This reverts commit 147f45ff24456aea59575fa4ac16c8fa554df46a.
Revert "Revert "Revert "Revert "Replace trivial use of external rc.exe by writing our own .res file.""""
This reverts commit 61a90a67ed54a1f0dfeab457b65abffa129569e4.
The patches were intially reverted because they were causing a failure
on CrWinClangLLD. Unfortunately, this was done haphazardly and didn't
compile, so the revert was reverted again quickly to fix this. One that
was done, the revert of the revert was itself reverted. This allowed me
to finally fix the actual bug in r307452. This patch re-enables the
code path that had originally been causing the bug, now that it (should)
be fixed.
llvm-svn: 307460
Summary:
The original cvtres.exe sets the high bit when an identifier offset
points to a string. Even though this is not mentioned in the spec, and
in fact does not seem to cause errors with most cases, for some reason
this causes a failure in Chromium where the new resource file is not
verified as a new version. This patch sets this high bit flag, and also
adds a test case to check that the output of our library is always
identical to original cvtres.
Reviewers: zturner, ruiu
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D35099
llvm-svn: 307452
1) Don't write a /src/headerblock stream. This appears to be
written conditionally by MSVC, but it's not clear what the
condition is. For now, just remove it since we dont' know
what it is anyway and the particular pdb we've checked in
for the test doesn't have one.
2) Write a valid timestamp for the PDB file signature. This
leads to non-reproducible builds, but it matches the default
behavior of link, so it should be out default as well. If
we need reproducibility, we should add a separate command
line option for it that is off by default.
3) Write an empty FPO stream. MSVC seems to always write an
FPO stream. This change makes the stream directory match
up, although we still need to make the contents of the FPO
stream match.
llvm-svn: 307436
Some platforms require an explicit specialization of std::hash
for PdbRaw_FeaturesSig. Also a test involving case sensitivity
needed to be fixed. For now that particular check just accepts
any path even if they're completely different. Long term we
should output paths in the correct case to match MSVC.
llvm-svn: 307426
Without this we would just append whatever the user
wrote on the command line, so if we're in C:\foo
and we run lld-link bar/baz.obj, we would write
C:\foo\bar/baz.obj in various places in the PDB.
MSVC linker does not do this, so we shouldn't either.
This fixes some differences in the diff test, so we
update the test as well.
Differential Revision: https://reviews.llvm.org/D35092
llvm-svn: 307423
A couple of things were different about our generated PDBs.
1) We were outputting the wrong Version on the PDB Stream.
The version we were setting was newer than what MSVC is setting.
It's not clear what the implications are, but we change LLD
to use PdbImplVC70, as MSVC does.
2) For the optional debug stream indices in the DBI Stream, we
were outputting 0 to mean "the stream is not present". MSVC
outputs uint16_t(-1), which is the "correct" way to specify
that a stream is not present. So we fix that as well.
3) We were setting the PDB Stream signature to 0. This is supposed
to be the result of calling time(nullptr). Although this leads
to non-deterministic builds, a better way to solve that is by
having a command line option explicitly for generating a
reproducible build, and have the default behavior of lld-link
match the default behavior of link.
To test this, I'm making use of the new and improved `pdb diff`
sub command. To make it suitable for writing tests against, I had
to modify the diff subcommand slightly to print less verbose output.
Previously it would always print | <column> | <value1> | <value2> |
which is quite verbose, and the values are fragile. All we really
want to know is "did we produce the same value as link?" So I added
command line options to print a single character representing the
result status (different, identical, equivalent), and another to
hide the value display. Note that just inspecting the diff output
used to write the test, you can see some things that are obviously
wrong. That is just reflective of the fact that this is the state
of affairs today, not that we're asserting that this is "correct".
We can use this as a starting point to discover differences, fix
them, and update the test.
Differential Revision: https://reviews.llvm.org/D35086
llvm-svn: 307422
In preparation for the addition of rangeThunks() calculate the addresses
of all the inputSections so that ThunkSections can be inserted at the right
place.
Differential Revision: https://reviews.llvm.org/D34688
llvm-svn: 307373
This is relative to PR33173,
Previously if something wrong happened on DWARF parsers side during parsing
object for building gdb index (like was in PR: unsupported relocation)
then LLD continued and finished the link. DWARF parsers sure showed error
message on their side, but that is all.
Patch changes behavior to fail the link in this case and show more
detailed message.
Differential revision: https://reviews.llvm.org/D34814
llvm-svn: 307370
The assignAddresses() function accumulates state in the LinkerScript that
prevents it from being called multiple times. This change moves the state
into a separate structure AddressState that is created at the start of the
function and disposed of at the end.
CurAddressState is used rather than passing a reference to the state as a
parameter to the functions used by assignAddresses(). This is because the
getSymbolValue function needs to be executed in the context of AddressState
but it is stored in ScriptParser when AddressState is not available.
The AddressState is also used in a limited context by processCommands()
Differential Revision: https://reviews.llvm.org/D34345
llvm-svn: 307367
This fixes last testcase provided in PR28414.
In short issue is next: when we had X@@Version symbol in object A,
we did not resolve it to X early. Then when in another object B
we had reference to undefined X, symbol X from archive was fetched.
Since both archive and object A contains another symbol Z, duplicate
symbol definition was triggered as a result.
Correct behavior is to use X@@Version from object A instead and do not fetch
any symbols from archive.
Differential revision: https://reviews.llvm.org/D35059
llvm-svn: 307364
Based strictly on the name, this seems to have something to do
width edit & continue. The goal of this patch has nothing to do
with supporting edit and continue though. msvc link.exe writes
very basic information into this area even when *not* compiling
with support for E&C, and so the goal here is to bring lld-link
to parity. Since we cannot know what assumptions standard tools
make about the content of PDB files, we need to be as close as
possible.
This ECNames data structure is a standard PDB string hash table.
link.exe puts a single string into this hash table, which is the
full path to the PDB file on disk. It then references this string
from the module descriptor for the compiler generated `* Linker *`
module.
With this patch, lld-link will generate the exact same sequence of
bytes as MSVC link for this subsection for a given object file
input (as reported by `llvm-pdbutil bytes -ec`).
llvm-svn: 307356
Summary:
The capture() function was removed in r306625. This should fix PGO breakages
reported by Michael Zolotukhin.
Reviewers: mzolotukhin
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D35088
llvm-svn: 307320
Summary:
There are a variety of records that open scopes: function scopes, block
scopes, and inlined call site scopes. These symbol records contain
Parent and End fields with the offsets of other symbol records. The End
field contains the offset of the matching S_END or S_INLINESITE_END
record. The Parent field contains the offset of the parent record, or 0
if this is a top-level scope (i.e. a function).
With this change, `llvm-pdbutil pretty -all` no longer crashes on PDBs
produced by LLD. I haven't tried a real debugger yet.
Reviewers: zturner, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34898
llvm-svn: 307278
This reverts commit ae21ee0b6cacbc1efaf4d42502e71da2f0eb45c3.
The initial revert was done in order to prevent ongoing errors on
chromium bots such as CrWinClangLLD. However, this was done haphazardly
and I didn't realize there were test and compilation failures, so this
revert was reverted. Now that those have been fixed, we can revert the
revert of the revert.
llvm-svn: 307227
This reverts commit 5fecbbbe5049665d86834cf69d8f75db4f392308.
The initial revert was done in order to prevent ongoing errors on
chromium bots such as CrWinClangLLD. However, this was done haphazardly
and I didn't realize there were test and compilation failures, so this
revert was reverted. Now that those have been fixed, we can revert the
revert of the revert.
llvm-svn: 307226
This reverts commit 600d52c278e123dd08bee24c1f00932b55add8de.
This patch still seems to break CrWinClangLLD, reverting until I can
find root problem.
llvm-svn: 307189
This patch still seems to break CrWinClangLLD, reverting this once more
until I can discover root problem.
This reverts commit 3dbbc8ce43be50ffde2b1c655c6d3a25796fe78b.
llvm-svn: 307188
This change permits there to be more than one thunk to be associated with
a symbol. For interworking thunks we only require one thunk, but range
extension thunks may require more than one.
Differential Revision: https://reviews.llvm.org/D34037
llvm-svn: 307136
On ARM the interworking thunks are only produced for branch instructions
that can't be changed into a blx instruction so only Thumb callers would
call Thumb thunks and only ARM callers would call ARM thunks. With range
extension thunks branch and link instructions may need a Thunk. These
instructions can be rewritten as a blx and can use either ARM or Thumb
thunks.
We introduce an isCompatibleWith() function so that a caller can check if
an existing Thunk is compatible before reusing it.
Differential Revision: https://reviews.llvm.org/D34035
llvm-svn: 307132
The allocateHeaders() function is called at the end of assignAddresses(), it
decides whether the ELF header and program header table can be allocated to
a PT_LOAD program header. As the function alters state, it prevents
assignAddresses() from being called multiple times.
This change splits out the call to allocateHeaders() from assignAddresses()
this will permit assignAddresses() to be called while processing range
extension thunks without trying to allocateHeaders().
Differential Revision: https://reviews.llvm.org/D34344
llvm-svn: 307131
This is finally getting to the point where output sections are
constructed.
createOrphanCommands and fabricateDefaultCommands are moved out so
they can be merged with existing code in followup commits.
llvm-svn: 307107
Summary:
If the output file is a character file (e.g. /dev/null) unlinking it could
potentially destabilize the user's system. For example,
unlinking causes `lld %input -o /dev/null` to replace /dev/null with a
regular file, which will lead to unexpected behavior in other programs
that read from /dev/null, and worse than expected peformance for
programs that write to /dev/null.
This makes it possible to run the test-release.sh script as root.
Prior to this patch, the ELF/basic.s test would replace
/dev/null with a regular file, which would cause crashes in llvm
test-suite programs that piped /dev/null to stdin.
For example, if you run the test-relase.sh script as root,
Reviewers: ruiu
Reviewed By: ruiu
Subscribers: emaste, llvm-commits
Differential Revision: https://reviews.llvm.org/D34917
llvm-svn: 307092
This is PR28414.
Previously LLD was unable to link following:
(failed with undefined symbol bar)
Version script:
SOME_VERSION { global: *; };
.global _start
.global bar
.symver _start, bar@@SOME_VERSION
_start:
jmp bar
Manual has next description:
.symver name, name2@@nodename
In this case, the symbol name must exist and be defined within the file being assembled. It is similar to name2@nodename.
The difference is name2@@nodename will also be used to resolve references to name2 by the linker
https://sourceware.org/binutils/docs/as/Symver.html
Patch implements that. If we have name@@ver symbol and name is undefined, name@@ver is used to resolve references to name.
If name is defined then multiple definition error is emited, that is consistent with what bfd do.
Differential revision: https://reviews.llvm.org/D33680
llvm-svn: 307077
Eric Beckmann