This patch adds statistics about the contribution of each object file to
the linked debug info. When --statistics is passed to dsymutil, it
prints a table after linking as illustrated below.
It lists the object file name, the size of the debug info in the object
file in bytes, and the absolute size contribution to the linked dSYM and
the percentage difference. The table is sorted by the output size, so
the object files contributing the most to the link are listed first.
.debug_info section size (in bytes)
-------------------------------------------------------------------------------
Filename Object dSYM Change
-------------------------------------------------------------------------------
basic2.macho.x86_64.o 210b 165b -24.00%
basic3.macho.x86_64.o 177b 150b -16.51%
basic1.macho.x86_64.o 125b 129b 3.15%
-------------------------------------------------------------------------------
Total 512b 444b -14.23%
-------------------------------------------------------------------------------
Differential revision: https://reviews.llvm.org/D79513
f8990feb12 enabled installing PIC version of both libclang.a and
libclang.so when LIBCLANG_BUILD_STATIC is ON. But it broke the no-PIC
build when LLVM_ENABLE_PIC=OFF with the following error:
```
CMake Error at
/b/s/w/ir/cache/builder/src/third_party/llvm/clang/tools/libclang/CMakeLists.txt:123
(target_compile_definitions):
target_compile_definitions called with non-compilable target type
```
This is because as the code loops through ${name} and ${name}_static, it
introduced a side effect, which is adding an empty libclang_static to
targets. Later target_compile_definitions is called on libclang_static.
That function requires that target must have been created by a command
such as add_executable() or add_library(), so it crashed.
The solution is to not naively loop through both libclang and
libclang_static, but only the ones that are actually added by
llvm_add_library(). Here's the library build type to library target name
mapping:
| SHARED only | libclang |
| STATIC only | libclang |
| SHARED and STATIC | libclang and libclang_static |
So only when SHARED and STATIC are both set should we loop through two
targets. Explicitly parse the STATIC argument and set the list
accordingly.
Reviewed By: smeenai
Differential Revision: https://reviews.llvm.org/D79059
When reporting diagnostics from ASan's (and other sanitizer's) signal
handlers we should strip the "invalid signature" bit before printing
addresses. This makes the report less confusing and let's the user
focus on the real issue.
rdar://62615826
Reviewed By: kubamracek, delcypher
Differential Revision: https://reviews.llvm.org/D79132
Now using patterns, since there's a single-instruction lowering. (We
could convert to VSELECT and pattern-match that, but there doesn't seem
to be much point.)
I think this might be the first instruction to use nested multiclasses
this way? It seems like a good way to reduce duplication between
different integer widths. Let me know if it seems like an improvement.
Also, while I'm here, fix the return type of SETCC so we don't try to
merge a sign-extend with a SETCC.
Differential Revision: https://reviews.llvm.org/D79193
For Swift LLDB (but potentially also for module support in Clang-land)
we need a way to accumulate the path remappings produced by
Module::RegisterXcodeSDK(). In order to make this work for
SymbolFileDebugMaps, registering the search path remapping with both
modules is necessary.
Differential Revision: https://reviews.llvm.org/D79384
<rdar://problem/62750529>
Summary:
Add --relative to the suggested git-diff one liner. If the user does not
pass this argument, then git will produce a diff with the path relative
to the repository root. If the user's working directory is not the
repository root, then clang-format will complain that the file is not
found. The --relative argument makes git produce a diff with the files
relative to the working directory.
Add note to doc string to warn users about the fact that filenames
embedded in the diff are used as-is with no attempts to "do what they
mean, not what they say"
Reviewers: djasper, alexfh, efriedma, klimek, thakis
Reviewed By: efriedma
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D79054
Summary: I updated the code that produces the message and the associated test.
Reviewers: sscalpone, DavidTruby, kiranchandramohan
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79514
Neither gcc or icc support this. Split out from D79472. I want
to remove more, but it looks like icc does support some things
gcc doesn't and I need to double check our internal test suites.
The Python used to run lit can be different from the Python LLDB was
build with. One scenario where this happens is when LLVM can find the
Python 3 interpreter, but not the Python 3 libraries, in which case LLDB
build and links against Python 3. Without this change, you end up with
an ModuleNotFoundError because of the mismatch.
Instead of looking at the Python interpreter that's used to run lit,
lldbtest should use the interpreter that matches the Python version LLDB
was build against.
Differential revision: https://reviews.llvm.org/D79519
loop nest.
Summary: As discussed in https://reviews.llvm.org/D73129.
Example
Before unroll and jam:
for
A
for
B
for
C
D
E
After unroll and jam (currently):
for
A
A'
for
B
for
C
D
B'
for
C'
D'
E
E'
After unroll and jam (Ideal):
for
A
A'
for
B
B'
for
C
C'
D
D'
E
E'
This is the first patch to change unroll and jam to work in the ideal
way.
This patch change the safety checks needed to make sure is safe to
unroll and jam in the ideal way.
Reviewer: dmgreen, jdoerfert, Meinersbur, kbarton, bmahjour, etiotto
Reviewed By: Meinersbur
Subscribers: fhahn, hiraditya, zzheng, llvm-commits, anhtuyen, prithayan
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D76132
Y is the start of several 2 letter constraints, but we also had
partial support to recognize it by itself. But it doesn't look
like it can get through clang as a single letter so the backend
support for this was effectively dead.
A few documentation clarifications and moving one part of the
docs around to be closer to the first mention of display so that
it's easier to spot based on some user feedback.
Differential Revision: https://reviews.llvm.org/D79443
When debugging a remote platform, the platform you get from
GetPlatformForArchitecture doesn't inherit from PlatformDarwin.
HostInfoMacOSX seems like the right place to have a global store of
local paths.
Differential Revision: https://reviews.llvm.org/D79364
When debugging from a SymbolMap the creation of CompileUnits for the
individual object files is so lazy that RegisterXcodeSDK() is not
invoked at all before the Swift TypeSystem wants to read it. This
patch fixes this by introducing an explicit
SymbolFile::ParseXcodeSDK() call that can be invoked deterministically
before the result is required.
<rdar://problem/62532151+62326862>
https://reviews.llvm.org/D79273
passed to __builtin_os_log_format to extend its lifetime to the end of
its enclosing block
Extend only lifetimes of pointers returned by function calls or message
sends instead. In the long term, we should lifetime-extend pointers in
more complex expressions and non-ARC objects (e.g., C++ temporaries)
too.
rdar://problem/61846261
Summary: I updated the code that produces the message and the associated test.
Reviewers: sscalpone, DavidTruby
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79514
Before this patch, the debug record S_GTHREAD32 which represents global thread_local symbols, was emitted by LLD into the respective module stream. This makes Visual Studio unable to display thread_local symbols in the debugger.
After this patch, S_GTHREAD32 is moved into the globals stream. This matches MSVC behavior.
Differential Revision: https://reviews.llvm.org/D79005
Add a way to get mutable equivalence sets to Scope so that they can
have sizes and offsets assigned to them.
Change CommonBlockDetails to have mutable symbols so that they can have
sizes and offets assigned to them. This also allows the removal of some
`const_cast`s.
Add MutableSymbolRef and MutableSymbolVector as mutable analogs to
SymbolRef and SymbolVector. Replace uses of equivalent types with those
names.
Differential Revision: https://reviews.llvm.org/D79346
When using vec_load/store_len_r with an immediate length operand
of 16 or larger, LLVM will currently emit an VLRL/VSTRL instruction
with that immediate. This creates a valid encoding (which should be
supported by the assembler), but always traps at runtime. This patch
fixes this by not creating VLRL/VSTRL in those cases.
This would result in loading the length into a register and
calling VLRLR/VSTRLR instead. However, these operations with
a length of 15 or larger are in fact simply equivalent to a
full vector load or store. And in fact the same holds true for
vec_load/store_len as well.
Therefore, add a DAGCombine rule to replace those operations with
plain vector loads or stores if the length is known at compile
time and equal or larger to 15.
Summary: systemd recently added a clang-format file. One issue I
encountered in using clang-format on systemd is that systemd does
not add a space before the parens of their foreach macros but
clang-format always adds a space. This does not seem to be
configurable in clang-format. This revision adds the
ControlStatementsExceptForEachMacros option to SpaceBeforeParens
which puts a space before all control statement parens except
ForEach macros. This drastically reduces the amount of changes
when running clang-format on systemd's source code.
Reviewers: MyDeveloperDay, krasimir, mitchell-stellar
Reviewed By: MyDeveloperDay
Subscribers: cfe-commits
Tags: #clang-format, #clang
Differential Revision: https://reviews.llvm.org/D78869
Calling getShiftAmountTy with LegalTypes set may return a type that's too narrow to hold the shift amount for integer type it's applied to.
Fixes the regression introduced by D79096
Differential Revision: https://reviews.llvm.org/D79405
Objects in common blocks have offsets relative to the start of the
common block, independent of the enclosing scope, so they are processed
first. Add alignment to CommonBlockDetails to record the required
alignment of the common block.
For equivalence sets, each object depends on the one that is forced to
occur first in memory. The rest are recorded in the dependents_ map and
have offsets assigned after the other symbols are done.
Differential Revision: https://reviews.llvm.org/D79347
When the folding is performed in place, the `::fold` function does not populate
its `results` argument to indicate that. (In the folding hook for single-result
operations, the result of the original operation is expected to be returned,
but it is then ignored by the wrapper.) `OperationFolder::create` would
erronously rely on the _operation_ having zero results instead of on the
_folding_ producing zero new results to populate the list of results with those
of the original operation. This would lead to a crash for single-result ops
with in-place folds where the first result is accessed uncondtionally because
the list of results was not properly populated. Use the list of values produced
by the folding instead.
Differential Revision: https://reviews.llvm.org/D79497
Summary:
If the only use of a value is a start or end lifetime intrinsic then mark the intrinsic as trivially dead. This should allow for that value to then be removed as well.
Currently, this only works for allocas, globals, and arguments.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79355
Summary:
Math results are compared with MPFR results by checking if they are
within a tolerance level of the MPFR result. The tolerance level is set
using additional bits of precision of the fractional part of a floating
point value. Hence, the actual value of the tolerance depends on not
only the additional bits, but also on the exponent part of the floating
point number.
Previously, the exponent part was not considered in evaluating the
tolerance value. While it was OK for small values less than 1 (hence
sinf, cosf, sincosf tests were OK), it breaks for large values which
functions like exp and friends produce. This change uses the exponent
value also to evaluate the tolerance value. LLVM libc produced results
can now be compared with MPFR produced results for large values also.
Reviewers: abrachet
Differential Revision: https://reviews.llvm.org/D79278
This helped fix some i686 vXi64 broadcast folds that were becoming v2Xi32 broadcasts because we didn't match the broadcast until after SimplifyDemandedBits worked out we only used the bottom 32-bits in PMUL(U)DQ and type legalization had split the original i64 load.
A couple of regressions occurred which required some fixups - adding concat_vectors(broadcast_load,broadcast_load) splat support and recognising (unnecessary) unary shuffles of already broadcasted vectors.
This came about as part of the work investigating vector load combining from shuffles for PR42550.
Summary:
Any function in this module that make use of DemandedElts laregely does
not work with scalable vectors. DemandedElts is used to define which
elements of the vector to look at. At best, for scalable vectors, we can
express the first N elements of the vector. However, in practice, most
code that uses these functions expect to be able to talk about the
entire vector. In principle, this module should be able to be extended
to work with scalable vectors. However, before we can do that, we should
ensure that it does not cause code with scalable vectors to miscompile.
All functions that use a DemandedElts will bail out if the vector is
scalable. Usages of getNumElements() are updated to go through
FixedVectorType pointers.
Reviewers: rengolin, efriedma, sdesmalen, c-rhodes, spatel
Reviewed By: efriedma
Subscribers: david-arm, tschuett, kristof.beyls, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79053
When running on remote hosts, we need the whole `echo 123 | %t.exe` command
to run on the remote host. Thus, we need to escape the pipe to make sure
the command is treated as `{ echo 123 | %t.exe } > %t.out` instead of
`{ echo 123 } | %t.exe > %t.out`m where only `echo 123` is run on the
remote host.
Running `export` when there is no environment variable to export will
cause the environment on the remote host to be printed. We don't want
that, so don't run any `export` command on the host when there's no env.
We do not want to break asm syntax. These suffixes are
quite useful for debugging, so add an option to print
them. Right now it is NFC.
Differential Revision: https://reviews.llvm.org/D79435
Craig Topper