Commit Graph

22 Commits

Author SHA1 Message Date
Manman Ren cc4e4d80fe Debug Info Verifier: enable verification of DICompileUnit.
We used to call Verify before adding DICompileUnit to the list, and now we
remove the check and always add DICompileUnit to the list in DebugInfoFinder,
so we can verify them later on.

llvm-svn: 187237
2013-07-26 20:04:30 +00:00
Manman Ren ed696c3dc1 Update testing cases to pass debug info verifier.
llvm-svn: 187083
2013-07-24 22:23:00 +00:00
Manman Ren 74c61b9c80 Debug Info: enable verifying by default and disable testing cases that fail.
1> Use DebugInfoFinder to find debug info MDNodes.
2> Add disable-debug-info-verifier to disable verifying debug info.
3> Disable verifying for testing cases that fail (will update the testing cases
   later on).
4> MDNodes generated by clang can have empty filename for TAG_inheritance and
   TAG_friend, so DIType::Verify is modified accordingly.

Note that DebugInfoFinder does not list all debug info MDNode.
For example, clang can generate:
metadata !{i32 786468}, which will fail to verify.
This MDNode is used by debug info but not included in DebugInfoFinder.
This MDNode is generated as a temporary node in DIBuilder::createFunction
  Value *TElts[] = { GetTagConstant(VMContext, DW_TAG_base_type) };
  MDNode::getTemporary(VMContext, TElts)

llvm-svn: 186634
2013-07-19 00:31:03 +00:00
David Blaikie f55abeaf4c Revert "Revert "PR14606: debug info imported_module support""
This reverts commit r179840 with a fix to test/DebugInfo/two-cus-from-same-file.ll

I'm not sure why that test only failed on ARM & MIPS and not X86 Linux, even
though the debug info was clearly invalid on all of them, but this ought to fix
it.

llvm-svn: 179996
2013-04-22 06:12:31 +00:00
Eric Christopher 0e89ade8ff Revert "PR14606: debug info imported_module support"
This reverts commit r179836 as it seems to have caused test failures.

llvm-svn: 179840
2013-04-19 07:47:16 +00:00
David Blaikie 88564f3cf7 PR14606: debug info imported_module support
Adding another CU-wide list, in this case of imported_modules (since they
should be relatively rare, it seemed better to add a list where each element
had a "context" value, rather than add a (usually empty) list to every scope).
This takes care of DW_TAG_imported_module, but to fully address PR14606 we'll
need to expand this to cover DW_TAG_imported_declaration too.

llvm-svn: 179836
2013-04-19 06:57:04 +00:00
David Blaikie 5692e72f30 Revert "Adding DIImportedModules to DIScopes."
This reverts commit 342d92c7a0adeabc9ab00f3f0d88d739fe7da4c7.

Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.

llvm-svn: 178215
2013-03-28 02:44:59 +00:00
David Blaikie a26d70358f Adding DIImportedModules to DIScopes.
This is just the basic groundwork for supporting DW_TAG_imported_module but I
wanted to commit this before pushing support further into Clang or LLVM so that
this rather churny change is isolated from the rest of the work. The major
churn here is obviously adding another field (within the common DIScope prefix)
to all DIScopes (files, classes, namespaces, lexical scopes, etc). This should
be the last big churny change needed for DW_TAG_imported_module/using directive
support/PR14606.

llvm-svn: 178099
2013-03-27 00:07:26 +00:00
David Blaikie f333dc9571 Reorder the DIFile field in DILexicalBlock to become a prefix common with other DIScopes
llvm-svn: 177703
2013-03-22 05:47:44 +00:00
David Blaikie cc8d090163 Remove unused field in DISubprogram
llvm-svn: 177661
2013-03-21 20:28:52 +00:00
David Blaikie 43a729d165 Remove unused field in DICompileUnit
llvm-svn: 177590
2013-03-20 22:34:33 +00:00
David Blaikie 200b6ed80f Refactor the DIFile (2nd) parameter to DITypes to be an MDNode reference to a raw directory/file pair
This makes DIType's first non-tag parameter the same as DIFile's, allowing them
to both share the common implementation of getFilename/getDirectory in DIScope.

llvm-svn: 177467
2013-03-20 00:26:26 +00:00
David Blaikie abec74b38e Move the DIFile operand to DITypes from the 4th operand to the 2nd.
This is another step along the way to making all DIScopes have a common prefix
which can be added to in a general manner to support using directives
(DW_TAG_imported_module).

llvm-svn: 177462
2013-03-19 23:25:22 +00:00
David Blaikie 8fb8224578 Split out filename & directory from DIFile to start generalizing over DIScopes
This is the first step to making all DIScopes have a common metadata prefix (so
that things (using directives, for example) that can appear in any scope can be
added to that common prefix). DIFile is itself a DIScope so the common prefix
of all DIScopes cannot be a DIFile - instead it's the raw filename/directory
name pair.

llvm-svn: 177239
2013-03-17 21:13:55 +00:00
David Blaikie 0d221159a0 Remove the unused 4th operand for DIFile debug info metadata
llvm-svn: 176983
2013-03-13 22:05:21 +00:00
David Blaikie 1ca2f36289 Refactor filename/directory in DICompileUnit into a DIFile
This is the next step towards making the metadata for DIScopes have a common
prefix rather than having to delegate based on their tag type.

llvm-svn: 176913
2013-03-13 00:01:35 +00:00
David Blaikie 452c3ff649 Remove unused "isMain" field from DICompileUnit
llvm-svn: 176910
2013-03-12 22:43:04 +00:00
David Blaikie a4f770d51c Update debug info test cases with empty SplitDebugFilename field.
This could be 'null' or the empty string, DIDescriptor::getStringField
coalesces the two cases anyway so it's just a matter of legible/efficient
representation.

The change in behavior of the DICompileUnit::get* functions could be
subsumed by the full verification check - but ideally that should just be an
assertion if we could front-load the actual debug info metadata failure paths.

llvm-svn: 176907
2013-03-12 22:25:36 +00:00
David Blaikie 47922fb006 Upgrading debug info test cases to be (more) compatible with the current debug info format.
These cases were found by further work to remove support for debug info
versioning. Common cleanups (other than changing the version info in the tag
field) included adding the last parameter to compile_units (recently added for
fission support) and other cases of trailing fields in lexical blocks, compile
units, and subprograms.

llvm-svn: 176834
2013-03-11 22:37:40 +00:00
David Blaikie e5a2f704a4 Upgrade tests to the latest debug info format.
Mostly this is just changing the named metadata (llvm.dbg.sp, llvm.dbg.gv,
llvm.dbg.<func>.lv, etc -> llvm.dbg.cu), adding a few fields to older records
(DIVariable: flags/inlined-at, DICompileUnit: sp/gv/types,
DISubprogram: local variables list)

The tests to update were discovered by a change I'm working on to remove debug
info version support - so any tests using old debug info versions I haven't
updated probably are bad tests or just not actually designed to test debug
info.

llvm-svn: 176671
2013-03-08 00:23:31 +00:00
NAKAMURA Takumi 29ccdd8207 Dwarf: [PR11022] Fix emitting DW_AT_const_value(>i64), to be host-endian-neutral.
Don't assume APInt::getRawData() would hold target-aware endianness nor host-compliant endianness. rawdata[0] holds most lower i64, even on big endian host.

FIXME: Add a testcase for big endian target.

FIXME: Ditto on CompileUnit::addConstantFPValue() ?
llvm-svn: 143194
2011-10-28 14:12:22 +00:00
Devang Patel f071d72c44 Handle debug info for i128 constants.
llvm-svn: 133821
2011-06-24 20:46:11 +00:00