLVM_BUILD_INSTRUMENTED and LLVM_BUILD_INSTRUMENTED_COVERAGE
are both set.
Motivated by bogner's post-commit review of r313770.
llvm-svn: 317725
This was once needed so that multiple tablegen binaries don't compile
the library concurrently. However, this isn't needed anymore since
adding USES_TERMINAL to the custom_command.
This is supported by the fact that the target was only building
LLVMSupport since some cleanups a year ago. If this dependency had
really been needed, we would have seen complaints.
Differential Revision: https://reviews.llvm.org/D39299
llvm-svn: 317695
CMake does a poor job in tracking dependencies on files and directories
directly. Create custom target similar to the configuration step.
On my system, this avoids the reconfiguration on each build.
Differential Revision: https://reviews.llvm.org/D39298
llvm-svn: 317694
This broke the use of libxml2 on machines where iconv() is provided by libc.
I'll follow up on the mailing list to discuss how to fix this properly.
> This is introduced in rL308711.
> Check for c library is incorrect here just because libc will be found always
> and it does not mean that iconv is presented.
>
> Thank to Andrew Krasny for narrowing down the root cause.
>
> Reviewers: ecbeckmann
> Reviewed By: ecbeckmann
> Subscribers: mgorny, llvm-commits
> Differential Revision: https://reviews.llvm.org/D38875
llvm-svn: 317517
`check_linker_flags` currently sets the *compiler* flags (via
`CMAKE_REQUIRED_FLAGS`), and thus implicitly relies on cmake's default
behavior of passing the compiler flags to the linker. This breaks when
cmake's build rules have been altered to not pollute the link line with
compiler flags (which can be desirable for build cleanliness). Instead,
set `CMAKE_EXE_LINKER_FLAGS` explicitly and use `CMP0056` to ensure the
linker flags are passed along. Additionally, since we're inside a
function, we can just alter the variable directly (as the alteration
will be limited to the scope of the function) rather than saving and
restoring the old value.
Differential Revision: https://reviews.llvm.org/D39431
llvm-svn: 316972
check_cxx_compiler_flag doesn't seem to try to link a program, so
the existing code doesn't correctly detect the availability of a given
linker. This patch uses check_cxx_source_compiles instead.
I confirmed that cmake now reports this error
Host compiler does not support '-fuse-ld=foo'
for -DLLVM_USE_LINKER=foo.
Differential Revision: https://reviews.llvm.org/D39274
llvm-svn: 316958
Fix linker not being correctly detected when a custom one is specified
through LLVM_USE_LINKER CMake variable.
In particular,
cmake -DCMAKE_BUILD_TYPE=Release -DLLVM_USE_LINKER=gold ../llvm
resulted into
Linker detection: GNU ld
instead of
Linker detection: GNU Gold
due to the construction not accounting for such variable. It led to the general
confusion and prevented setting linker-specific flags inside functions defined
in AddLLVM.cmake.
Thanks Oleksii Vilchanskyi for the patch!
llvm-svn: 316956
gtest depends on this #define to determine whether it can
use various classes like std::tuple, or whether it has to fall
back to experimental classes in the std::tr1 namespace. The
check in the current version of gtest relies on the value of
the `__cplusplus` macro, but MSVC provides a non-conformant
value of this macro, making it effectively impossible to detect
C++11. In short, LLVM compiled with MSVC has been silently
using the tr1 versions of several classes since the beginning of
time.
This would normally be pretty benign, except that in the latest
preview of MSVC they have marked all of the tr1 classes
deprecated, so it spews thousands of warnings.
llvm-svn: 316798
Original commit message:
"[cmake] Use find_package to discover zlib
This allows us to use standard cmake utilities to point to non-system zlib
locations.
Patch by Oksana Shadura and me (D39002)."
The new patch brings back the old behavior in the cases where find_package
cannot find zlib.
llvm-svn: 316150
This is introduced in rL308711.
Check for c library is incorrect here just because libc will be found always
and it does not mean that iconv is presented.
Thank to Andrew Krasny for narrowing down the root cause.
Reviewers: ecbeckmann
Reviewed By: ecbeckmann
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D38875
llvm-svn: 316064
This allows lld-link to process /manifestinput: flags on macOS too.
Also makes the `REQUIRES: manifesttool` lld tests run on macOS.
Setting LLVM_ENABLE_LIBXML2 to off can suppress this behavior, like on Linux.
llvm-svn: 315873
But now include a check for CPU_COUNT so we still build on 10 year old
versions of glibc.
Original message:
Use sched_getaffinity instead of std:🧵:hardware_concurrency.
The issue with std:🧵:hardware_concurrency is that it forwards
to libc and some implementations (like glibc) don't take thread
affinity into consideration.
With this change a llvm program that can execute in only 2 cores will
use 2 threads, even if the machine has 32 cores.
This makes benchmarking a lot easier, but should also help if someone
doesn't want to use all cores for compilation for example.
llvm-svn: 314931
Summary:
This reverts D38481. The change breaks systems with older versions of glibc. It
injects a use of CPU_COUNT() from sched.h without checking to ensure that the
function exists first.
Reviewers:
Subscribers:
llvm-svn: 314922
The issue with std:🧵:hardware_concurrency is that it forwards
to libc and some implementations (like glibc) don't take thread
affinity into consideration.
With this change a llvm program that can execute in only 2 cores will
use 2 threads, even if the machine has 32 cores.
This makes benchmarking a lot easier, but should also help if someone
doesn't want to use all cores for compilation for example.
llvm-svn: 314809
Summary:
It appears polly makes use of the `CMAKE_RUNTIME_OUTPUT_DIRECTORY` variable
when configuring its lit test suite. Reverting this for now.
llvm-svn: 314551
Summary:
Three `CMAKE_.*_OUTPUT_DIRECTORY` variables used to be set in CMake and
referenced in various other parts of the project. However, in r198205
chapuni added a note to "don't set them anymore", and any remaining
references to them were subsequently removed in r198316 and r199592.
Now that the variables are no longer used anywhere, remove them, along
with the comments advising against using them any longer.
Test Plan:
I ran `check-all` and confirmed the tests built and passed.
Reviewers: beanz, chapuni
Reviewed By: beanz
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D38389
llvm-svn: 314550
Config map is not exposed through the command line, so testing this
is somewhat tricky. But basically we need a test that if a custom
driver builds a config map and passes it to main, it gets respected.
A config map allows config files in the source tree to be mapped
to alternate config files in the build tree. This particular test
works by having two config files in separate directories, and
setting up a config map to have that redirects A/lit.site.cfg
to B/altconfig. Then, we print a message in A/lit.site.cfg
and B/altconfig and check that we do see the output from B
but don't see the output from A. Additionally we test that
the test suite specified by A's config map is properly discovered.
Differential Revision: https://reviews.llvm.org/D38105
llvm-svn: 313887
Many editors and Python-related diagnostics tools such as
debuggers break or fail in mysterious ways when python files
don't end in .py. This is especially true on Windows, but
still exists on other platforms. I don't want to be too heavy
handed in changing everything across the board, but I do want
to at least *allow* lit configs to have .py extensions. This
patch makes the discovery process first look for a config file
with a .py extension, and if one is not found, then looks for
a config file using the old method. So for existing users, there
should be no functional change.
Differential Revision: https://reviews.llvm.org/D37838
llvm-svn: 313849
This adds an LLVM_ENABLE_IR_PGO option to enable building llvm and its
tools with IR PGO instrumentation.
Usage: -DLLVM_BUILD_INSTRUMENTED=On -DLLVM_ENABLE_IR_PGO=On (both
options must be enabled)
Differential Revision: https://reviews.llvm.org/D38066
llvm-svn: 313770
Despite a strong CMake warning that this is an unsupported
libcxx build configuration, some bots still rely on being
able to check out lit and libcxx independently with no
LLVM sources, and then run lit against libcxx.
A previous patch broke that workflow, so this is making it work
again. Unfortunately, it breaks generation of the llvm-lit
script for libcxx, but we will just have to live with that until
a solution is found that allows libcxx to make more use of
llvm build pieces. libcxx can still run tests by using the
ninja check target, or by running lit.py directly against the
build tree or source tree.
Differential Revision: https://reviews.llvm.org/D38057
llvm-svn: 313763
The motivation is to be able to check sources outside the current
directory. See D31363 for example usage.
Differential Revision: https://reviews.llvm.org/D37859
llvm-svn: 313648
After speaking with the libcxx owners, they agreed that this is
a bug in the bot that needs to be fixed by the bot owners, and
the CMake changes are correct.
llvm-svn: 313643
This reverts commit 4ad71811d45268d81b60f27e3b8b2bcbc23bd7b9.
There is a bot that is checking out libcxx and lit with nothing
else and then running lit.py against the test tree. Since there's
no LLVM source tree, there's no LLVM CMake. CMake actually
reports this as a warning saying unsupported libcxx configuration,
but I guess someone is depending on it anyway.
llvm-svn: 313607
It looks like this is going to be non-trivial to get working
in both Py2 and Py3, so for now I'm reverting until I have time
to fully test it under Python 3.
llvm-svn: 313429
This is a resubmission of r313270. It broke standalone builds of
compiler-rt because we were not correctly generating the llvm-lit
script in the standalone build directory.
The fixes incorporated here attempt to find llvm/utils/llvm-lit
from the source tree returned by llvm-config. If present, it
will generate llvm-lit into the output directory. Regardless,
the user can specify -DLLVM_EXTERNAL_LIT to point to a specific
lit.py on their file system. This supports the use case of
someone installing lit via a package manager. If it cannot find
a source tree, and -DLLVM_EXTERNAL_LIT is either unspecified or
invalid, then we print a warning that tests will not be able
to run.
Differential Revision: https://reviews.llvm.org/D37756
llvm-svn: 313407
This patch is still breaking several multi-stage compiler-rt bots.
I already know what the fix is, but I want to get the bots green
for now and then try re-applying in the morning.
llvm-svn: 313335
To further reduce duplicate code, this patch introduces a module
that configs can simply import and get access to a lot of useful
functionality such as setting up paths, adding features that are
useful across all projects, and other utility-type functions.
For now this only updates llvm's suite to use this new library,
but subsequent patches will update other projects.
Differential Revision: https://reviews.llvm.org/D37778
llvm-svn: 313325
This patch simplifies LLVM's lit infrastructure by enforcing an ordering
that a site config is always run before a source-tree config.
A significant amount of the complexity from lit config files arises from
the fact that inside of a source-tree config file, we don't yet know if
the site config has been run. However it is *always* required to run
a site config first, because it passes various variables down through
CMake that the main config depends on. As a result, every config
file has to do a bunch of magic to try to reverse-engineer the location
of the site config file if they detect (heuristically) that the site
config file has not yet been run.
This patch solves the problem by emitting a mapping from source tree
config file to binary tree site config file in llvm-lit.py. Then, during
discovery when we find a config file, we check to see if we have a
target mapping for it, and if so we use that instead.
This mechanism is generic enough that it does not affect external users
of lit. They will just not have a config mapping defined, and everything
will work as normal.
On the other hand, for us it allows us to make many simplifications:
* We are guaranteed that a site config will be executed first
* Inside of a main config, we no longer have to assume that attributes
might not be present and use getattr everywhere.
* We no longer have to pass parameters such as --param llvm_site_config=<path>
on the command line.
* It is future-proof, meaning you don't have to edit llvm-lit.in to add
support for new projects.
* All of the duplicated logic of trying various fallback mechanisms of
finding a site config from the main config are now gone.
One potentially noteworthy thing that was required to implement this
change is that whereas the ninja check targets previously used the first
method to spawn lit, they now use the second. In particular, you can no
longer run lit.py against the source tree while specifying the various
`foo_site_config=<path>` parameters. Instead, you need to run
llvm-lit.py.
Differential Revision: https://reviews.llvm.org/D37756
llvm-svn: 313270
This was intended to be a generic CMake solution to a problem
shared across several projects. It turns out it doesn't interact
very well certain CMake configurations, and furthermore the
"problem" is actually not a problem, as the problematic code
is never executed to begin with. So this really isn't solving
anything.
llvm-svn: 313191
Some projects need to add conditional dependencies on other projects.
compiler-rt is already doing this, and I attempted to add this to
debuginfo-tests when I ran into the ordering problem, that you can't
conditionally add a dependency unless that dependency's CMakeLists.txt
has already been run (which would allow you to say if (TARGET foo).
The solution to this seems to be to determine very early on the entire
set of projects which is enabled. This is complicated by the fact that
there are multiple ways to enable projects, and different tree layouts
(e.g. mono-repo, out of -tree, external, etc). This patch attempts to
centralize all of this into one place, and then updates compiler-rt to
demonstrate as a proof of concept how this can simplify code.
Differential Revision: https://reviews.llvm.org/D37637
llvm-svn: 313091
Summary:
When repo is used with git, 'clang --version' option does not display
the correct revision information (i.e. git hash on TOP) as the following:
clang version 6.0.0 --->
clang version 6.0.0 (clang version) (llvm version)
This is because repo also creates .git/svn folder as git-svn does and
this makes repo with git uses "git svn info" command, which is only for
git-svn, to retrieve its revision information, making null for the info.
To correctly distinguish between git-svn and repo with git, the folder
hierarchy to specify for git-svn should be .git/svn/refs as the "git svn
info" command depends on the revision data in .git/svn/refs. This patch
in turn makes repo with git passes through to the third macro,
get_source_info_git, in get_source_info function, resulting in correctly
retrieving the revision information for repo with git using "git log ..."
command.
This patch is tested with git, svn, git-svn, and repo with git.
Reviewers: llvm-commits, probinson, rnk
Reviewed By: rnk
Subscribers: rnk, mehdi_amini, beanz, mgorny
Differential Revision: https://reviews.llvm.org/D35532
llvm-svn: 312864
FuzzMutate might not be the best place for these, but it makes more
sense than an entirely new library for now. This will make setting up
fuzz targets with consistent CLI handling easier.
llvm-svn: 312425
Summary:
Move version control macros, find_first_existing_file and
find_first_existing_vc_file to AddLLVM.cmake so they can be reused by sub projects
like clang.
Differential Revision: https://reviews.llvm.org/D36971
llvm-svn: 312419
This is needed for building LLVM on Android with new NDK (newer
than r15c) and API level < 24. Android C library (Bionic) didn't have
support for 64 bit file position until Android N.
Differential Revision: https://reviews.llvm.org/D37314
llvm-svn: 312389
This adds a dummy main so we can build and run the llvm-isel-fuzzer
functionality when we aren't building LLVM with coverage. The approach
here should serve as a template to stop in-tree fuzzers from
bitrotting (See llvm.org/pr34314).
Note that I'll probably move most of the logic in DummyISelFuzzer's
`main` to a library so it's easy to reuse it in other fuzz targets,
but I'm planning on doing that in a follow up that also consolidates
argument handling in our LLVMFuzzerInitialize implementations.
llvm-svn: 312338
The buildbots have shown that -Wstrict-prototypes behaves differently in GCC
and Clang so we should keep it disabled until Clang follows GCC's behaviour
llvm-svn: 312246
Clang 5 supports -Wstrict-prototypes. We should use it to catch any C
declarations that declare a non-prototype function.
rdar://33705313
Differential Revision: https://reviews.llvm.org/D36669
llvm-svn: 312240
This moves the cmake configuration for fuzzers in LLVM to a new macro,
add_llvm_fuzzer. This will make it easier to keep things consistent
while implementing llvm.org/pr34314.
I've also made a couple of minor functional changes here:
- the fuzzers now use add_llvm_executable rather than add_llvm_tool.
This means they won't create install targets and stuff like that,
because those made little sense for these fuzzers.
- I've grouped these under "Fuzzers" rather than in with "Tools" for
people who build with IDEs.
llvm-svn: 312200
Summary:
Plugins can (and should) be enabled under mingw if we are building
libLLVM.dll, so this is just a missed case. This allows LLVMgold.dll to
be built now under mingw.
Reviewers: llvm-commits, pirama, beanz, chapuni
Reviewed By: chapuni
Subscribers: chapuni, mgorny
Differential Revision: https://reviews.llvm.org/D37116
llvm-svn: 311973
This fixes an issue with the use of LLVM_PARALLEL_LINK_JOBS.
Original commit message:
macOS 10.13 added a new API (futimens). This API is only available on macOS 10.13
and later, but the cmake check we have in place only tests if the symbol is
present and ignores the availability attribute. Luckily we have new warning for
this and by making this warning an error the cmake check will return the correct
result.
See also rdar://problem/33992750.
Differential Revision: https://reviews.llvm.org/D37027
llvm-svn: 311965
macOS 10.13 added a new API (futimens). This API is only available on macOS 10.13
and later, but the cmake check we have in place only tests if the symbol is
present and ignores the availability attribute. Luckily we have new warning for
this and by making this warning an error the cmake check will return the correct
result.
See also rdar://problem/33992750.
Differential Revision: https://reviews.llvm.org/D37027
llvm-svn: 311949
Summary:
The `LLVM${c}Info` mask is listed twice in LLVM-Config.cmake. This results in the libraries such as LLVMARMInfo, LLVMAArch4Info, etc appearing twice in `extract_symbols.py` command line while building `clangShared`. `Extract_symbols.py` does not work well in such a case and completely ignores the symbols from the duplicated libraries. Thus, the LLVM(...)Info symbols do not get exported from `clangShared` and linking clang against it fails with unresolved dependencies.
Seems to be a mere copy-paste mistake.
Reviewers: beanz, chapuni
Reviewed By: chapuni
Subscribers: chapuni, aemerson, mgorny, kristof.beyls, llvm-commits, asl
Differential Revision: https://reviews.llvm.org/D36119
llvm-svn: 310590
Detect [/-][DU]NDEBUG in CMAKE_C_FLAGS* and pass them through to ocamlc.
This is necessary because their value might affect visibility of dump
functions in LLVM and ocamlc uses its own compiler and flags by default.
Differential Revision: https://reviews.llvm.org/D35898
llvm-svn: 309483
Install the OCaml dynamic libraries in the 'stubdirs' directory rather
than the llvm subdirectory in order to fix running executables created
by ocamlc. Otherwise, the executables fail to run being unable to locate
the libraries (unless the LLVM directory is explicitly added to
LD_LIBRARY_PATH).
The staging directories are not altered since they work for our
development setup anyway, and installing into two directories would
unnecessarily make the code more complex.
Differential Revision: https://reviews.llvm.org/D35995
llvm-svn: 309481
By creating a dummy of this target in LLVMConfig.cmake, projects that can build against out-of-tree LLVM can freely depend on the target without needing to have conditionals for if LLVM is in-tree or out-of-tree.
llvm-svn: 309389
Pass the values of CMAKE_C_FLAGS and CMAKE_C_FLAGS_${CMAKE_BUILD_TYPE}
as -ccopt to ocamlc. This enforces the specific flags used for the LLVM
build to be used for OCaml bindings as well, notably -O and -march
flags.
This also solves the issue of the user being unable to force specific
flags for OCaml bindings builds. Gentoo needs this to enforce -DNDEBUG
consistently between the LLVM build and the split OCaml bindings build.
Differential Revision: https://reviews.llvm.org/D35898
llvm-svn: 309320
-Werror may cause some of the CMake checks to fail, so we disable
it even if it's enabled for the build itself.
Differential Revision: https://reviews.llvm.org/D35924
llvm-svn: 309235
Reapply "Set a different var for checking I686, because LLVM_NATIVE_ARCH is"
This reverts commit e7400d7cbc2b7539de3aa7a20adc8f4ee0cb7bef.
llvm-svn: 309181
compile_commands.json file is very useful both for tooling and for
reproducible builds.
For files generated from recursive CMake invocation this information was
not previously generated.
Differential Review: https://reviews.llvm.org/D35219
llvm-svn: 308698
Summary: Implement parsing and writing of a single xml manifest file.
Subscribers: mgorny, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D35425
llvm-svn: 308679
Summary:
GetSVN.cmake currently takes one or two pairs of <source directory path,
name>, then attempts to get the remote repository URL and source control
revision of the repositories at those one or two paths.
It takes two pairs in order for Clang to get the revision of both
itself, and its dependency LLVM.
For projects that rely upon both LLVM and Clang (Apple's Swift is one
example, but there are others), GetSVN.cmake is used to fetch *three*
revisions: Swift, Clang, and LLVM.
To support this use case, change GetSVN.cmake: instead of taking one or
two pairs (specified via `FIRST_SOURCE_DIR`/`FIRST_NAME`, have it take a list
of pairs (`SOURCE_DIRS`/`NAMES`).
In order to allow Clang to migrate, have GetSVN.cmake support both sets
of arguments for now. The old arguments can be removed once Clang begins
using the new arguments, and Swift can follow when it updates its
copy of LLVM.
Test Plan:
1. Perform a clean build of Clang, verify that `clang --version` still
prints the correct LLVM and Clang revision information.
2. Modify Clang's CMake to use the new arguments, then perform another
clean build. `clang --version` should still print the correct
revision information.
Reviewers: jordan_rose, beanz, probinson
Subscribers: echristo, chapuni, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D35132
llvm-svn: 308507
Solaris ld is not the only linker available on Solaris.
Introducing linker detection and using LLVM_LINKER_IS_SOLARISLD to
select Solaris-ld specific handling.
Patch by: Fedor Sergeev
Differential Revision: https://reviews.llvm.org/D35325
llvm-svn: 307852
Solaris ld interprets -color-diagnostics as a -c option, so it is
better to use --color-diagnostics instead. lld accepts both.
Differential Revision: https://reviews.llvm.org/D35327
llvm-svn: 307850
This changes adds support for building runtimes for multiple
different targets using LLVM runtimes directory.
The implementation follow the model used already by the builtins
build which already supports this option. To specify the runtimes
targets to be built, use the LLVM_RUNTIME_TARGETS variable, where
the valuae is the list of targets to build runtimes for. To pass
a per target variable to the runtimes build, you can set
RUNTIMES_<target>_<variable> where <variable> will be passed to the
runtimes build for <target>.
Each runtime target (except for the default one) will be installed
into lib/<target> subdirectory. Build targets will be suffixed with
the target name.
Differential Revision: https://reviews.llvm.org/D32816
llvm-svn: 307731
Summary:
This is like the LLVM_TOOLS_INSTALL_DIR option, but for the utils
that are installed when the LLVM_INSTALL_UTILS. This option
defaults to 'bin' to remain consistent with the current behavior, but
distros may want to install these to libexec/llvm.
Reviewers: beanz
Reviewed By: beanz
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30655
llvm-svn: 307150
CMake emits build targets as relative paths (from build.ninja) but Ninja doesn't identify absolute path (in *.d) as relative path (in build.ninja).
So, let file names, in the command line, relative from ${CMAKE_BINARY_DIR}, where build.ninja is.
Note that tblgen is executed on ${CMAKE_BINARY_DIR} as working directory.
Differential Revision: https://reviews.llvm.org/D33707
llvm-svn: 305961
This commit causes LLVM_USE_SANITIZER to now accept the "Leaks" option. This
will cause cmake to pass in -fsanitize=leak in all of the appropriate places.
I am making this change so that I can setup a linux bot that only detects
leaks.
llvm-svn: 305839
No behavior is changed if LLVM_TARGET_TRIPLE_ENV is blank or undefined.
If LLVM_TARGET_TRIPLE_ENV is "TEST_TARGET_TRIPLE" and $TEST_TARGET_TRIPLE is not blank,
llvm::sys::getDefaultTargetTriple() returns $TEST_TARGET_TRIPLE.
Lit resets config.target_triple and config.environment[LLVM_TARGET_TRIPLE_ENV] to change the default target.
Without changing LLVM_DEFAULT_TARGET_TRIPLE nor rebuilding, lit can be run;
TEST_TARGET_TRIPLE=i686-pc-win32 bin/llvm-lit -sv path/to/test/
TEST_TARGET_TRIPLE=i686-pc-win32 ninja check-clang-tools
Differential Revision: https://reviews.llvm.org/D33662
llvm-svn: 305632
LLVM_TABLEGEN_TARGET is undefined in clang standalone build.
STREQUAL cannot omit LHS. Then I saw an error;
CMake Error at /path/to/install/llvm/lib/cmake/llvm/TableGen.cmake:40 (if):
if given arguments:
"STREQUAL" "/path/to/install/llvm/bin/llvm-tblgen.exe"
Unknown arguments specified
llvm-svn: 305159
For the case when LLVM_OPTIMIZED_TABLEGEN is ON (enables LLVM_USE_HOST_TOOLS),
we need both _TABLEGEN_TARGET and _TABLEGEN_EXE in the DEPENDS list
to have .inc files rebuilt on a tablegen change, as cmake does not propagate
file-level dependencies of custom targets.
We could always have just one dependency on both the target and
the file, but the 2 cases would produce cleaner cmake files.
llvm-svn: 305142
Summary:
Reverse iteration can be turned on, by default, by setting -DLLVM_REVERSE_ITERATION:BOOL=ON during cmake.
With this enabled, we can uncover lots of cases of non-determinism in codegen by simply running our tests (without any other change).
We can then setup a buildbot which will have this turned on by default. Initially, a lot of unit tests will fail in this configuration.
Once we start fixing non-determinism issues, we can gradually make this a blocker for patches.
Reviewers: davide, dblaikie, mehdi_amini, dberlin
Reviewed By: dblaikie
Subscribers: probinson, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D33908
llvm-svn: 304757
Summary:
This was broken by r302499. Configuring with -DLLVM_BUILD_DOCS=ON would
cause the docs-llvm-man target not to be created.
Reviewers: anemet, beanz
Reviewed By: anemet
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33146
llvm-svn: 303042
Summary:
When using ThinLTO, the linker performs its own parallelism. This
change limits the number of parallel link jobs that Ninja will issue
to keep the total number of threads reasonable when linking with
ThinLTO.
Reviewers: hans, ruiu
Subscribers: mgorny, mehdi_amini, Prazek
Differential Revision: https://reviews.llvm.org/D31990
llvm-svn: 301676
Summary:
This patch adds a very simple linker script to version the lib's symbols
and thus trying to avoid crashes if an application loads two different
LLVM versions (as long as they do not share data between them).
Note that we deliberately *don't* make LLVM_5.0 depend on LLVM_4.0:
they're incompatible and the whole point of this patch is
to tell the linker that.
Avoid unexpected crashes when two LLVM versions are used in the same process.
Author: Rebecca N. Palmer <rebecca_palmer@zoho.com>
Author: Lisandro Damían Nicanor Pérez Meyer <lisandro@debian.org>
Author: Sylvestre Ledru <sylvestre@debian.org>
Bug-Debian: https://bugs.debian.org/848368
Reviewers: beanz, rnk
Reviewed By: rnk
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D31524
llvm-svn: 300496
This is a magic header file supported by the build system that provides a
single definition, LLVM_REVISION, containing an LLVM revision identifier,
if available. This functionality previously lived in the LTO library, but
I am moving it out to lib/Support because I want to also start using it in
lib/Object to create the IR symbol table.
This change also fixes a bug where LLVM_REVISION was never actually being
used in lib/LTO because the macro HAS_LLVM_REVISION was never defined (it
was misspelled as HAVE_SVN_VERSION_INC in lib/LTO/CMakeLists.txt, and was
only being defined in a non-existent file Version.cpp).
I also changed the code to use "git rev-parse --git-dir" to locate the .git
directory, instead of looking for it in the LLVM source root directory,
which makes this compatible with monorepos as well as git worktrees.
Differential Revision: https://reviews.llvm.org/D31985
llvm-svn: 300160
On FreeBSD backtrace is not part of libc and depends on libexecinfo
being available. Instead of using manual checks we can use the builtin
CMake module FindBacktrace.cmake to detect availability of backtrace()
in a portable way.
Patch By: Alex Richardson
Differential Revision: https://reviews.llvm.org/D27143
llvm-svn: 300062
CMake variable LLVM_DEFINITIONS collects preprocessor definitions provided
for host compiler that builds llvm components. A function
add_llvm_definitions was introduced in AddLLVMDefinitions.cmake to keep
track of these definitions and was intended to be a replacement for CMake
command add_definitions. Actually in many cases add_definitions is still
used and the content of LLVM_DEFINITIONS is not actual now. On the other
hand the current version of CMake allows getting set of definitions in a
more convenient way. This fix implements evaluation of the variable by
reading corresponding cmake property.
Differential Revision: https://reviews.llvm.org/D31125
llvm-svn: 298336
Summary:
clang-cl understands the GCC-style -W[no-]foo flags, and for the most
part ignores MSVC -wd flags. So, let's pass the curated set of warning
flags we use on Unix on Windows. We can also stop passing /W4 -wd*,
which for the most part corresponds to -Wall -Wextra with a bunch of
flags that we mostly ignore.
I had to disable -Wnon-virtual-dtor on Windows, because it fires on
every COM class ever. I filed PR32286 to fix this.
So far I've only found two instances of -Wstring-conversion in the
WinASan code, which I'll fix. Other than that we seem clean.
Reviewers: hans
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D30992
llvm-svn: 297964
When CMAKE_INSTALL_MANDIR isn't defined it ends up attempting to install
the man pages under "/man1" and we really don't want to accidentally install
stuff at the filesystem root.
llvm-svn: 297545
Summary:
The add_tablegen macros defines its own install target, and it was also calling
add_llvm_utility which adds another install target.
Configuring with -DLLVM_TOOLS_INSTALL_DIR set to something other than
'bin' along with -DLLVM_INSTALL_UTILS=ON was causing llvm-tablgen
to be installed to two separate directories.
Reviewers: beanz, hans
Reviewed By: beanz
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30656
llvm-svn: 297403
X86EvexToVex machine instruction pass compresses EVEX encoded instructions by replacing them with their identical VEX encoded instructions when possible.
It uses manually supported 2 large tables that map the EVEX instructions to their VEX ideticals.
This TableGen backend replaces the tables by automatically generating them.
Differential Revision: https://reviews.llvm.org/D30451
llvm-svn: 297127
Summary:
Fix a few problems in VersionFromVCS.cmake to make it more reliable:
- Stop using git svn info to retrieve the svn revision. I am unable to
determine what the svn revision returned by this command means.
During my testing this command returned a revision from a month
ago which was not the HEAD of any of my local branches.
Also, this revision was never actually added to the version string due
to a typo in the script. All it was used for was to reject the
revision number returned by git svn find-rev HEAD when the revision
numbers didn't match.
- Populate GIT_COMMIT even when we detect a git repo without any
svn information.
Reviewers: mehdi_amini, beanz
Reviewed By: beanz
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D30092
llvm-svn: 296829
Summary: With clang-cl gaining support for link-time optimization, we can now enable builds using LTO when using clang-cl and lld on Windows. To do this, we must not pass the -flto flag to the linker; lld-link does not understand it, but will perform LTO automatically when it encounters bitcode files. We also don't pass /Brepro when using LTO - the compiler doesn't generate object files for LTO, so passing the flag would only result in a warning about it being unused.
Reviewers: rnk, ruiu, hans
Reviewed By: hans
Subscribers: mgorny, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30240
llvm-svn: 296658
The function for distinguishing local and remote files added in r295768
unconditionally uses linux/magic.h header to provide necessary
filesystem magic numbers. However, in kernel headers predating 2.6.18
the magic numbers are spread throughout multiple include files.
Furthermore, LLVM did not require kernel headers being installed so far.
To increase the portability across different versions of Linux kernel
and different Linux systems, add CMake header checks for linux/magic.h
and -- if it is missing -- the linux/nfs_fs.h and linux/smb.h headers
which contained the numbers previously.
Furthermore, since the numbers are static and the feature does not seem
critical enough to make LLVM require kernel headers at all, add fallback
constants for the case when none of the necessary headers is available.
Differential Revision: https://reviews.llvm.org/D30261
llvm-svn: 295854
This is useful for some edge cases where detecting things gets tricky. Specifically LLDB needs this to support iOS because CMake doesn't support running tests using obj-c code.
llvm-svn: 295392
To help assist in debugging ISEL or to prioritize GlobalISel backend
work, this patch adds two more tables to <Target>GenISelDAGISel.inc -
one which contains the patterns that are used during selection and the
other containing include source location of the patterns
Enabled through CMake varialbe LLVM_ENABLE_DAGISEL_COV
llvm-svn: 295081
This was previously searched in CMakeLists.txt unconditionally but as of
r294371 it is only searched in some circumstances. Repeating the search
in config-ix.cmake to make this robust and hopefully fix the macOS
Asan+Ubsan jenkins build.
llvm-svn: 294811
LLVM defines `PTHREAD_LIB` which is used by AddLLVM.cmake and various projects
to correctly link the threading library when needed. Unfortunately
`PTHREAD_LIB` is defined by LLVM's `config-ix.cmake` file which isn't installed
and therefore can't be used when configuring out-of-tree builds. This causes
such builds to fail since `pthread` isn't being correctly linked.
This patch attempts to fix that problem by renaming and exporting
`LLVM_PTHREAD_LIB` as part of`LLVMConfig.cmake`. I renamed `PTHREAD_LIB`
because It seemed likely to cause collisions with downstream users of
`LLVMConfig.cmake`.
llvm-svn: 294690
Summary: This patch is required by D28855, and enables us to rely on CMake's ability to handle out of order target dependencies.
Reviewers: mgorny, chapuni, bryant
Subscribers: llvm-commits, jgosnell
Differential Revision: https://reviews.llvm.org/D28869
llvm-svn: 294514
Summary:
r291918 changed `HandleLLVMOptions.cmake` to add `-fsanitize-blacklist=<llvm-file>` when `LLVM_USE_SANITIZER=Undefined` is specified. This breaks out-of-tree users of `LLVM_USE_SANITIZER` since that file is not present.
This patch fixes the issue by checking if the file exists first.
Reviewers: mgorny, bogner, vitalybuka, krasin
Reviewed By: krasin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29686
llvm-svn: 294367
Moving the Ninja job pool configuration settings into the HandleLLVMOptions module will allow standalone builds of LLVM sub-projects to use the LLVM options without needing to re-implement them.
llvm-svn: 294334
Committing after fixing suggested changes and tested release/debug builds on
x86_64-linux and arm/aarch64 builds.
Differential revision: https://reviews.llvm.org/D29042
llvm-svn: 293850
Summary: This adds a fallback in case that the Intel compiler is failed to be detected correctly.
Reviewers: chapuni
Reviewed By: chapuni
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D27610
llvm-svn: 293230
In r292256, we started adding -fsanitize-use-after-scope when using
the address sanitizer, but that flag wasn't always available. This
fixes the config to only add the flag if the host compiler supports
it.
llvm-svn: 292423
Update SOVERSION to use just the major version number rather than
major+minor, to match the new versioning scheme where only major is used
to indicate API/ABI version.
Since two-digit SOVERSIONs were introduced post 3.9 branching, this
change does not risk any SOVERSION collisions. In the past,
two-component X.Y SOVERSIONs were shortly used but those will not
interfere with the new ones since the new versions start at 4.
Differential Revision: https://reviews.llvm.org/D28730
llvm-svn: 292255
Summary:
This string parameter is passed to -fuse-ld when linking. It can be
an absolute path to your custom linker, otherwise clang will look for
`ld.{name}`.
Reviewers: davide, tejohnson, pcc
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D28738
llvm-svn: 292047
Summary:
libstdc++ has some undefined behavior in bits/stl_tree.h that
has recently became excercised by some of the LLVM code.
Given that fixing libstdc++ will take years, adding the file
into a blacklist to fix bots seems like a necessity.
Reviewers: vitalybuka
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D28686
llvm-svn: 291918
Adam Nemet