Summary:
Only instantiate anonymous records once all variable references in template
arguments have been resolved. This allows patterns like the new test case,
which in practice can appear in expressions like:
class IntrinsicTypeProfile<list<LLVMType> ty, int shift> {
list<LLVMType> types =
!listconcat(ty, [llvm_any_ty, LLVMMatchType<shift>]);
}
class FooIntrinsic<IntrinsicTypeProfile P, ...>
: Intrinsic<..., P.types, ...>;
Without this change, the anonymous LLVMMatchType instantiation would
never get resolved.
Another consequence of this change is that anonymous inline
instantiations are uniqued via the folding set of the newly introduced
VarDefInit.
Change-Id: I7a7041a20e297cf98c9109b28d85e64e176c932a
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43756
llvm-svn: 326788
Summary:
There are various places where resolving and constant folds can
get stuck, especially around casts. We don't always signal an
error for those, because in many cases they can legitimately
occur without being an error in the "untaken branch" of an !if.
Change-Id: I3befc0e4234c8e6cc61190504702918c9f29ce5c
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43754
llvm-svn: 326786
Summary:
Distinguish two relationships between types: is-a and convertible-to.
For example, a bit is not an int or vice versa, but they can be
converted into each other (with range checks that you can think of
as "dynamic": unlike other type checks, those range checks do not
happen during parsing, but only once the final values have been
established).
Actually converting initializers between types is subtle: even
when values of type A can be converted to type B (e.g. int into
string), it may not be possible to do so with a concrete initializer
(e.g., a VarInit that refers to a variable of type int cannot
be immediately converted to a string).
For this reason, distinguish between getCastTo and convertInitializerTo:
the latter implements the actual conversion when appropriate, while
the former will first try to do the actual conversion and fall back
to introducing a !cast operation so that the conversion will be
delayed until variable references have been resolved.
To make the approach of adding !cast operations to work, !cast needs
to fallback to convertInitializerTo when the special string <-> record
logic does not apply.
This enables casting records to a subclass, although that new
functionality is only truly useful together with !isa, which will be
added in a later change.
The test is removed because it uses !srl on a bit sequence,
which cannot really be supported consistently, but luckily
isn't used anywhere either.
Change-Id: I98168bf52649176654ed2ec61a29bdb29970cfe7
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43753
llvm-svn: 326785
Summary:
No functional change intended. The removed code has a loop for
recursive resolving, which is superseded by the recursive
resolving done by the Resolver implementations.
Add a test case which was broken by an earlier version of this
change.
Change-Id: Ib208d037b77a8bbb725977f1388601fc984723d8
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43655
llvm-svn: 326784
Summary:
Allow RecordRecTy to represent the type "subclass of N superclasses",
where N may be zero. Furthermore, generate RecordRecTy instances only
with actual classes in the list.
Keeping track of multiple superclasses is required to resolve the type
of a list correctly in some cases. The old code relied on the incorrect
behavior of typeIsConvertibleTo, and an earlier version of this change
relied on a modified ordering of superclasses (it was committed in
r325884 and then reverted because unfortunately some of clang-tblgen's
backends depend on the ordering).
Previously, the DefInit for each Record would have a RecordRecTy of
that Record as its type. Now, all defs with the same superclasses will
share the same type.
This allows us to be more consistent about type checks involving records:
- typeIsConvertibleTo actually requires the LHS to be a subtype of the
RHS
- resolveTypes will return the least supertype of given record types in
all cases
- different record types in the two branches of an !if are handled
correctly
Add a test that used to be accepted without flagging the obvious type
error.
Change-Id: Ib366db1a4e6a079f1a0851e469b402cddae76714
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43680
llvm-svn: 326783
Summary:
Use the new resolver interface more explicitly, and avoid traversing
all the initializers multiple times.
Add a test case for a pattern that was broken by an earlier version
of this change.
An additional change is that we now remove *all* template arguments
after resolving them.
Change-Id: I86c828c8cc84c18b052dfe0f64c0d5cbf3c4e13c
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43652
llvm-svn: 326706
Summary:
This changes the syntax of !foreach so that the first "parameter" is
a new syntactic variable: !foreach(x, lst, expr) will define the
variable x within the scope of expr, and evaluation of the !foreach
will substitute elements of the given list (or dag) for x in expr.
Aside from leading to a nicer syntax, this allows more complex
expressions where x is deeply nested, or even constant expressions
in which x does not occur at all.
!foreach is currently not actually used anywhere in trunk, but I
plan to use it in the AMDGPU backend. If out-of-tree targets are
using it, they can adjust to the new syntax very easily.
Change-Id: Ib966694d8ab6542279d6bc358b6f4d767945a805
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits, tpr
Differential Revision: https://reviews.llvm.org/D43651
llvm-svn: 326705
Summary:
NAME has already worked for def in a multiclass, since the (protoype)
record including its NAME variable is created before parsing the
superclasses. Since defm's do not have an associated single record,
support for NAME has to be implemented differently here.
Original test cases provided by Artem Belevich (tra)
Change-Id: I933b74f328c0ff202e7dc23a35b78f3505760cc9
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43656
llvm-svn: 326700
This reverts r325884.
Clang's TableGen has dependencies on the exact ordering of superclasses.
Revert this change fully for now to fix the build.
Change-Id: Ib297f5571cc7809f00838702ad7ab53d47335b26
llvm-svn: 325891
Summary:
Only check whether the left-hand side type is a subclass (or equal to)
the right-hand side type.
This requires a further fix in handling !if expressions and in type
resolution.
Furthermore, reverse the order of superclasses so that resolveTypes will
find a least common ancestor at least in simple cases.
Add a test that used to be accepted without flagging the obvious type
error.
Change-Id: Ib366db1a4e6a079f1a0851e469b402cddae76714
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43559
llvm-svn: 325884
Summary:
Returns the size of a list. I have found this to be rather useful in some
development for the AMDGPU backend where we could simplify our .td files
by concatenating list<LLVMType> for complex intrinsics. Doing so requires
us to compute the position argument for LLVMMatchType.
Basically, the usage is in a pattern that looks somewhat like this:
list<LLVMType> argtypes =
!listconcat(base,
[llvm_any_ty, LLVMMatchType<!size(base)>]);
Change-Id: I360a0b000fd488d18bea412228230fd93722bd2c
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits, tpr
Differential Revision: https://reviews.llvm.org/D43553
llvm-svn: 325883
Summary:
Perhaps the distinction between the two should be removed entirely
in the long term, and the [{ ... }] syntax should just be a convenient
way of writing multi-line strings.
In the meantime, a lot of existing .td files are quite relaxed about
string vs. code, and this change allows switching on more consistent
type checks without breaking those.
Change-Id: If85e3e04469e41b58e2703b62ac0032d2711713c
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43557
llvm-svn: 325799
Summary:
In the case of !foreach(id, input-list, transform) where the type of
input-list is list<A> and the type of transform is B, we now correctly
deduce list<B> as the type of the !foreach.
Change-Id: Ia19dd65eecc5991dd648280ba6a15f6a20fd61de
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43555
llvm-svn: 325797
Summary:
This way, it should work even with complex operands.
Change-Id: Iaccf5bbb50bd5882a0ba5d59689e4381315fb361
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43554
llvm-svn: 325796
This patch changes GlobalISelEmitter to rank patterns similar to how the
DAG does it (ie it computes a score for a pattern and adds the added
complexity to it).
This is so that the decision tree for GISelSelector remains compatible
with that of SelectionDAG.
https://reviews.llvm.org/D43270
llvm-svn: 325401
* !foreach on lists didn't evaluate operands of the RHS operator.
This made nested operators silently fail.
* A typo in the code could result in a wrong value substituted
for an operation which produced a false '!foreach requires an operator' error.
* Keep recursion over the DAG within ForeachHelper. This simplifies
things a bit as we no longer need to pass the Type around in order
to prevent recursion.
Differential Revision: https://reviews.llvm.org/D43083
llvm-svn: 324758
Without the patch !if() is only evaluated if it's used directly.
If it's passed through more than one level of class inheritance,
we end up with a reference to an anonymous record with unresolved
references to the original arguments !if may have used.
The root cause of the problem is that TernOpInit::isComplete()
was always returning false and that prevented use of the folded
value of !if() as an initializer for the record at the next level
of inheritance.
Differential Revision: https://reviews.llvm.org/D42695
llvm-svn: 323807
Summary:
Apparently, we missed on constraining register classes of VReg-operands of all the instructions
built from a destination pattern but the root (top-level) one. The issue exposed itself
while selecting G_FPTOSI for armv7: the corresponding pattern generates VTOSIZS wrapped
into COPY_TO_REGCLASS, so top-level COPY_TO_REGCLASS gets properly constrained,
while nested VTOSIZS (or rather its destination virtual register to be exact) does not.
Fixing this by issuing GIR_ConstrainSelectedInstOperands for every nested GIR_BuildMI.
https://bugs.llvm.org/show_bug.cgi?id=35965
rdar://problem/36886530
Patch by Roman Tereshin
Reviewers: dsanders, qcolombet, rovka, bogner, aditya_nandakumar, volkan
Reviewed By: dsanders, qcolombet, rovka
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42565
llvm-svn: 323692
Summary:
This patch adds CustomRenderer which renders the matched
operands to the specified instruction.
Targets can enable the matching of SDNodeXForm by adding
a definition that inherits from GICustomOperandRenderer and
GISDNodeXFormEquiv as follows.
def gi_imm8 : GICustomOperandRenderer<"renderImm8”>,
GISDNodeXFormEquiv<imm8_xform>;
Custom renderer functions should be of the form:
void render(MachineInstrBuilder &MIB, const MachineInstr &I);
Reviewers: dsanders, ab, rovka
Reviewed By: dsanders
Subscribers: kristof.beyls, javed.absar, llvm-commits, mgrang, qcolombet
Differential Revision: https://reviews.llvm.org/D42012
llvm-svn: 322582
This patch improves diagnostic for case when mapped instruction
does not contain a field listed under RowFields.
Differential Revision: https://reviews.llvm.org/D41778
llvm-svn: 322004
Allows preserving MachineMemOperands on intrinsics
through selection. For reasons I don't understand, this
is a static property of the pattern and the selector
deliberately goes out of its way to drop if not present.
Intrinsics already inherit from SDPatternOperator allowing
them to be used directly in instruction patterns. SDPatternOperator
has a list of SDNodeProperty, but you currently can't set them on
the intrinsic. Without SDNPMemOperand, when the node is selected
any memory operands are always dropped. Allowing setting this
on the intrinsics avoids needing to introduce another equivalent
target node just to have SDNPMemOperand set.
llvm-svn: 321212
NFC for currently supported targets. This resolves a problem encountered by
targets such as RISCV that reference `Subtarget` in ImmLeaf predicates.
llvm-svn: 321176
*** Context ***
Prior to this patchw, the table generated for matching instruction was
straight forward but highly inefficient.
Basically, each pattern generates its own set of self contained checks
and actions.
E.g., TableGen generated:
// First pattern
CheckNumOperand 3
CheckOpcode G_ADD
...
Build ADDrr
// Second pattern
CheckNumOperand 3
CheckOpcode G_ADD
...
Build ADDri
// Third pattern
CheckNumOperand 3
CheckOpcode G_SUB
...
Build SUBrr
*** Problem ***
Because of that generation, a *lot* of check were redundant between each
pattern and were checked every single time until we reach the pattern
that matches.
E.g., Taking the previous table, let say we are matching a G_SUB, that
means we were going to check all the rules for G_ADD before looking at
the G_SUB rule. In particular we are going to do:
check 3 operands; PASS
check G_ADD; FAIL
; Next rule
check 3 operands; PASS (but we already knew that!)
check G_ADD; FAIL (well it is still not true)
; Next rule
check 3 operands; PASS (really!!)
check G_SUB; PASS (at last :P)
*** Proposed Solution ***
This patch introduces a concept of group of rules (GroupMatcher) that
share some predicates and only get checked once for the whole group.
This patch only creates groups with one nesting level. Conceptually
there is nothing preventing us for having deeper nest level. However,
the current implementation is not smart enough to share the recording
(aka capturing) of values. That limits its ability to do more sharing.
For the given example the current patch will generate:
// First group
CheckOpcode G_ADD
// First pattern
CheckNumOperand 3
...
Build ADDrr
// Second pattern
CheckNumOperand 3
...
Build ADDri
// Second group
CheckOpcode G_SUB
// Third pattern
CheckNumOperand 3
...
Build SUBrr
But if we allowed several nesting level, it could create a sub group
for the checknumoperand 3.
(We would need to call optimizeRules on the rules within a group.)
*** Result ***
With only one level of nesting, the instruction selection pass is up
to 4x faster. For instance, one instruction now takes 500 checks,
instead of 24k! With more nesting we could get in the tens I believe.
Differential Revision: https://reviews.llvm.org/D39034
rdar://problem/34670699
llvm-svn: 321017
A number of architectures re-use the same register names (e.g. for both 32-bit
FPRs and 64-bit FPRs). They are currently unable to use the tablegen'erated
MatchRegisterName and MatchRegisterAltName, as tablegen (when built with
asserts enabled) will fail.
When the AllowDuplicateRegisterNames in AsmParser is set, duplicated register
names will be tolerated. A backend can then coerce registers to the desired
register class by (for instance) implementing validateTargetOperandClass.
At least the in-tree Sparc backend could benefit from this, as does RISC-V
(single and double precision floating point registers).
Differential Revision: https://reviews.llvm.org/D39845
llvm-svn: 320018
This patch splits atomics out of the generic G_LOAD/G_STORE and into their own
G_ATOMIC_LOAD/G_ATOMIC_STORE. This is a pragmatic decision rather than a
necessary one. Atomic load/store has little in implementation in common with
non-atomic load/store. They tend to be handled very differently throughout the
backend. It also has the nice side-effect of slightly improving the common-case
performance at ISel since there's no longer a need for an atomicity check in the
matcher table.
All targets have been updated to remove the atomic load/store check from the
G_LOAD/G_STORE path. AArch64 has also been updated to mark
G_ATOMIC_LOAD/G_ATOMIC_STORE legal.
There is one issue with this patch though which also affects the extending loads
and truncating stores. The rules only match when an appropriate G_ANYEXT is
present in the MIR. For example,
(G_ATOMIC_STORE (G_TRUNC:s16 (G_ANYEXT:s32 (G_ATOMIC_LOAD:s16 X))))
will match but:
(G_ATOMIC_STORE (G_ATOMIC_LOAD:s16 X))
will not. This shouldn't be a problem at the moment, but as we get better at
eliminating extends/truncates we'll likely start failing to match in some
cases. The current plan is to fix this in a patch that changes the
representation of extending-load/truncating-store to allow the MMO to describe
a different type to the operation.
llvm-svn: 319691
GIM_CheckNonAtomic has been replaced by GIM_CheckAtomicOrdering to allow it to support a wider
range of orderings. This has then been used to import patterns using nodes such
as atomic_cmp_swap, atomic_swap, and atomic_load_*.
llvm-svn: 319232
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
llvm-svn: 318356
Allow a pattern rewriter to be installed in CodeGenDAGPatterns and use it to
correct situations where SelectionDAG and GlobalISel disagree on
representation. For example, it would rewrite:
(sextload:i32 $ptr)<<unindexedload>><<sextload>><<sextloadi16>
to:
(sext:i32 (load:i16 $ptr)<<unindexedload>>)
I'd have preferred to replace the fragments and have the expansion happen
naturally as part of PatFrag expansion but the type inferencing system can't
cope with loads of types narrower than those mentioned in register classes.
This is because the SDTCisInt's on the sext constrain both the result and
operand to the 'legal' integer types (where legal is defined as 'a register
class can contain the type') which immediately rules the narrower types out.
Several targets (those with only one legal integer type) would then go on to
crash on the SDTCisOpSmallerThanOp<> when it removes all the possible types
for the result of the extend.
Also, improve isObviouslySafeToFold() slightly to automatically return true for
neighbouring instructions. There can't be any re-ordering problems if
re-ordering isn't happenning. We'll need to improve it further to handle
sign/zero-extending loads when the extend and load aren't immediate neighbours
though.
llvm-svn: 317971
The importer will now accept nested instructions in the result pattern such as
(ADDWrr $a, (SUBWrr $b, $c)). This is only valid when the nested instruction
def's a single vreg and the parent instruction consumes a single vreg where a
nested instruction is specified. The importer will automatically create a vreg
to connect the two using the type information from the pattern. This vreg will
be constrained to the register classes given in the instruction definitions*.
* REG_SEQUENCE is explicitly rejected because of this. The definition doesn't
constrain to a register class and it therefore needs special handling.
llvm-svn: 317117
Summary:
iPTR is a pointer of subtarget-specific size to any address space. Therefore
type checks on this size derive the SizeInBits from a subtarget hook.
At this point, we can import the simplests G_LOAD rules and select load
instructions using them. Further patches will support for the predicates to
enable additional loads as well as the stores.
The previous commit failed on MSVC due to a failure to convert an
initializer_list to a std::vector. Hopefully, MSVC will accept this version.
Depends on D37457
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37458
llvm-svn: 315887
Summary:
This includes some context-sensitivity in the MVT to LLT conversion so that
pointer types are tested correctly.
FIXME: I'm not happy with the way this is done since everything is a
special-case. I've yet to find a reasonable way to implement it.
select-load.mir fails because <1 x s64> loads in tablegen get priority over s64
loads. This is fixed in the next patch and as such they should be committed
together, I've posted them separately to help with the review.
Depends on D37456
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37457
llvm-svn: 315884
Summary:
It's possible for a ComplexPattern to be used as an operator in a match
pattern. This is used by the load/store patterns in AArch64 to name the
suboperands returned by ComplexPattern predicate so that they can be broken
apart and referenced independently in the result pattern.
This patch adds support for this in order to enable the import of load/store
patterns.
Depends on D37445
Hopefully fixed the ambiguous constructor that a large number of bots reported.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D37456
llvm-svn: 315869
Summary:
It's possible for a ComplexPattern to be used as an operator in a match
pattern. This is used by the load/store patterns in AArch64 to name the
suboperands returned by ComplexPattern predicate so that they can be broken
apart and referenced independently in the result pattern.
This patch adds support for this in order to enable the import of load/store
patterns.
Depends on D37445
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D37456
llvm-svn: 315863
Summary:
Operand variable lookups are now performed by the RuleMatcher rather than
searching the whole matcher hierarchy for a match. This revealed a wrong-code
bug that currently affects ARM and X86 where patterns that use a variable more
than once in the match pattern will be imported but won't check that the
operands are identical. This can cause the tablegen-erated matcher to
accept matches that should be rejected.
Depends on D36569
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: aemerson, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36618
llvm-svn: 315780
Summary:
There's only a tablegen testcase for IntImmLeaf and not a CodeGen one
because the relevant rules are rejected for other reasons at the moment.
On AArch64, it's because there's an SDNodeXForm attached to the operand.
On X86, it's because the rule either emits multiple instructions or has
another predicate using PatFrag which cannot easily be supported at the
same time.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36569
llvm-svn: 315761
It's rare but there are a small number of patterns like this:
(set i64:$dst, (add i64:$src1, i64:$src2))
These should be equivalent to register classes except they shouldn't check for
a specific register bank.
This doesn't occur in AArch64/ARM/X86 but does occasionally come up in other
in-tree targets such as BPF.
llvm-svn: 315226
This replaces TableGen's type inference to operate on parameterized
types instead of MVTs, and as a consequence, some interfaces have
changed:
- Uses of MVTs are replaced by ValueTypeByHwMode.
- EEVT::TypeSet is replaced by TypeSetByHwMode.
This affects the way that types and type sets are printed, and the
tests relying on that have been updated.
There are certain users of the inferred types outside of TableGen
itself, namely FastISel and GlobalISel. For those users, the way
that the types are accessed have changed. For typical scenarios,
these replacements can be used:
- TreePatternNode::getType(ResNo) -> getSimpleType(ResNo)
- TreePatternNode::hasTypeSet(ResNo) -> hasConcreteType(ResNo)
- TypeSet::isConcrete -> TypeSetByHwMode::isValueTypeByHwMode(false)
For more information, please refer to the review page.
Differential Revision: https://reviews.llvm.org/D31951
llvm-svn: 313271
This fixes 2 problems in subregister hierarchies with multiple levels
and tuples:
1) For bigger tuples computing secondary subregs would miss 2nd order
effects. In the test case a register like `S10_S11_S12_S13_S14` with D5
= S10_S11, D6 = S12_S13 we would correctly compute sub0 = D5, sub1 = D6
but would miss the fact that we could now form ssub0_ssub1_ssub2_ssub3
(aka sub0_sub1) = D5_D6. This is fixed by changing
computeSecondarySubRegs() to compute a fixpoint.
2) Fixing 1) exposed a problem where TableGen would create multiple
names for effectively the same subregister index. In the test case
the subregister index sub0 is composed from ssub0 and ssub1, and sub1 is
composed from ssub2 and ssub3. TableGen should not create both sub0_sub1
and ssub0_ssub1_ssub2_ssub3 as infered subregister indexes. This changes
the code to build a transitive closure of the subregister components
before forming new concatenated subregister indexes.
This fix was developed for an out of tree target. For the in-tree
targets the only change is in the register information computed for ARM.
There is a slight chance this fixed/improved some register coalescing
around the QQQQ/QQ register classes there but I couldn't see/provoke any
code generation differences.
Differential Revision: https://reviews.llvm.org/D36913
llvm-svn: 311914
This fixes a warning when there are zero defined predicates and also fixes an
unnoticed bug where the first predicate in the table was unusable.
llvm-svn: 311684
Summary:
This patch adds support for predicates on imm nodes but only for ImmLeaf and not
for PatLeaf or PatFrag and only where the value does not need to be transformed
before being rendered into the instruction.
The limitation on PatLeaf/PatFrag/SDNodeXForm is due to differences in the
necessary target-supplied C++ for GlobalISel.
Depends on D36085
The previous commit was reverted for breaking the build but this appears to have
been the recurring problem on the Windows bots with tablegen not being re-run
when llvm-tblgen is changed but the .td's aren't. If it re-occurs then forcing a
build with clean=True should fix it but this string should do this in advance:
Requires a clean build.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36086
llvm-svn: 311645
Summary:
This patch adds support for predicates on imm nodes but only for ImmLeaf and not for PatLeaf or PatFrag and only where the value does not need to be transformed before being rendered into the instruction.
The limitation on PatLeaf/PatFrag/SDNodeXForm is due to differences in the necessary target-supplied C++ for GlobalISel.
Depends on D36085
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36086
llvm-svn: 311546
Summary:
Generate the type table from the types used by a target rather than hard-coding
the union of types used by all targets.
Depends on D36084
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36085
llvm-svn: 311084
As expected, this failed on the windows bots but the instrumentation showed
something interesting. The ADD8ri and INC8r rules are never directly compared
on the windows machines. That implies that the issue lies in transitivity of
the Compare predicate. I believe I've already verified that but maybe I missed
something.
llvm-svn: 310922
Summary:
Support the case where an operand of a pattern is also the whole of the
result pattern. In this case the original result and all its uses must be
replaced by the operand. However, register class restrictions can require
a COPY. This patch handles both cases by always emitting the copy and
leaving it for the register allocator to optimize.
The previous commit failed on the windows bots and this one is likely to fail
on those same bots. However, the added instrumentation should reveal a particular
isHigherPriorityThan() evaluation which I'm expecting to expose that
these machines are weighing priority of two rules differently from the
non-windows machines.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: javed.absar, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36084
llvm-svn: 310919
Two of the Windows bots are failing test\CodeGen\X86\GlobalISel\select-inc.mir
which should not have been affected by the change. Reverting while I investigate.
Also reverted r310735 because it builds on r310716.
llvm-svn: 310745
Summary:
Generate the type table from the types used by a target rather than hard-coding
the union of types used by all targets.
Depends on D36084
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36085
llvm-svn: 310735
Summary:
This patch enables the import of rules containing 'imm' operands that do not
constrain the acceptable values using predicates. Support for ImmLeaf will
arrive in a later patch.
Depends on D35681
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35833
llvm-svn: 310343
Summary:
We only need to merge memory operands for instructions that access
memory. This slightly reduces the number of actions executed.
Reviewers: MatzeB, rovka, dsanders
Reviewed By: dsanders
Subscribers: aemerson, igorb, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D36151
llvm-svn: 309944
Summary:
Fix a bug discovered in an out-of-tree target where memoperands from
pseudo-instructions that weren't part of the match were being merged into the
result instructions as part of GIR_MergeMemOperands.
This bug was caused by a change to the handling of State.MIs between rules when
the state machine tables were fused into a single table. Previously, each rule
would reset State.MIs using State.MIs.resize(1) but this is no longer done, as a
result stale data is occasionally left in some elements of State.MIs. Most
opcodes aren't affected by this but GIR_MergeMemOperands merges all memoperands
from the intructions recorded in State.MIs into the result instruction.
Suppose for example, we processed but rejected the following pattern:
(signextend (load x))
at this point, State.MIs contains the signextend and the load. Now suppose we
process and accept this pattern:
(add x, y)
at this point, State.MIs contains the add as well as the (now irrelevant) load.
When GIR_MergeMemOperands is processed, the memoperands from that irrelevant
load will be merged into the result instruction even though it was not part of
the match.
Bringing back the State.MIs.resize(1) would fix the problem but it would limit
our ability to optimize the table in the future. Instead, this patch fixes the
problem by explicitly stating which instructions should be merged into the result.
There's no direct test case in this commit because a test case would be very brittle.
However, at the time of writing this should fix the failures in
http://green.lab.llvm.org/green/job/Compiler_Verifiers_GlobalISEL/ as well as a
failure in test/CodeGen/ARM/GlobalISel/arm-isel.ll when expensive checks are enabled.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: fhahn, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36094
llvm-svn: 309804
Summary:
Now that we have control flow in place, fuse the per-rule tables into a
single table. This is a compile-time saving at this point. However, this will
also enable the optimization of a table so that similar instructions can be
tested together, reducing the time spent on the matching the code.
This is NFC in terms of externally visible behaviour but some internals have
changed slightly. State.MIs is no longer reset between each rule that is
attempted because it's not necessary to do so. As a consequence of this the
restriction on the order that instructions are added to State.MIs has been
relaxed to only affect recorded instructions that require new elements to be
added to the vector. GIM_RecordInsn can now write to any element from 1 to
State.MIs.size() instead of just State.MIs.size().
The compile-time regressions from the last commit were caused by the ARM target
including a non-const variable (zero_reg) in the table and therefore generating
an initializer for it. That variable is now const.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35681
llvm-svn: 309264
The ARM bots have started failing and while this patch should be an improvement
for these bots, it's also the only suspect in the blamelist. Reverting while
Diana and I investigate the problem.
llvm-svn: 309111
Summary:
Now that we have control flow in place, fuse the per-rule tables into a
single table. This is a compile-time saving at this point. However, this will
also enable the optimization of a table so that similar instructions can be
tested together, reducing the time spent on the matching the code.
This is NFC in terms of externally visible behaviour but some internals have
changed slightly. State.MIs is no longer reset between each rule that is
attempted because it's not necessary to do so. As a consequence of this the
restriction on the order that instructions are added to State.MIs has been
relaxed to only affect recorded instructions that require new elements to be
added to the vector. GIM_RecordInsn can now write to any element from 1 to
State.MIs.size() instead of just State.MIs.size().
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35681
llvm-svn: 309094
Summary:
This will allow us to merge the various sub-tables into a single table. This is a
compile-time saving at this point. However, this will also enable the optimization
of a table so that similar instructions can be tested together, reducing the time
spent on the matching the code.
The bulk of this patch is a mechanical conversion to the new MatchTable object
which is responsible for tracking label definitions and filling in the index of
the jump targets. It is also responsible for nicely formatting the table.
This was necessary to support the new GIM_Try opcode which takes the index to
jump to if the match should fail. This value is unknown during table
construction and is filled in during emission. To support nesting try-blocks
(although we currently don't emit tables with nested try-blocks), GIM_Reject
has been re-introduced to explicitly exit a try-block or fail the overall match
if there are no active try-blocks.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35117
llvm-svn: 308596
Summary:
NetBSD shell sh(1) does not support ">& /dev/null" construct.
This is bashism. The portable and POSIX solution is to use:
"> /dev/null 2>&1".
This change fixes 22 Unexpected Failures on NetBSD/amd64
for the "check-llvm" target.
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, dim, rnk
Reviewed By: joerg, rnk
Subscribers: rnk, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D35277
llvm-svn: 307789
In each rule, each use of ComplexPattern is assigned an element in the Renderers
array. The matcher then collects renderer functions in this array and they are
used to render instructions. This works well for a single instruction but a
bug in the allocation mechanism causes the elements to be assigned on a
per-instruction basis rather than a per-rule basis.
So in the case of:
(set GPR32:$dst, (Op complex:$src1, complex:$src2))
tablegen currently assigns elements 0 and 1 to $src1 and $src2 respectively,
but for:
(set GPR32:$dst, (Op complex:$src1, (Op complex:$src2)))
it currently assigned both $src1 and $src2 the same element (0). This results in
one complex operand being rendered twice and the other being forgotten.
This patch corrects the allocation such that $src1 and $src2 are still allocated
different elements in this case.
llvm-svn: 307646
TreePatternNode considers them to be plain integers but MachineInstr considers
them to be a distinct kind of operand.
The tweak to AArch64InstrInfo.td to produce a simple test case is a NFC for
everything except GlobalISelEmitter (confirmed by diffing the tablegenerated
files). GlobalISelEmitter is currently unable to infer the type of operands in
the Dst pattern from the operands in the Src pattern.
llvm-svn: 307634
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
llvm-svn: 307240
Summary:
Also, made a few minor tweaks to shave off a little more cumulative memory consumption:
* All rules share a single NewMIs instead of constructing their own. Only one
will end up using it.
* Use MIs.resize(1) instead of MIs.clear();MIs.push_back(I) and prevent
GIM_RecordInsn from changing MIs[0].
Depends on D33764
Reviewers: rovka, vitalybuka, ab, t.p.northover, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D33766
llvm-svn: 307159
Summary:
This further improves the compile-time regressions that will be caused by a
re-commit of r303259.
Also added included preliminary work in preparation for the multi-insn emitter
since I needed to change the relevant part of the API for this patch anyway.
Depends on D33758
Reviewers: rovka, vitalybuka, ab, t.p.northover, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D33764
llvm-svn: 307133
Summary:
Replace the matcher if-statements for each rule with a state-machine. This
significantly reduces compile time, memory allocations, and cumulative memory
allocation when compiling AArch64InstructionSelector.cpp.o after r303259 is
recommitted.
The following patches will expand on this further to fully fix the regressions.
Reviewers: rovka, ab, t.p.northover, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: vitalybuka, aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D33758
llvm-svn: 307079
Summary:
As part of this
* Emitted instructions now have named MachineInstr variables associated
with them. This isn't particularly important yet but it's a small step
towards multiple-insn emission.
* constrainSelectedInstRegOperands() is no longer hardcoded. It's now added
as the ConstrainOperandsToDefinitionAction() action. COPY_TO_REGCLASS uses
an alternate constraint mechanism ConstrainOperandToRegClassAction() which
supports arbitrary constraints such as that defined by COPY_TO_REGCLASS.
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: ab
Subscribers: javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D33590
llvm-svn: 305791
Summary:
It's rare but a small number of patterns use IntInit's at the root of the match.
On X86, one such rule is enabled by the OptForSize predicate and causes the
compiler to use the smaller:
%0 = MOV32r1
instead of the usual:
%0 = MOV32ri 1
This patch adds support for matching IntInit's at the root and uses this as a
test case for the optsize attribute that was implemented in r301750
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32791
llvm-svn: 303678
It's causing some buildbots to timeout whenever tablegen needs re-compilation,
particularly those with -fsanitize=memory but not only them. A compile time
regression was expected since it triples the amount of SelectionDAG rules we
are able to import but it's currently too high.
llvm-svn: 303542
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
The previous commit failed on test-suite/Bitcode/simd_ops/AArch64_halide_runtime.bc
because isImmOperandEqual() assumed MO was a register operand and that's not
always true.
llvm-svn: 303341
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
llvm-svn: 303259
Summary:
Without this, it's possible to encounter multiple defs for a register.
This is triggered by the current version of D32868 when applied to trunk.
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls
Reviewed By: qcolombet
Subscribers: llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32869
llvm-svn: 303253
When looping through a destination pattern's operands to decide how many
default operands we need to introduce, we used to count the "expanded"
number of operands. So if one default operand would be rendered as 2
values, we'd count it as 2 operands, when in fact it needs to count as
only 1 operand regardless of how many values it expands to.
This turns out to be a problem only in some very specific cases, e.g.
when we have one operand with multiple default values followed by more
operands with default values (see the new test). In such a situation
we'd stop looping before looking at all the operands, and then error out
assuming that we don't have enough default operands to make up the
shortfall.
At the moment this only affects ARM.
The patch removes the loop counting default operands entirely and
assumes that we'll have to introduce values for any default operand that
we find (i.e. we're assuming it cannot be given as a child at all). It
also extracts the code for adding renderers for default operands into a
helper method.
Differential Revision: https://reviews.llvm.org/D33031
llvm-svn: 303240
Summary:
Predicate<> now has a field to indicate how often it must be recomputed.
Currently, there are two frequencies, per-module (RecomputePerFunction==0)
and per-function (RecomputePerFunction==1). Per-function predicates are
currently recomputed more frequently than necessary since the only predicate
in this category is cheap to test. Per-module predicates are now computed in
getSubtargetImpl() while per-function predicates are computed in selectImpl().
Tablegen now manages the PredicateBitset internally. It should only be
necessary to add the required includes.
Also fixed a problem revealed by the test case where
constrainSelectedInstRegOperands() would attempt to tie operands that
BuildMI had already tied.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32491
llvm-svn: 301750
Summary:
It functions just like RegisterClass except that the class is obtained
from a field.
Depends on D31761.
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32229
llvm-svn: 301080
Summary:
Some targets need to be able to do more complex rendering than just adding an
operand or two to an instruction. For example, it may need to insert an
instruction to extract a subreg first, or it may need to perform an operation
on the operand.
In SelectionDAG, targets would create SDNode's to achieve the desired effect
during the complex pattern predicate. This worked because SelectionDAG had a
form of garbage collection that would take care of SDNode's that were created
but not used due to a later predicate rejecting a match. This doesn't translate
well to GlobalISel and the churn was wasteful.
The API changes in this patch enable GlobalISel to accomplish the same thing
without the waste. The API is now:
InstructionSelector::OptionalComplexRendererFn selectArithImmed(MachineOperand &Root) const;
where Root is the root of the match. The return value can be omitted to
indicate that the predicate failed to match, or a function with the signature
ComplexRendererFn can be returned. For example:
return OptionalComplexRendererFn(
[=](MachineInstrBuilder &MIB) { MIB.addImm(Immed).addImm(ShVal); });
adds two immediate operands to the rendered instruction. Immed and ShVal are
captured from the predicate function.
As an added bonus, this also reduces the amount of information we need to
provide to GIComplexOperandMatcher.
Depends on D31418
Reviewers: aditya_nandakumar, t.p.northover, qcolombet, rovka, ab, javed.absar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31761
llvm-svn: 301079
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300993
It's causing llvm-clang-x86_64-expensive-checks-win to fail to compile and I
haven't worked out why. Reverting to make it green while I figure it out.
llvm-svn: 300978
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300964
Adds scalable vector machine value types, and updates
the switch statements required for tablegen.
Patch by Graham Hunter.
Differential Revision: https://reviews.llvm.org/D32018
llvm-svn: 300840
Summary:
As far as instruction selection is concerned, all three appear to be same thing.
Support for these operands is experimental since AArch64 doesn't make use
of them and the in-tree targets that do use them (AMDGPU for
OperandWithDefaultOps, AMDGPU/ARM/Hexagon/Lanai for PredicateOperand, and ARM
for OperandWithDefaultOps) are not using tablegen-erated GlobalISel yet.
Reviewers: rovka, aditya_nandakumar, t.p.northover, qcolombet, ab
Reviewed By: rovka
Subscribers: inglorion, aemerson, rengolin, mehdi_amini, dberris, kristof.beyls, igorb, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D31135
llvm-svn: 300037
Summary:
Temporaries are now allocated to operands instead of predicates and this
allocation is used to correctly pair up the rendered operands with the
matched operands.
Previously, ComplexPatterns were allocated temporaries independently in the
Src Pattern and Dst Pattern, leading to mismatches. Additionally, the Dst
Pattern failed to account for the allocated index and therefore always used
temporary 0, 1, ... when it should have used base+0, base+1, ...
Thanks to Aditya Nandakumar for noticing the bug.
Depends on D30539
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: igorb, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D31054
llvm-svn: 299538
Summary:
Lift the restrictions that prevented the tree walking introduced in the
previous change and add support for patterns like:
(G_ADD (G_MUL (G_SEXT $src1), (G_SEXT $src2)), $src3) -> SMADDWrrr $dst, $src1, $src2, $src3
Also adds support for G_SEXT and G_ZEXT to support these cases.
One particular aspect of this that I should draw attention to is that I've
tried to be overly conservative in determining the safety of matches that
involve non-adjacent instructions and multiple basic blocks. This is intended
to be used as a cheap initial check and we may add a more expensive check in
the future. The current rules are:
* Reject if any instruction may load/store (we'd need to check for intervening
memory operations.
* Reject if any instruction has implicit operands.
* Reject if any instruction has unmodelled side-effects.
See isObviouslySafeToFold().
Reviewers: t.p.northover, javed.absar, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30539
llvm-svn: 299430
Summary:
Prepare the way for nested instruction matching support by having actions
like CopyRenderer look up operands in the RuleMatcher rather than a
specific InstructionMatcher. This allows actions to reference any operand
from any matched instruction.
It works by checking the 'shape' of the match and capturing
each matched instruction to a local variable. If the shape is wrong
(not enough operands, leaf nodes where non-leafs are expected, etc.), then
the rule exits early without checking the predicates. Once we've captured
the instructions, we then test the predicates as before (except using the
local variables). If the match is successful, then we render the new
instruction as before using the local variables.
It's not noticable in this patch but by the time we support multiple
instruction matching, this patch will also cause a significant improvement
to readability of the emitted code since
MRI.getVRegDef(I->getOperand(0).getReg()) will simply be MI1 after
emitCxxCaptureStmts().
This isn't quite NFC because I've also fixed a bug that I'm surprised we
haven't encountered yet. It now checks there are at least the expected
number of operands before accessing them with getOperand().
Depends on D30531
Reviewers: t.p.northover, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: rovka
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30535
llvm-svn: 298257
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
llvm-svn: 297782
Summary:
This isn't testable for AArch64 by itself so this patch also adds
support for constant immediates in the pattern and physical
register uses in the result.
The new IntOperandMatcher matches the constant in patterns such as
'(set $rd:GPR32, (G_XOR $rs:GPR32, -1))'. It's always safe to fold
immediates into an instruction so this is the first rule that will match
across multiple BB's.
The Renderer hierarchy is responsible for adding operands to the result
instruction. Renderers can copy operands (CopyRenderer) or add physical
registers (in particular %wzr and %xzr) to the result instruction
in any order (OperandMatchers now import the operand names from
SelectionDAG to allow renderers to access any operand). This allows us to
emit the result instruction for:
%1 = G_XOR %0, -1 --> %1 = ORNWrr %wzr, %0
%1 = G_XOR -1, %0 --> %1 = ORNWrr %wzr, %0
although the latter is untested since the matcher/importer has not been
taught about commutativity yet.
Added BuildMIAction which can build new instructions and mutate them where
possible. W.r.t the mutation aspect, MatchActions are now told the name of
an instruction they can recycle and BuildMIAction will emit mutation code
when the renderers are appropriate. They are appropriate when all operands
are rendered using CopyRenderer and the indices are the same as the matcher.
This currently assumes that all operands have at least one matcher.
Finally, this change also fixes a crash in
AArch64InstructionSelector::select() caused by an immediate operand
passing isImm() rather than isCImm(). This was uncovered by the other
changes and was detected by existing tests.
Depends on D29711
Reviewers: t.p.northover, ab, qcolombet, rovka, aditya_nandakumar, javed.absar
Reviewed By: rovka
Subscribers: aemerson, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D29712
llvm-svn: 296131
Summary:
Each OperandPredicateMatcher shouldn't need to know how to generate the expression
to reference a MachineOperand. The OperandMatcher should provide it.
In addition to separating responsibilities, this also lays some groundwork for
decoupling source patterns from destination patterns to allow invented operands
or operands provided by GlobalISel's equivalent to the ComplexPattern<> class.
Depends on D29709
Reviewers: t.p.northover, ab, rovka, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D29710
llvm-svn: 295668
This lets us split out PatternToMatch from the top-level RuleMatcher,
where it doesn't really belong. That, in turn, lets us eventually
generate RuleMatchers from non-SelectionDAG sources.
llvm-svn: 294076
Summary:
AMDGPU has two register classes with the same set of registers, and this
was causing this tablegen backend would get stuck in infinite recursion.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: tpr, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D29049
llvm-svn: 293483
Tablegen's -gen-instr-info pass has a bug in its emitEnums() routine.
The function intends for values in a vector to be deduplicated, but it
accidentally skips over elements after performing a deletion.
I think there are smarter ways of doing this deduplication, but we can
do that in a follow-up commit if there's interest. See the thread:
[PATCH] TableGen InstrMapping Bug fix.
Patch by Tyler Kenney!
llvm-svn: 288408
Summary:
This allows specifying instructions that are available only in specific assembler variant. If AsmVariantName is specified then instruction will be presented only in MatchTable for this variant. If not specified then assembler variants will be determined based on AsmString.
Also this allows splitting assembler match tables in same way as it is done in dissasembler.
Reviewers: ab, tstellarAMD, craig.topper, vpykhtin
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D24249
llvm-svn: 280952
These tests don't actually care about the internal opcode number, but have to
be updated whenever we add a new one for GlobalISel. That's bad.
llvm-svn: 274774
Summary:
The `"patchable-function"` attribute can be used by an LLVM client to
influence LLVM's code generation in ways that makes the generated code
easily patchable at runtime (for instance, to redirect control).
Right now only one patchability scheme is supported,
`"prologue-short-redirect"`, but this can be expanded in the future.
Reviewers: joker.eph, rnk, echristo, dberris
Subscribers: joker.eph, echristo, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19046
llvm-svn: 266715
This required changing several places to print VT enums as strings instead of raw ints since the proper method to use to print became ambiguous. This is probably an improvement anyway.
This also appears to save ~8K from an x86 self host build of llc.
llvm-svn: 266562
Currently you can't specify node properties like commutativity on
a PatFrag. If you want to create a PatFrag on a commutative node
with a hasOneUse predicate, this enables you to specify that the
PatFrag is also commutable.
llvm-svn: 260404
The AMDGPU backend was the last user of the old StringMatcher
recognition code. Move it over to the new lookupLLVMIntrinsicName
funciton, which is now improved to handle all of the interesting edge
cases exposed by AMDGPU intrinsic names.
llvm-svn: 258875
The selection process being split into separate passes, we need generic opcodes
to translate the LLVM IR to target independent code.
This patch adds an opcode for addition: G_ADD.
Differential Revision: http://reviews.llvm.org/D15472
llvm-svn: 258333
Summary:
Add the necessary plumbing so that llvm_token_ty can be used as an
argument/return type in intrinsic definitions and correspondingly require
TokenTy in function types. TokenTy is an opaque type that has no target
lowering, but can be used in machine-independent intrinsics. It is
required for the upcoming llvm.eh.padparam intrinsic.
Reviewers: majnemer, rnk
Subscribers: stoklund, llvm-commits
Differential Revision: http://reviews.llvm.org/D12532
llvm-svn: 246651
This is to fix an incorrect error when trying to initialize
DwarfNumbers with a !cast<int> of a bits initializer.
getValuesAsListOfInts("DwarfNumbers") would not see an IntInit
and instead the cast, so would give up.
It seems likely that this could be generalized to attempt
the convertInitializerTo for any type. I'm not really sure
why the existing code seems to special case the string cast cases
when convertInitializerTo seems like it should generally handle this
sort of thing.
llvm-svn: 243722
When FixedLenDecoder matches an input bitpattern of form [01]+ with an
instruction bitpattern of form [01?]+ (where 0/1 are static bits and ? are
mixed/variable bits) it passes the input bitpattern to a specific instruction
decoder method which then makes a final decision whether the bitpattern is a
valid instruction or not. This means the decoder must handle all possible
values of the variable bits which sometimes leads to opcode rewrites in the
decoder method when the instructions are not fully orthogonal.
The patch provides a way for the decoder method to say that when it returns
Fail it does not necessarily mean the bitpattern is invalid, but rather that
the bitpattern is definitely not an instruction that is recognized by the
decoder method. The decoder can then try to match the input bitpattern with
other possible instruction bitpatterns.
For example, this allows to solve a situation on AArch64 where the `MSR
(immediate)` instruction has form:
1101 0101 0000 0??? 0100 ???? ???1 1111
but not all values of the ? bits are allowed. The rejected values should be
handled by the `extended MSR (register)` instruction:
1101 0101 000? ???? ???? ???? ???? ????
The decoder will first try to decode an input bitpattern that matches both
bitpatterns as `MSR (immediate)` but currently this puts the decoder method of
`MSR (immediate)` into a situation when it must be able to decode all possible
values of the ? bits, i.e. it would need to rewrite the instruction to `MSR
(register)` when it is not `MSR (immediate)`.
The patch allows to specify that the decoder method cannot determine if the
instruction is valid for all variable values. The decoder method can simply
return Fail when it knows it is definitely not `MSR (immediate)`. The decoder
will then backtrack the decoding and find that it can match the input
bitpattern with the more generic `MSR (register)` bitpattern too.
Differential Revision: http://reviews.llvm.org/D7174
llvm-svn: 242274
Previously, subtarget features were a bitfield with the underlying type being uint64_t.
Since several targets (X86 and ARM, in particular) have hit or were very close to hitting this bound, switching the features to use a bitset.
No functional change.
The first several times this was committed (e.g. r229831, r233055), it caused several buildbot failures.
Apparently the reason for most failures was both clang and gcc's inability to deal with large numbers (> 10K) of bitset constructor calls in tablegen-generated initializers of instruction info tables.
This should now be fixed.
llvm-svn: 238192
We had not been trying hard enough to resolve def names inside multiclasses
that had complex concatenations, etc. Now we'll try harder.
Patch by Amaury Sechet!
llvm-svn: 237877
Previously, subtarget features were a bitfield with the underlying type being uint64_t.
Since several targets (X86 and ARM, in particular) have hit or were very close to hitting this bound, switching the features to use a bitset.
No functional change.
The first two times this was committed (r229831, r233055), it caused several buildbot failures.
At least some of the ARM and MIPS ones were due to gcc/binutils issues, and should now be fixed.
llvm-svn: 237234
The v1i128 type is needed for the quadword add/substract instructions introduced
in POWER8. Futhermore, the PowerPC ABI specifies that parameters of type v1i128
are to be passed in a single vector register, while parameters of type i128 are
passed in pairs of GPRs. Thus, it is necessary to be able to differentiate
between v1i128 and i128 in LLVM.
http://reviews.llvm.org/D8564
llvm-svn: 235198
Summary:
The loop which emits AssemblerPredicate conditions also links them together by emitting a '&&'.
If the 1st predicate is not an AssemblerPredicate, while the 2nd one is, nothing gets emitted for the 1st one, but we still emit the '&&' because of the 2nd predicate.
This generated code looks like "( && Cond2)" and is invalid.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D8294
llvm-svn: 234312
By class-instance values I mean 'Class<Arg>' in 'Class<Arg>.Field' or in
'Other<Class<Arg>>' (syntactically s SimpleValue). This is to differentiate
from unnamed/anonymous record definitions (syntactically an ObjectBody) which
are not affected by this change.
Consider the testcase:
class Struct<int i> {
int I = !shl(i, 1);
int J = !shl(I, 1);
}
class Class<Struct s> {
int Class_J = s.J;
}
multiclass MultiClass<int i> {
def Def : Class<Struct<i>>;
}
defm Defm : MultiClass<2>;
Before this fix, DefmDef.Class_J yields !shl(I, 1) instead of 8.
This is the sequence of events. We start with this:
multiclass MultiClass<int i> {
def Def : Class<Struct<i>>;
}
During ParseDef the anonymous object for the class-instance value is created:
multiclass Multiclass<int i> {
def anonymous_0 : Struct<i>;
def Def : Class<NAME#anonymous_0>;
}
Then class Struct<i> is added to anonymous_0. Also Class<NAME#anonymous_0> is
added to Def:
multiclass Multiclass<int i> {
def anonymous_0 {
int I = !shl(i, 1);
int J = !shl(I, 1);
}
def Def {
int Class_J = NAME#anonymous_0.J;
}
}
So far so good but then we move on to instantiating this in the defm
by substituting the template arg 'i'.
This is how the anonymous prototype looks after fully instantiating.
defm Defm = {
def Defmanonymous_0 {
int I = 4;
int J = !shl(I, 1);
}
Note that we only resolved the reference to the template arg. The
non-template-arg reference in 'J' has not been resolved yet.
Then we go on to instantiating the Def prototype:
def DefmDef {
int Class_J = NAME#anonymous_0.J;
}
Which is resolved to Defmanonymous_0.J and then to !shl(I, 1).
When we fully resolve each record in a defm, Defmanonymous_0.J does get set
to 8 but that's too late for its use.
The patch adds a new attribute to the Record class that indicates that this
def is actually a class-instance value that may be *used* by other defs in a
multiclass. (This is unlike regular defs which don't reference each other and
thus can be resolved indepedently.) They are then fully resolved before the
other defs while the multiclass is instantiated.
I added vg_leak to the new test. I am not sure if this is necessary but I
don't think I have a way to test it. I can also check in without the XFAIL
and let the bots test this part.
Also tested that X86.td.expanded and AAarch64.td.expanded were unchange before
and after this change. (This issue triggering this problem is a WIP patch.)
Part of <rdar://problem/17688758>
llvm-svn: 217886
It also allows nested { } expressions, as now that they are sized, we can merge pull bits from the nested value.
In the current behaviour, everything in { } must have been convertible to a single bit.
However, now that binary literals are sized, its useful to be able to initialize a range of bits.
So, for example, its now possible to do
bits<8> x = { 0, 1, { 0b1001 }, 0, 0b0 }
llvm-svn: 215086
Instead of these becoming an integer literal internally, they now become bits<n> values.
Prior to this change, 0b001 was 1 bit long. This is confusing as clearly the user gave 3 bits.
This new type holds both the literal value and the size, and so can ensure sizes match on initializers.
For example, this used to be legal
bits<1> x = 0b00;
but now it must be written as
bits<2> x = 0b00;
llvm-svn: 215084
Prior to this change, it was legal to do something like
bits<2> opc = { 0, 1 };
bits<2> opc2 = { 1, 0 };
bits<2> a = { opc, opc2 };
This involved silently dropping bits from opc and opc2 which is very hard to debug.
Now the above test would be an error. Having tested with an assert, none of LLVM/clang was relying on this behaviour.
Thanks to Adam Nemet for the above test.
llvm-svn: 215083
file not in the test/ area). Backing out now so that this test isn't part of
the 3.5 branch.
Original commit message: "TableGen: Allow AddedComplexity values to be negative
[...]"
llvm-svn: 213596
This is useful for cases when stand-alone patterns are preferred to the
patterns included in the instruction definitions. Instead of requiring
that stand-alone patterns set a larger AddedComplexity value, which
can be confusing to new developers, the allows us to reduce the
complexity of the included patterns to achieve the same result.
llvm-svn: 213521
Convert the operand to int if possible, i.e. if the value is properly
initialized. (I suppose there is further room for improvement here to also
peform the shift if the uninitialized bits are shifted out.)
With this little change we can now compute the scaling factor for compressed
displacement with pure tablegen code in the X86 backend. This is useful
because both the X86-disassembler-specific part of tablegen and the assembler
need this and TD is the natural sharing place.
The patch also adds the missing documentation for the shift and add operator.
llvm-svn: 213277
Summary:
It concatenates two or more lists. In addition to the !strconcat semantics
the lists must have the same element type.
My overall aim is to make it easy to append to Instruction.Predicates
rather than override it. This can be done by concatenating lists passed as
arguments, or by concatenating lists passed in additional fields.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: hfinkel, llvm-commits
Differential Revision: http://reviews.llvm.org/D3506
llvm-svn: 208183
Summary:
* Updated the documentation
* Added a test for >2 arguments
* Added a check for the lexical concatenation
* Made the existing test a bit stricter.
Reviewers: t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, llvm-commits
Differential Revision: http://reviews.llvm.org/D3485
llvm-svn: 207865
Even within a multiclass, we had been generating concrete implicit anonymous
defs when parsing values (generally in value lists). This behavior was
incorrect, and led to errors when multiclass parameters were used in the
parameter list of the implicit anonymous def.
If we had some multiclass:
multiclass mc<string n> {
... : SomeClass<SomeOtherClass<n> >
The capture of the multiclass parameter 'n' would not work correctly, and
depending on how the implicit SomeOtherClass was used, either TableGen would
ignore something it shouldn't, or would crash.
To fix this problem, when inside a multiclass, we generate prototype anonymous
defs for implicit anonymous defs (just as we do for explicit anonymous defs).
Within the multiclass, the current record prototype is populated with a node
that is essentially: !cast<SomeOtherClass>(!strconcat(NAME, anon_value_name)).
This is then resolved to the correct concrete anonymous def, in the usual way,
when NAME is resolved during multiclass instantiation.
llvm-svn: 198348
TableGen had been generating a different name for an anonymous multiclass's
NAME for every def in the multiclass. This had an unfortunate side effect: it
was impossible to reference one def within the multiclass from another (in the
parameter list, for example). By making sure we only generate an anonymous name
once per multiclass (which, as it turns out, requires only changing the name
parameter to reference type), we can now concatenate NAME within the multiclass
with a def name in order to generate a reference to that def.
This does not matter so much, in and of itself, but is necessary for a
follow-up commit that will fix variable capturing in implicit anonymous
multiclass defs (and that is important).
llvm-svn: 198340
Backends like OptParserEmitter assume that record names can be used as valid
identifiers.
The period '.' in generated anonymous names broke that assumption, causing a
build-time error and in practice forcing all records to be named.
llvm-svn: 197869
In historical reason, tblgen is not strictly required to be free from memory leaks.
For now, I mark them as XFAIL, they could be fixed, though.
llvm-svn: 194353
For two intrinsics 'llvm.nvvm.texsurf.handle' and 'llvm.nvvm.texsurf.handle.internal',
TableGen was emitting matching code like:
if (Name.startswith("llvm.nvvm.texsurf.handle")) ...
if (Name.startswith("llvm.nvvm.texsurf.handle.internal")) ...
We can never match "llvm.nvvm.texsurf.handle.internal" here because it will
always be erroneously matched by the first condition.
The fix is to sort the intrinsic names and emit them in reverse order.
llvm-svn: 187119
DAG arguments can optionally be named:
(dag node, node:$name)
With this change, the node is also optional:
(dag node, node:$name, $name)
The missing node is treated as an UnsetInit, so the above is equivalent
to:
(dag node, node:$name, ?:$name)
This syntax is useful in output patterns where we currently require the
types of variables to be repeated:
def : Pat<(subc i32:$b, i32:$c), (SUBCCrr i32:$b, i32:$c)>;
This is preferable:
def : Pat<(subc i32:$b, i32:$c), (SUBCCrr $b, $c)>;
llvm-svn: 177843
These tests in particular try to use escaped square brackets as an
argument to grep, which is failing for me with native win32 python. It
appears the backslash is being lost near the CreateProcess*() call.
llvm-svn: 173506
- This patch is inspired by the failure of the following code snippet
which is used to convert enumerable values into encoding bits to
improve the readability of td files.
class S<int s> {
bits<2> V = !if(!eq(s, 8), {0, 0},
!if(!eq(s, 16), {0, 1},
!if(!eq(s, 32), {1, 0},
!if(!eq(s, 64), {1, 1}, {?, ?}))));
}
Later, PR8330 is found to report not exactly the same bug relevant
issue to bit/bits values.
- Instead of resolving bit/bits values separately through
resolveBitReference(), this patch adds getBit() for all Inits and
resolves bit value by resolving plus getting the specified bit. This
unifies the resolving of bit with other values and removes redundant
logic for resolving bit only. In addition,
BitsInit::resolveReferences() is optimized to take advantage of this
origanization by resolving VarBitInit's variable reference first and
then getting bits from it.
- The type interference in '!if' operator is revised to support possible
combinations of int and bits/bit in MHS and RHS.
- As there may be illegal assignments from integer value to bit, says
assign 2 to a bit, but we only check this during instantiation in some
cases, e.g.
bit V = !if(!eq(x, 17), 0, 2);
Verbose diagnostic message is generated when invalid value is
resolveed to help locating the error.
- PR8330 is fixed as well.
llvm-svn: 163360
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.
If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.
Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.
Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s
llvm-svn: 159525
Add some data structures to represent for loops. These will be
referenced during object processing to do any needed iteration and
instantiation.
Add foreach keyword support to the lexer.
Add a mode to indicate that we're parsing a foreach loop. This allows
the value parser to early-out when processing the foreach value list.
Add a routine to parse foreach iteration declarations. This is
separate from ParseDeclaration because the type of the named value
(the iterator) doesn't match the type of the initializer value (the
value list). It also needs to add two values to the foreach record:
the iterator and the value list.
Add parsing support for foreach.
Add the code to process foreach loops and create defs based
on iterator values.
Allow foreach loops to be matched at the top level.
When parsing an IDValue check if it is a foreach loop iterator for one
of the active loops. If so, return a VarInit for it.
Add Emacs keyword support for foreach.
Add VIM keyword support for foreach.
Add tests to check foreach operation.
Add TableGen documentation for foreach.
Support foreach with multiple objects.
Support non-braced foreach body with one object.
Do not require types for the foreach declaration. Assume the iterator
type from the iteration list element type.
llvm-svn: 151164
Add a Value named "NAME" to each Record. This will be set to the def or defm
name when instantiating multiclasses. This will replace the #NAME# processing
hack once paste functionality is in place.
llvm-svn: 142518
Multidefs are a bit unwieldy and incomplete. Remove them in favor of
another mechanism, probably for loops.
Revert "Make Test More Thorough"
Revert "Fix a typo."
Revert "Vim Support for Multidefs"
Revert "Emacs Support for Multidefs"
Revert "Document Multidefs"
Revert "Add a Multidef Test"
Revert "Update Test for Multidefs"
Revert "Process Multidefs"
Revert "Parser Multidef Support"
Revert "Lexer Support for Multidefs"
Revert "Add Multidef Data Structures"
llvm-svn: 141378
Add a test to do list manipulation and pass the result as arguments.
This tests the new list element operator resolve code and provides an
example of using list manipulation to do instruction pattern
substitution.
llvm-svn: 141102
A TableGen backend can define how certain classes can be expanded into
ordered sets of defs, typically by evaluating a specific field in the
record. The SetTheory class can then evaluate DAG expressions that refer
to these named sets.
A number of standard set and list operations are predefined, and the
backend can add more specialized operators if needed. The -print-sets
backend is used by SetTheory.td to provide examples.
This is intended to simplify how register classes are defined:
def GR32_NOSP : RegisterClass<"X86", [i32], 32, (sub GR32, ESP)>;
llvm-svn: 132621
class A<bit a, bits<3> x, bits<3> y> {
bits<3> z;
let z = !if(a, x, y);
}
The variable z will get the value of x when 'a' is 1 and 'y' when a is '0'.
llvm-svn: 121666
as the operator of the dag. Specifically, this allows parsing things
like (F.x 4) in addition to just (a 4).
Unfortunately, this runs afoul of an idiom being used by llvmc. It
is using dags like (foo [1,2,3]) to represent a list of stuff being
passed into foo. With this change, this is parsed as a [1,2,3]
subscript on foo instead of being the first argument to the dag.
Cope with this in the short term by requiring a "-llvmc-temp-hack"
argument to tblgen to get the old parsing behavior.
llvm-svn: 115742
Targets must now implement TargetInstrInfo::copyPhysReg instead. There is no
longer a default implementation forwarding to copyRegToReg.
llvm-svn: 108095
Given the pattern below as an example:
list<dag> Pattern = [(set RC:$dst, (v4f32 (shufp:src3 RC:$src1,
(mem_frag addr:$src2))))];
The right reference resolving should lead to:
list<dag> Pattern = [(set VR128:$dst, (v4f32 (shufp:src3 VR128:$src1,
(mem_frag addr:$src2))))];
But was yielding:
list<dag> Pattern = [(set VR128:$dst, (v4f32 (shufp VR128:$src1,
(mem_frag addr:$src2))))];
Fix this by passing the right name when creating a new DagInit node.
llvm-svn: 106670
If a TableGen class has an initializer expression containing an X.Y subexpression,
AND X depends on template parameters,
AND those template parameters have defaults,
AND some parameters with defaults are beyond position 1,
THEN parts of the initializer expression are evaluated prematurely with the default values when the first explicit template parameter is substituted, before the remaining explicit template parameters have been substituted.
llvm-svn: 99492
of runs without leak checking. We add -vg to the triple for non-checked runs,
or -vg_leak for checked runs. Also use this to XFAIL the TableGen tests, since
tablegen leaks like a sieve. This includes some valgrindArgs refactoring.
llvm-svn: 99103
values, resolving references to them, and then removing the definitions.
If a template argument is set to an undefined value, we need to resolve
references to that argument to an explicit undefined value. The current code
leaves the reference to the template argument as it is, which causes an
assertion failure later when the definition of the template argument is
removed.
llvm-svn: 89581
other operators. For the rare cases where a list type cannot be
deduced, provide a []<type> syntax, where <type> is the list element
type.
llvm-svn: 73078
Use it on dags and lists like this:
class decls {
string name;
}
def Decls : decls;
class B<list<string> names> : A<!foreach(Decls.name, names, !strconcat(Decls.name, ", Sr."))>;
llvm-svn: 71803
#NAME# with the name of the defm instantiating the multiclass. This is
useful for AVX instruction naming where a "V" prefix is standard
throughout the ISA. For example:
multiclass SSE_AVX_Inst<...> {
def SS : Instr<...>;
def SD : Instr<...>;
def PS : Instr<...>;
def PD : Instr<...>;
def V#NAME#SS : Instr<...>;
def V#NAME#SD : Instr<...>;
def V#NAME#PS : Instr<...>;
def V#NAME#PD : Instr<...>;
}
defm ADD : SSE_AVX_Inst<...>;
Results in
ADDSS
ADDSD
ADDPS
ADDPD
VADDSS
VADDSD
VADDPS
VADDPD
llvm-svn: 70979
use a SUB instruction instead of an ADD, because -128 can be
encoded in an 8-bit signed immediate field, while +128 can't be.
This avoids the need for a 32-bit immediate field in this case.
A similar optimization applies to 64-bit adds with 0x80000000,
with the 32-bit signed immediate field.
To support this, teach tablegen how to handle 64-bit constants.
llvm-svn: 57663
don't fail when (expected) error output is produced. This fixes 17 tests.
While I was there, I also made all RUN lines of the form "not llvm-as..." a bit
more consistent, they now all redirect stderr and stdout to /dev/null and use
input redirect to read their input.
llvm-svn: 52174
global variables that needed to be passed in. This makes it possible to
add new global variables with only a couple changes (Makefile and llvm-dg.exp)
instead of touching every single dg.exp file.
llvm-svn: 35918
Nicolai Haehnle