Commit Graph

50 Commits

Author SHA1 Message Date
Nirav Dave d1b3f09faa [X86][DAG] Switch X86 Target to post-legalized store merge
Move store merge to happen after intrinsic lowering to allow lowered
stores to be merged.

Some regressions due in MergeConsecutiveStores to missing
insert_subvector that are addressed in follow up patch.

Reviewers: craig.topper, efriedma, RKSimon

Subscribers: llvm-commits

Differential Revision: https://reviews.llvm.org/D34559

llvm-svn: 310710
2017-08-11 13:21:35 +00:00
Daniel Jasper 559aa75382 Revert "r306529 - [X86] Correct dwarf unwind information in function epilogue"
I am 99% sure that this breaks the PPC ASAN build bot:
http://lab.llvm.org:8011/builders/sanitizer-ppc64be-linux/builds/3112/steps/64-bit%20check-asan/logs/stdio

If it doesn't go back to green, we can recommit (and fix the original
commit message at the same time :) ).

llvm-svn: 306676
2017-06-29 13:58:24 +00:00
Petar Jovanovic 7b3a38ec30 [X86] Correct dwarf unwind information in function epilogue
CFI instructions that set appropriate cfa offset and cfa register are now
inserted in emitEpilogue() in X86FrameLowering.

Majority of the changes in this patch:

1. Ensure that CFI instructions do not affect code generation.
2. Enable maintaining correct information about cfa offset and cfa register
in a function when basic blocks are reordered, merged, split, duplicated.

These changes are target independent and described below.

Changed CFI instructions so that they:

1. are duplicable
2. are not counted as instructions when tail duplicating or tail merging
3. can be compared as equal

Add information to each MachineBasicBlock about cfa offset and cfa register
that are valid at its entry and exit (incoming and outgoing CFI info). Add
support for updating this information when basic blocks are merged, split,
duplicated, created. Add a verification pass (CFIInfoVerifier) that checks
that outgoing cfa offset and register of predecessor blocks match incoming
values of their successors.

Incoming and outgoing CFI information is used by a late pass
(CFIInstrInserter) that corrects CFA calculation rule for a basic block if
needed. That means that additional CFI instructions get inserted at basic
block beginning to correct the rule for calculating CFA. Having CFI
instructions in function epilogue can cause incorrect CFA calculation rule
for some basic blocks. This can happen if, due to basic block reordering,
or the existence of multiple epilogue blocks, some of the blocks have wrong
cfa offset and register values set by the epilogue block above them.

Patch by Violeta Vukobrat.

Differential Revision: https://reviews.llvm.org/D18046

llvm-svn: 306529
2017-06-28 10:21:17 +00:00
Simon Pilgrim 46dd55f1e1 [X86][SSE] Change BUILD_VECTOR interleaving ordering to improve coalescing/combine opportunities
We currently generate BUILD_VECTOR as a tree of UNPCKL shuffles of the same type:

e.g. for v4f32:

Step 1: unpcklps 0, 2 ==> X: <?, ?, 2, 0>
      : unpcklps 1, 3 ==> Y: <?, ?, 3, 1>
Step 2: unpcklps X, Y ==>    <3, 2, 1, 0>

The issue is because we are not placing sequential vector elements together early enough, we fail to recognise many combinable patterns - consecutive scalar loads, extractions etc.

Instead, this patch unpacks progressively larger sequential vector elements together:

e.g. for v4f32:

Step 1: unpcklps 0, 2 ==> X: <?, ?, 1, 0>
      : unpcklps 1, 3 ==> Y: <?, ?, 3, 2>
Step 2: unpcklpd X, Y ==>    <3, 2, 1, 0>

This does mean that we are creating UNPCKL shuffle of different value types, but the relevant combines that benefit from this are quite capable of handling the additional BITCASTs that are now included in the shuffle tree.

Differential Revision: https://reviews.llvm.org/D33864

llvm-svn: 304688
2017-06-04 20:12:04 +00:00
Hans Wennborg b00ffd8cb7 Revert r302938 "Add LiveRangeShrink pass to shrink live range within BB."
This also reverts follow-ups r303292 and r303298.

It broke some Chromium tests under MSan, and apparently also internal
tests at Google.

llvm-svn: 303369
2017-05-18 18:50:05 +00:00
Dehao Chen 65dd23e273 Add LiveRangeShrink pass to shrink live range within BB.
Summary: LiveRangeShrink pass moves instruction right after the definition with the same BB if the instruction and its operands all have more than one use. This pass is inexpensive and guarantees optimal live-range within BB.

Reviewers: davidxl, wmi, hfinkel, MatzeB, andreadb

Reviewed By: MatzeB, andreadb

Subscribers: hiraditya, jyknight, sanjoy, skatkov, gberry, jholewinski, qcolombet, javed.absar, krytarowski, atrick, spatel, RKSimon, andreadb, MatzeB, mehdi_amini, mgorny, efriedma, davide, dberlin, llvm-commits

Differential Revision: https://reviews.llvm.org/D32563

llvm-svn: 302938
2017-05-12 19:29:27 +00:00
Michael Kuperstein 6129887d21 [X86] Revert r299387 due to AVX legalization infinite loop.
llvm-svn: 299720
2017-04-06 22:33:25 +00:00
Simon Pilgrim af33757b5d [X86][SSE]] Lower BUILD_VECTOR with repeated elts as BUILD_VECTOR + VECTOR_SHUFFLE
It can be costly to transfer from the gprs to the xmm registers and can prevent loads merging.

This patch splits vXi16/vXi32/vXi64 BUILD_VECTORS that use the same operand in multiple elements into a BUILD_VECTOR with only a single insertion of each of those elements and then performs an unary shuffle to duplicate the values.

There are a couple of minor regressions this patch unearths due to some missing MOVDDUP/BROADCAST folds that I will address in a future patch.

Note: Now that vector shuffle lowering and combining is pretty good we should be reusing that instead of duplicating so much in LowerBUILD_VECTOR - this is the first of several patches to address this.

Differential Revision: https://reviews.llvm.org/D31373

llvm-svn: 299387
2017-04-03 21:06:51 +00:00
Simon Pilgrim a2b81dc411 Regenerate test
The CHECK-DAG aren't necessary and get in the way of automated checks

llvm-svn: 298802
2017-03-26 10:31:37 +00:00
Nirav Dave 54e22f33d9 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Recommiting with compiler time improvements

    Recommitting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.

    * Simplify Consecutive Merge Store Candidate Search

    Now that address aliasing is much less conservative, push through
    simplified store merging search and chain alias analysis which only
    checks for parallel stores through the chain subgraph. This is cleaner
    as the separation of non-interfering loads/stores from the
    store-merging logic.

    When merging stores search up the chain through a single load, and
    finds all possible stores by looking down from through a load and a
    TokenFactor to all stores visited.

    This improves the quality of the output SelectionDAG and the output
    Codegen (save perhaps for some ARM cases where we correctly constructs
    wider loads, but then promotes them to float operations which appear
    but requires more expensive constant generation).

    Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)

    Additional Minor Changes:

      1. Finishes removing unused AliasLoad code

      2. Unifies the chain aggregation in the merged stores across code
         paths

      3. Re-add the Store node to the worklist after calling
         SimplifyDemandedBits.

      4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
         arbitrary, but seems sufficient to not cause regressions in
         tests.

      5. Remove Chain dependencies of Memory operations on CopyfromReg
         nodes as these are captured by data dependence

      6. Forward loads-store values through tokenfactors containing
          {CopyToReg,CopyFromReg} Values.

      7. Peephole to convert buildvector of extract_vector_elt to
         extract_subvector if possible (see
         CodeGen/AArch64/store-merge.ll)

      8. Store merging for the ARM target is restricted to 32-bit as
         some in some contexts invalid 64-bit operations are being
         generated. This can be removed once appropriate checks are
         added.

    This finishes the change Matt Arsenault started in r246307 and
    jyknight's original patch.

    Many tests required some changes as memory operations are now
    reorderable, improving load-store forwarding. One test in
    particular is worth noting:

      CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
      forwarding converts a load-store pair into a parallel store and
      a memory-realized bitcast of the same value. However, because we
      lose the sharing of the explicit and implicit store values we
      must create another local store. A similar transformation
      happens before SelectionDAG as well.

    Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

llvm-svn: 297695
2017-03-14 00:34:14 +00:00
Chandler Carruth ce52b80744 [SDAG] Revert r296476 (and r296486, r296668, r296690).
This patch causes compile times for some patterns to explode. I have
a (large, unreduced) test case that slows down by more than 20x and
several test cases slow down by 2x. I'm sending some of the test cases
directly to Nirav and following up with more details in the review log,
but this should unblock anyone else hitting this.

llvm-svn: 296862
2017-03-03 10:02:25 +00:00
Nirav Dave f830dec3f2 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.

    * Simplify Consecutive Merge Store Candidate Search

    Now that address aliasing is much less conservative, push through
    simplified store merging search and chain alias analysis which only
    checks for parallel stores through the chain subgraph. This is cleaner
    as the separation of non-interfering loads/stores from the
    store-merging logic.

    When merging stores search up the chain through a single load, and
    finds all possible stores by looking down from through a load and a
    TokenFactor to all stores visited.

    This improves the quality of the output SelectionDAG and the output
    Codegen (save perhaps for some ARM cases where we correctly constructs
    wider loads, but then promotes them to float operations which appear
    but requires more expensive constant generation).

    Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)

    Additional Minor Changes:

      1. Finishes removing unused AliasLoad code

      2. Unifies the chain aggregation in the merged stores across code
         paths

      3. Re-add the Store node to the worklist after calling
         SimplifyDemandedBits.

      4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
         arbitrary, but seems sufficient to not cause regressions in
         tests.

      5. Remove Chain dependencies of Memory operations on CopyfromReg
         nodes as these are captured by data dependence

      6. Forward loads-store values through tokenfactors containing
          {CopyToReg,CopyFromReg} Values.

      7. Peephole to convert buildvector of extract_vector_elt to
         extract_subvector if possible (see
         CodeGen/AArch64/store-merge.ll)

      8. Store merging for the ARM target is restricted to 32-bit as
         some in some contexts invalid 64-bit operations are being
         generated. This can be removed once appropriate checks are
         added.

    This finishes the change Matt Arsenault started in r246307 and
    jyknight's original patch.

    Many tests required some changes as memory operations are now
    reorderable, improving load-store forwarding. One test in
    particular is worth noting:

      CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
      forwarding converts a load-store pair into a parallel store and
      a memory-realized bitcast of the same value. However, because we
      lose the sharing of the explicit and implicit store values we
      must create another local store. A similar transformation
      happens before SelectionDAG as well.

    Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

llvm-svn: 296476
2017-02-28 14:24:15 +00:00
Nirav Dave 73cd0194cf Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
This reverts commit r296252 until 256-bit operations are more efficiently generated in X86.

llvm-svn: 296279
2017-02-26 01:27:32 +00:00
Nirav Dave beabf456df In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.

    * Simplify Consecutive Merge Store Candidate Search

    Now that address aliasing is much less conservative, push through
    simplified store merging search and chain alias analysis which only
    checks for parallel stores through the chain subgraph. This is cleaner
    as the separation of non-interfering loads/stores from the
    store-merging logic.

    When merging stores search up the chain through a single load, and
    finds all possible stores by looking down from through a load and a
    TokenFactor to all stores visited.

    This improves the quality of the output SelectionDAG and the output
    Codegen (save perhaps for some ARM cases where we correctly constructs
    wider loads, but then promotes them to float operations which appear
    but requires more expensive constant generation).

    Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)

    Additional Minor Changes:

      1. Finishes removing unused AliasLoad code

      2. Unifies the chain aggregation in the merged stores across code
         paths

      3. Re-add the Store node to the worklist after calling
         SimplifyDemandedBits.

      4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
         arbitrary, but seems sufficient to not cause regressions in
         tests.

      5. Remove Chain dependencies of Memory operations on CopyfromReg
         nodes as these are captured by data dependence

      6. Forward loads-store values through tokenfactors containing
          {CopyToReg,CopyFromReg} Values.

      7. Peephole to convert buildvector of extract_vector_elt to
         extract_subvector if possible (see
         CodeGen/AArch64/store-merge.ll)

      8. Store merging for the ARM target is restricted to 32-bit as
         some in some contexts invalid 64-bit operations are being
         generated. This can be removed once appropriate checks are
         added.

    This finishes the change Matt Arsenault started in r246307 and
    jyknight's original patch.

    Many tests required some changes as memory operations are now
    reorderable, improving load-store forwarding. One test in
    particular is worth noting:

      CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
      forwarding converts a load-store pair into a parallel store and
      a memory-realized bitcast of the same value. However, because we
      lose the sharing of the explicit and implicit store values we
      must create another local store. A similar transformation
      happens before SelectionDAG as well.

    Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

llvm-svn: 296252
2017-02-25 11:43:58 +00:00
Simon Pilgrim a4c350ff17 [X86][SSE] Add (V)MOVD folding pattern with zextloadi64i32 load node.
Fixes PRPR31309

llvm-svn: 295492
2017-02-17 20:43:32 +00:00
Simon Pilgrim e5215751ff [X86][SSE] Add PR31309 test case (load-extend i32 to i128).
llvm-svn: 295363
2017-02-16 19:17:36 +00:00
Nirav Dave 93f9d5ce04 Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
This reverts commit r293893 which is miscompiling lua on ARM and
bootstrapping for x86-windows.

llvm-svn: 293915
2017-02-02 18:24:55 +00:00
Nirav Dave 4442667fc5 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Recommiting after fixing X86 inc/dec chain bug.

    * Simplify Consecutive Merge Store Candidate Search

    Now that address aliasing is much less conservative, push through
    simplified store merging search and chain alias analysis which only
    checks for parallel stores through the chain subgraph. This is cleaner
    as the separation of non-interfering loads/stores from the
    store-merging logic.

    When merging stores search up the chain through a single load, and
    finds all possible stores by looking down from through a load and a
    TokenFactor to all stores visited.

    This improves the quality of the output SelectionDAG and the output
    Codegen (save perhaps for some ARM cases where we correctly constructs
    wider loads, but then promotes them to float operations which appear
    but requires more expensive constant generation).

    Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)

    Additional Minor Changes:

      1. Finishes removing unused AliasLoad code

      2. Unifies the chain aggregation in the merged stores across code
         paths

      3. Re-add the Store node to the worklist after calling
         SimplifyDemandedBits.

      4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
         arbitrary, but seems sufficient to not cause regressions in
         tests.

      5. Remove Chain dependencies of Memory operations on CopyfromReg
         nodes as these are captured by data dependence

      6. Forward loads-store values through tokenfactors containing
          {CopyToReg,CopyFromReg} Values.

      7. Peephole to convert buildvector of extract_vector_elt to
         extract_subvector if possible (see
         CodeGen/AArch64/store-merge.ll)

      8. Store merging for the ARM target is restricted to 32-bit as
         some in some contexts invalid 64-bit operations are being
         generated. This can be removed once appropriate checks are
         added.

    This finishes the change Matt Arsenault started in r246307 and
    jyknight's original patch.

    Many tests required some changes as memory operations are now
    reorderable, improving load-store forwarding. One test in
    particular is worth noting:

      CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
      forwarding converts a load-store pair into a parallel store and
      a memory-realized bitcast of the same value. However, because we
      lose the sharing of the explicit and implicit store values we
      must create another local store. A similar transformation
      happens before SelectionDAG as well.

    Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

llvm-svn: 293893
2017-02-02 14:39:42 +00:00
Nirav Dave d32a421f75 Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
This reverts commit r293184 which is failing in LTO builds

llvm-svn: 293188
2017-01-26 16:46:13 +00:00
Nirav Dave de6516c466 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
* Simplify Consecutive Merge Store Candidate Search

    Now that address aliasing is much less conservative, push through
    simplified store merging search and chain alias analysis which only
    checks for parallel stores through the chain subgraph. This is cleaner
    as the separation of non-interfering loads/stores from the
    store-merging logic.

    When merging stores search up the chain through a single load, and
    finds all possible stores by looking down from through a load and a
    TokenFactor to all stores visited.

    This improves the quality of the output SelectionDAG and the output
    Codegen (save perhaps for some ARM cases where we correctly constructs
    wider loads, but then promotes them to float operations which appear
    but requires more expensive constant generation).

    Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)

    Additional Minor Changes:

      1. Finishes removing unused AliasLoad code

      2. Unifies the chain aggregation in the merged stores across code
         paths

      3. Re-add the Store node to the worklist after calling
         SimplifyDemandedBits.

      4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
         arbitrary, but seems sufficient to not cause regressions in
         tests.

      5. Remove Chain dependencies of Memory operations on CopyfromReg
         nodes as these are captured by data dependence

      6. Forward loads-store values through tokenfactors containing
          {CopyToReg,CopyFromReg} Values.

      7. Peephole to convert buildvector of extract_vector_elt to
         extract_subvector if possible (see
         CodeGen/AArch64/store-merge.ll)

      8. Store merging for the ARM target is restricted to 32-bit as
         some in some contexts invalid 64-bit operations are being
         generated. This can be removed once appropriate checks are
         added.

    This finishes the change Matt Arsenault started in r246307 and
    jyknight's original patch.

    Many tests required some changes as memory operations are now
    reorderable, improving load-store forwarding. One test in
    particular is worth noting:

      CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
      forwarding converts a load-store pair into a parallel store and
      a memory-realized bitcast of the same value. However, because we
      lose the sharing of the explicit and implicit store values we
      must create another local store. A similar transformation
      happens before SelectionDAG as well.

    Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

llvm-svn: 293184
2017-01-26 16:02:24 +00:00
Simon Pilgrim e940daf532 [X86][SSE] Add support for combining target shuffles to SHUFPS.
As discussed on D27692, the next step will be to allow cross-domain shuffles once the combined shuffle depth passes a certain point.

llvm-svn: 290064
2016-12-18 14:26:02 +00:00
Simon Pilgrim d7518896ff [X86][SSE] Fix domains for VZEXT_LOAD type instructions
Add the missing domain equivalences for movss, movsd, movd and movq zero extending loading instructions.

Differential Revision: https://reviews.llvm.org/D27684

llvm-svn: 289825
2016-12-15 16:05:29 +00:00
Nirav Dave f5bf03c7ef Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
Reverting due to ARM MCJIT and MIPS LLD error.

This reverts commit r289659.

llvm-svn: 289667
2016-12-14 16:43:44 +00:00
Nirav Dave 8527ab0ad2 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Retrying after fixing after removing load-store factoring through
token factors in favor of improved token factor operand pruning

Simplify Consecutive Merge Store Candidate Search

Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.

Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).

Additional Minor Changes:

   1. Finishes removing unused AliasLoad code
   2. Unifies the the chain aggregation in the merged stores across
      code paths
   3. Re-add the Store node to the worklist after calling
      SimplifyDemandedBits.
   4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
      arbitrary, but seemed sufficient to not cause regressions in
      tests.

This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.

Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations

Noteworthy tests:

    CodeGen/AArch64/argument-blocks.ll -
      It's not entirely clear what the test_varargs_stackalign test is
      supposed to be asserting, but the new code looks right.

    CodeGen/AArch64/arm64-memset-inline.lli -
    CodeGen/AArch64/arm64-stur.ll -
    CodeGen/ARM/memset-inline.ll -

      The backend now generates *worse* code due to store merging
      succeeding, as we do do a 16-byte constant-zero store efficiently.

    CodeGen/AArch64/merge-store.ll -
      Improved, but there still seems to be an extraneous vector insert
      from an element to itself?

    CodeGen/PowerPC/ppc64-align-long-double.ll -
      Worse code emitted in this case, due to the improved store->load
      forwarding.

    CodeGen/X86/dag-merge-fast-accesses.ll -
    CodeGen/X86/MergeConsecutiveStores.ll -
    CodeGen/X86/stores-merging.ll -
    CodeGen/Mips/load-store-left-right.ll -
      Restored correct merging of non-aligned stores

    CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
      Improved. Correctly merges buffer_store_dword calls

    CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
      Improved. Sidesteps loading a stored value and
      merges two stores

    CodeGen/X86/pr18023.ll -
      This test has been removed, as it was asserting incorrect
      behavior. Non-volatile stores *CAN* be moved past volatile loads,
      and now are.

    CodeGen/X86/vector-idiv.ll -
    CodeGen/X86/vector-lzcnt-128.ll -
      It's basically impossible to tell what these tests are actually
      testing. But, looks like the code got better due to the memory
      operations being recognized as non-aliasing.

    CodeGen/X86/win32-eh.ll -
      Both loads of the securitycookie are now merged.

Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel

Differential Revision: https://reviews.llvm.org/D14834

llvm-svn: 289659
2016-12-14 15:44:26 +00:00
Nirav Dave bedb5d906c Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
This reverts commit r289221 which appears to be triggering an assertion

llvm-svn: 289226
2016-12-09 17:18:24 +00:00
Nirav Dave fd51ff4fd8 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Retrying after fixing overly aggressive load-store forwarding optimization.

Simplify Consecutive Merge Store Candidate Search

Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.

Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).

Additional Minor Changes:

   1. Finishes removing unused AliasLoad code
   2. Unifies the the chain aggregation in the merged stores across
      code paths
   3. Re-add the Store node to the worklist after calling
      SimplifyDemandedBits.
   4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
      arbitrary, but seemed sufficient to not cause regressions in
      tests.

This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.

Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations

Noteworthy tests:

    CodeGen/AArch64/argument-blocks.ll -
      It's not entirely clear what the test_varargs_stackalign test is
      supposed to be asserting, but the new code looks right.

    CodeGen/AArch64/arm64-memset-inline.lli -
    CodeGen/AArch64/arm64-stur.ll -
    CodeGen/ARM/memset-inline.ll -

      The backend now generates *worse* code due to store merging
      succeeding, as we do do a 16-byte constant-zero store efficiently.

    CodeGen/AArch64/merge-store.ll -
      Improved, but there still seems to be an extraneous vector insert
      from an element to itself?

    CodeGen/PowerPC/ppc64-align-long-double.ll -
      Worse code emitted in this case, due to the improved store->load
      forwarding.

    CodeGen/X86/dag-merge-fast-accesses.ll -
    CodeGen/X86/MergeConsecutiveStores.ll -
    CodeGen/X86/stores-merging.ll -
    CodeGen/Mips/load-store-left-right.ll -
      Restored correct merging of non-aligned stores

    CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
      Improved. Correctly merges buffer_store_dword calls

    CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
      Improved. Sidesteps loading a stored value and
      merges two stores

    CodeGen/X86/pr18023.ll -
      This test has been removed, as it was asserting incorrect
      behavior. Non-volatile stores *CAN* be moved past volatile loads,
      and now are.

    CodeGen/X86/vector-idiv.ll -
    CodeGen/X86/vector-lzcnt-128.ll -
      It's basically impossible to tell what these tests are actually
      testing. But, looks like the code got better due to the memory
      operations being recognized as non-aliasing.

    CodeGen/X86/win32-eh.ll -
      Both loads of the securitycookie are now merged.

Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel

Differential Revision: https://reviews.llvm.org/D14834

llvm-svn: 289221
2016-12-09 16:15:12 +00:00
Simon Pilgrim 8893bd95f0 [X86][SSE] Consistently set MOVD/MOVQ load/store/move instructions to integer domain
We are being inconsistent with these instructions (and all their variants.....) with a random mix of them using the default float domain.

Differential Revision: https://reviews.llvm.org/D27419

llvm-svn: 288902
2016-12-07 12:10:49 +00:00
Matthias Braun 39c3c89cdc MCStreamer: Use "cfi" for CFI related temp labels.
Choosing a "cfi" name makes the intend a bit clearer in an assembly dump
and more importantly the assembly dumps are slightly more stable as the
numbers don't move around anymore when unrelated code calls
createTempSymbol() more or less often.
As they are temp labels the name doesn't influence the generated object
code.

Differential Revision: https://reviews.llvm.org/D27244

llvm-svn: 288290
2016-11-30 23:48:26 +00:00
Nirav Dave a81682aad4 Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
This reverts commit r284151 which appears to be triggering a LTO
failures on Hexagon

llvm-svn: 284157
2016-10-13 20:23:25 +00:00
Nirav Dave 4b36957243 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Retrying after upstream changes.

   Simplify Consecutive Merge Store Candidate Search

   Now that address aliasing is much less conservative, push through
   simplified store merging search which only checks for parallel stores
   through the chain subgraph. This is cleaner as the separation of
   non-interfering loads/stores from the store-merging logic.

   Whem merging stores, search up the chain through a single load, and
   finds all possible stores by looking down from through a load and a
   TokenFactor to all stores visited. This improves the quality of the
   output SelectionDAG and generally the output CodeGen (with some
   exceptions).

   Additional Minor Changes:

       1. Finishes removing unused AliasLoad code
       2. Unifies the the chain aggregation in the merged stores across
       code paths
       3. Re-add the Store node to the worklist after calling
       SimplifyDemandedBits.
       4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
       arbitrary, but seemed sufficient to not cause regressions in
       tests.

   This finishes the change Matt Arsenault started in r246307 and
   jyknight's original patch.

   Many tests required some changes as memory operations are now
   reorderable. Some tests relying on the order were changed to use
   volatile memory operations

   Noteworthy tests:

    CodeGen/AArch64/argument-blocks.ll -
      It's not entirely clear what the test_varargs_stackalign test is
      supposed to be asserting, but the new code looks right.

    CodeGen/AArch64/arm64-memset-inline.lli -
    CodeGen/AArch64/arm64-stur.ll -
    CodeGen/ARM/memset-inline.ll -

      The backend now generates *worse* code due to store merging
      succeeding, as we do do a 16-byte constant-zero store efficiently.

    CodeGen/AArch64/merge-store.ll -
      Improved, but there still seems to be an extraneous vector insert
      from an element to itself?

    CodeGen/PowerPC/ppc64-align-long-double.ll -
      Worse code emitted in this case, due to the improved store->load
      forwarding.

    CodeGen/X86/dag-merge-fast-accesses.ll -
    CodeGen/X86/MergeConsecutiveStores.ll -
    CodeGen/X86/stores-merging.ll -
    CodeGen/Mips/load-store-left-right.ll -
      Restored correct merging of non-aligned stores

    CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
      Improved. Correctly merges buffer_store_dword calls

    CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
      Improved. Sidesteps loading a stored value and
      merges two stores

    CodeGen/X86/pr18023.ll -
      This test has been removed, as it was asserting incorrect
      behavior. Non-volatile stores *CAN* be moved past volatile loads,
      and now are.

    CodeGen/X86/vector-idiv.ll -
    CodeGen/X86/vector-lzcnt-128.ll -
      It's basically impossible to tell what these tests are actually
      testing. But, looks like the code got better due to the memory
      operations being recognized as non-aliasing.

    CodeGen/X86/win32-eh.ll -
      Both loads of the securitycookie are now merged.

    CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
      This test appears to work but no longer exhibits the spill behavior.

Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle

Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel

Differential Revision: https://reviews.llvm.org/D14834

llvm-svn: 284151
2016-10-13 19:20:16 +00:00
Nirav Dave e524f50882 Revert "In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled."
This reverts commit r282600 due to test failues with MCJIT

llvm-svn: 282604
2016-09-28 16:37:50 +00:00
Nirav Dave e17e055b75 In visitSTORE, always use FindBetterChain, rather than only when UseAA is enabled.
Simplify Consecutive Merge Store Candidate Search

  Now that address aliasing is much less conservative, push through
  simplified store merging search which only checks for parallel stores
  through the chain subgraph. This is cleaner as the separation of
  non-interfering loads/stores from the store-merging logic.

  Whem merging stores, search up the chain through a single load, and
  finds all possible stores by looking down from through a load and a
  TokenFactor to all stores visited. This improves the quality of the
  output SelectionDAG and generally the output CodeGen (with some
  exceptions).

  Additional Minor Changes:

    1. Finishes removing unused AliasLoad code
    2. Unifies the the chain aggregation in the merged stores across
       code paths
    3. Re-add the Store node to the worklist after calling
       SimplifyDemandedBits.
    4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
       arbitrary, but seemed sufficient to not cause regressions in
       tests.

  This finishes the change Matt Arsenault started in r246307 and
  jyknight's original patch.

  Many tests required some changes as memory operations are now
  reorderable. Some tests relying on the order were changed to use
  volatile memory operations

  Noteworthy tests:

    CodeGen/AArch64/argument-blocks.ll -
      It's not entirely clear what the test_varargs_stackalign test is
      supposed to be asserting, but the new code looks right.

    CodeGen/AArch64/arm64-memset-inline.lli -
    CodeGen/AArch64/arm64-stur.ll -
    CodeGen/ARM/memset-inline.ll -
      The backend now generates *worse* code due to store merging
      succeeding, as we do do a 16-byte constant-zero store efficiently.

    CodeGen/AArch64/merge-store.ll -
      Improved, but there still seems to be an extraneous vector insert
      from an element to itself?

    CodeGen/PowerPC/ppc64-align-long-double.ll -
      Worse code emitted in this case, due to the improved store->load
      forwarding.

    CodeGen/X86/dag-merge-fast-accesses.ll -
    CodeGen/X86/MergeConsecutiveStores.ll -
    CodeGen/X86/stores-merging.ll -
    CodeGen/Mips/load-store-left-right.ll -
      Restored correct merging of non-aligned stores

    CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
      Improved. Correctly merges buffer_store_dword calls

    CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
      Improved. Sidesteps loading a stored value and merges two stores

    CodeGen/X86/pr18023.ll -
      This test has been removed, as it was asserting incorrect
      behavior. Non-volatile stores *CAN* be moved past volatile loads,
      and now are.

    CodeGen/X86/vector-idiv.ll -
    CodeGen/X86/vector-lzcnt-128.ll -
      It's basically impossible to tell what these tests are actually
      testing. But, looks like the code got better due to the memory
      operations being recognized as non-aliasing.

    CodeGen/X86/win32-eh.ll -
      Both loads of the securitycookie are now merged.

    CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
      This test appears to work but no longer exhibits the spill
      behavior.

Reviewers: arsenm, hfinkel, tstellarAMD, nhaehnle, jyknight

Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, resistor, tstellarAMD, t.p.northover, spatel

Differential Revision: https://reviews.llvm.org/D14834

llvm-svn: 282600
2016-09-28 15:50:43 +00:00
Simon Pilgrim ab7c46eccf [X86][SSE] Add SSE1 tests to make sure we don't merge loads on illegal types
llvm-svn: 279065
2016-08-18 13:41:26 +00:00
Simon Pilgrim c15d217831 [X86][SSE] Added support for combining target shuffles to (V)PSHUFD/VPERMILPD/VPERMILPS immediate permutes
This patch allows target shuffles to be combined to single input immediate permute instructions - (V)PSHUFD/VPERMILPD/VPERMILPS - allowing more general pattern matching than what we current do and improves the likelihood of memory folding compared to existing patterns which tend to reuse the input in multiple arguments.

Further permute instructions (V)PSHUFLW/(V)PSHUFHW/(V)PERMQ/(V)PERMPD may be added in the future but its proven tricky to create tests cases for them so far. (V)PSHUFLW/(V)PSHUFHW is already handled quite well in combineTargetShuffle so it may be that removing some of that code may allow us to perform more of the combining in one place without duplication.

Differential Revision: http://reviews.llvm.org/D21148

llvm-svn: 273999
2016-06-28 08:08:15 +00:00
Simon Pilgrim c49bd2ede0 [X86][AVX] Ensure EltsFromConsecutiveLoads tests the entire vector for consecutive loads/zeros
Fix for issue introduced D17297, where we were breaking early from the loop detecting consecutive loads which could leave us thinking a consecutive load with zeros was possible.

llvm-svn: 264922
2016-03-30 20:52:24 +00:00
Simon Pilgrim 0110890a79 [X86][SSE] Added tests to ensure that consecutive loads including any/all volatiles are not combined
llvm-svn: 264225
2016-03-24 00:14:37 +00:00
Simon Pilgrim e9093adae0 [X86][AVX] Add shuffle masking support for EltsFromConsecutiveLoads
Add support for the case where we have a consecutive load (which must include the first + last elements) with a mixture of undef/zero elements. We load the vector and then apply a shuffle to clear the zero'd elements.

Differential Revision: http://reviews.llvm.org/D17297

llvm-svn: 261490
2016-02-21 19:15:48 +00:00
Simon Pilgrim 63b1ecab7d line endings fix
llvm-svn: 259992
2016-02-06 15:38:25 +00:00
Simon Pilgrim 9e369f2a51 [X86][SSE] Don't replace an existing 32-bit load with its duplicate
If we are already loading a single 32-bit float/integer then just reuse it.

Fix for regression in D16729

llvm-svn: 259991
2016-02-06 15:37:09 +00:00
Simon Pilgrim 7823fd2535 [X86][SSE] Select domain for 32/64-bit partial loads for EltsFromConsecutiveLoads
Choose between MOVD/MOVSS and MOVQ/MOVSD depending on the target vector type.

This has a lot fewer test changes than trying to add this to X86InstrInfo::setExecutionDomain.....

llvm-svn: 259816
2016-02-04 19:27:51 +00:00
Simon Pilgrim 6788f33cf2 [X86][SSE] Add general 32-bit LOAD + VZEXT_MOVL support to EltsFromConsecutiveLoads
This patch adds support for consecutive (load/undef elements) 32-bit loads, followed by trailing undef/zero elements to be combined to a single MOVD load.

Differential Revision: http://reviews.llvm.org/D16729

llvm-svn: 259796
2016-02-04 16:12:56 +00:00
Simon Pilgrim 528e94e9a2 [X86][SSE] Added i686 target tests to make sure we are correctly loading consecutive entries as 64-bit integers
llvm-svn: 259794
2016-02-04 15:51:55 +00:00
Simon Pilgrim 5be17b6e3e [X86][AVX512] Add support for AVX512 VMOVD (load) shuffle decoding
llvm-svn: 259430
2016-02-01 23:04:05 +00:00
Simon Pilgrim f5c23ad3d7 [X86][AVX512] Add support for AVX512 VMOVSD/VMOVSS shuffle decoding
llvm-svn: 259427
2016-02-01 22:26:28 +00:00
Simon Pilgrim 025a3d857a [X86][AVX512] Add support for AVX512 VINSERTPS shuffle decoding
llvm-svn: 259420
2016-02-01 22:05:50 +00:00
Simon Pilgrim 068e38f7f4 [X86][SSE] Add AVX512 merge consecutive load tests
Add AVX512F/AVX512BW 512-bit tests.

Add AVX512F tests to existing 128/256-bit tests.

llvm-svn: 259410
2016-02-01 21:30:50 +00:00
Simon Pilgrim 46696ef93c [X86][SSE] Add zero element and general 64-bit VZEXT_LOAD support to EltsFromConsecutiveLoads
This patch adds support for trailing zero elements to VZEXT_LOAD loads (and checks that no zero elts occur within the consecutive load).

It also generalizes the 64-bit VZEXT_LOAD load matching to work for loads other than 2x32-bit loads.

After this patch it will also be easier to add support for other basic load patterns like 32-bit VZEXT_LOAD loads, PMOVZX and subvector load insertion.

Differential Revision: http://reviews.llvm.org/D16217

llvm-svn: 258798
2016-01-26 09:30:08 +00:00
Simon Pilgrim e74653b67a [X86][SSE] Add INSERTPS target shuffle combines.
As vector shuffles can only reference two inputs many (V)INSERTPS patterns end up being split over two targets shuffles.

This patch adds combines to attempt to combine (V)INSERTPS nodes with input/output nodes that are just zeroing out these additional vector elements.

Differential Revision: http://reviews.llvm.org/D16072

llvm-svn: 258205
2016-01-19 22:24:12 +00:00
Simon Pilgrim 7cdedc1e02 [X86][SSE] Added extra 'float3' consecutive load tests
llvm-svn: 257998
2016-01-16 19:53:33 +00:00
Simon Pilgrim cff8550121 [X86][SSE] Added more exhaustive merge consecutive load tests
llvm-svn: 257876
2016-01-15 09:52:50 +00:00