the chrono library there uses long long as the underlying chrono type, but
defines int64_t as long (or the other way around, I am not sure). In any case,
this caused the implicit conversion to not trigger. This should address that.
Also fix up the relevant unit test.
llvm-svn: 287867
Summary:
This replaces the usage of raw integers with duration classes in the gdb-remote
packet management functions. The values are still converted back to integers once
they go into the generic Communication class -- that I am leaving to a separate
change.
The changes are mostly straight-forward (*), the only tricky part was
representation of infinite timeouts.
Currently, we use UINT32_MAX to denote infinite timeout. This is not well suited
for duration classes, as they tend to do arithmetic on the values, and the
identity of the MAX value can easily get lost (e.g.
microseconds(seconds(UINT32_MAX)).count() != UINT32_MAX). We cannot use zero to
represent infinity (as Listener classes do) because we already use it to do
non-blocking polling reads. For this reason, I chose to have an explicit value
for infinity.
The way I achieved that is via llvm::Optional, and I think it reads quite
natural. Passing llvm::None as "timeout" means "no timeout", while passing zero
means "poll". The only tricky part is this breaks implicit conversions (seconds
are implicitly convertible to microseconds, but Optional<seconds> cannot be
easily converted into Optional<microseconds>). For this reason I added a special
class Timeout, inheriting from Optional, and enabling the necessary conversions
one would normally expect.
(*) The other tricky part was GDBRemoteCommunication::PopPacketFromQueue, which
was needlessly complicated. I've simplified it, but that one is only used in
non-stop mode, and so is untested.
Reviewers: clayborg, zturner, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26971
llvm-svn: 287864
r287386 added a \x13 character inside a string literal. Most likely this
was by mistake, so remove it.
Differential Revision: https://reviews.llvm.org/D26973
llvm-svn: 287862
Summary:
This patch changes the way ProcessElfCore.cpp handles signal information.
The patch changes ProcessElfCore.cpp to use the signal from si_signo in SIGINFO notes in preference to the value of cursig in PRSTATUS notes. The value from SIGINFO seems to be more thread specific. The value from PRSTATUS is usually the same for all threads even if only one thread received a signal.
If it cannot find any SIGINFO blocks it reverts to the old behaviour and uses the value from cursig in PRSTATUS. If after that no thread appears to have been stopped it forces the status of the first thread to be SIGSTOP to prevent lldb hanging waiting for any thread from the core file to change state.
The order is:
- If one or more threads have a non-zero si_signo in SIGINFO that will be used.
- If no threads had a SIGINFO block with a non-zero si_signo set all threads signals to the value in cursig in their PRSTATUS notes.
- If no thread has a signal set to a non-zero value set the signal for only the first thread to SIGSTOP.
This resolves two issues. The first was identified in bug 26322, the second became apparent while investigating this problem and looking at the signal values reported for each thread via “thread list”.
Firstly lldb is able to load core dumps generated by gcore where each thread has a SIGINFO note containing a signal number but cursig in the PRSTATUS block for each thread is 0.
Secondly if a SIGINFO note was found the “thread list” command will no longer show the same signal number for all threads. At the moment if a process crashes, for example with SIGILL, all threads will show “stop reason = signal SIGILL”. With this patch only the thread that executed the illegal instruction shows that stop reason. The other threads show “stop reason = signal 0”.
Reviewers: jingham, clayborg
Subscribers: sas, labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D26676
llvm-svn: 287858
source/Plugins/DynamicLoader/Darwin-Kernel/DynamicLoaderDarwinKernel.cpp:403:21: warning: comparison of integers of different signs: 'int' and 'size_t' (aka 'unsigned long') [-Wsign-compare]
for (int i = 0; i < llvm::array_lengthof (magicks); i++)
~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Differential Revision: https://reviews.llvm.org/D27081
llvm-svn: 287848
The Windows process plugin was broken up into multiple pieces a while back in
order to share code between debugging live processes and minidumps
(postmortem) debugging. The minidump portion was replaced by a cross-platform
solution. This left the plugin split into a formerly "common" base classes and
the derived classes for live debugging. This extra layer made the code harder
to understand and work with.
This patch simplifies these class hierarchies by rolling the live debugging
concrete classes up to the base classes. Last week I posted my intent to make
this change to lldb-dev, and I didn't hear any objections.
This involved moving code and changing references to classes like
ProcessWindowsLive to ProcessWindows. It still builds for both 32- and 64-bit,
and the tests still pass on 32-bit. (Tests on 64-bit weren't passing before
this refactor for unrelated reasons.)
llvm-svn: 287770
Summary:
Improve detection of global vs local variables.
Currently when a global variable is optimized out or otherwise has an unknown
location (DW_AT_location is empty) it gets reported as local.
I added two new heuristics:
- if a mangled name is present, the variable is global (or static)
- if DW_AT_location is present but invalid, the variable is global (or static)
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26908
llvm-svn: 287636
The long-term goal here is to get rid of the functions
GetArgumentAtIndex() and GetQuoteCharAtIndex(), instead
replacing them with operator based access and range-based for
enumeration. There are a lot of callsites, though, so the
changes will be done incrementally, starting with this one.
Differential Revision: https://reviews.llvm.org/D26883
llvm-svn: 287597
This is to fix a regression in remote-linux lldb-server connections.
We were wrongly passing a copy of uri and expecting a stringRef back.
llvm-svn: 287542
Summary:
The floating-point and SSE registers could be present in the elf-core
file in the note NT_FPREGSET for 64 bit ones, and in the note
NT_PRXFPREG for 32 bit ones.
The entire note is a binary blob matching the layout of the x87 save
area that gets generated by the FXSAVE instruction (see Intel developers
manual for more information).
This CL mainly modifies the RegisterRead function in
RegisterContextPOSIXCore_x86_64 for it to return the correct data both
for GPR and FPR/SSE registers, and return false (meaning "this register
is not available") for other registers.
I added a test to TestElfCore.py that tests reading FPR/SSE registers
both from a 32 and 64 bit elf-core file and I have inluded the source
which I used to generate the core files.
I tried to also add support for the AVX registers, because this info could
also be present in the elf-core file (note NT_X86_XSTATE - that is the result of
the newer XSAVE instruction). Parsing the contents from the file is
easy. The problem is that the ymm registers are split into two halves
and they are in different places in the note. For making this work one
would either make a "hacky" approach, because there won't be
any other way with the current state of the register contexts - they
assume that "this register is of size N and at offset M" and
don't have the notion of discontinuos registers.
Reviewers: labath
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D26300
llvm-svn: 287506
This patch updates a bunch of places where add_dependencies was being explicitly called to add dependencies on intrinsics_gen to instead use the DEPENDS named parameter. This cleanup is needed for a patch I'm working on to add a dependency debugging mode to the build system.
llvm-svn: 287408
This concludes the changes I originally tried to make and then
had to back out. This way if anything is still broken, it
should be easier to bisect it back to a more specific changeset.
llvm-svn: 287367
The scanning algorithm had a few little subtleties that I
overlooked, but this patch should fix everything.
I still haven't changed the function to take a StringRef since
that has some trickle down effect and is mostly mechanical,
I just wanted to get the tricky part as isolated as possible.
llvm-svn: 287354
This argument was only used in one place in the codebase, and
it was in a non-critical log statement and can be easily
substituted for an equally meaningful field instead. The
payoff of computing this value is not worth the added
complexity.
llvm-svn: 287315
Apparently these two enormous functions were dead. Which is
good, since one was largely a copy of another function with
only a few minor tweaks.
llvm-svn: 287308
Originally I converted this entire function and all dependents
to use StringRef, but there were some test failures that
were tricky to track down, as this is a complicated function.
So I'm starting over, this time in smaller increments.
llvm-svn: 287307
In the process, found some functions that were duplicates of
existing StringRef member functions. So deleted those functions
and used the StringRef functions instead.
llvm-svn: 287279
Summary:
Fix step-over when SymbolContext.function is missing and symbol is present.
With targets from our build configuration,
ThreadPlanStepOverRange::IsEquivalentContext fails to fire for relevant frames,
leading to ShouldStop() returning true prematurely.
The frame's SymbolContext, and m_addr_context have:
- comp_unit set and matching
- function = nullptr
- symbol set and matching (but this is never checked)
My naive guess is that the context should be equivalent in this case :-)
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26804
llvm-svn: 287274
This was a bit tricky, especially for things like
OptionValueArray and OptionValueDictionary since they do some
funky string parsing. Rather than try to re-write line-by-line
I tried to make the StringRef usage idiomatic, even though
it meant often re-writing from scratch large blocks of code
in a different way while keeping true to the original intent.
The finished code is a big improvement though, and often much
shorter than the original code. All tests and unit tests
pass on Windows and Linux.
llvm-svn: 287242
Also significantly reduced the indentation level by use of
early returns, and simplified some of the logic by using
StringRef functions such as consumeInteger() and getAsInteger()
instead of strtoll, etc.
llvm-svn: 287189
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
With the cross-platform minidump plugin working, the Windows-specific one is no longer needed. This eliminates the unnecessary code.
This does not eliminate the Windows-specific tests, as they hit a few cases the general tests don't. (The Windows-specific tests are currently passing.) I'll look into a separate patch to make sure we're not doing too much duplicate testing.
After that I might do a little re-org in the Windows plugin, as there was some factoring there (Common & Live) that probably isn't necessary anymore.
Differential Revision: https://reviews.llvm.org/D26697
llvm-svn: 287113
Summary:
All usages have been replaced by appropriate std::chrono funcionality, and the
class is now unused. The only used part of the cpp file is the DumpTimePoint
function, which I have moved into the only caller (CommandObjectTarget.cpp).
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D26451
llvm-svn: 287096
Pavel Labath