Print aliases in topological order, that is, for any alias a = b,
b must be printed before a. This is because on some targets (e.g. PowerPC)
linker expects aliases in such an order to generate correct TOC information.
GCC also prints aliases in topological order.
llvm-svn: 265064
Patch by Jonas Paulsson. Original description:
Bugfix in buildSchedGraph() to make -dag-maps-huge-region work properly
I found that the reduction of the maps did in fact never happen in this
test case. This was because *all* the stores / loads were made with
addresses from arguments and they thus became "unknown" stores / loads.
Fixed by removing continue statements and making sure that the test for
reduction always takes place.
Differential Revision: http://reviews.llvm.org/D18673
llvm-svn: 265063
"blockaddress" can not apply to an external function. All
blockaddress constant uses must belong to the same module as the
definition of the target function.
llvm-svn: 265061
This patch simply mirrors the attributes we give to @llvm.nvvm.reflect
to the __nvvm_reflect libdevice call. This shaves about 30% of the code
in libdevice away because of CSE opportunities. It's also helps us
figure out that libdevice implementations of transcendental functions
don't have side-effects.
llvm-svn: 265060
Some targets might require creation of thunks. For example, MIPS targets
require stubs to call PIC code from non-PIC one. The patch implements
infrastructure for thunk code creation and provides support for MIPS
LA25 stubs. Any MIPS PIC code function is invoked with its address
in register $t9. So if we have a branch instruction from non-PIC code
to the PIC one we cannot make the jump directly and need to create a small
stub to save the target function address.
See page 3-38 ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
- In relocation scanning phase we ask target about thunk creation necessity
by calling `TagetInfo::needsThunk` method. The `InputSection` class
maintains list of Symbols requires thunk creation.
- Reassigning offsets performed for each input sections after relocation
scanning complete because position of each section might change due
thunk creation.
- The patch introduces new dedicated value for DefinedSynthetic symbols
DefinedSynthetic::SectionEnd. Synthetic symbol with that value always
points to the end of the corresponding output section. That allows to
escape updating synthetic symbols if output sections sizes changes after
relocation scanning due thunk creation.
- In the `InputSection::writeTo` method we write thunks after corresponding
input section. Each thunk is written by calling `TargetInfo::writeThunk` method.
- The patch supports the only type of thunk code for each target. For now,
it is enough.
Differential Revision: http://reviews.llvm.org/D17934
llvm-svn: 265059
For debugging it is useful to be able to generate dSYM files but not strip the executables. This change adds the ability to skip stripping by setting COMPILER_RT_EXTERNALIZE_DEBUGINFO_SKIP_STRIP=On.
llvm-svn: 265057
Summary:
This change will allow loads with imp-def to be clustered in machine-scheduler pass.
areMemAccessesTriviallyDisjoint() can also handle loads with imp-def.
Reviewers: mcrosier, jmolloy, t.p.northover
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18665
llvm-svn: 265051
Chapter 3 of the QPX manual states that, "Scalar floating-point load
instructions, defined in the Power ISA, cause a replication of the source data
across all elements of the target register." Thus, if we have a load followed
by a QPX splat (from the first lane), the splat is redundant. This adds a late
MI-level pass to remove the redundant splats in some of these cases
(specifically when both occur in the same basic block).
This optimization is scheduled just prior to post-RA scheduling. It can't happen
before anything that might replace the load with some already-computed quantity
(i.e. store-to-load forwarding).
llvm-svn: 265047
We don't really support non-constant shuffle masks, but these tests are for cases where BUILD_VECTOR is made up from vector extracts (as well as undef/zero scalars).
llvm-svn: 265045
For debugging it is useful to be able to generate dSYM files but not strip the executables. This change adds the ability to skip stripping by setting LLVM_EXTERNALIZE_DEBUGINFO_SKIP_STRIP=On.
llvm-svn: 265041
Whatever crash it was there to present appears to have been fixed in the
backend now, and it had the nasty side-effect of causing clang to exit(0) and
leave a .o containing goodness knows what even when an error hit.
llvm-svn: 265038
Value profiling should not profile constants and/or constant
expressions when they appear as callees in call instructions.
Constant expressions form when a direct callee has bitcasts or
inttoptr(ptrtint (callee)) nests surrounding it. Value profiling
should avoid instrumenting such cases. Mostly NFC.
llvm-svn: 265037
This will become necessary in a subsequent change to make this method
merge adjacent stack adjustments, i.e. it might erase the previous
and/or next instruction.
It also greatly simplifies the calls to this function from Prolog-
EpilogInserter. Previously, that had a bunch of logic to resume iteration
after the call; now it just continues with the returned iterator.
Note that this changes the behaviour of PEI a little. Previously,
it attempted to re-visit the new instruction created by
eliminateCallFramePseudoInstr(). That code was added in r36625,
but I can't see any reason for it: the new instructions will obviously
not be pseudo instructions, they will not have FrameIndex operands,
and we have already accounted for the stack adjustment.
Differential Revision: http://reviews.llvm.org/D18627
llvm-svn: 265036
Summary:
Upstream googletest prints "Running main() from gtest_main.cc" to stdout prior
to running tests. LLVM removed that print statement in r61540. If a user were
to use lit to run tests that use upstream googletest, however, lit
reports "Running main()" as an invalid test name.
To avoid such a failure, add an extra conditional to `formats/googletest.py`.
Also add tests to demonstrate the modified behavior.
Reviewers: abdulras, ddunbar
Subscribers: ddunbar, llvm-commits, kastiglione
Differential Revision: http://reviews.llvm.org/D18606
llvm-svn: 265034
isBrImm should accept any non-constant immediate. Previously it was only accepting LanaiMCExpr ones which was wrong.
Differential Revision: http://reviews.llvm.org/D18571
llvm-svn: 265032
The test case added in r265023 is failing on ninja-x64-msvc-RA-centos6.
Update the test to make less specific assumptions on code generation.
llvm-svn: 265026
If the lhs is evaluated before the rhs, FuncletI's operator-> can trigger the
assert(isHandleInSync() && "invalid iterator access!");
at include/llvm/ADT/DenseMap.h:1061. (Happens e.g. when compiled with GCC 6.)
Differential Revision: http://reviews.llvm.org/D18440
llvm-svn: 265024
PPCSimplifyAddress contains this code:
IntegerType *OffsetTy = ((VT == MVT::i32) ? Type::getInt32Ty(*Context)
: Type::getInt64Ty(*Context));
to determine the type to be used for an index register, if one needs
to be created. However, the "VT" here is the type of the data being
loaded or stored, *not* the type of an address. This means that if
a data element of type i32 is accessed using an index that does not
not fit into 32 bits, a wrong address is computed here.
Note that PPCFastISel is only ever used on 64-bit currently, so the type
of an address is actually *always* MVT::i64. Other parts of the code,
even in this same PPCSimplifyAddress routine, already rely on that fact.
Thus, this patch changes the code to simply unconditionally use
Type::getInt64Ty(*Context) as OffsetTy.
llvm-svn: 265023
This patch corresponds to review:
http://reviews.llvm.org/D18032
This patch provides asm implementation for the following instructions:
lwat, ldat, stwat, stdat, ldmx, mcrxrx
llvm-svn: 265022
Summary:
This change will handle missing store pair opportunity where the first store
instruction stores zero followed by the non-zero store. For example, this change
will convert :
str wzr, [x8]
str w1, [x8, #4]
into:
stp wzr, w1, [x8]
Reviewers: jmolloy, t.p.northover, mcrosier
Subscribers: flyingforyou, aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18570
llvm-svn: 265021
The fast isel pass currently emits a COPY_TO_REGCLASS node to convert
from a F4RC to a F8RC register class during conversion of a
floating-point number to integer. There is actually no support in the
common code instruction printers to emit COPY_TO_REGCLASS nodes, so the
PowerPC back-end has special code there to simply ignore
COPY_TO_REGCLASS.
This is correct *if and only if* the source and destination registers of
COPY_TO_REGCLASS are the same (except for the different register class).
But nothing guarantees this to be the case, and if the register
allocator does end up allocating source and destination to different
registers after all, the back-end simply generates incorrect code. I've
included a test case that shows such incorrect code generation.
However, it seems that COPY_TO_REGCLASS is actually not intended to be
used at the MI layer at all. It is used during SelectionDAG, but always
lowered to a plain COPY before emitting MI. Other back-end's fast isel
passes never emit COPY_TO_REGCLASS at all. I suspect it is simply wrong
for the PowerPC back-end to emit it here.
This patch changes the PowerPC back-end to directly emit COPY instead of
COPY_TO_REGCLASS and removes the special handling in the instruction
printers.
Differential Revision: http://reviews.llvm.org/D18605
llvm-svn: 265020
Summary:
There are too many instructions to exhaustively test so addiu and lwc2 are
used as representative examples.
It should be noted that many memory instructions that should have simm16
range checking do not because it is also necessary to support the macro
of the same name which accepts simm32. The range checks for these occur in
the macro expansion.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18437
llvm-svn: 265019
Summary:
ldc2/sdc2 now emit slightly worse diagnostics for MIPS-I. The problem
is that they don't trigger the custom parser because all the candidates
are disabled by feature bits. On all other subtargets, the diagnostics are
accurate but are subject to the usual issues of needing to report multiple
ways to correct the code (e.g. smaller offset, enable a CPU feature) but
only being able to report one error.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18436
llvm-svn: 265018
Summary:
Debug info is used only by the client and lldb-server tests do not even have the client component
running, as they communicate with the server directly. Therefore, running the tests for each
debug info type is unnecessarry.
This adds general ability to mark a test class as not dependent on debug info, and marks all
lldb-server tests as such.
Reviewers: tberghammer, tfiala
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18598
llvm-svn: 265017
Peter Collingbourne