When we translate a no-op (same type) bitcast, we try to be clever and
only emit a COPY if we already assigned a vreg to the defined value.
However, when we didn't, we tried to assign to a reference into the
ValToVReg DenseMap, even though the RHS of the assignment
(getOrCreateVReg) could potentially grow that DenseMap, invalidating the
reference.
Avoid that by getting the source vreg first.
I audited the rest of the translator; this is the only tricky case.
The test is quite unwieldy, as the problem is caused by the DenseMap
growing, which happens after the 47th mapped value.
llvm-svn: 297208
For vector operands, the `select` instruction supports both vector and
non-vector conditions. The MIR builder had an overly restrictive
assertion, that only accepted vector conditions for vector selects
(in effect implementing ISD::VSELECT).
Make it possible to express the full range of G_SELECTs.
llvm-svn: 297207
When computing the mapping for non-generic instructions, we skipped
%noreg operands, because we can't always reason about their banks.
Also skip them when applying the mapping. Otherwise, we could end
up with mappings that we can't apply.
While there, duplicate an assert to distinguish between the two
error conditions.
llvm-svn: 297201
When a dbg_value has a constant operand that isn't representable in MI,
there isn't much we can do. Use %noreg (0) for those situations.
This matches the SelectionDAG behavior.
llvm-svn: 297200
We cannot leave the identity copies 'select true, arg, undef' that this pass
inserts for arguments to simplify handling of values on swifterror arguments.
swifterror arguments have restrictions on their uses.
rdar://30839288
llvm-svn: 297197
Only when load-hoisted we can be sure the base pointer is invariant
during the SCoP's execution. Most of the time it would be added to
the required hoists for the alias checks anyway, except with
-polly-ignore-aliasing, -polly-use-runtime-alias-checks=0 or if
AliasAnalysis is already sure it doesn't alias with anything
(for instance if there is no other pointer to alias with).
Two more parts in Polly assume that this load-hoisting took place:
- setNewAccessRelation() which contains an assert which tests this.
- BlockGenerator which would use to the base ptr from the original
code if not load-hoisted (if the access expression is regenerated)
Differential Revision: https://reviews.llvm.org/D30694
llvm-svn: 297195
Summary:
This is a revised version of D28796. Included test is changed to
resolve the target compatibility issue reported (rL293032).
Reviewers: inglorion, dblaikie, echristo, aprantl, probinson
Reviewed By: inglorion
Subscribers: mehdi_amini, cfe-commits
Differential Revision: https://reviews.llvm.org/D30663
llvm-svn: 297194
Move the __try/__except block outside of the set_thread_name function to avoid a conflict with object unwinding due to the use of the llvm::Storage.
Differential Revision: https://reviews.llvm.org/D30707
llvm-svn: 297192
If /msvclto is specified, we compile bitcode files and pass it to the
MSVC linker, stripping all bitcode files. We haven't stripped archive
files, because I was thinking that the MSVC linker wouldn't touch files
in archive files. When we pass an object file to link.exe, all symbols
have been resolved already, so link.exe shoulnd't need any of the files
in archives.
It turns out that even though link.exe doesn't need to do that, it
seems to try to read each file in all archives. And if there's a non-
COFF file in an archive, it exists with an error message. So we need
to remove archives from the command line too.
llvm-svn: 297191
Broadcom Vulcan is now Cavium ThunderX2T99.
LLVM Bugzilla: http://bugs.llvm.org/show_bug.cgi?id=32113
Minor fixes for the alignments of loops and functions for
ThunderX T81/T83/T88 (better performance).
Patch was tested with SpecCPU2006.
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D30510
llvm-svn: 297190
This test broke with an LLVM instcombine patch (r297166).
I changed the RUN line to only run -mem2reg (to save time checking this large chunk of tests)
and updated the checks using the script attached to D17999:
https://reviews.llvm.org/D17999
The goal is to make this test immune to optimizer changes. If there's something in these
tests that was checking for an IR optimization, that should be tested in LLVM, not Clang.
llvm-svn: 297189
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
Include projects/openmp into the build using add_llvm_external_project
instead of add_subdirectory. This creates an option
LLVM_TOOL_OPENMP_BUILD that selects whether this project gets included
in an in-tree build.
Reviewers: beanz, AndreyChurbanov, jlpeyton
Subscribers: srhines, openmp-commits, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30470
llvm-svn: 297185
Temporarily mark the test as unsupported so the powerpc le buildbot
testers can get back to work.
There was a brief discussion of this on the mailing list for r296998.
llvm-svn: 297184
Summary:
For our set/map types, count/find normally take const references.
This works well for non-pointer types, but can suck for pointer
types.
DenseSet<int *> foo;
const int *b = nullptr;
foo.count(b) does not work
but the equivalent reference version does work
(patch to fix DenseSet/DenseMap coming up)
For SmallPtrSet, you have no such option.
The following will not work right now:
SmallPtrSet<int *> foo;
const int *b = nullptr;
foo.count(b);
This makes const correctness hard in some cases.
Example:
SmallPtrSet<Instruction *> InstructionsToErase;
You can't make this SmallPtrSet<const Instruction *> because then you
can't erase the instruction. If I want to see if something is in the
set, I may only have a const Instruction *. Given that count and find
are non-mutating, this should just work.
The places in our code base that do this resort to const_cast :(.
This patch makes count and find able to be used with const Instruction
* in the above SmallPtrSet examples.
This is a bit annoying because of where C++ applies the const, so we
have to remove the pointer type from the passed-in-type and rebuild it
with const.
Reviewers: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30608
llvm-svn: 297180
When expanding the set of uniform instructions beyond the seed instructions
(e.g., consecutive pointers), we mark a new instruction uniform if all its
loop-varying users are uniform. We should also allow users that are consecutive
or interleaved memory accesses. This fixes cases where we have an instruction
that is used as the pointer operand of a consecutive access but also used by a
non-memory instruction that later becomes uniform as part of the expansion.
llvm-svn: 297179
Summary:
Loop alignment can cause a significant change of
the perfromance for short loops.
To be able to evaluate the impact of loop alignment this change
introduces the new option x86-experimental-pref-loop-alignment.
The alignment will be 2^Value bytes, the default value is 4.
Patch by Serguei Katkov!
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D30391
llvm-svn: 297178
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
Other source files in the source tree tend to include this header file
unconditionally. It also parses perfectly fine on ARM EHABI systems.
llvm-svn: 297175
All of the access to __exidx_*, dl_iterate_phdr(), etc. is specific to
the findUnwindSections() function. Right now all of the includes and
declarations related to them are scattered throughout the source file.
For example, for <link.h>, we have a full list of operating systems
guarding the #include, even though the code that uses dl_iterate_phdr()
miraculously doesn't use the same list.
Change the code so that findUnwindSections() is preceded by a block of
#ifdefs that share the same structure as the function itself. First
comes all of the macOS specific bits, followed by bare-metal ARM,
followed by ELF EHABI + DWARF.
This actually allows us to build a copy of libunwind without any
specific ifdefs for NetBSD, CloudABI, etc. It likely also unbreaks the
build of libunwind on FreeBSD/armv6, though I can't confirm.
Reviewed by: compnerd
Differential Revision: https://reviews.llvm.org/D30696
llvm-svn: 297174
Summary:
This test was missing the target triple.
Once I fixed that, the case with the invalid character error stopped
returning 1 from llvm-lto2 and the test reported a failure. Fixed by
adding the missing return from llvm-lto2. Apparently we were failing
when we eventually tried to get the target.
Reviewers: pcc
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30585
llvm-svn: 297173
This reverts commit r296488.
As noted by David Blaikie on llvm-commits, I overlooked the case of a
debug function being inlined into a nodebug function being inlined
into a debug function.
llvm-svn: 297163
There is no point in optimizing unreachable code, hence our test cases should
always return.
This commit is part of a series that makes Polly more robust on the presence of
unreachables.
llvm-svn: 297158
These test cases should work in combination with
https://reviews.llvm.org/D12676, but became outdated over time. Update them
in preparation of discussions with Daniel Berlin on how to represent unreachable
in the post-dominator tree.
llvm-svn: 297157
Our current scop modeling enters an infinite loop when trying to model code
that has unreachable instructions (e.g.,
test/ScopInfo/BoundChecks/single-loop.ll), as the number of basic blocks
returned by the LLVM Loop* does not include unreachable basic blocks that
branch off from the core loop body. This arises for example in the following
piece of code:
for (i = 0; i < N; i++) {
if (i > 1024)
abort(); <- this abort might be translated to an
unreachable
A[i] = ...
}
This patch adds these unreachable basic blocks in our per loop basic block
count to ensure that the schedule construction does not assume a loop has been
processed completely, despite certain unreachable basic blocks still remaining.
The infinite loop is only observable in combination with
https://reviews.llvm.org/D12676 or a similar patch.
llvm-svn: 297156
Ahmed Bougacha