We are trying to prove that one group of operands is a subset of
another. We did this by populating two Sets and determining that every
element within one was inside the other.
However, this is unnecessary. We can simply construct a single set and
test if each operand is within it.
llvm-svn: 278641
Recursive calls to aliasCheck from alias[GEP|Select|PHI] may result in a second call to GetUnderlyingObject for a Value, whose underlying object is already computed. This patch ensures that in this situations, the underlying object is not computed again, and the result of the previous call is resued.
https://reviews.llvm.org/D22305
llvm-svn: 278519
Rewrite Visited[Cond] = getValueFromConditionImpl(..., Visited) statement which can lead to a memory corruption since getValueFromConditionImpl changes Visited map and invalidates the iterators.
llvm-svn: 278514
Summary:
Port the ModuleSummaryAnalysisWrapperPass to the new pass manager.
Use it in the ported BitcodeWriterPass (similar to how we use the
legacy ModuleSummaryAnalysisWrapperPass in the legacy WriteBitcodePass).
Also, pass the -module-summary opt flag through to the new pass
manager pipeline and through to the bitcode writer pass, and add
a test that uses it.
Reviewers: mehdi_amini
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23439
llvm-svn: 278508
Take range metadata into account for conditions like this:
%length = load i32, i32* %length_ptr, !range !{i32 0, i32 2147483647}
%cmp = icmp ult i32 %a, %length
This is a common pattern for range checks where the length of the array is dynamically loaded.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D23267
llvm-svn: 278496
Currently LVI can only gather value constraints from comparisons like:
* icmp <pred> Val, ...
* icmp ult (add Val, Offset), ...
In fact we can handle any predicate in latter comparisons.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D23357
llvm-svn: 278493
This method had some duplicate code when we did or did not have a dom tree. Refactor
it to remove the duplication, but also clean up the control flow to have less duplication.
llvm-svn: 278450
There were 2 versions of this method. A public one which takes a
const Instruction* and a private implementation which takes a mutable
Value* and casts to an Instruction*.
There was no need for the 2 versions as all callers pass a const Instruction*
and there was no need for a mutable pointer as we only do analysis here.
llvm-svn: 278434
Summary:
This is an extension of the fix in r271424. That fix dealt with builder
insert points being moved by SCEV expansion, but only for the lifetime
of the expand call. This change modifies the interface so that LSR can
safely call expand multiple times at the same insert point and do the
right thing if one of the expansions decides to move the original insert
point.
This is a fix for PR28719.
Reviewers: sanjoy
Subscribers: llvm-commits, mcrosier, mzolotukhin
Differential Revision: https://reviews.llvm.org/D23342
llvm-svn: 278413
Summary:
I think it is much better this way.
When I firstly saw line:
Cost += InlineConstants::LastCallToStaticBonus;
I though that this is a bug, because everywhere where the cost is being reduced
it is usuing -=.
Reviewers: eraman, tejohnson, mehdi_amini
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D23222
llvm-svn: 278290
Teach LVI how to gather information from conditions in the form of (cond1 && cond2). Our out-of-tree front-end emits range checks in this form.
Reviewed By: sanjoy
Differential Revision: http://reviews.llvm.org/D23200
llvm-svn: 278231
Instead of returning bool and setting LVILatticeValue reference argument return LVILattice value. Use overdefined value to denote the case when we didn't gather any information from the condition.
This change was separated from the review "[LVI] Handle conditions in the form of (cond1 && cond2)" (https://reviews.llvm.org/D23200#inline-199531). Once getValueFromCondition returns LVILatticeValue we can cache the result in Visited map.
llvm-svn: 278224
The problem was triggered by my recent change in CVP (D23059). Current code expected that integer constants are represented by constantrange LVILatticeVal and never represented as LVILatticeVal with constant tag. That is true for ConstantInt constants, although ConstantExpr integer type constants are legally represented as constant LVILatticeVal.
This code fails with CVP change in:
@b = global i32 0, align 4
define void @test6(i32 %a) {
bb:
%add = add i32 %a, ptrtoint (i32* @b to i32)
ret void
}
Currently getConstantRange code is not executed by any of the upstream passes. I'm going to add a test case to test/Transforms/CorrelatedValuePropagation/add.ll once I resubmit the CVP change.
Reviewed By: sanjoy
Differential Revision: http://reviews.llvm.org/D23194
llvm-svn: 278217
This adds an InlineParams struct which is populated from the command line options by getInlineParams and passed to getInlineCost for the call analyzer to use.
Differential revision: https://reviews.llvm.org/D22120
llvm-svn: 278189
Summary:
The inliner not being a function pass requires the work-around of
generating the OptimizationRemarkEmitter and in turn BFI on demand.
This will go away after the new PM is ready.
BFI is only computed inside ORE if the user has requested hotness
information for optimization diagnostitics (-pass-remark-with-hotness at
the 'opt' level). Thus there is no additional overhead without the
flag.
Reviewers: hfinkel, davidxl, eraman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22694
llvm-svn: 278185
The patch is to fix the bug in PR28705. It was caused by setting wrong return
value for SCEVExpander::findExistingExpansion. The return values of findExistingExpansion
have different meanings when the function is used in different ways so it is easy to make
mistake. The fix creates two new interfaces to replace SCEVExpander::findExistingExpansion,
and specifies where each interface is expected to be used.
Differential Revision: https://reviews.llvm.org/D22942
llvm-svn: 278161
The fix for PR28705 will be committed consecutively.
In D12090, the ExprValueMap was added to reuse existing value during SCEV expansion.
However, const folding and sext/zext distribution can make the reuse still difficult.
A simplified case is: suppose we know S1 expands to V1 in ExprValueMap, and
S1 = S2 + C_a
S3 = S2 + C_b
where C_a and C_b are different SCEVConstants. Then we'd like to expand S3 as
V1 - C_a + C_b instead of expanding S2 literally. It is helpful when S2 is a
complex SCEV expr and S2 has no entry in ExprValueMap, which is usually caused
by the fact that S3 is generated from S1 after const folding.
In order to do that, we represent ExprValueMap as a mapping from SCEV to
ValueOffsetPair. We will save both S1->{V1, 0} and S2->{V1, C_a} into the
ExprValueMap when we create SCEV for V1. When S3 is expanded, it will first
expand S2 to V1 - C_a because of S2->{V1, C_a} in the map, then expand S3 to
V1 - C_a + C_b.
Differential Revision: https://reviews.llvm.org/D21313
llvm-svn: 278160
Summary:
We teach alias analysis that invariant.start is readonly.
This helps with GVN and memcopy optimizations that currently treat.
invariant.start as a clobber.
We need to treat this as readonly, so that DSE does not incorrectly
remove stores prior to the invariant.start
Reviewers: sanjoy, reames, majnemer, dberlin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23214
llvm-svn: 278138
One exception here is LoopInfo which must forward-declare it (because
the typedef is in LoopPassManager.h which depends on LoopInfo).
Also, some includes for LoopPassManager.h were needed since that file
provides the typedef.
Besides a general consistently benefit, the extra layer of indirection
allows the mechanical part of https://reviews.llvm.org/D23256 that
requires touching every transformation and analysis to be factored out
cleanly.
Thanks to David for the suggestion.
llvm-svn: 278079
Besides a general consistently benefit, the extra layer of indirection
allows the mechanical part of https://reviews.llvm.org/D23256 that
requires touching every transformation and analysis to be factored out
cleanly.
Thanks to David for the suggestion.
llvm-svn: 278078
Besides a general consistently benefit, the extra layer of indirection
allows the mechanical part of https://reviews.llvm.org/D23256 that
requires touching every transformation and analysis to be factored out
cleanly.
Thanks to David for the suggestion.
llvm-svn: 278077
This reverts commit r278048. Something changed between the last time I
built this--it takes awhile on my ridiculously slow and ancient
computer--and now that broke this.
llvm-svn: 278053
Summary:
Based on two patches by Michael Mueller.
This is a target attribute that causes a function marked with it to be
emitted as "hotpatchable". This particular mechanism was originally
devised by Microsoft for patching their binaries (which they are
constantly updating to stay ahead of crackers, script kiddies, and other
ne'er-do-wells on the Internet), but is now commonly abused by Windows
programs to hook API functions.
This mechanism is target-specific. For x86, a two-byte no-op instruction
is emitted at the function's entry point; the entry point must be
immediately preceded by 64 (32-bit) or 128 (64-bit) bytes of padding.
This padding is where the patch code is written. The two byte no-op is
then overwritten with a short jump into this code. The no-op is usually
a `movl %edi, %edi` instruction; this is used as a magic value
indicating that this is a hotpatchable function.
Reviewers: majnemer, sanjoy, rnk
Subscribers: dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D19908
llvm-svn: 278048
Gathering constantins from a condition on the false path ask makeAllowedICmpRegion about inverse predicate instead of inversing the resulting range.
This change was separated from the review "[LVI] Make LVI smarter about comparisons with non-constants" (https://reviews.llvm.org/D23205#inline-198361)
llvm-svn: 278009
David Majnemer