The __finally emission block tries to be clever by removing unused continuation
edges if there's an unconditional jump out of the __finally block. With
exception edges, the EH continuation edge isn't always unused though and we'd
crash in a few places.
Just don't be clever. That makes the IR for __finally blocks a bit longer in
some cases (hence small and behavior-preserving changes to existing tests), but
it makes no difference in general and it fixes the last crash from PR22553.
http://reviews.llvm.org/D7918
llvm-svn: 230697
Original CL description:
Produce less broken basic block sequences for __finally blocks.
The way cleanups (such as PerformSEHFinally) get emitted is that codegen
generates some initialization code, then calls the cleanup's Emit() with the
insertion point set to a good place, then the cleanup is supposed to emit its
stuff, and then codegen might tack in a jump or similar to where the insertion
point is after the cleanup.
The PerformSEHFinally cleanup tries to just stash away the block it's supposed
to codegen into, and then does codegen later, into that stashed block. However,
after codegen'ing the __finally block, it used to set the insertion point to
the finally's continuation block (where the __finally cleanup goes when its body
is completed after regular, non-exceptional control flow). That's not correct,
as that block can (and generally does) already ends in a jump. Instead,
remember the insertion point that was current before the __finally got emitted,
and restore that.
Fixes two of the crashes in PR22553.
llvm-svn: 230503
The way cleanups (such as PerformSEHFinally) get emitted is that codegen
generates some initialization code, then calls the cleanup's Emit() with the
insertion point set to a good place, then the cleanup is supposed to emit its
stuff, and then codegen might tack in a jump or similar to where the insertion
point is after the cleanup.
The PerformSEHFinally cleanup tries to just stash away the block it's supposed
to codegen into, and then does codegen later, into that stashed block. However,
after codegen'ing the __finally block, it used to set the insertion point to
the finally's continuation block (where the __finally cleanup goes when its body
is completed after regular, non-exceptional control flow). That's not correct,
as that block can (and generally does) already ends in a jump. Instead,
remember the insertion point that was current before the __finally got emitted,
and restore that.
Fixes two of the crashes in PR22553.
llvm-svn: 230460
After r228258, Clang started emitting C++ EH IR that LLVM wasn't ready
to deal with, even when exceptions were disabled with /EHs-. This time,
make /EHs- turn off -fexceptions while still emitting exceptional
constructs in functions using __try. Since Sema rejects C++ exception
handling constructs before CodeGen, landingpads should only appear in
such functions as the result of a __try.
llvm-svn: 228329
It caused a chromium base unittest that tests throwing and catching SEH
exceptions to fail (http://crbug.com/455488) and I suspect it might also
be the cause of the chromium clang win 64-bit shared release builder timing
out during compiles. So revert to see if that's true.
llvm-svn: 228262
Previously we would simply double-emit the body of the __finally block,
but that doesn't work when it contains any kind of Decl, which we can't
double emit.
This fixes that by emitting the block once and branching into a shared
code region and then branching back out.
llvm-svn: 228222
There are four major kinds of declarations that cause code generation:
- FunctionDecl (includes CXXMethodDecl etc)
- ObjCMethodDecl
- BlockDecl
- CapturedDecl
This patch tracks __try usage on FunctionDecls and diagnoses __try usage
in other decls. If someone wants to use __try from ObjC, they can use it
from a free function, since the ObjC code will need an ObjC-style EH
personality.
Eventually we will want to look through CapturedDecls and track SEH
usage on the parent FunctionDecl, if present.
llvm-svn: 228058
distinction between the different use-cases. With the previous default
behavior we would occasionally emit empty debug locations in situations
where they actually were strictly required (= on invoke insns).
We now have a choice between defaulting to an empty location or an
artificial location.
Specifically, this fixes a bug caused by a missing debug location when
emitting C++ EH cleanup blocks from within an artificial function, such as
an ObjC destroy helper function.
rdar://problem/19670595
llvm-svn: 228003
The lowering looks a lot like normal EH lowering, with the exception
that the exceptions are caught by executing filter expression code
instead of matching typeinfo globals. The filter expressions are
outlined into functions which are used in landingpad clauses where
typeinfo would normally go.
Major aspects that still need work:
- Non-call exceptions in __try bodies won't work yet. The plan is to
outline the __try block in the frontend to keep things simple.
- Filter expressions cannot use local variables until capturing is
implemented.
- __finally blocks will not run after exceptions. Fixing this requires
work in the LLVM SEH preparation pass.
The IR lowering looks like this:
// C code:
bool safe_div(int n, int d, int *r) {
__try {
*r = normal_div(n, d);
} __except(_exception_code() == EXCEPTION_INT_DIVIDE_BY_ZERO) {
return false;
}
return true;
}
; LLVM IR:
define i32 @filter(i8* %e, i8* %fp) {
%ehptrs = bitcast i8* %e to i32**
%ehrec = load i32** %ehptrs
%code = load i32* %ehrec
%matches = icmp eq i32 %code, i32 u0xC0000094
%matches.i32 = zext i1 %matches to i32
ret i32 %matches.i32
}
define i1 zeroext @safe_div(i32 %n, i32 %d, i32* %r) {
%rr = invoke i32 @normal_div(i32 %n, i32 %d)
to label %normal unwind to label %lpad
normal:
store i32 %rr, i32* %r
ret i1 1
lpad:
%ehvals = landingpad {i8*, i32} personality i32 (...)* @__C_specific_handler
catch i8* bitcast (i32 (i8*, i8*)* @filter to i8*)
%ehptr = extractvalue {i8*, i32} %ehvals, i32 0
%sel = extractvalue {i8*, i32} %ehvals, i32 1
%filter_sel = call i32 @llvm.eh.seh.typeid.for(i8* bitcast (i32 (i8*, i8*)* @filter to i8*))
%matches = icmp eq i32 %sel, %filter_sel
br i1 %matches, label %eh.except, label %eh.resume
eh.except:
ret i1 false
eh.resume:
resume
}
Reviewers: rjmccall, rsmith, majnemer
Differential Revision: http://reviews.llvm.org/D5607
llvm-svn: 226760
Sorry for the noise, I managed to miss a bunch of recent regressions of
include orderings here. This should actually sort all the includes for
Clang. Again, no functionality changed, this is just a mechanical
cleanup that I try to run periodically to keep the #include lines as
regular as possible across the project.
llvm-svn: 225979
Several pieces of code were relying on implicit debug location setting
which usually lead to incorrect line information anyway. So I've fixed
those (in r225955 and r225845) separately which should pave the way for
this commit to be cleanly reapplied.
The reason these implicit dependencies resulted in crashes with this
patch is that the debug location would no longer implicitly leak from
one place to another, but be set back to invalid. Once a call with
no/invalid location was emitted, if that call was ever inlined it could
produce invalid debugloc chains and assert during LLVM's codegen.
There may be further cases of such bugs in this patch - they're hard to
flush out with regression testing, so I'll keep an eye out for reports
and investigate/fix them ASAP if they come up.
Original commit message:
Reapply "DebugInfo: Generalize debug info location handling"
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225956
This reverts commit r225000, r225021, r225083, r225086, r225090.
The root change (r225000) still has several issues where it's caused
calls to be emitted without debug locations. This causes assertion
failures if/when those calls are inlined.
I'll work up some test cases and fixes before recommitting this.
llvm-svn: 225555
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225000
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224941
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224385
Richard rejected my Sema change to interpret an integer literal zero in
a varargs context as a null pointer, so -Wsentinel sees an integer
literal zero and fires off a warning. Only CodeGen currently knows that
it promotes integer literal zeroes in this context to pointer size on
Windows. I didn't want to teach -Wsentinel about that compatibility
hack. Therefore, I'm migrating to C++11 nullptr.
llvm-svn: 223079
Rethrowing exceptions in the MS model is very simple: just call
_CxxThrowException with nullptr for both arguments.
N.B. They chose stdcall as the calling convention for x86 but cdecl for
all other platforms.
llvm-svn: 222733
When targeting Windows itanium (a MSVC environment), use itanium style
exceptions rather than SEH. Existing test cases already test this code path.
Applying this change ensures that tests wont break due to a parallel change in
LLVM (to correctly report isMSVCEnvironment).
llvm-svn: 222179
This option was misleading because it looked like it enabled the
language feature of SEH (__try / __except), when this option was really
controlling which EH personality function to use. Mingw only supports
SEH and SjLj EH on x86_64, so we can simply do away with this flag.
llvm-svn: 221963
While we ran getUnqualifiedType over the catch type,
it isn't enough for array types. Use getUnqualifiedArrayType instead.
This fixes PR21252.
llvm-svn: 219582
This adds a flag called -fseh-exceptions that uses the native Windows
.pdata and .xdata unwind mechanism to throw exceptions. The other EH
possibilities are DWARF and SJLJ exceptions.
Patch by Martell Malone!
Reviewed By: asl, rnk
Differential Revision: http://reviews.llvm.org/D3419
llvm-svn: 217790
This patch removes the dead code, and refines the
getEHResumeBlock() slightly.
The CleanupHackLevel was a hack to the old exception
handling intrinsics, which have several issues with function
inliner.
Since LLVM 3.0, the new landingpad and resume instructions
are added to LLVM IR. With the new exception handling
mechanism, most of the issues are fixed now. We should
always use these instructions to implement the exception
handling code nowadays, and we don't need the hack any more.
Besides, the `CleanupHackLevel` is a compile-time constant,
thus other cases have been considered as dead code for a while.
llvm-svn: 212097
Currently, users get error messages about RTTI descriptor mangling with
no useful source location. This addresses that.
Another approach would be to disable C++ exceptions by default in the
driver when using the Microsoft C++ ABI. However, this makes it
impossible to parse system headers that use exception handling
constructs. By delaying the error to IRgen, we can figure out if we
actually need to emit code for this construct. Additionally, users who
are only interested in building refactoring tools on Windows still get a
correct AST without having to add flags. Finally, this is consistent
with what we do for SEH.
llvm-svn: 207999
r203364: what was use_iterator is now user_iterator, and there is
a use_iterator for directly iterating over the uses.
This also switches to use the range-based APIs where appropriate.
llvm-svn: 203365
class and use it pervasively to restore debug locations.
Fixes an interaction between cleanup and EH that caused the location
to not be restored properly after emitting a landing pad.
rdar://problem/15208190
llvm-svn: 199444
Reid Kleckner