This also removes the need to disable the mandatory inlining phase in
tests.
In a departure from the previous remark, we don't output a 'cost' in
this case, because there's no such thing. We just report that inlining
happened because of the attribute.
Differential Revision: https://reviews.llvm.org/D110891
Add a new LLVM switch `-profile-sample-block-accurate` to trust zero block counts for branches. Currently we leave out such zero counts when annotating branch weight metadata, which would lead to weights being considered as unknown.
Differential Revision: https://reviews.llvm.org/D110117
When pre-inliner decision is used for CSSPGO, we should take that into account for ThinLTO importing as well, so post-link sample loader inliner can favor that decision. This is handled by a small tweak in this patch. It also includes a change to transfer preinliner decision when merging context.
Differential Revision: https://reviews.llvm.org/D109088
When preinliner is used for CSSPGO, we try to honor global preinliner decision as much as we can except for uninlinable callees. We rely on InlineCost::Never to prevent us from illegal inlining.
However, it turns out that we use InlineCost::Never for both illeagle inlining and some of the "not-so-beneficial" inlining.
The most common one is recursive inlining, while it can bloat size a lot during CGSCC bottom-up inlining, it's less of a problem when recursive inlining is guided by profile and done in top-down manner.
Ideally it'd be better to have a clear separation between inline legality check vs cost-benefit check, but that requires a bigger change.
This change enables InlineCost computation to allow inlining recursive calls, controlled by InlineParams. In SampleLoader, we now enable recursive inlining for CSSPGO when global preinliner decision is used.
With this change, we saw a few perf improvements on SPEC2017 with CSSPGO and preinliner on: 2% for povray_r, 6% for xalancbmk_s, 3% omnetpp_s, while size is about the same (no noticeable perf change for all other benchmarks)
Differential Revision: https://reviews.llvm.org/D109104
When pre-inliner decision is used for CSSPGO, we should take that into account for ThinLTO importing as well, so post-link sample loader inliner can favor that decision. This is handled by a small tweak in this patch. It also includes a change to transfer preinliner decision when merging context.
Differential Revision: https://reviews.llvm.org/D109088
For CSSPGO, turn on `sample-profile-use-preinliner` by default. This simplifies the use of llvm-profgen preinliner as it's now simply driven by ContextShouldBeInlined flag for each context profile without needing extra compiler switch.
Note that llvm-profgen's preinliner is still off by default, under switch `csspgo-preinliner`.
Differential Revision: https://reviews.llvm.org/D109111
Adding the compiler support of MD5 CS profile based on pervious context split work D107299. A MD5 CS profile is about 40% smaller than the string-based extbinary profile. As a result, the compilation is 15% faster.
There are a few conversion from real names to md5 names that have been made on the sample loader and context tracker side to get it work.
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D108342
The change adds a switch to allow sample loader to use global pre-inliner's decision instead. The pre-inliner in llvm-profgen makes inline decision globally based on whole program profile and function byte size as cost proxy.
Since pre-inliner also adjusts/merges context profile based on its inline decision, honoring its inline decision in sample loader would lead to better post-inline profile quality especially for thinlto where cross module profile merging isn't possible without pre-inliner.
Minor fix in profile reader is also included. When pre-inliner is use, we now also turn off the default merging and trimming logic unless it's explicitly asked.
Differential Revision: https://reviews.llvm.org/D108677
This patch implements Flow Sensitive Sample FDO (FSAFDO) profile
loader. We have two profile loaders for FS profile,
one before RegAlloc and one before BlockPlacement.
To enable it, when -fprofile-sample-use=<profile> is specified,
add "-enable-fs-discriminator=true \
-disable-ra-fsprofile-loader=false \
-disable-layout-fsprofile-loader=false"
to turn on the FS profile loaders.
Differential Revision: https://reviews.llvm.org/D107878
This change slightly relaxed the current ICP threshold in top-down inliner, specifically always allow one ICP for it. It shows some perf improvements on SPEC and our internal benchmarks. Also renamed the previous flag. We can also try to turn off PGO ICP in the future.
Reviewed By: wenlei, hoy, wmi
Differential Revision: https://reviews.llvm.org/D106588
Iterative-BFI produces better count quality and performance when evaluated on internal benchmarks. Turning it on by default now for CSSPGO. We can consider turn it on by default for AutoFDO as well in the future.
Differential Revision: https://reviews.llvm.org/D106202
This patch teaches the sample profile loader to merge function
attributes after inlining functions.
Without this patch, the compiler could inline a function requiring the
512-bit vector width into its caller without merging function
attributes, triggering a failure during instruction selection.
Differential Revision: https://reviews.llvm.org/D105729
As a follow-up to https://reviews.llvm.org/D104129, I'm cleaning up the danling probe related code in both the compiler and llvm-profgen.
I'm seeing a 5% size win for the pseudo_probe section for SPEC2017 and 10% for Ciner. Certain benchmark such as 602.gcc has a 20% size win. No obvious difference seen on build time for SPEC2017 and Cinder.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D104477
This patch was split from https://reviews.llvm.org/D102246
[SampleFDO] New hierarchical discriminator for Flow Sensitive SampleFDO
This is for llvm-profdata part of change. It sets the bit masks for the
profile reader in llvm-profdata. Also add an internal option
"-fs-discriminator-pass" for show and merge command to process the profile
offline.
This patch also moved setDiscriminatorMaskedBitFrom() to
SampleProfileReader::create() to simplify the interface.
Differential Revision: https://reviews.llvm.org/D103550
This patch was split from https://reviews.llvm.org/D102246
[SampleFDO] New hierarchical discriminator for Flow Sensitive SampleFDO
This is mainly for ProfileData part of change. It will load
FS Profile when such profile is detected. For an extbinary format profile,
create_llvm_prof tool will add a flag to profile summary section.
For other format profiles, the users need to use an internal option
(-profile-isfs) to tell the compiler that the profile uses FS discriminators.
This patch also simplified the bit API used by FS discriminators.
Differential Revision: https://reviews.llvm.org/D103041
Sample profile loader can be run in both LTO prelink and postlink. Currently the counts annoation in postilnk doesn't fully overwrite what's done in prelink. I'm adding a switch (`-overwrite-existing-weights=1`) to enable a full overwrite, which includes:
1. Clear old metadata for calls when their parent block has a zero count. This could be caused by prelink code duplication.
2. Clear indirect call metadata if somehow all the rest targets have a sum of zero count.
3. Overwrite branch weight for basic blocks.
With a CS profile, I was seeing #1 and #2 help reduce code size by preventing post-sample ICP and CGSCC inliner working on obsolete metadata, which come from a partial global inlining in prelink. It's not expected to work well for non-CS case with a less-accurate post-inline count quality.
It's worth calling out that some prelink optimizations can damage counts quality in an irreversible way. One example is the loop rotate optimization. Due to lack of exact loop entry count (profiling can only give loop iteration count and loop exit count), moving one iteration out of the loop body leaves the rest iteration count unknown. We had to turn off prelink loop rotate to achieve a better postlink counts quality. A even better postlink counts quality can be archived by turning off prelink CGSCC inlining which is not context-sensitive.
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D102537
findIndirectCallFunctionSamples will leave Sum uninitialized if it returns an empty vector, we don't really use Sum in this case (but we do make a copy that isn't used either) - so ensure we initialize the value to zero to at least silence the static analysis warning.
Currently we didn't support multiple return type, we work around to use error_code to represent:
1) The dangling probe.
2) Ignore the weight of non-probe instruction
While merging the instructions' weight for the whole BB, it will filter out the error code. But If all instructions of the BB give error_code, the outside logic will mark it as a BB requiring the inference algorithm to infer its weight. This is different from the zero value which will be treated as a cold block.
Fix one place that if we can't find the FunctionSamples in the profile data which indicates the BB is cold, we choose to return zero.
Also refine the comments.
Reviewed By: hoy, wenlei
Differential Revision: https://reviews.llvm.org/D102007
Pseudo probe distribution factor is used to scale down profile samples to avoid misleading the counts inference due to the usage of "maximum" in `getBlockWeight`. For callsites, the scaling down can come from code duplication prior to the sample profile loader (prelink or postlink), or due to the indirect call promotion in sample loader inliner. This patch fixes an issue in sample loader ICP where the leftover indirect callsite scaling down causes the loss of non-promoted call target samples unexpectedly. While the scaling down is to favor BFI/BPI with accurate an callsite count, it doesn't fit in the current distribution factor that represents code duplication changes. Ideally, we would need two factors, one is for code duplication, the other is for ICP. However this seems over complicated. I'm going to trade one usage (callsite counts) for the other (call target counts).
Seeing perf win on one benchmark (mcf) of SPEC2017 with others unchanged.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D100993
We see a regression related to low probe factor(0.01) which prevents some callsites being promoted in ICPPass and later cause the missing inline in CGSCC inliner. The root cause is due to redundant(the second) multiplication of the probe factor and this change try to fix it.
`Sum` does multiply a factor right after findCallSamples but later when using as the parameter in setProbeDistributionFactor, it multiplies one again.
This change could get ~2% perf back on mcf benchmark. In mcf, previously the corresponding factor is 1 and it's the recent feature introducing the <1 factor then trigger this bug.
Reviewed By: hoy, wenlei
Differential Revision: https://reviews.llvm.org/D99787
Currently prof metadata with branch counts is added only for BranchInst and SwitchInst, but not for IndirectBrInst. As a result, BPI/BFI make incorrect inferences for indirect branches, which can be very hot.
This diff adds metadata for IndirectBrInst, in addition to BranchInst and SwitchInst.
Reviewed By: wmi, wenlei
Differential Revision: https://reviews.llvm.org/D99550
Use profiled call edges to augment the top-down order. There are cases that the top-down order computed based on the static call graph doesn't reflect real execution order. For example:
1. Incomplete static call graph due to unknown indirect call targets. Adjusting the order by considering indirect call edges from the profile can enable the inlining of indirect call targets by allowing the caller processed before them.
2. Mutual call edges in an SCC. The static processing order computed for an SCC may not reflect the call contexts in the context-sensitive profile, thus may cause potential inlining to be overlooked. The function order in one SCC is being adjusted to a top-down order based on the profile to favor more inlining.
3. Transitive indirect call edges due to inlining. When a callee function is inlined into into a caller function in LTO prelink, every call edge originated from the callee will be transferred to the caller. If any of the transferred edges is indirect, the original profiled indirect edge, even if considered, would not enforce a top-down order from the caller to the potential indirect call target in LTO postlink since the inlined callee is gone from the static call graph.
4. #3 can happen even for direct call targets, due to functions defined in header files. Header functions, when included into source files, are defined multiple times but only one definition survives due to ODR. Therefore, the LTO prelink inlining done on those dropped definitions can be useless based on a local file scope. More importantly, the inlinee, once fully inlined to a to-be-dropped inliner, will have no profile to consume when its outlined version is compiled. This can lead to a profile-less prelink compilation for the outlined version of the inlinee function which may be called from external modules. while this isn't easy to fix, we rely on the postlink AutoFDO pipeline to optimize the inlinee. Since the survived copy of the inliner (defined in headers) can be inlined in its local scope in prelink, it may not exist in the merged IR in postlink, and we'll need the profiled call edges to enforce a top-down order for the rest of the functions.
Considering those cases, a profiled call graph completely independent of the static call graph is constructed based on profile data, where function objects are not even needed to handle case #3 and case 4.
I'm seeing an average 0.4% perf win out of SPEC2017. For certain benchmark such as Xalanbmk and GCC, the win is bigger, above 2%.
The change is an enhancement to https://reviews.llvm.org/D95988.
Reviewed By: wmi, wenlei
Differential Revision: https://reviews.llvm.org/D99351
This change sets up a framework in llvm-profgen to estimate inline decision and adjust context-sensitive profile based on that. We call it a global pre-inliner in llvm-profgen.
It will serve two purposes:
1) Since context profile for not inlined context will be merged into base profile, if we estimate a context will not be inlined, we can merge the context profile in the output to save profile size.
2) For thinLTO, when a context involving functions from different modules is not inined, we can't merge functions profiles across modules, leading to suboptimal post-inline count quality. By estimating some inline decisions, we would be able to adjust/merge context profiles beforehand as a mitigation.
Compiler inline heuristic uses inline cost which is not available in llvm-profgen. But since inline cost is closely related to size, we could get an estimate through function size from debug info. Because the size we have in llvm-profgen is the final size, it could also be more accurate than the inline cost estimation in the compiler.
This change only has the framework, with a few TODOs left for follow up patches for a complete implementation:
1) We need to retrieve size for funciton//inlinee from debug info for inlining estimation. Currently we use number of samples in a profile as place holder for size estimation.
2) Currently the thresholds are using the values used by sample loader inliner. But they need to be tuned since the size here is fully optimized machine code size, instead of inline cost based on not yet fully optimized IR.
Differential Revision: https://reviews.llvm.org/D99146
When prioritize call site to consider for inlining in sample loader, use number of samples as a first tier breaker before using name/guid comparison. This would favor smaller functions when hotness is the same (from the same block). We could try to retrieve accurate function size if this turns out to be more important.
Differential Revision: https://reviews.llvm.org/D99370
value profile annotated after inlining.
In https://reviews.llvm.org/D96806 and https://reviews.llvm.org/D97350, we
use the magic number -1 in the value profile to avoid repeated indirect call
promotion to the same target for an indirect call. Function updateIDTMetaData
is used to mark an target as being promoted in the value profile with the
magic number. updateIDTMetaData is also used to update the value profile
when an indirect call is inlined and new inline instance profile should be
applied. For the second case, currently updateIDTMetaData mixes up the
existing value profile of the indirect call with the new profile, leading
to the problematic senario that a target count is larger than the total count
in the value profile.
The patch fixes the problem. When updateIDTMetaData is used to update the
value profile after inlining, all the values in the existing value profile
will be dropped except the values with the magic number counts.
Differential Revision: https://reviews.llvm.org/D98835
For ThinLTO's prelink compilation, we need to put external inline candidates into an import list attached to function's entry count metadata. This enables ThinLink to treat such cross module callee as hot in summary index, and later helps postlink to import them for profile guided cross module inlining.
For AutoFDO, the import list is retrieved by traversing the nested inlinee functions. For CSSPGO, since profile is flatterned, a few things need to happen for it to work:
- When loading input profile in extended binary format, we need to load all child context profile whose parent is in current module, so context trie for current module includes potential cross module inlinee.
- In order to make the above happen, we need to know whether input profile is CSSPGO profile before start reading function profile, hence a flag for profile summary section is added.
- When searching for cross module inline candidate, we need to walk through the context trie instead of nested inlinee profile (callsite sample of AutoFDO profile).
- Now that we have more accurate counts with CSSPGO, we swtiched to use entry count instead of total count to decided if an external callee is potentially beneficial to inline. This make it consistent with how we determine whether call tagert is potential inline candidate.
Differential Revision: https://reviews.llvm.org/D98590
For CGSCC inline, we need to scale down a function's branch weights and entry counts when thee it's inlined at a callsite. This is done through updateCallProfile. Additionally, we also scale the weigths for the inlined clone based on call site count in updateCallerBFI. Neither is needed for inlining during sample profile loader as it's using context profile that is separated from inlinee's own profile. This change skip the inlinee profile scaling for sample loader inlining.
Differential Revision: https://reviews.llvm.org/D98187
now -funique-internal-linkage-name flag is available, and we want to flip
it on by default since it is beneficial to have separate sample profiles
for different internal symbols with the same name. As a preparation, we
want to avoid regression caused by the flip.
When we flip -funique-internal-linkage-name on, the profile is collected
from binary built without -funique-internal-linkage-name so it has no uniq
suffix, but the IR in the optimized build contains the suffix. This kind of
mismatch may introduce transient regression.
To avoid such mismatch, we introduce a NameTable section flag indicating
whether there is any name in the profile containing uniq suffix. Compiler
will decide whether to keep uniq suffix during name canonicalization
depending on the NameTable section flag. The flag is only available for
extbinary format. For other formats, by default compiler will keep uniq
suffix so they will only experience transient regression when
-funique-internal-linkage-name is just flipped.
Another type of regression is caused by places where we miss to call
getCanonicalFnName. Those places are fixed.
Differential Revision: https://reviews.llvm.org/D96932
For CS profile, the callsite count of previously inlined callees is populated with the entry count of the callees. Therefore when trying to get a weight for calliste probe after inlinining, the callsite count should always be used. The same fix has already been made for non-probe case.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D98094
sample loader pass.
In https://reviews.llvm.org/rG5fb65c02ca5e91e7e1a00e0efdb8edc899f3e4b9,
to prevent repeated indirect call promotion for the same indirect call
and the same target, we used zero-count value profile to indicate an
indirect call has been promoted for a certain target. We removed
PromotedInsns cache in the same patch. However, there was a problem in
that patch described below, and that problem led me to add PromotedInsns
back as a mitigation in
https://reviews.llvm.org/rG4ffad1fb489f691825d6c7d78e1626de142f26cf.
When we get value profile from metadata by calling getValueProfDataFromInst,
we need to specify the maximum possible number of values we expect to read.
We uses MaxNumPromotions in the last patch so the maximum number of value
information extracted from metadata is MaxNumPromotions. If we have many
values including zero-count values when we write the metadata, some of them
will be dropped when we read them because we only read MaxNumPromotions
values. It will allow repeated indirect call promotion again. We need to
make sure if there are values indicating promoted targets, those values need
to be saved in metadata with higher priority than other values.
The patch fixed that problem. We change to use -1 to represent the count
of a promoted target instead of 0 so it is easier to sort the values.
When we prepare to update the metadata in updateIDTMetaData, we will sort
the values in the descending count order and extract only MaxNumPromotions
values to write into metadata. Since -1 is the max uint64_t number, if we
have equal to or less than MaxNumPromotions of -1 count values, they will
all be kept in metadata. If we have more than MaxNumPromotions of -1 count
values, we will only save MaxNumPromotions such values maximally. In such
case, we have logic in place in doesHistoryAllowICP to guarantee no more
promotion in sample loader pass will happen for the indirect call, because
it has been promoted enough.
With this change, now we can remove PromotedInsns without problem.
Differential Revision: https://reviews.llvm.org/D97350
This change fixes a couple places where the pseudo probe intrinsic blocks optimizations because they are not naturally removable. To unblock those optimizations, the blocking pseudo probes are moved out of the original blocks and tagged dangling, instead of allowing pseudo probes to be literally removed. The reason is that when the original block is removed, we won't be able to sample it. Instead of assigning it a zero weight, moving all its pseudo probes into another block and marking them dangling should allow the counts inference a chance to assign them a more reasonable weight. We have not seen counts quality degradation from our experiments.
The optimizations being unblocked are:
1. Removing conditional probes for if-converted branches. Conditional probes are tagged dangling when their homing branch arms are folded so that they will not be over-counted.
2. Unblocking jump threading from removing empty blocks. Pseudo probe prevents jump threading from removing logically empty blocks that only has one unconditional jump instructions.
3. Unblocking SimplifyCFG and MIR tail duplicate to thread empty blocks and blocks with redundant branch checks.
Since dangling probes are logically deleted, they should not consume any samples in LTO postLink. This can be achieved by setting their distribution factors to zero when dangled.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D97481
This patch makes SampleProfileLoaderBaseImpl a template class so it
can be used in CodeGen transformation.
Noticeable changes:
* use one template parameter and use IRTraits to get other used
types an type specific functions.
* remove the temporary "inline" keywords in previous refactor
patch.
* change the template function findEquivalencesFor to a regular
function. This function has a single caller with type of
PostDominatorTree. It's simpler to use the type directly
because MachinePostDominatorTree is not a derived type of
template DominatorTreeBase.
Differential Revision: https://reviews.llvm.org/D96981
In https://reviews.llvm.org/rG5fb65c02ca5e91e7e1a00e0efdb8edc899f3e4b9,
We use 0 count value profile to memorize which target has been promoted
and prevent repeated ICP for the same target, so we delete PromotedInsns.
However, I found the implementation in the patch has some shortcomings
to be fixed otherwise there will still be repeated ICP. So I add
PromotedInsns back temorarily. Will remove it after I get a thorough fix.
Found a problem in indirect call promotion in sample loader pass. Currently
if an indirect call is promoted for a target, and if the parent function is
inlined into some other function, the indirect call can be promoted for the
same target again. That is redundent which can harm performance and can cause
excessive compile time in some extreme case.
The patch fixes the issue. If a target is promoted for an indirect call, the
patch will write ICP metadata with the target call count being set to 0.
In the later ICP in sample profile loader, if it sees a target has 0 count
for an indirect call, it knows the target has been promoted and won't do
indirect call promotion for the indirect call.
The fix brings 0.1~0.2% performance on our search benchmark.
Differential Revision: https://reviews.llvm.org/D96806
With CSSPGO all indirect call targets are counted torwards the original indirect call site in the profile, including both inlined and non-inlined targets. Therefore no need to look for callee entry counts. This also fixes the issue where callee entry count doesn't match callsite count due to the nature of CS sampling.
I'm also cleaning up the orginal code that called `findIndirectCallFunctionSamples` just to compute the sum, the return value of which was disgarded.
Reviewed By: wmi, wenlei
Differential Revision: https://reviews.llvm.org/D96990
Apply the patch for the third time after fixing buildbot failures.
Refactor SampleProfile.cpp to use the core code in CodeGen.
The main changes are:
(1) Move SampleProfileLoaderBaseImpl class to a header file.
(2) Split SampleCoverageTracker to a head file and a cpp file.
(3) Move the common codes (common options and callsiteIsHot())
to the common cpp file.
(4) Add inline keyword to avoid duplicated symbols -- they will
be removed later when the class is changed to a template.
Differential Revision: https://reviews.llvm.org/D96455
Revert "[SampleFDO] Add missing #includes to unbreak modules build after D96455"
This reverts commit c73cbf218a.
Revert "[SampleFDO] Fix MSVC "namespace uses itself" warning (NFC)"
This reverts commit a23e6b321c.
Revert "[SampleFDO] Reapply: Refactor SampleProfile.cpp"
This reverts commit 6fd5ccff72.
Still seeing link failures when building llc (or other tools), due to
the new SampleProfileLoaderBaseImpl.h containing definitions that get
duplicated across multiple TU's.
```
duplicate symbol 'llvm::SampleProfileLoaderBaseImpl::findEquivalenceClasses(llvm::Function&)' in:
tools/llc/CMakeFiles/llc.dir/llc.cpp.o
lib/libLLVMInstCombine.a(InstCombineVectorOps.cpp.o)
duplicate symbol 'llvm::SampleProfileLoaderBaseImpl::buildEdges(llvm::Function&)' in:
tools/llc/CMakeFiles/llc.dir/llc.cpp.o
lib/libLLVMInstCombine.a(InstCombineVectorOps.cpp.o)
duplicate symbol 'llvm::SampleProfileLoaderBaseImpl::computeDominanceAndLoopInfo(llvm::Function&)' in:
tools/llc/CMakeFiles/llc.dir/llc.cpp.o
lib/libLLVMInstCombine.a(InstCombineVectorOps.cpp.o)
duplicate symbol 'llvm::SampleProfileLoaderBaseImpl::getFunctionLoc(llvm::Function&)' in:
tools/llc/CMakeFiles/llc.dir/llc.cpp.o
lib/libLLVMInstCombine.a(InstCombineVectorOps.cpp.o)
duplicate symbol 'llvm::SampleProfileLoaderBaseImpl::getBlockWeight(llvm::BasicBlock const*)' in:
tools/llc/CMakeFiles/llc.dir/llc.cpp.o
lib/libLLVMInstCombine.a(InstCombineVectorOps.cpp.o)
duplicate symbol 'llvm::SampleProfileLoaderBaseImpl::printBlockWeight(llvm::raw_ostream&, llvm::BasicBlock const*) const' in:
tools/llc/CMakeFiles/llc.dir/llc.cpp.o
lib/libLLVMInstCombine.a(InstCombineVectorOps.cpp.o)
duplicate symbol 'llvm::SampleProfileLoaderBaseImpl::printBlockEquivalence(llvm::raw_ostream&, llvm::BasicBlock const*)' in:
tools/llc/CMakeFiles/llc.dir/llc.cpp.o
lib/libLLVMInstCombine.a(InstCombineVectorOps.cpp.o)
duplicate symbol 'llvm::SampleProfileLoaderBaseImpl::printEdgeWeight(llvm::raw_ostream&, std::__1::pair<llvm::BasicBlock const*, llvm::BasicBlock const*>)' in:
tools/llc/CMakeFiles/llc.dir/llc.cpp.o
lib/libLLVMInstCombine.a(InstCombineVectorOps.cpp.o)
```
Reapply patch after fixing buildbot failure.
Refactor SampleProfile.cpp to use the core code in CodeGen.
The main changes are:
(1) Move SampleProfileLoaderBaseImpl class to a header file.
(2) Split SampleCoverageTracker to a head file and a cpp file.
(3) Move the common codes (common options and callsiteIsHot())
to the common cpp file.
Differential Revision: https://reviews.llvm.org/D96455
This reverts commit 310b35304c.
The build is broken with -DBUILD_SHARED_LIBS=ON :
lib/ProfileData/CMakeFiles/LLVMProfileData.dir/SampleProfileLoaderBaseUtil.cpp.o: In function `llvm::sampleprofutil::callsiteIsHot(llvm::sampleprof::FunctionSamples const*, llvm::ProfileSummaryInfo*, bool)':
SampleProfileLoaderBaseUtil.cpp:(.text._ZN4llvm14sampleprofutil13callsiteIsHotEPKNS_10sampleprof15FunctionSamplesEPNS_18ProfileSummaryInfoEb+0x1a): undefined reference to `llvm::ProfileSummaryInfo::isColdCount(unsigned long) const'
SampleProfileLoaderBaseUtil.cpp:(.text._ZN4llvm14sampleprofutil13callsiteIsHotEPKNS_10sampleprof15FunctionSamplesEPNS_18ProfileSummaryInfoEb+0x28): undefined reference to `llvm::ProfileSummaryInfo::isHotCount(unsigned long) const'
...
Refactor SampleProfile.cpp to use the core code in CodeGen.
The main changes are:
(1) Move SampleProfileLoaderBaseImpl class to a header file.
(2) Split SampleCoverageTracker to a head file and a cpp file.
(3) Move the common codes (common options and callsiteIsHot())
to the common cpp file.
Differential Revision: https://reviews.llvm.org/D96455
Functions are currently processed by the sample profiler loader in a top-down order defined by the static call graph. The order is being adjusted to be a top-down order based on the input context-sensitive profile. One benefit is that the processing order of caller and callee in one SCC would follow the context order in the profile to favor more inlining. Another benefit is that the processing order of caller and callee through an indirect call (which is not on the static call graph) can be honored which in turn allows for more inlining.
The profile top-down order for SCC is also extended to support non-CS profiles.
Two switches `-mllvm -use-profile-indirect-call-edges` and `-mllvm -use-profile-top-down-order` are being introduced.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D95988
Break SampleProfileLoader into to a base and a derived class.
Base class (SampleProfileLoaderBaseImpl) includes the common
code for IR and MachineIR (CodeGen) sample loader.
It will be templatelized in the later patch.
Inline and Probe related code will remain in the derived class of
SampleProfileLoader and stays in SampleProfile.cpp.
We need to refactor some functions:
(1) getInstWeight() to enable the code sharing -- put the core into
getInstWeightImpl().
(2) emitAnnotation() and propagateWeights() to carve out the code
specific to SampleProfileLoader.
(3) make getInstWeight() and findFunctionSamples() virtual and override
in SampleProfileLoader as they need to access the fields in the derived
class.
Differential Revision: https://reviews.llvm.org/D95832
This patch detaches SampleProfileLoader from class
SampleCoverageTracker. We plan to move SampleProfileLoader
to a template class. This would remain SampleCoverageTracker
as a class.
Also make callsiteIsHot() as a file static function.
Differential Revision: https://reviews.llvm.org/D95823
Sample re-annotation is required in LTO time to achieve a reasonable post-inline profile quality. However, we have seen that such LTO-time re-annotation degrades profile quality. This is mainly caused by preLTO code duplication that is done by passes such as loop unrolling, jump threading, indirect call promotion etc, where samples corresponding to a source location are aggregated multiple times due to the duplicates. In this change we are introducing a concept of distribution factor for pseudo probes so that samples can be distributed for duplicated probes scaled by a factor. We hope that optimizations duplicating code well-maintain the branch frequency information (BFI) based on which probe distribution factors are calculated. Distribution factors are updated at the end of preLTO pipeline to reflect an estimated portion of the real execution count.
This change also introduces a pseudo probe verifier that can be run after each IR passes to detect duplicated pseudo probes.
A saturated distribution factor stands for 1.0. A pesudo probe will carry a factor with the value ranged from 0.0 to 1.0. A 64-bit integral distribution factor field that represents [0.0, 1.0] is associated to each block probe. Unfortunately this cannot be done for callsite probes due to the size limitation of a 32-bit Dwarf discriminator. A 7-bit distribution factor is used instead.
Changes are also needed to the sample profile inliner to deal with prorated callsite counts. Call sites duplicated by PreLTO passes, when later on inlined in LTO time, should have the callees’s probe prorated based on the Prelink-computed distribution factors. The distribution factors should also be taken into account when computing hotness for inline candidates. Also, Indirect call promotion results in multiple callisites. The original samples should be distributed across them. This is fixed by adjusting the callisites' distribution factors.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D93264
Refactoring SampleProfileLoader::inlineHotFunctions to use helpers from CSSPGO inlining and reduce similar code in the inlining loop, plus minor cleanup for AFDO path.
This is resubmit of D95024, with build break and overtighten assertion fixed.
Test Plan:
Mircea Trofin