Summary:
Removes duplicated SIMD loads and store instructions and removes
patterns involving GlobalAddresses that were not used in any tests.
Reviewers: aheejin, sunfish
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67783
llvm-svn: 372648
This removes the need for ConvertToTarget opcodes in the isel table.
It's also consistent with the recent changes to use TargetConstant
for intrinsic nodes that always take immediates.
Differential Revision: https://reviews.llvm.org/D67902
llvm-svn: 372645
Remove any predicate that we replace with a vctp intrinsic, and try
to remove their operands too. Also look into the exit block to see if
there's any duplicates of the predicates that we've replaced and
clone the vctp to be used there instead.
Differential Revision: https://reviews.llvm.org/D67709
llvm-svn: 372567
Try to generate ushll/sshll for aarch64_neon_ushl/aarch64_neon_sshl,
if their first operand is extended and the second operand is a constant
Also adds a few tests marked with FIXME, where we can further increase
codegen.
Reviewers: t.p.northover, samparker, dmgreen, anemet
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D62308
llvm-svn: 372565
Check whether there are any uses or defs between the LoopDec and
LoopEnd. If there's not, then we can use a subs to set the cpsr and
skip generating a cmp.
Differential Revision: https://reviews.llvm.org/D67801
llvm-svn: 372560
CC_Mips doesn't accept vararg functions for O32, so we have to explicitly
use CC_Mips_FixedArg.
For lowerCall we now properly figure out whether callee function is vararg
or not, this has no effect for O32 since we always use CC_Mips_FixedArg.
For lower formal arguments we need to copy arguments in register to stack
and save pointer to start for argument list into MipsMachineFunction
object so that G_VASTART could use it during instruction select.
For vacopy we need to copy content from one vreg to another,
load and store are used for that purpose.
Differential Revision: https://reviews.llvm.org/D67756
llvm-svn: 372555
The attached test case would previous infinite loop after
r365711.
I'm going to move this to X86ISelDAGToDAG.cpp to get the setcc
to match VPTEST in 32-bit mode in a follow up commit.
llvm-svn: 372543
This allows us to use timm in the isel table which is more
consistent with other intrinsics that take an immediate now.
We can't declare the intrinsic as taking an ImmArg because we
need to match non-constants to the shift by MMX register
instruction which we do by mutating the intrinsic id during
lowering.
llvm-svn: 372537
This intrinsics should be shift by immediate, but gcc allows any
i32 scalar and clang needs to match that. So we try to detect the
non-constant case and move the data from an integer register to an
MMX register.
Previously this was done by creating a v2i32 build_vector and
bitcast in SelectionDAGBuilder. This had to be done early since
v2i32 isn't a legal type. The bitcast+build_vector would be DAG
combined to X86ISD::MMX_MOVW2D which isel will turn into a
GPR->MMX MOVD.
This commit just moves the whole thing to lowering and emits
the X86ISD::MMX_MOVW2D directly to avoid the illegal type. The
test changes just seem to be due to nodes being linearized in a
different order.
llvm-svn: 372535
Summary:
PR43381 notes that while we are good at matching `(X >> C1) & C2` as BEXTR/BEXTRI,
we only do that if we either have BEXTRI (TBM),
or if BEXTR is marked as being fast (`-mattr=+fast-bextr`).
In all other cases we don't match.
But that is mainly only true for AMD CPU's.
However, for all the CPU's for which we have sched models,
the BZHI is always fast (or the sched models are all bad.)
So if we decide that it's unprofitable to emit BEXTR/BEXTRI,
we should consider falling-back to BZHI if it is available,
and follow-up with the shift.
While it's really tempting to do something because it's cool
it is wise to first think whether it actually makes sense to do.
We shouldn't just use BZHI because we can, but only it it is beneficial.
In particular, it isn't really worth it if the input is a register,
mask is small, or we can fold a load.
But it is worth it if the mask does not fit into 32-bits.
(careful, i don't know much about intel cpu's, my choice of `-mcpu` may be bad here)
Thus we manage to fold a load:
https://godbolt.org/z/Er0OQz
Or if we'd end up using BZHI anyways because the mask is large:
https://godbolt.org/z/dBJ_5h
But this isn'r actually profitable in general case,
e.g. here we'd increase microop count
(the register renaming is free, mca does not model that there it seems)
https://godbolt.org/z/k6wFoz
Likewise, not worth it if we just get load folding:
https://godbolt.org/z/1M1deGhttps://bugs.llvm.org/show_bug.cgi?id=43381
Reviewers: RKSimon, craig.topper, davezarzycki, spatel
Reviewed By: craig.topper, davezarzycki
Subscribers: andreadb, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67875
llvm-svn: 372532
The static analyzer is warning about a potential null dereference, but we should be able to use cast<LoadSDNode> directly and if not assert will fire for us.
llvm-svn: 372528
We're now using a lot more TargetConstant nodes in SelectionDAG.
But we were still telling isel to convert some of them
to TargetConstants even though they already are. This is because
isel emits a conversion anytime the output pattern has a an 'imm'.
I guess for patterns in instructions we take the 'timm' from the
'set' pattern, but for Pat patterns with explcicit output we
previously had to say 'imm' since 'timm' wasn't allowed in outputs.
llvm-svn: 372525
The static analyzer is warning about potential null dereferences, but we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 372507
We were already doing this dyn_cast && isa<> && cast<> pattern for some add*Operands methods, just do this more consistently to stop clang static analyzer warning so much.
llvm-svn: 372503
The static analyzer is warning about potential null dereferences, but we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 372500
The static analyzer is warning about potential null dereference, but we should be able to use cast<ConstantFPSDNode> directly and if not assert will fire for us.
llvm-svn: 372499
We are missing costs for a lot of truncation cases, I'm hoping to address all the 'zero cost' cases in trunc.ll
I thought this was a vector widening side effect, but even before this we had some interesting LV decisions (notably over indvars) being made due to these zero costs.
llvm-svn: 372498
Recommit: fix asan errors.
The way MachinePipeliner uses these target hooks is stateful - we reduce trip
count by one per call to reduceLoopCount. It's a little overfit for hardware
loops, where we don't have to worry about stitching a loop induction variable
across prologs and epilogs (the induction variable is implicit).
This patch introduces a new API:
/// Analyze loop L, which must be a single-basic-block loop, and if the
/// conditions can be understood enough produce a PipelinerLoopInfo object.
virtual std::unique_ptr<PipelinerLoopInfo>
analyzeLoopForPipelining(MachineBasicBlock *LoopBB) const;
The return value is expected to be an implementation of the abstract class:
/// Object returned by analyzeLoopForPipelining. Allows software pipelining
/// implementations to query attributes of the loop being pipelined.
class PipelinerLoopInfo {
public:
virtual ~PipelinerLoopInfo();
/// Return true if the given instruction should not be pipelined and should
/// be ignored. An example could be a loop comparison, or induction variable
/// update with no users being pipelined.
virtual bool shouldIgnoreForPipelining(const MachineInstr *MI) const = 0;
/// Create a condition to determine if the trip count of the loop is greater
/// than TC.
///
/// If the trip count is statically known to be greater than TC, return
/// true. If the trip count is statically known to be not greater than TC,
/// return false. Otherwise return nullopt and fill out Cond with the test
/// condition.
virtual Optional<bool>
createTripCountGreaterCondition(int TC, MachineBasicBlock &MBB,
SmallVectorImpl<MachineOperand> &Cond) = 0;
/// Modify the loop such that the trip count is
/// OriginalTC + TripCountAdjust.
virtual void adjustTripCount(int TripCountAdjust) = 0;
/// Called when the loop's preheader has been modified to NewPreheader.
virtual void setPreheader(MachineBasicBlock *NewPreheader) = 0;
/// Called when the loop is being removed.
virtual void disposed() = 0;
};
The Pipeliner (ModuloSchedule.cpp) can use this object to modify the loop while
allowing the target to hold its own state across all calls. This API, in
particular the disjunction of creating a trip count check condition and
adjusting the loop, improves the code quality in ModuloSchedule.cpp.
llvm-svn: 372463
Previously we only matched scalar_to_vector and scalar load, but
we should be able to narrow a vector load or match vzload.
Also need to match TargetConstant instead of Constant. The register
patterns were previously updated, but not the memory patterns.
llvm-svn: 372458
I believe all of the uniform/divergent pattern predicates are
redundant and can be removed. The uniformity bit already influences
the register class, and nothhing has broken when I've removed this and
others.
llvm-svn: 372450
The recently announced IBM z15 processor implements the architecture
already supported as "arch13" in LLVM. This patch adds support for
"z15" as an alternate architecture name for arch13.
The patch also uses z15 in a number of places where we used arch13
as long as the official name was not yet announced.
llvm-svn: 372435
We always(and only) check the NLP flag after calling
classifyGlobalReference to see whether it is accessed
indirectly.
Refactor to code to use isGVIndirectSym instead.
llvm-svn: 372417
Summary:
After the switch in SimplifyDemandedBits, it tries to create a
constant when possible. If the original node is a TargetConstant
the default in the switch will call computeKnownBits on the
TargetConstant which will succeed. This results in the
TargetConstant becoming a Constant. But TargetConstant exists to
avoid being changed.
I've fixed the two cases that relied on this in tree by explicitly
making the nodes constant instead of target constant. The Sparc
case is an old bug. The Mips case was recently introduced now that
ImmArg on intrinsics gets turned into a TargetConstant when the
SelectionDAG is created. I've removed the ImmArg since it lowers
to generic code.
Reviewers: arsenm, RKSimon, spatel
Subscribers: jyknight, sdardis, wdng, arichardson, hiraditya, fedor.sergeev, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67802
llvm-svn: 372409
This patch adds the patterns to select the dot product instructions.
Tested on aarch64-linux with make check-all.
Differential Revision: https://reviews.llvm.org/D67645
llvm-svn: 372408
My toolchain stopped working (LLVM 8.0 , libstdc++ 5.4.0) after
r372338.
The same problem was seen in clang-cuda-build buildbots:
clang-cuda-build/llvm/lib/Target/AMDGPU/AMDGPUInstructionSelector.cpp:763:12:
error: chosen constructor is explicit in copy-initialization
return {Reg, 0, nullptr};
^~~~~~~~~~~~~~~~~
/usr/bin/../lib/gcc/x86_64-linux-gnu/5.4.0/../../../../include/c++/5.4.0/tuple:479:19:
note: explicit constructor declared here
constexpr tuple(_UElements&&... __elements)
^
This commit adds explicit calls to std::make_tuple to work around
the problem.
llvm-svn: 372384
This reverts commit 52621307bc.
Tests have been failing all night with
[0/2] ACTION //llvm/test:check-llvm(//llvm/utils/gn/build/toolchain:unix)
-- Testing: 33647 tests, 64 threads --
Testing: 0 .. 10..
UNRESOLVED: LLVM :: CodeGen/AMDGPU/GlobalISel/isel-blendi-gettargetconstant.ll (6943 of 33647)
******************** TEST 'LLVM :: CodeGen/AMDGPU/GlobalISel/isel-blendi-gettargetconstant.ll' FAILED ********************
Test has no run line!
********************
Since there were other concerns on https://reviews.llvm.org/D67785,
I'm just reverting for now.
llvm-svn: 372383
The way MachinePipeliner uses these target hooks is stateful - we reduce trip
count by one per call to reduceLoopCount. It's a little overfit for hardware
loops, where we don't have to worry about stitching a loop induction variable
across prologs and epilogs (the induction variable is implicit).
This patch introduces a new API:
/// Analyze loop L, which must be a single-basic-block loop, and if the
/// conditions can be understood enough produce a PipelinerLoopInfo object.
virtual std::unique_ptr<PipelinerLoopInfo>
analyzeLoopForPipelining(MachineBasicBlock *LoopBB) const;
The return value is expected to be an implementation of the abstract class:
/// Object returned by analyzeLoopForPipelining. Allows software pipelining
/// implementations to query attributes of the loop being pipelined.
class PipelinerLoopInfo {
public:
virtual ~PipelinerLoopInfo();
/// Return true if the given instruction should not be pipelined and should
/// be ignored. An example could be a loop comparison, or induction variable
/// update with no users being pipelined.
virtual bool shouldIgnoreForPipelining(const MachineInstr *MI) const = 0;
/// Create a condition to determine if the trip count of the loop is greater
/// than TC.
///
/// If the trip count is statically known to be greater than TC, return
/// true. If the trip count is statically known to be not greater than TC,
/// return false. Otherwise return nullopt and fill out Cond with the test
/// condition.
virtual Optional<bool>
createTripCountGreaterCondition(int TC, MachineBasicBlock &MBB,
SmallVectorImpl<MachineOperand> &Cond) = 0;
/// Modify the loop such that the trip count is
/// OriginalTC + TripCountAdjust.
virtual void adjustTripCount(int TripCountAdjust) = 0;
/// Called when the loop's preheader has been modified to NewPreheader.
virtual void setPreheader(MachineBasicBlock *NewPreheader) = 0;
/// Called when the loop is being removed.
virtual void disposed() = 0;
};
The Pipeliner (ModuloSchedule.cpp) can use this object to modify the loop while
allowing the target to hold its own state across all calls. This API, in
particular the disjunction of creating a trip count check condition and
adjusting the loop, improves the code quality in ModuloSchedule.cpp.
llvm-svn: 372376
We reuse an ISD opcode here that can be reached from BMI that
doesn't require it to be an immediate. Our isel patterns to match
the TBM immediate form require a Constant and not a TargetConstant.
We were accidentally getting the Constant due to a quirk of
combineBEXTR calling SimplifyDemandedBits. The call to
SimplifyDemandedBits ended up constant folding the TargetConstant
to a regular Constant. But we should probably instead be asserting
if SimplifyDemandedBits on a TargetConstant so we shouldn't rely
on this behavior.
llvm-svn: 372373
Summary: This fixes a crasher introduced by r372338.
Reviewers: echristo, arsenm
Subscribers: jvesely, wdng, nhaehnle, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67785
Tighten up the test case.
llvm-svn: 372366
The later code that generates a constant when there are
some non-const elements works basically the same and doesn't
require there to be any non-const elements.
llvm-svn: 372365
The function could return zero if an extreme number or
registers were used. Minimal possible occupancy is 1.
Differential Revision: https://reviews.llvm.org/D67771
llvm-svn: 372350
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This patch converts the DAGCombine isNegatibleForFree/GetNegatedExpression into overridable TLI hooks and includes a demonstration X86 implementation.
The intention is to let us extend existing FNEG combines to work more generally with negatible float ops, allowing it work with target specific combines and opcodes (e.g. X86's FMA variants).
Unlike the SimplifyDemandedBits, we can't just handle target nodes through a Target callback, we need to do this as an override to allow targets to handle generic opcodes as well. This does mean that the target implementations has to duplicate some checks (recursion depth etc.).
I've only begun to replace X86's FNEG handling here, handling FMADDSUB/FMSUBADD negation and some low impact codegen changes (some FMA negatation propagation). We can build on this in future patches.
Differential Revision: https://reviews.llvm.org/D67557
llvm-svn: 372333
As commented on D67557 we have a lot of uses of depth checks all using magic numbers.
This patch adds the SelectionDAG::MaxRecursionDepth constant and moves over some general cases to use this explicitly.
Differential Revision: https://reviews.llvm.org/D67711
llvm-svn: 372315
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
We needn't BFI each lane individually into a predicate register when each lane
in the same. A simple sign extend and a vmsr will do.
Differential Revision: https://reviews.llvm.org/D67653
llvm-svn: 372313
This needs special handling due to some subtargets that have a
nonstandard register layout for f16 vectors
Also reject some illegal types on other targets.
llvm-svn: 372293
Encode them directly as an imm argument to G_INTRINSIC*.
Since now intrinsics can now define what parameters are required to be
immediates, avoid using registers for them. Intrinsics could
potentially want a constant that isn't a legal register type. Also,
since G_CONSTANT is subject to CSE and legalization, transforms could
potentially obscure the value (and create extra work for the
selector). The register bank of a G_CONSTANT is also meaningful, so
this could throw off future folding and legalization logic for AMDGPU.
This will be much more convenient to work with than needing to call
getConstantVRegVal and checking if it may have failed for every
constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
immarg operands, many of which need inspection during lowering. Having
to find the value in a register is going to add a lot of boilerplate
and waste compile time.
SelectionDAG has always provided TargetConstant for constants which
should not be legalized or materialized in a register. The distinction
between Constant and TargetConstant was somewhat fuzzy, and there was
no automatic way to force usage of TargetConstant for certain
intrinsic parameters. They were both ultimately ConstantSDNode, and it
was inconsistently used. It was quite easy to mis-select an
instruction requiring an immediate. For SelectionDAG, start emitting
TargetConstant for these arguments, and using timm to match them.
Most of the work here is to cleanup target handling of constants. Some
targets process intrinsics through intermediate custom nodes, which
need to preserve TargetConstant usage to match the intrinsic
expectation. Pattern inputs now need to distinguish whether a constant
is merely compatible with an operand or whether it is mandatory.
The GlobalISelEmitter needs to treat timm as a special case of a leaf
node, simlar to MachineBasicBlock operands. This should also enable
handling of patterns for some G_* instructions with immediates, like
G_FENCE or G_EXTRACT.
This does include a workaround for a crash in GlobalISelEmitter when
ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372285
Summary:
Large slowdowns were observed in Rust due to many small, constant
sized copies in conjunction with poorly-optimized memory.copy
implementations. Since memory.copy cannot be expected to be inlined
efficiently by engines at this time, stop using it for the smallest
copies. We continue to lower all memcpy intrinsics to memory.copy,
though.
Reviewers: aheejin, alexcrichton
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, JDevlieghere, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67639
llvm-svn: 372275
Since we now lower most tail calls, it makes sense to support musttail.
Instead of always falling back to SelectionDAG, only fall back when a musttail
call was not able to be emitted as a tail call. Once we can handle most
incoming and outgoing arguments, we can change this to a `report_fatal_error`
like in ISelLowering.
Remove the assert that we don't have varargs and a musttail, and replace it
with a return false. Implementing this requires that we implement
`saveVarArgRegisters` from AArch64ISelLowering, which is an entirely different
patch.
Add GlobalISel lines to vararg-tallcall.ll to make sure that we produce correct
code. Right now we only fall back, but eventually this will be relevant.
Differential Revision: https://reviews.llvm.org/D67681
llvm-svn: 372273
Summary:
Add function to AutoUpgrade to change the datalayout of old X86 datalayout strings.
This adds "-p270:32:32-p271:32:32-p272:64:64" to X86 datalayouts that are otherwise valid
and don't already contain it.
This also removes the compatibility changes in https://reviews.llvm.org/D66843.
Datalayout change in https://reviews.llvm.org/D64931.
Reviewers: rnk, echristo
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67631
llvm-svn: 372267
Summary:
AArch64 GlobalISel doesn't support MachO's large code model, so this patch
adds a check for that combination before implicitly enabling it.
Reviewers: paquette
Subscribers: kristof.beyls, ributzka, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67724
llvm-svn: 372256
Summary:
As discussed in https://reviews.llvm.org/D62341#1515637,
for MIPS `add %x, -1` isn't optimal. Unlike X86 there
are no fastpaths to matearialize such `-1`/`1` vector constants,
and `sub %x, 1` results in better codegen,
so undo canonicalization
Reviewers: atanasyan, Petar.Avramovic, RKSimon
Reviewed By: atanasyan
Subscribers: sdardis, arichardson, hiraditya, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66805
llvm-svn: 372254
In case of using 32-bit GOT access to the table requires two instructions
with attached %got_hi and %got_lo relocations. This patch implements
correct expansion of 'lw/sw' instructions in that case.
Differential Revision: https://reviews.llvm.org/D67705
llvm-svn: 372251
We need "xgot" flag in the MipsAsmParser to implement correct expansion
of some pseudo instructions in case of using 32-bit GOT (XGOT).
MipsAsmParser does not have reference to MipsSubtarget but has a
reference to "feature bit set".
llvm-svn: 372220
This patch fixes a bug exposed by D65653 where a subsequent invocation
of `determineCalleeSaves` ends up with a different size for the callee
save area, leading to different frame-offsets in debug information.
In the invocation by PEI, `determineCalleeSaves` tries to determine
whether it needs to spill an extra callee-saved register to get an
emergency spill slot. To do this, it calls 'estimateStackSize' and
manually adds the size of the callee-saves to this. PEI then allocates
the spill objects for the callee saves and the remaining frame layout
is calculated accordingly.
A second invocation in LiveDebugValues causes estimateStackSize to return
the size of the stack frame including the callee-saves. Given that the
size of the callee-saves is added to this, these callee-saves are counted
twice, which leads `determineCalleeSaves` to believe the stack has
become big enough to require spilling an extra callee-save as emergency
spillslot. It then updates CalleeSavedStackSize with a larger value.
Since CalleeSavedStackSize is used in the calculation of the frame
offset in getFrameIndexReference, this leads to incorrect offsets for
variables/locals when this information is recalculated after PEI.
Reviewers: omjavaid, eli.friedman, thegameg, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D66935
llvm-svn: 372204
This generates worse code, but matches what is done for avx2 and
prevents crashes when more arguments are passed than we have
registers for.
llvm-svn: 372200
Currently, not all user specified relocations
(with clang intrinsic __builtin_preserve_access_index())
will turn into relocations.
In the current implementation, a __builtin_preserve_access_index()
chain is turned into relocation only if the result of the clang
intrinsic is used in a function call or a nonzero offset computation
of getelementptr. For all other cases, the relocatiion request
is ignored and the __builtin_preserve_access_index() is turned
into regular getelementptr instructions.
The main reason is to mimic bpf_probe_read() requirement.
But there are other use cases where relocatable offset is
generated but not used for bpf_probe_read(). This patch
relaxed previous constraints when to generate relocations.
Now, all user __builtin_preserve_access_index() will have
relocations generated.
Differential Revision: https://reviews.llvm.org/D67688
llvm-svn: 372198
Thomas Lively