on our internal nightly testers. So, basically revert r152486 again.
Abbreviated original commit message:
Implement a more intelligent way of spilling uses across an invoke boundary.
It looks as if Chander's inlining work, r152737, exposed an issue.
llvm-svn: 152887
There were cases where a value could be used and it's both crossing an invoke
and NOT crossing an invoke. This could happen in the landing pads. In that case,
we will demote the value to the stack like we did before.
<rdar://problem/10609139>
llvm-svn: 152705
The old way of determine when and where to spill a value that was used inside of
a landing pad resulted in spilling that value everywhere and not just at the
invoke edge.
This algorithm determines which values are used within a landing pad. It then
spills those values before the invoke and reloads them before the uses. This
should prevent excessive spilling in many cases, e.g. inside of loops.
<rdar://problem/10609139>
llvm-svn: 152486
GEP instructions are there for the compiler and shouldn't really output much
code (if any at all). When a GEP is stored in the entry block, Fast ISel (for
one) will not know that it could fold it into further uses. For instance, inside
of the EH handling code. This results in a lot of unnecessary spills and loads
which bloat code and slows down pretty much everything.
<rdar://problem/10694814>
llvm-svn: 149114
Fast ISel isn't able to handle 'insertvalue' and it causes a large slowdown
during -O0 compilation. We don't necessarily need to generate an aggregate of
the values here if they're just going to be extracted directly afterwards.
<rdar://problem/10530851>
llvm-svn: 146481
There may be many invokes that share one landing pad, and the previous code
would record the landing pad once for each invoke. Besides the wasted
effort, a pair of volatile loads gets inserted every time the landing pad is
processed. The rest of the code can get optimized away when a landing pad
is processed repeatedly, but the volatile loads remain, resulting in code like:
LBB35_18:
Ltmp483:
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r4, [r7, #-72]
ldr r2, [r7, #-68]
llvm-svn: 144787
This same basic code was in the older version of the SjLj exception handling,
but it was removed in the recent revisions to that code. It needs to be there.
llvm-svn: 144782
The assumption in the back-end is that PHIs are not allowed at the start of the
landing pad block for SjLj exceptions.
<rdar://problem/10313708>
llvm-svn: 142689
Use the custom inserter for the ARM setjmp intrinsics. Instead of creating the
SjLj dispatch table in IR, where it frequently violates serveral assumptions --
in particular assumptions made by the landingpad instruction about what can
branch to a landing pad and what cannot. Performing this in the back-end allows
us to violate these assumptions without the IR getting angry at us.
It also allows us to perform a small optimization. We can shove the address of
the dispatch's basic block into the function context and not have to add code
around the setjmp to check for the return value and jump to the dispatch.
Neat, huh?
<rdar://problem/10116753>
llvm-svn: 142294
Upon further review, most of the EH code should remain written at the IR
level. The part which breaks SSA form is the dispatch table, so that part will
be moved to the back-end.
llvm-svn: 140730
This intrinsic is used to pass the index of the function context to the back-end
for further processing. The back-end is in charge of filling in the rest of the
entries.
llvm-svn: 140676
The DWARF exception pass uses the call site information, which is set up here. A
pre-RA pass is too late for it to use this information. So create and setup the
function context here, and then insert the call site values here (and map the
call sites for the DWARF EH pass). This is simpler than the original pass, and
doesn't make the CFG lose its SSA-ness.
It's a win-win-win-win-lose-win-win situation.
llvm-svn: 140675
Splitting a landing pad takes considerable care because of PHIs and other
nasties. The problem is that the jump table needs to jump to the landing pad
block. However, the landing pad block can be jumped to only by an invoke
instruction. So we clone the landingpad instruction into its own basic block,
have the invoke jump to there. The landingpad instruction's basic block's
successor is now the target for the jump table.
But because of PHI nodes, we need to create another basic block for the jump
table to jump to. This is definitely a hack, because the values for the PHI
nodes may not be defined on the edge from the jump table. But that's okay,
because the jump table is simply a construct to mimic what is happening in the
CFG. So the values are mysteriously there, even though there is no value for the
PHI from the jump table's edge (hence calling this a hack).
llvm-svn: 139545
A value of -1 at a call site tells the personality function that this call isn't
handled by the current function. Since the ResumeInsts are converted to calls to
_Unwind_SjLj_Resume, add a (volatile) store of -1 to its 'call site'.
llvm-svn: 138416
This is not necessarily the first or dominating use of the EH values. The IR
breaks if it's not. So replace the specific value in the instruction with the
new value.
llvm-svn: 138406
The invoke could be at the end of the entry block. If it's the only one, then we
won't process all of the landingpad instructions correctly. This code is
currently ugly, but should be made much nicer once the new EH switch is thrown.
llvm-svn: 138397
value, we insert a load of the exception object and selector object from memory,
which is where it actually resides. If it's used by a PHI node, we follow that
to where it is being used. Eventually, all landingpad instructions should have
no uses. Any PHI nodes that were associated with those landingpads should be
removed.
llvm-svn: 138302
an assert on Darwin llvm-gcc builds.
Assertion failed: (castIsValid(op, S, Ty) && "Invalid cast!"), function Create, file /Users/buildslave/zorg/buildbot/smooshlab/slave-0.8/build.llvm-gcc-i386-darwin9-RA/llvm.src/lib/VMCore/Instructions.cpp, li\
ne 2067.
etc.
http://smooshlab.apple.com:8013/builders/llvm-gcc-i386-darwin9-RA/builds/2354
--- Reverse-merging r134893 into '.':
U include/llvm/Target/TargetData.h
U include/llvm/DerivedTypes.h
U tools/bugpoint/ExtractFunction.cpp
U unittests/Support/TypeBuilderTest.cpp
U lib/Target/ARM/ARMGlobalMerge.cpp
U lib/Target/TargetData.cpp
U lib/VMCore/Constants.cpp
U lib/VMCore/Type.cpp
U lib/VMCore/Core.cpp
U lib/Transforms/Utils/CodeExtractor.cpp
U lib/Transforms/Instrumentation/ProfilingUtils.cpp
U lib/Transforms/IPO/DeadArgumentElimination.cpp
U lib/CodeGen/SjLjEHPrepare.cpp
--- Reverse-merging r134888 into '.':
G include/llvm/DerivedTypes.h
U include/llvm/Support/TypeBuilder.h
U include/llvm/Intrinsics.h
U unittests/Analysis/ScalarEvolutionTest.cpp
U unittests/ExecutionEngine/JIT/JITTest.cpp
U unittests/ExecutionEngine/JIT/JITMemoryManagerTest.cpp
U unittests/VMCore/PassManagerTest.cpp
G unittests/Support/TypeBuilderTest.cpp
U lib/Target/MBlaze/MBlazeIntrinsicInfo.cpp
U lib/Target/Blackfin/BlackfinIntrinsicInfo.cpp
U lib/VMCore/IRBuilder.cpp
G lib/VMCore/Type.cpp
U lib/VMCore/Function.cpp
G lib/VMCore/Core.cpp
U lib/VMCore/Module.cpp
U lib/AsmParser/LLParser.cpp
U lib/Transforms/Utils/CloneFunction.cpp
G lib/Transforms/Utils/CodeExtractor.cpp
U lib/Transforms/Utils/InlineFunction.cpp
U lib/Transforms/Instrumentation/GCOVProfiling.cpp
U lib/Transforms/Scalar/ObjCARC.cpp
U lib/Transforms/Scalar/SimplifyLibCalls.cpp
U lib/Transforms/Scalar/MemCpyOptimizer.cpp
G lib/Transforms/IPO/DeadArgumentElimination.cpp
U lib/Transforms/IPO/ArgumentPromotion.cpp
U lib/Transforms/InstCombine/InstCombineCompares.cpp
U lib/Transforms/InstCombine/InstCombineAndOrXor.cpp
U lib/Transforms/InstCombine/InstCombineCalls.cpp
U lib/CodeGen/DwarfEHPrepare.cpp
U lib/CodeGen/IntrinsicLowering.cpp
U lib/Bitcode/Reader/BitcodeReader.cpp
llvm-svn: 134949
intrinsic call. This prevents it from being reordered so that it appears
*before* the setjmp intrinsic (thus making it completely useless).
<rdar://problem/9409683>
llvm-svn: 131174
the 'unwind' instruction. However, later on that instruction was converted into
a jump to the basic block it was located in, causing an infinite loop when we
get there.
It turns out, we get there if the _Unwind_Resume_or_Rethrow call returns (which
it's not supposed to do). It returns if it cannot find a place to unwind
to. Thus we would get what appears to be a "hang" when in reality it's just that
the EH couldn't be propagated further along.
Instead of infinitely looping (or calling `unwind', which none of our back-ends
support (it's lowered into nothing...)), call the @llvm.trap() intrinsic
instead. This may not conform to specific rules of a particular language, but
it's rather better than infinitely looping.
<rdar://problem/9175843&9233582>
llvm-svn: 129302
It needed to be moved closer to the setjmp statement, because the code directly
after the setjmp needs to know about values that are on the stack. Also, the
'bitcast' of the function context was causing a dead load. This wouldn't be too
horrible, except that at -O0 it wasn't optimized out, and because it wasn't
using the correct base pointer (if there is a VLA), it would try to access a
value from a garbage address.
<rdar://problem/9130540>
llvm-svn: 128873
Chad Rosier