When the range between the source and target of a V7PILongThunk exceeded an
int32 we would trigger a relocation out of range error for the
R_ARM_MOVT_PREL or R_ARM_THM_MOVT_PREL relocation. This case can happen when
linking the linux kernel as it is loaded above 0xf0000000.
There are two parts to the fix.
- Remove the overflow check for R_ARM_MOVT_PREL or R_ARM_THM_MOVT_PREL. The
ELF for the ARM Architecture document defines these relocations as having no
overflow checking so the check was spurious.
- Use int64_t for the offset calculation, in line with similar thunks so
that PC + (S - P) < 32-bits. This results in less surprising disassembly.
Differential Revision: https://reviews.llvm.org/D56396
llvm-svn: 350836
The section and offset can be very helpful in diagnosing certian errors.
For example on a relocation overflow or misalignment diagnostic:
test.c:(function foo): relocation R_PPC64_ADDR16_DS out of range: ...
The function foo can have many R_PPC64_ADDR16_DS relocations. Adding the offset
and section will identify exactly which relocation is causing the failure.
Differential Revision: https://reviews.llvm.org/D56453
llvm-svn: 350828
In the PPC64 target we map toc-relative relocations, dynamic thread pointer
relative relocations, and got relocations into a corresponding ADDR16 relocation
type for handling in relocateOne. This patch saves the orignal RelType before
mapping to an ADDR16 relocation so that any diagnostic messages will not
mistakenly use the mapped type.
Differential Revision: https://reviews.llvm.org/D56448
llvm-svn: 350827
Patch by Michael Skvortsov!
This change adds a basic support for linking static MSP430 ELF code.
Implemented relocation types are intended to correspond to the BFD.
Differential revision: https://reviews.llvm.org/D56535
llvm-svn: 350819
My main motivation is that I can never remember /nodefaultlib and
`lld-link /? | grep no` didn't display it due to it not having a help string.
Differential Revision: https://reviews.llvm.org/D56502
llvm-svn: 350750
ARM and AArch64 use TLS variant 1, where the first two words after the
thread pointer are reserved for the TCB, followed by the executable's TLS
segment. Both the thread pointer and the TLS segment are aligned to at
least the TLS segment's alignment.
Android/Bionic historically has not supported ELF TLS, and it has
allocated memory after the thread pointer for several Bionic TLS slots
(currently 9 but soon only 8). At least one of these allocations
(TLS_SLOT_STACK_GUARD == 5) is widespread throughout Android/AArch64
binaries and can't be changed.
To reconcile this disagreement about TLS memory layout, set the minimum
alignment for executable TLS segments to 8 words on ARM/AArch64, which
reserves at least 8 words of memory after the TP (2 for the ABI-specified
TCB and 6 for alignment padding). For simplicity, and because lld doesn't
know when it's targeting Android, increase the alignment regardless of
operating system.
Differential Revision: https://reviews.llvm.org/D53906
llvm-svn: 350681
llvm-readobj currently has a bug (see PR40097) where it prints '@' at
the end of unversioned dynamic symbols. This bug will be fixed in a
separate later commit, but these tests need fixing first.
Reviewed by: ruiu, Higuoxing
Differential Revision: https://reviews.llvm.org/D56388
llvm-svn: 350614
Saves up to 1.3 sec on large PDBs.
Figures below are for the "Globals Stream Layout" pass:
Before This patch
Large EXE (PDB is ~2 GB) 3330 ms 2022 ms
Large EXE (PDB is ~2 GB) 2680 ms 1608 ms
Large DLL (PDB is ~1 GB) 1455 ms 938 ms
Large DLL (PDB is ~800 MB) 1215 ms 800 ms
Small DLL (PDB is ~200 MB) 224 ms 146 ms
Differential Revision: https://reviews.llvm.org/D56334
llvm-svn: 350452
Fixes https://bugs.llvm.org/show_bug.cgi?id=40134
addWrappedSymbols() must be called before addReservedSymbols() because the
latter only defines reserved symbols when they are undefined in the symbol
table. If addWrappedSymbols() is called after, then addUndefined() is called
which may lazily pull in more object files that could reference reserved
symbols.
Differential Revision: https://reviews.llvm.org/D56110
llvm-svn: 350251
Summary:
If a DSO appears more than once with and without --as-needed, ld.bfd and gold consider --no-as-needed to takes precedence over --as-needed. lld didn't and this patch makes it do so.
This makes it a bit away from the position-dependent behavior (how
different occurrences of the same DSO interact) and protects us from
some mysterious runtime errors: if some interceptor libraries add their
own --no-as-needed dependencies (e.g. librt.so), and the user
application specifies -Wl,--as-needed -lrt , the absence of the
DT_NEEDED entry would make dlsym(RTLD_NEXT, "clock_gettime") return NULL
and would break at runtime.
Reviewers: ruiu, espindola
Reviewed By: ruiu
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D56089
llvm-svn: 350105
Summary:
For unknown reasons LLD tests are flaky on the NetBSD buildbot,
but not on local machines of developers.
Unless the linker will be fully functional on this target,
allow to pass flaky tests with optional retry.
Reviewers: joerg, mgorny, ruiu
Reviewed By: mgorny
Subscribers: lebedev.ri, MaskRay, llvm-commits, #lld
Tags: #lld
Differential Revision: https://reviews.llvm.org/D56053
llvm-svn: 350036
There was a bug in LLVM's libDebugInfo where it did not porpagate the
section index through the range query built from low_pc/high_pc. Hard to
test in LLVM, so I'm adding a test here.
llvm-svn: 350011
When parsing CU ranges for gdb-index, handle the error (now propagated
up though the API lld is calling here - previously the error was
printed within the libDebugInfo API, not allowing lld to format or
handle the message at all) - including information about the object and
archive name, as well as failing the link.
llvm-svn: 349979
Summary:
For the 2-bit bloom filter, we currently pick the bits Hash%64 and Hash>>6%64 (Shift2=6), but bits [6:...] are also used to select a word, causing a loss of precision.
In this patch, we choose Shift2=26, with is suggested by Ambrose Feinstein.
Note, Shift2 is computed as maskbitslog2 in bfd/elflink.c and gold/dynobj.cc
It is varying with the number of dynamic symbols but we don't
necessarily copy its rule.
Reviewers: ruiu, espindola
Reviewed By: ruiu
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D55971
llvm-svn: 349966
Summary:
This is a common error, and because many people don't know what the key
function is, it is sometimes very confusing.
The doc was originally written by Brooks Moses and slightly edited by me.
Reviewers: MaskRay, espindola
Subscribers: emaste, llvm-commits, arichardson
Differential Revision: https://reviews.llvm.org/D55968
llvm-svn: 349941
Summary:
In glibc, libc.so is a linker script with an as-needed dependency on ld-linux-x86-64.so.2
GROUP ( /lib/x86_64-linux-gnu/libc.so.6 /usr/lib/x86_64-linux-gnu/libc_nonshared.a AS_NEEDED ( /lib/x86_64-linux-gnu/ld-linux-x86-64.so.2 ) )
ld-linux-x86-64.so.2 (as-needed) defines some symbols which resolve undefined references in libc.so.6, it will therefore be added as a DT_NEEDED entry, which isn't necessary.
The test case as-needed-not-in-regular.s emulates the libc.so scenario, where ld.bfd and gold don't add DT_NEEDED for a.so
The relevant code in gold/resolve.cc:
// If we have a non-WEAK reference from a regular object to a
// dynamic object, mark the dynamic object as needed.
if (to->is_from_dynobj() && to->in_reg() && !to->is_undef_binding_weak())
to->object()->set_is_needed();
in_reg() appears to do something similar to IsUsedInRegularObj.
This patch makes lld do the similar thing, but moves the check from
addShared to a later stage MarkLive where all symbols are scanned.
Reviewers: ruiu, pcc, espindola
Reviewed By: ruiu
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D55902
llvm-svn: 349849
When we report an error for symbols defined in the linker script,
we do not report the location properly.
For example:
ld.lld: error: relocation R_AARCH64_CALL26 cannot refer to absolute symbol: aliasto__text
>>> defined in <internal>
>>> referenced by rtoabs.o:(.text+0x4)
This patch fixes that.
Differential revision: https://reviews.llvm.org/D55360
llvm-svn: 349612
Previously, this code printed out an error message like this
ld.lld: error: --reproduce: failed to open /foo: cannot open /foo
Apparently "failed to open /foo:" part is redundant.
llvm-svn: 349571
Previously, if you pass -static to lld, lld searches for only foo.a
and skips foo.so for -lfoo option. However, it didn't reject .so files
if you directly pass their pathnames via the command line, which is a bug.
Differential Revision: https://reviews.llvm.org/D55845
llvm-svn: 349557
Summary:
Other large sections (e.g. .rela.dyn .dynstr) may push .note.* off the
first page. They won't be available in core files if RLIMIT_CORE is
limited.
This patch gives priority to alloctable SHT_NOTE sections so that they
are assuredly in the first page and will be available in core files.
They are small and contain important information (e.g. .note.gnu.build-id
identifies the origin of the core, .note.tag stores NT_FREEBSD_ABI_TAG).
Note: gold Output_section_order has a similar rule:
// Loadable read-only note sections come next so that the PT_NOTE
// segment is on the first page of the executable.
ORDER_RO_NOTE,
Reviewers: ruiu, pcc, espindola
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D55800
llvm-svn: 349524
In PDBs, symbol records must be aligned to four bytes. However, in the
object file, symbol records may not be aligned. MSVC does not pad out
symbol records to make sure they are aligned. That means the linker has
to do extra work to insert the padding. Currently, LLD calculates the
required space with alignment, and copies each record one at a time
while padding them out to the correct size. It has a fast path that
avoids this copy when the records are already aligned.
This change fixes a bug in that codepath so that the copy is actually
saved, and tweaks LLVM's symbol record emission to align symbol records.
Here's how things compare when doing a plain clang Release+PDB build:
- objs are 0.65% bigger (negligible)
- link is 3.3% faster (negligible)
- saves allocating 441MB
- new LLD high water mark is ~1.05GB
llvm-svn: 349431
The code here wants the output section offset of the instruction
requiring the errata patch, not the virtual address. Without this
change we can end up placing a patch out of range if the virtual
address of the code section is large enough.
Differential Revision: https://reviews.llvm.org/D55732
llvm-svn: 349386
ARM Architecture v6m is used by the smallest microcontrollers such as the
cortex-m0. It is Thumb only (no Thumb 2) which prevents it from using the
existing Thumb 2 range extension thunks as these use the Thumb 2 movt/movw
instructions. Range extension thunks are not usually needed for
microcontrollers due to the small amount of flash and ram on the device,
however if code is copied from flash into ram then a range extension thunk
is required to call that code.
This change adds support for v6m range extension thunks. The procedure call
standard APCS permits a thunk to corrupt the intra-procedural scratch
register r12 (referred to as ip in the APCS). Most Thumb instructions do
not permit access to high registers (r8 - r15) so the thunks must spill
some low registers (r0 - r7) to perform the control transfer.
Fixes pr39922
Differential Revision: https://reviews.llvm.org/D55555
llvm-svn: 349337
Previously we considered R_ARM_V4BX to be an absolute relocation,
which meant that we rejected it in read-only sections in PIC output
files. Instead, treat it as a hint relocation so that relocation
processing ignores it entirely.
Also fix a problem with the test case where it was never being run
because it has a .yaml extension and we don't run tests with that
extension.
Differential Revision: https://reviews.llvm.org/D55728
llvm-svn: 349216
Capture the stderr from 'tar --version' call as otherwise error messages
spill onto user's terminal unnecessarily (e.g. on NetBSD where tar does
not support long options). While at it, refactor the code to use
communicate() instead of reinventing the wheel.
Differential Revision: https://reviews.llvm.org/D55443
llvm-svn: 349204
`--plugin-opt=emit-llvm` is an option for LTO. It makes the linker to
combine all bitcode files and write the result to an output file without
doing codegen. Gold LTO plugin has this option.
This option is being used for some post-link code analysis tools that
have to see a whole program but don't need to see them in the native
machine code.
Differential Revision: https://reviews.llvm.org/D55717
llvm-svn: 349198
When calling BinaryStreamArray::drop_front(), if the stream
is skewed it means we must never drop the first bytes of the
stream since offsets which occur in records assume the existence
of those bytes. So if we want to skip the first record in a
stream, then what we really want to do is just set the begin
pointer to the next record. But we shouldn't actually remove
those bytes from the underlying view of the data.
llvm-svn: 349066
In the ABI for the 64-bit Arm architecture the section on weak references
states:
During linking, the symbol value of an undefined weak reference is:
- Zero if the relocation type is absolute
- The address of the place if the relocation type is pc-relative.
The relocations associated with an ADRP are relative so we should resolve
the undefined weak reference to the place instead of 0. This matches GNU
ld.bfd behaviour.
fixes pr34928
Differential Revision: https://reviews.llvm.org/D55599
llvm-svn: 349024
Unlike GNU tar and libarchive bsdtar, NetBSD 'tar -t' output does not
use C-style escapes and instead outputs paths literally. Fix the test
to account both for escaped and literal backslash output.
Differential Revision: https://reviews.llvm.org/D55441
llvm-svn: 348628
This was a missing piece.
We started to print LMAs and information about assignments,
but did not do that for assignments outside of section declarations yet.
The patch implements it.
Differential revision: https://reviews.llvm.org/D45314
llvm-svn: 348468
The test breaks on buildbots that don't enable the x86 backend. Other
tests in this directory explicitly require x86, so this should do the
trick.
llvm-svn: 348466
This is a part of
https://bugs.llvm.org/show_bug.cgi?id=39885
Linker script specification says:
"You can specify a file name to include sections from a particular file. You would
do this if one or more of your files contain special data that needs to be at a
particular location in memory."
LLD did not accept this syntax. The patch implements it.
Differential revision: https://reviews.llvm.org/D55324
llvm-svn: 348463
Previously, we have a hash table containing strings and their offsets
to manage mergeable strings. Technically we can live without that, because
we can do binary search on a vector of mergeable strings to find a mergeable
strings.
We did have both the hash table and the binary search because we thought
that that is faster.
We recently observed that lld tend to consume more memory than gold when
building an output with debug info. A few percent of memory is consumed by
the hash table. So, we needed to reevaluate whether or not having the extra
hash table is a good CPU/memory tradeoff. I run a few benchmarks with and
without the hash table.
I got a mixed result for the benchmark. We observed a regression for some
programs by removing the hash table (that's what we expected), but we also
observed that performance imrpovements for some programs. This is perhaps
due to reduced memory usage.
Differential Revision: https://reviews.llvm.org/D55234
llvm-svn: 348401
Previously these were dropped. We now understand them sufficiently
well to start emitting them. From the debugger's perspective, this
now enables us to have debug info about typedefs (both global and
function-locally scoped)
Differential Revision: https://reviews.llvm.org/D55228
llvm-svn: 348306
Patch from Andrew Kelley.
For context, see https://bugs.llvm.org/show_bug.cgi?id=39862
The use case is embedded / OS programming where the kernel wants
access to its own debug info via mapped dwarf info. I have a proof of
concept of this working, using this linker script snippet:
.rodata : ALIGN(4K) {
*(.rodata)
__debug_info_start = .;
KEEP(*(.debug_info))
__debug_info_end = .;
__debug_abbrev_start = .;
KEEP(*(.debug_abbrev))
__debug_abbrev_end = .;
__debug_str_start = .;
KEEP(*(.debug_str))
__debug_str_end = .;
__debug_line_start = .;
KEEP(*(.debug_line))
__debug_line_end =
.;
__debug_ranges_start
= .;
KEEP(*(.debug_ranges))
__debug_ranges_end
= .;
}
Differential revision: https://reviews.llvm.org/D55276
llvm-svn: 348291
When linking the linux kernel on ppc64le
ld.lld -EL -m elf64lppc -Bstatic --orphan-handling=warn --build-id -o
.tmp_vmlinux1 -T ./arch/powerpc/kernel/vmlinux.lds --whole-archive
built-in.a --no-whole-archive --start-group lib/lib.a --end-group
ld.lld: error: discarding .rela.plt section is not allowed
The linker script discards with the following matches
*(.glink .iplt .plt .rela* .comment)
Differential Revision: https://reviews.llvm.org/D54871
llvm-svn: 348258
When linking the linux kernel on ppc64 and ppc
ld.lld: error: unrecognized reloc 11
11 is PPC_REL14 and PPC64_REL14
Differential revision: https://reviews.llvm.org/D54868
llvm-svn: 348255
At least on Linux, if a file size given to FileOutputBuffer is greater
than 2^63, it fails with "Invalid argument" error, which is not a
user-friendly error message. With this patch, lld prints out "output
file too large" instead.
llvm-svn: 348153
There is no need to check that In.DynSymTab != nullptr,
because `includeInDynsym` already checks for `!Config->HasDynSymTab`
and `HasDynSymTab` is the pre-condition for In.DynSymTab creation.
llvm-svn: 348143
Now LLD might build the broken/incomplete .gdb_index when some DWARF v5
sections (like .debug_rnglists and .debug_addr) are used.
Particularly, for the case above, we emit an empty address area.
A test case is provided and patch fixes the issue.
Differential revision: https://reviews.llvm.org/D55109
llvm-svn: 348119
We initialize .text section with 0xcc (INT3 instruction), so we need to
explicitly write data even if it is zero if it can be in a .text section.
If you specify /merge:.rdata=.text, .rdata (which contains .idata) is put
to .text, so we need to do this.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39826
Differential Revision: https://reviews.llvm.org/D55098
llvm-svn: 348000
The _GLOBAL_OFFSET_TABLE_ is a linker defined symbol that is placed at
some location relative to the .got, .got.plt or .toc section. On some
targets such as Arm the correctness of some code sequences using a
relocation to _GLOBAL_OFFSET_TABLE_ depend on the value of the symbol
being in the linker defined place. Follow the ld.gold example and give
a multiple symbol definition error. The ld.bfd behaviour is to ignore the
definition in the input object and redefine it, which seems like it could
be more surprising.
fixes pr39587
Differential Revision: https://reviews.llvm.org/D54624
llvm-svn: 347854
This is an reland of rL343155 which got reverted because
of a sphinx failure on the buildbot.
Differential Revision: https://reviews.llvm.org/D54982
llvm-svn: 347830
Summary:
This reinstates what I originally intended to do in D54361.
It removes the assumption that .debug_gnu_pubnames has increasing CuOffset.
Now we do better than gold here: when .debug_gnu_pubnames contains
multiple sets, gold would think every set has the same CU index as the
first set (incorrect).
Reviewed By: ruiu
Reviewers: ruiu, dblaikie, espindola
Subscribers: emaste, arichardson, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54483
llvm-svn: 347820
This patch also makes getPltEntryOffset a non-member function because
it doesn't depend on any private members of the TargetInfo class.
I tried a few different ideas, and it seems this change fits in best to me.
Differential Revision: https://reviews.llvm.org/D54981
llvm-svn: 347781
The DT_PLTRELSZ dynamic tag is calculated using the size of the
OutputSection containing the In.RelaPlt InputSection. This will work for the
default no linker script case and the majority of linker scripts.
Unfortunately it doesn't work for some 'almost' sensible linker scripts. It
is permitted by ELF to have a single OutputSection containing both
In.RelaDyn, In.RelaPlt and In.RelaIPlt. It is also permissible for the range
of memory [DT_RELA, DT_RELA + DT_RELASZ) and the range
[DT_JMPREL, DT_JMPREL + DT_JMPRELSZ) to overlap as long as the the latter
range is at the end.
To support this type of linker script use the specific InputSection sizes.
Fixes pr39678
Differential Revision: https://reviews.llvm.org/D54759
llvm-svn: 347736
The number of sections is used in assignAddresses (in
finalizeAddresses) and the space for all sections is permanent from
that point on, even if we later decide we won't write some of them.
The VirtualSize field also gets calculated in assignAddresses, so we
need to manually check whether the section is empty here instead.
Differential Revision: https://reviews.llvm.org/D54495
llvm-svn: 347704
Summary:
This speeds up linking clang.exe/pdb with /DEBUG:GHASH by 31%, from
12.9s to 9.8s.
Symbol records are typically small (16.7 bytes on average), but we
processed them one at a time. CVSymbol is a relatively "large" type. It
wraps an ArrayRef<uint8_t> with a kind an optional 32-bit hash, which we
don't need. Before this change, each DbiModuleDescriptorBuilder would
maintain an array of CVSymbols, and would write them individually with a
BinaryItemStream.
With this change, we now add symbols that happen to appear contiguously
in bulk. For each .debug$S section (roughly one per function), we
allocate two copies, one for relocation, and one for realignment
purposes. For runs of symbols that go in the module stream, which is
most symbols, we now add them as a single ArrayRef<uint8_t>, so the
vector DbiModuleDescriptorBuilder is roughly linear in the number of
.debug$S sections (O(# funcs)) instead of the number of symbol records
(very large).
Some stats on symbol sizes for the curious:
PDB size: 507M
sym bytes: 316,508,016
sym count: 18,954,971
sym byte avg: 16.7
As future work, we may be able to skip copying symbol records in the
linker for realignment purposes if we make LLVM write them aligned into
the object file. We need to double check that such symbol records are
still compatible with link.exe, but if so, it's definitely worth doing,
since my profile shows we spend 500ms in memcpy in the symbol merging
code. We could potentially cut that in half by saving a copy.
Alternatively, we could apply the relocations *after* we iterate the
symbols. This would require some careful re-engineering of the
relocation processing code, though.
Reviewers: zturner, aganea, ruiu
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D54554
llvm-svn: 347687
This is https://bugs.llvm.org/show_bug.cgi?id=38074.
The issue is that when calling a function, LLD generates a
.got entry that points to the IFUNC resolver function when
instead, it should use the PLT entries properly for
handling the IFUNC.
So we should create a got entry that points to PLT entry,
which itself loads the value from
.got.plt, relocated with R_*_IRELATIVE to make things work.
Patch do that.
Differential revision: https://reviews.llvm.org/D54314
llvm-svn: 347650
The changes to the instructions performed by TLS relaxation and the errata
patching are performed with relocations. As these are applied so late the
errata scanning won't see the changes in the section data made by the TLS
relaxation. This can lead to a TLS relaxed sequence being patched when it
doesn't need to be.
The fix checks to see if there is a R_RELAX_TLS_IE_TO_LE instruction at the
same address as the ADRP as this indicates the presence of a relaxation
of a sequence that might get recognised as a patch.
Differential Revision: https://reviews.llvm.org/D54854
llvm-svn: 347649
This is https://bugs.llvm.org//show_bug.cgi?id=38978
Spec says that:
"Objects may be built with the -z nodefaultlib option to
suppress any search of the default locations at runtime.
Use of this option implies that all the dependencies of an
object can be located using its runpaths.
Without this option, which is the most common case, no
matter how you augment the runtime linker's library
search path, its last element is always /usr/lib for 32-bit
objects and /usr/lib/64 for 64-bit objects."
The patch implements this option.
Differential revision: https://reviews.llvm.org/D54577
llvm-svn: 347647
GNU ld, which doesn't generate PDBs, can optionally generate a
build id by passing the --build-id option. LLD's MinGW frontend knows
about this option but ignores it, as I had falsely assumed that LLD
already generated build IDs even in those cases.
If debug info is requested and no PDB path is set, generate a
build id signature as a hash of the binary itself. This allows
associating a binary to a minidump, even if debug info isn't
written in PDB form by the linker.
Differential Revision: https://reviews.llvm.org/D54828
llvm-svn: 347645
Summary:
MSVC does this, and we should to.
The .gfids table is a table of RVAs, so it's impossible for a DLL to
indicate that an imported symbol is address taken. Therefore, exports
appear to be listed as address taken by the DLL that exports them.
This fixes an issue that Firefox ran into here:
https://bugzilla.mozilla.org/show_bug.cgi?id=1485016#c12
In Firefox, the export directive came from a .def file, but we need to
do this for any kind of export.
Reviewers: dmajor, hans, amccarth, alex
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54723
llvm-svn: 347623
The benefits are:
a) Performance (very minor): it removes a heap allocation of the std::function constructor (template<class F> function(F f))
b) Clarity: it suggests that the callable's lifetime should end after the callee returns. Such callback is widely used in llvm. lld also uses it a lot.
Reviewers: ruiu, rnk, pcc
Reviewed By: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54813
llvm-svn: 347620
On my machine this reduced median link time of lld-speed-test/chrome
from 2.68s to 2.41s. It also reduces link time of Chrome for Android
with a prototype compiler change that causes the compiler to create
large numbers of identical (modulo relocations) sections from >15
minutes to a few seconds.
Differential Revision: https://reviews.llvm.org/D54773
llvm-svn: 347594
Summary: They have an additional `ThreadsEnabled` check, which does not matter much.
Reviewers: pcc, ruiu, rnk
Reviewed By: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54812
llvm-svn: 347587
When we are in a error state, script parser will not parse the -defsym
expression and hence will not tokenize it. Then ScriptLexer::Pos will be 0
and LLD will assert and crash here:
MemoryBufferRef ScriptLexer::getCurrentMB() {
assert(!MBs.empty() && Pos > 0); // Bang !
Solution - stop parsing the defsym in a error state. That is consistent
with the regular case (when we parse the linker script).
llvm-svn: 347549
We explicitly call finalizeContents() only once for
DynamicSection. The code testing we do not do it twice is
just excessive.
It could be an assert, but we don't do
that for other sections, so does not seem we
should do it here too.
llvm-svn: 347543
Now it returns Symbol. This should be NFC that
avoids doing cast at the caller's sides.
Differential revision: https://reviews.llvm.org/D54627
llvm-svn: 347455
Previously we were taking over 13 minutes to link Firefox's xul.dll
on ARM64; this reduces link time to around 18s on my machine.
The root cause of the problem was that all of the input .pdata sections
had the same unrelocated section data and therefore the same hash,
which made segregation quadratic in the number of .pdata sections. The
reason why we weren't observing this on other architectures was that
ARM has a different .pdata format. On non-ARM the format is (start
address, end address, .xdata), which caused the size of the function
to appear in the unrelocated section data where the end address field
is. However, the ARM format omits the end address field.
Fixes PR39667.
Differential Revision: https://reviews.llvm.org/D54809
llvm-svn: 347429
Summary:
This fixes PR39711: -static -z retpolineplt does not produce retpoline PLT header.
-z now is not relevant.
Statically linked executable does not have PLT, but may have IPLT with no header. When -z retpolineplt is specified, however, the repoline PLT header should still be emitted.
I've checked that this fixes the FreeBSD reproduce in PR39711 and a Linux program statically linked against glibc. The programm print "Hi" rather than SIGILL/SIGSEGV.
getPltEntryOffset may look dirty after this patch, but it can be cleaned up later.
Another possible improvement is that when there are non-preemptible IFUNC symbols (rare case, e.g. -Bsymbolic), both In.Plt and In.Iplt can be non-empty and we'll emit the retpoline PLT header twice.
Reviewers: espindola, emaste, chandlerc, ruiu
Reviewed By: emaste
Subscribers: emaste, arichardson, krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D54782
llvm-svn: 347404
When REQUIRES: ARM is used the test is skipped as ARM is not recognized.
Change to REQUIRES: arm so that it is run. This required updating one of the
tests due to changes in expected output.
Differential Revision: https://reviews.llvm.org/D54786
llvm-svn: 347388
Don't use a uint32_t*, use a ulittle32_t* to make this correct
on big endian systems.
Patch by James Clarke
Differential Revision: https://reviews.llvm.org/D54421
llvm-svn: 347349
Summary:
When --noinhibit-exec is used, ld.bfd/gold emit errors but allow to produce corrupted executable, which is handy for debugging purpose. lld's --noinhibit-exec has a different meaning and changes some errors to warnings. This patch replaces "error" with "errorOrWarn" to exploit that property.
We may revisit this: if we should keep them as errors (as ld.bfd/gold do) but allow to produce a (corrupted) executable.
Reviewers: ruiu, grimar, espindola
Reviewed By: grimar
Subscribers: Timmmm, jhenderson, emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D54651
llvm-svn: 347327
Summary:
At the beginning of `assignIndexes() function, when `FunctionIndex` and
`GlobalIndex` variables are created, `InputFunctions` and `InputGlobals`
vectors are guaranteed to be empty, because those vectors are only
populated in `assignIndexes()` function. Current code looks like they
are nonempty, so this patch deletes them for better readability.
Reviewers: sbc100
Subscribers: dschuff, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54687
llvm-svn: 347272
Summary: This patch implementation the handler for ARM_V4BX. This relocation is used by GNU runtime files and other armv4 applications.
Patch by Yin Ma
Reviewers: espindola, MaskRay, ruiu, peter.smith, pcc
Reviewed By: ruiu
Subscribers: yinma, pcc, peter.smith, MaskRay, rovka, efriedma, emaste, javed.absar, arichardson, kristof.beyls, chrib, llvm-commits
Differential Revision: https://reviews.llvm.org/D53444
llvm-svn: 347077
Current value using as a trap instruction (0xefefefef) is not a good choice
for MIPS because it's a valid MIPS instruction `swc3 $15,-4113(ra)`. This
patch replaces 0xefefefef by 0x04170001. For all MIPS ISA revisions before
R6, this value is just invalid instruction. Starting from MIPS R6 it's
a valid instruction `sigrie 1` which signals a Reserved Instruction exception.
mips-traps.s test case is added to test trap encoding. Other test cases
are modified to remove redundant checking.
Differential revision: https://reviews.llvm.org/D54154
llvm-svn: 347029
Remove the default initializer for TrapInstr; all subclasses overwrite
the defaults in their constructors anyway.
This fixes compilation errors like these, with GCC 5.4 on Ubuntu 16.04,
present since SVN r346893:
In file included from ../tools/lld/ELF/Arch/AArch64.cpp:12:0:
../tools/lld/ELF/Target.h:125:49: error: array must be initialized with a brace-enclosed initializer
std::array<uint8_t, 4> TrapInstr = {0, 0, 0, 0};
^
../tools/lld/ELF/Target.h:125:49: error: too many initializers for ‘std::array<unsigned char, 4ul>’
Differential Revision: https://reviews.llvm.org/D54569
llvm-svn: 346934
The uint32_t type does not clearly convey that these fields are interpreted
in the target endianness. Converting them to byte arrays should make this
more obvious and less error-prone.
Patch by James Clarke
Differential Revision: http://reviews.llvm.org/D54207
llvm-svn: 346893
On PowerPC64, when a function call offset is too large to encode in a call
instruction the address is stored in a table in the data segment. A thunk is
used to load the branch target address from the table relative to the
TOC-pointer and indirectly branch to the callee. When linking position-dependent
code the addresses are stored directly in the table, for position-independent
code the table is allocated and filled in at load time by the dynamic linker.
For position-independent code the branch targets could have gone in the .got.plt
but using the .branch_lt section for both position dependent and position
independent binaries keeps it consitent and helps keep this PPC64 specific logic
seperated from the target-independent code handling the .got.plt.
Differential Revision: https://reviews.llvm.org/D53408
llvm-svn: 346877
The R_AARCH64_ADR_PREL_PG_HI21 relocation type is given the R_PAGE_PC
RelExpr. This can be transformed to R_PLT_PAGE_PC via toPlt().
Unfortunately the resolution is identical to R_PAGE_PC so instead of
getting the address of the PLT entry we get the address of the symbol
which may not be correct in the case of static ifuncs. The fix is to
handle the cases separately and use getPltVA() + A with R_PLT_PAGE_PC.
Differential Revision: https://reviews.llvm.org/D54474
llvm-svn: 346863
- Make mergeSymbolRecords a method of PDBLinker to reduce the number of
parameters it needs.
- Remove a stale FIXME comment about error handling. We already drop
unknown symbol records, log them, and continue.
- Update a comment about why we're copying the symbol record. We do it
to realign the record. We can already mutate the symbol record memory,
it's memory allocated by relocateDebugChunk.
- Avoid the extra `CVSymbol NewSym` variable. We can mutate Sym in
place, which is best, since we're mutating the underlying record anyway.
llvm-svn: 346817
gdb-index-multiple-cu-2.s puts the symbol in question to another object file %t1.o, so that its CuIndex is affected by the number of CUs in %t.o
Also change `Kind:` in a comment to `Attributes:` as a follow-up of D54480 and D54481
llvm-svn: 346796
Summary:
NameTypeEntry::Type is a bit-packed value of CU index+attributes (https://sourceware.org/gdb//onlinedocs/gdb/Index-Section-Format.html), which is named cu_index_and_attrs in a local variable in gdb/dwarf2read.c:dw2_symtab_iter_next
The new name CuIndexAndAttrs is more meaningful.
Reviewers: ruiu, dblaikie, espindola
Reviewed By: dblaikie
Subscribers: emaste, aprantl, arichardson, JDevlieghere, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54481
llvm-svn: 346794
Summary:
Idx passed to readPubNamesAndTypes was an index into Chunks, not an
index into the CU list. This would be incorrect if some .debug_info
section contained more than 1 DW_TAG_compile_unit.
In real world, glibc Scrt1.o is a partial link of start.os abi-note.o init.o and contains 2 CUs in debug builds.
Without this patch, any application linking such Scrt1.o would have invalid .gdb_index
The issue could be demonstrated by:
(gdb) py print(gdb.lookup_global_symbol('main'))
None
Reviewers: espindola, ruiu
Reviewed By: ruiu
Subscribers: Higuoxing, grimar, dblaikie, emaste, aprantl, arichardson, JDevlieghere, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54361
llvm-svn: 346747
Summary:
The debug_info_offset value may be relocated.
This is lld side change of D54375.
Reviewers: ruiu, dblaikie, grimar, espindola
Subscribers: emaste, arichardson, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D54376
llvm-svn: 346616
`--no-demangle` now also applies to the name section. This change
was motivated by the rust team that have a slightly different name
mangling scheme to the standard C++ itanium one and prefer to do their
de-mangling as a post-link setp.
Patch by Alex Crichton!
Differential Revision: https://reviews.llvm.org/D54279
llvm-svn: 346516
Summary:
Reuse the "referenced by" note diagnostic code that we already use for
undefined symbols. In my case, it turned this:
lld-link: error: relocation against symbol in discarded section: .text
lld-link: error: relocation against symbol in discarded section: .text
...
Into this:
lld-link: error: relocation against symbol in discarded section: .text
>>> referenced by libANGLE.lib(CompilerGL.obj):(.SCOVP$M)
>>> referenced by libANGLE.lib(CompilerGL.obj):(.SCOVP$M)
...
lld-link: error: relocation against symbol in discarded section: .text
>>> referenced by obj/third_party/angle/libGLESv2/entry_points_egl_ext.obj:(.SCOVP$M)
>>> referenced by obj/third_party/angle/libGLESv2/entry_points_egl_ext.obj:(.SCOVP$M)
...
I think the new output is more useful.
Reviewers: ruiu, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54240
llvm-svn: 346427
Summary:
D53821 fixed the bogus MSVC (at least 2017) C4146 warning (unary minus applied on unsigned type)
by using std::numeric_limits<int32_t>::min().
The warning was because -2147483648 is incorrectly treated as unsigned long instead of long long)
Let's use INT32_MIN which is arguably more readable.
Note, on GCC or clang, -0x80000000 works fine (ILP64: long, LP64: long long).
Reviewers: ruiu, jhenderson, sfertile, espindola
Reviewed By: sfertile
Subscribers: emaste, nemanjai, arichardson, kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54200
llvm-svn: 346356
Used for WebAssembly threads proposal. Add a flag --shared-memory
which sets the IS_SHARED bit in WasmLimits
Differential Revision: https://reviews.llvm.org/D54130
llvm-svn: 346248
Summary: llvm-readobj/readelf accepts both -s and -S as aliases for --sections. However with GNU readelf only -S means --section, and -s means --symbols. I would like to make llvm-readelf more compatible.
Reviewers: MaskRay, espindola
Reviewed By: MaskRay
Subscribers: emaste, arichardson, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D54118
llvm-svn: 346164
This change allows for link-time merging of debugging information from
Microsoft precompiled types OBJs compiled with cl.exe /Z7 /Yc and /Yu.
This fixes llvm.org/PR34278
Differential Revision: https://reviews.llvm.org/D45213
llvm-svn: 346154
Summary:
It is difficult to touch a file with a relative mtime across different OSes as POSIX touch -d is rigid. While we may construct relative timestamps with `date`, POSIX date is inadequate to do so as various OSes' date do not agree on a common format (OpenBSD uses `date -r seconds`, FreeBSD uses `date -v-2M` while GNU accepts `-d '-2 min'`)
Just use python os.utime()
Original description:
The case may randomly fail if we test it with command "
while llvm-lit tools/lld/test/ELF/lto/cache.ll; do true; done". It is because the llvmcache-foo file is younger than llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6. But due to timestamp precision reason their timestamp is the same. Given the same timestamp, the file prune policy is to remove bigger size file first, so mostly foo file is removed for its bigger size. And the files size is under threshold after deleting foo file. That's what test case expect.
However sometimes, the precision is enough to measure that timestamp of llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6 are smaller than foo, so llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6 are deleted first. Since the files size is still above the file size threshold after deleting the 2 files, the foo file is also deleted. And then the test case fails, because it expect only one file should be deleted instead of 3.
The fix is to change the timestamp of llvmcache-foo file to meet the thinLTO prune policy.
The same fix is applied to llvm code at https://reviews.llvm.org/D52452.
Patch by Luo Yuanke.
Reviewers: ruiu, craig.topper, smaslov, Jianping, espindola, LuoYuanke, tejohnson
Reviewed By: tejohnson
Subscribers: sbc100, krytarowski, aheejin, llvm-commits, dexonsmith, steven_wu, arichardson, inglorion, emaste, bjope, rupprecht
Differential Revision: https://reviews.llvm.org/D54039
llvm-svn: 346006
Summary:
The case may randomly fail if we test it with command "
while llvm-lit tools/lld/test/ELF/lto/cache.ll; do true; done". It is because the llvmcache-foo file is younger than llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6. But due to timestamp precision reason their timestamp is the same. Given the same timestamp, the file prune policy is to remove bigger size file first, so mostly foo file is removed for its bigger size. And the files size is under threshold after deleting foo file. That's what test case expect.
However sometimes, the precision is enough to measure that timestamp of llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6 are smaller than foo, so llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6 are deleted first. Since the files size is still above the file size threshold after deleting the 2 files, the foo file is also deleted. And then the test case fails, because it expect only one file should be deleted instead of 3.
The fix is to change the timestamp of llvmcache-foo file to meet the thinLTO prune policy.
The same fix is applied to llvm code at https://reviews.llvm.org/D52452.
Patch by Luo Yuanke.
Reviewers: ruiu, craig.topper, smaslov, Jianping, espindola, LuoYuanke
Subscribers: rupprecht, bjope, emaste, inglorion, arichardson, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D53123
llvm-svn: 345977
Summary:
D52830 sets sh_link to .symtab in static link, which breaks executable stripped by GNU strip.
It may also be odd that .rela.plt (SHF_ALLOC) points to .symtab (non-SHF_ALLOC).
Change the logic on pcc's suggestion.
Before:
% clang -fuse-ld=lld -static -xc =(printf 'int main(){}') # or gcc
% strip a.out; ./a.out
unexpected reloc type in static binary[1] 61634 segmentation fault ./a.out
Reviewers: ruiu, grimar, emaste, espindola
Reviewed By: ruiu
Subscribers: pcc, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53993
llvm-svn: 345899
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
This is https://bugs.llvm.org/show_bug.cgi?id=39493.
We crashed previously because did not handle /DISCARD/ properly
when -r was used. I think it is uncommon to use scripts with -r, though I see
nothing wrong to handle the /DISCARD/ so that we will not crash at least.
Differential revision: https://reviews.llvm.org/D53864
llvm-svn: 345819
Summary:
There are really three different kinds of TLS layouts:
* A fixed TLS-to-TP offset. On architectures like PowerPC, MIPS, and
RISC-V, the thread pointer points to a fixed offset from the start
of the executable's TLS segment. The offset is 0x7000 for PowerPC
and MIPS, which allows a signed 16-bit offset to reach 0x1000 of
per-thread implementation data and 0xf000 of the application's TLS
segment. The size and layout of the TCB isn't relevant to the static
linker and might not be known.
* A fixed TCB size. This is the format documented as "variant 1" in
Ulrich Drepper's TLS spec. The thread pointer points to a 2-word TCB
followed by the executable's TLS segment. The first word is always
the DTV pointer. Used on ARM. The thread pointer must be aligned to
the TLS segment's alignment, possibly creating alignment padding.
* Variant 2. This format predates variant 1 and is also documented in
Drepper's TLS spec. It allocates the executable's TLS segment before
the thread pointer, apparently for backwards-compatibility. It's
used on x86 and SPARC.
Factor out an lld:🧝:getTlsTpOffset() function for use in a
follow-up patch for Android. The TcbSize/TlsTpOffset fields are only used
in getTlsTpOffset, so replace them with a switch on Config->EMachine.
Reviewers: espindola, ruiu, PkmX, jrtc27
Reviewed By: ruiu, PkmX, jrtc27
Subscribers: jyknight, emaste, sdardis, nemanjai, javed.absar, arichardson, kristof.beyls, kbarton, fedor.sergeev, atanasyan, PkmX, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D53905
llvm-svn: 345775
Summary: .rela.plt may only contain R_*_{,I}RELATIVE relocations and not need a symbol table link. bfd/gold fallbacks to sh_link=0 in this case. Without this patch, ld.lld --strip-all caused lld to dereference a null pointer.
Reviewers: ruiu, grimar, espindola
Reviewed By: ruiu
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53881
llvm-svn: 345648
Visual Studio has a bug where it converts the integer literal 2147483648
into an unsigned int instead of a long long (i.e. it follows C89 rules).
The bug has been reported as:
https://developercommunity.visualstudio.com/content/problem/141813/-2147483648-c4146-error.html.
Because of this bug, we were getting a signed/unsigned comparison
warning in VS2015 from the old code (the subsequent unary negation had
no effect on the type).
Reviewed by: sfertile
Differential Revision: https://reviews.llvm.org/D53821
llvm-svn: 345579
Summary: There are too many reasonable cases that would be considered unorderable.
Reviewers: ruiu, espindola, Bigcheese
Reviewed By: ruiu
Subscribers: grimar, emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53669
llvm-svn: 345322
Out::DebugInfo was used only by GdbIndex class to determine if
we need to create a .gdb_index section, but we can do the same
check without it.
Added a test that this patch doesn't change the existing behavior.
llvm-svn: 345058
Summary:
During upgrading of the FreeBSD source tree with lld 7.0.0, I noticed
that it started complaining about `crt1.o` having an "index past the
end of the symbol table".
Such a symbol table looks approximately like this, viewed with `readelf
-s` (note the `Ndx` field being messed up):
```
Symbol table '.symtab' contains 4 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000000 0 SECTION LOCAL DEFAULT 1
2: 00000000 0 NOTYPE WEAK HIDDEN RSV[0xffff] __rel_iplt_end
3: 00000000 0 NOTYPE WEAK HIDDEN RSV[0xffff] __rel_iplt_start
```
At first, it seemed that recent ifunc relocation work had caused this:
<https://reviews.freebsd.org/rS339351>, but it turned out that it was
due to incorrect processing of the object files by lld, when using `-r`
(a.k.a. --relocatable).
Bisecting showed that rL324421 ("Convert a use of Config->Static") was
the commit where this new behavior began. Simply reverting it solved
the issue, and the `__rel_iplt` symbols had an index of `UND` again.
Looking at Rafael's commit message, I think he simply missed the
possibility of `--relocatable` being in effect, so I have added an
additional check for it.
I also added a simple regression test case.
Reviewers: grimar, ruiu, emaste, espindola
Reviewed By: ruiu
Subscribers: arichardson, krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D53515
llvm-svn: 345002
emulation.s is testing multiple architectures, which means it needs all
the corresponding backends enabled, which might not be true for all
developers (for example, I don't have PPC or MIPS enabled). Rather than
marking the entire test as unsupported for such developers, split it up
per backend to get better testing granularity.
Differential Revision: https://reviews.llvm.org/D53544
llvm-svn: 344986
Turns out I wasn't actually running this test locally, since I don't
build the PPC and MIPS backends. Whoops.
Perhaps this test should be split up per-architecture?
llvm-svn: 344980
We need this to support 32-bit ARM. Add test cases for emulation
handling for this architecture as well.
Differential Revision: https://reviews.llvm.org/D53539
llvm-svn: 344976
Summary:
Before, superfluous warnings were emitted for the following two cases:
1) When from symbol was in a discarded section.
The profile should be thought of as affiliated to the section.
It makes sense to ignore the profile if the section is discarded.
2) When to symbol was in a shared object.
The object file containing the profile may not know about the to
symbol, which can reside in another object file (useful profile) or a
shared object (not useful as symbols in the shared object are fixed
and unorderable). It makes sense to ignore the profile from the object
file.
Note, the warning when to symbol was undefined was suppressed in
D53044, which is still useful for --symbol-ordering-file=
This patch silences the warnings. The check is actually more relaxed (no
warnings if either From or To is not Defined) for simplicity and I don't
see a compelling reason to warn on more cases.
Reviewers: ruiu, davidxl, espindola, Bigcheese
Reviewed By: ruiu
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53470
llvm-svn: 344974
This patch adds a support for OUTPUT_FORMAT linker script directive.
Since I'm not 100% confident with BFD names you can use in the directive
for all architectures, I added only a few in this patch. We can add
other names for other archtiectures later.
We still do not support triple-style OUTPUT_FORMAT directive, namely,
OUTPUT_FORMAT(bfdname, big, little). If you pass -EL (little endian)
or -EB (big endian) to the linker, GNU linkers pick up big or little
as a BFD name, correspondingly, so that you can use a single linker
script for bi-endian processor. I'm not sure if we really need to
support that, so I'll leave it alone for now.
Note that -m takes precedence over OUTPUT_FORAMT, but we always parse
a BFD name given to OUTPUT_FORMAT for error checking. You cannot write
an invalid name in the OUTPUT_FORMAT directive.
Differential Revision: https://reviews.llvm.org/D53495
llvm-svn: 344952
Summary:
SymbolTable::addAbsolute() was removed in rL344305.
To me this is more readable than the lambda named `Add` and in our
out-of-tree CHERI target we use addAbsolute() in another function.
Reviewers: ruiu, espindola
Reviewed By: ruiu
Subscribers: kristina, emaste, llvm-commits
Differential Revision: https://reviews.llvm.org/D53393
llvm-svn: 344842
Normally one wouldn't run into that case, but it is possible with
a little creative ordering of special libraries.
Differential Revision: https://reviews.llvm.org/D53388
llvm-svn: 344776
Adjusted the range check on a call instruction from 24 bits signed to
26 bits signed. While the instruction only encodes 24 bits, the target is
assumed to be 4 byte aligned, and the value that is encoded in the instruction
gets shifted left by 2 to form the offset. Also added a check that the offset is
indeed at least 4 byte aligned.
Differential Revision: https://reviews.llvm.org/D53401
llvm-svn: 344747
All the PassBuilder::parse interfaces now return descriptive StringError
instead of a plain bool. It allows to make -passes/aa-pipeline parsing
errors context-specific and thus less confusing.
TODO: ideally we should also make suggestions for misspelled pass names,
but that requires some extensions to PassBuilder.
Reviewed By: philip.pfaffe, chandlerc
Differential Revision: https://reviews.llvm.org/D53246
llvm-svn: 344685
Recommitting https://reviews.llvm.org/rL344544 after fixing undefined behavior
from left-shifting a negative value. Original commit message:
This support is slightly different then the X86_64 implementation in that calls
to __morestack don't need to get rewritten to calls to __moresatck_non_split
when a split-stack caller calls a non-split-stack callee. Instead the size of
the stack frame requested by the caller is adjusted prior to the call to
__morestack. The size the stack-frame will be adjusted by is tune-able through a
new --split-stack-adjust-size option.
llvm-svn: 344622
This reverts commit https://reviews.llvm.org/rL344544, which causes failures on
a undefined behaviour sanitizer bot -->
lld/ELF/Arch/PPC64.cpp:849:35: runtime error: left shift of negative value -1
llvm-svn: 344551
This support is slightly different then the X86_64 implementation in that calls
to __morestack don't need to get rewritten to calls to __moresatck_non_split
when a split-stack caller calls a non-split-stack callee. Instead the size of
the stack frame requested by the caller is adjusted prior to the call to
__morestack. The size the stack-frame will be adjusted by is tune-able through a
new --split-stack-adjust-size option.
Differential Revision: https://reviews.llvm.org/D52099
llvm-svn: 344544
This is https://bugs.llvm.org/show_bug.cgi?id=39289.
Currently both gold and bfd report errors about invalid options values
even with -v/-versions. But LLD does not.
This makes complicated to check the options available when LLD is used.
Patch makes LLD behavior to be consistent with GNU linkers.
Differential revision: https://reviews.llvm.org/D53278
llvm-svn: 344514
`Type` parameter was used only to check for TLS attribute mismatch,
but we can do that when we actually replace symbols, so we don't need
to type as an argument. This change should simplify the interface of
the symbol table a bit.
llvm-svn: 344394
This a resubmission of a patch which was previously reverted
due to breaking several lld tests. The issues causing those
failures have been fixed, so the patch is now resubmitted.
---Original Commit Message---
While it doesn't make a *ton* of sense for POSIX paths to be
in PDBs, it's possible to occur in real scenarios involving
cross compilation.
The tools need to be able to handle this, because certain types
of debugging scenarios are possible without a running process
and so don't necessarily require you to be on a Windows system.
These include post-mortem debugging and binary forensics (e.g.
using a debugger to disassemble functions and examine symbols
without running the process).
There's changes in clang, LLD, and lldb in this patch. After
this the cross-platform disassembly and source-list tests pass
on Linux.
Furthermore, the behavior of LLD can now be summarized by a much
simpler rule than before: Unless you specify /pdbsourcepath and
/pdbaltpath, the PDB ends up with paths that are valid within
the context of the machine that the link is performed on.
Differential Revision: https://reviews.llvm.org/D53149
llvm-svn: 344377
If you have the string /usr/bin, prior to this patch it would not
be quoted by our YAML serializer. But a string like C:\src would
be, due to the presence of a backslash. This makes the quoting
rules of basically every single file path different depending on
the path syntax (posix vs. Windows).
While technically not required by the YAML specification to quote
forward slashes, when the behavior of paths is inconsistent it
makes it difficult to portably write FileCheck lines that will
work with either kind of path.
Differential Revision: https://reviews.llvm.org/D53169
llvm-svn: 344359
This reverts commit b86c16ad8c97dadc1f529da72a5bb74e9eaed344.
This is being reverted because I forgot to write a useful
commit message, so I'm going to resubmit it with an actual
commit message.
llvm-svn: 344358
Android uses a compressed relocation format, which means the size of the
relocation section isn't predictable based on the number of relocations,
and can vary if the layout changes in any way. To deal with this, the
linker normally runs multiple passes until the layout converges.
The layout should converge if the size of the compressed
relocation section increases monotonically: if the size of an encoded
offset increases by one byte, the larget value which can be encoded is
multiplied by 128, so the representable offsets grow much faster than
the size of the section itself.
The problem here is that there is no code to ensure the size of the
section doesn't decrease. If the size of the relocation section
decreases, the relative offsets can increase due to alignment
restrictions, so that can force the size of the relocation section to
increase again. The end result is an infinite loop; the loop gets cut
off after 10 iterations with the message "thunk creation not
converged".
To avoid this issue, this patch adds padding to the end of the
relocation section if its size would decrease. The extra
padding is harmless because of the way the format is defined:
decoding stops after it reaches the number of relocations specified
in the section's header.
Differential Revision: https://reviews.llvm.org/D53003
llvm-svn: 344300
This was originally causing some test failures on non-Windows
platforms, which required fixes in the compiler and linker. After
those fixes, however, other tests started failing. Reverting
temporarily until I can address everything.
llvm-svn: 344279
While it doesn't make a *ton* of sense for POSIX paths to be
in PDBs, it's possible to occur in real scenarios involving
cross compilation.
The tools need to be able to handle this, because certain types
of debugging scenarios are possible without a running process
and so don't necessarily require you to be on a Windows system.
These include post-mortem debugging and binary forensics (e.g.
using a debugger to disassemble functions and examine symbols
without running the process).
There's changes in clang, LLD, and lldb in this patch. After
this the cross-platform disassembly and source-list tests pass
on Linux.
Furthermore, the behavior of LLD can now be summarized by a much
simpler rule than before: Unless you specify /pdbsourcepath and
/pdbaltpath, the PDB ends up with paths that are valid within
the context of the machine that the link is performed on.
Differential Revision: https://reviews.llvm.org/D53149
llvm-svn: 344269
When these are accessed with load/store instructions on ARM64,
it becomes strictly necessary to have them properly aligned.
This fixes PR39228.
Differential Revision: https://reviews.llvm.org/D53128
llvm-svn: 344264
This is https://bugs.llvm.org/show_bug.cgi?id=37538,
Currently, LLD may set both sh_link and sh_info for
.rela.plt section to zero when we have only .rela.iplt section part used.
ELF spec (https://docs.oracle.com/cd/E19683-01/816-1386/chapter6-94076/index.html)
says that for SHT_REL and SHT_RELA, sh_link references the associated symbol table
and sh_info the "section to which the relocation applies."
When we set the sh_link field, for the regular case we use the .dynsym index.
For .rela.iplt sections, it is unclear what is the associated symbol table,
because R_*_RELATIVE relocations do not use symbol names and we might have no
.dynsym section at all so this patch uses .symtab section index.
Differential revision: https://reviews.llvm.org/D52830
llvm-svn: 344226
Summary:
Add a condition UnresolvedPolicy::Ignore to elf::warnUnorderedSymbol to suppress Sym->isUndefined() warnings from both
1) --symbol-ordering-file=
2) .llvm.call-graph-profile
If --unresolved-symbols=ignore-all is used,
no "undefined symbol" error/warning is emitted. It makes sense to not warn unorderable symbols.
Otherwise,
If an executable is linked, the default policy UnresolvedPolicy::ErrorOrWarn will issue a "undefined symbol" error. The unorderable symbol warning is redundant.
If a shared object is linked, it is possible that only part of object files are used and some symbols are left undefined. The warning is not very necessary.
In particular for .llvm.call-graph-profile, when linking a shared object, a call graph profile may contain undefined symbols. This case generated a warning before but it will be suppressed by this patch.
Reviewers: ruiu, davidxl, espindola
Reviewed By: ruiu
Subscribers: grimar, emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53044
llvm-svn: 344195
This allows using #pragma comment(lib, "foo") in MinGW built code,
if built with -fms-extensions. (This works for system libraries and
static libraries only, as it doesn't try to look for .dll.a. As
ld.bfd doesn't support embedded defaultlib directives, this isn't
in widespread use among mingw users.)
Differential Revision: https://reviews.llvm.org/D53017
llvm-svn: 344124
This is necessary for handling defaultlib directives embedded in
object files, unless they use an absolute path.
Differential Revision: https://reviews.llvm.org/D53015
llvm-svn: 344123
Summary: Before, OptTable::PrintHelp append "[options] <inputs>" to its parameter `Help`. It is more flexible to change its semantic to `Usage` and let user customize the usage line.
Reviewers: rupprecht, ruiu, espindola
Reviewed By: rupprecht
Subscribers: emaste, sbc100, arichardson, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D53054
llvm-svn: 344099
Alexandre Ganea