Summary:
float_cast_overflow is the only UBSan check without a source location attached.
This patch propagates SourceLocations where necessary to get them to the
EmitCheck() call.
Reviewers: rsmith, ABataev, rjmccall
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D11757
llvm-svn: 244568
OpenMP 4.1 allows to use variables with reference types in private clauses and, therefore, in init expressions of the cannonical loop forms.
llvm-svn: 244209
The next code is generated for this construct:
```
if (__kmpc_cancellationpoint(ident_t *loc, kmp_int32 global_tid, kmp_int32 cncl_kind) != 0)
<exit from outer innermost construct>;
```
llvm-svn: 241239
If task directive has associated 'depend' clause then function kmp_int32 __kmpc_omp_task_with_deps ( ident_t *loc_ref, kmp_int32 gtid, kmp_task_t * new_task, kmp_int32 ndeps, kmp_depend_info_t *dep_list,kmp_int32 ndeps_noalias, kmp_depend_info_t *noalias_dep_list) must be called instead of __kmpc_omp_task().
If this directive has associated 'if' clause then also before a call of kmpc_omp_task_begin_if0() a function void __kmpc_omp_wait_deps ( ident_t *loc_ref, kmp_int32 gtid, kmp_int32 ndeps, kmp_depend_info_t *dep_list, kmp_int32 ndeps_noalias, kmp_depend_info_t *noalias_dep_list) must be called.
Array sections are not supported yet.
llvm-svn: 240532
Parsing and sema analysis (without support for array sections in arguments) for 'depend' clause (used in 'task' directive, OpenMP 4.0).
llvm-svn: 240409
Added parsing, sema analysis and codegen for '#pragma omp taskgroup' directive (OpenMP 4.0).
The code for directive is generated the following way:
#pragma omp taskgroup
<body>
void __kmpc_taskgroup(<loc>, thread_id);
<body>
void __kmpc_end_taskgroup(<loc>, thread_id);
llvm-svn: 240011
Added codegen for combined 'omp for simd' directives, that is a combination of 'omp for' directive followed by 'omp simd' directive. Includes support for all clauses.
llvm-svn: 239990
The following code is generated for reduction clause within 'omp simd' loop construct:
#pragma omp simd reduction(op:var)
for (...)
<body>
alloca priv_var
priv_var = <initial reduction value>;
<loop_start>:
<body> // references to original 'var' are replaced by 'priv_var'
<loop_end>:
var op= priv_var;
llvm-svn: 239881
Previously the last iteration for simd loop-based OpenMP constructs were generated as a separate code. This feature is not required and codegen is simplified.
llvm-svn: 239810
If loop control variable in a worksharing construct is marked as lastprivate, we should copy last calculated value of private counter back to original variable.
llvm-svn: 237879
This modification generates proper copyin/initialization sequences for array variables/parameters. Before they were considered as pointers, not arrays.
llvm-svn: 237691
'schedule' clause for combined directives requires additional processing. Special helper variable is generated, that is captured in the outlined parallel region for 'parallel for' region. This captured variable is used to store chunk expression from the 'schedule' clause in this 'parallel for' region.
llvm-svn: 237100
Inner bodies of OpenMP worksharing loop-based constructs with dynamic or guided scheduling are allowed to be marked with !llvm.mem.parallel_loop_access metadata for better optimization. Worksharing constructs with static scheduling cannot be marked this way (according to OpenMP standard "A data dependence between the same logical iterations in two such loops is guaranteed").
Constructs with auto and runtime scheduling are also not marked because automatically chosen scheduling may be static also.
Differential Revision: http://reviews.llvm.org/D9518
llvm-svn: 236693
For tasks codegen for private/firstprivate variables are different rather than for other directives.
1. Build an internal structure of privates for each private variable:
struct .kmp_privates_t. {
Ty1 var1;
...
Tyn varn;
};
2. Add a new field to kmp_task_t type with list of privates.
struct kmp_task_t {
void * shareds;
kmp_routine_entry_t routine;
kmp_int32 part_id;
kmp_routine_entry_t destructors;
.kmp_privates_t. privates;
};
3. Create a function with destructors calls for all privates after end of task region.
kmp_int32 .omp_task_destructor.(kmp_int32 gtid, kmp_task_t *tt) {
~Destructor(&tt->privates.var1);
...
~Destructor(&tt->privates.varn);
return 0;
}
4. Perform initialization of all firstprivate fields (by simple copying for POD data, copy constructor calls for classes) + provide address of a destructor function after kmpc_omp_task_alloc() and before kmpc_omp_task() calls.
kmp_task_t *new_task = __kmpc_omp_task_alloc(ident_t *, kmp_int32 gtid, kmp_int32 flags, size_t sizeof_kmp_task_t, size_t sizeof_shareds, kmp_routine_entry_t *task_entry);
CopyConstructor(new_task->privates.var1, *new_task->shareds.var1_ref);
new_task->shareds.var1_ref = &new_task->privates.var1;
...
CopyConstructor(new_task->privates.varn, *new_task->shareds.varn_ref);
new_task->shareds.varn_ref = &new_task->privates.varn;
new_task->destructors = .omp_task_destructor.;
kmp_int32 __kmpc_omp_task(ident_t *, kmp_int32 gtid, kmp_task_t *new_task)
Differential Revision: http://reviews.llvm.org/D9370
llvm-svn: 236479
For tasks codegen for private/firstprivate variables are different rather than for other directives.
1. Build an internal structure of privates for each private variable:
struct .kmp_privates_t. {
Ty1 var1;
...
Tyn varn;
};
2. Add a new field to kmp_task_t type with list of privates.
struct kmp_task_t {
void * shareds;
kmp_routine_entry_t routine;
kmp_int32 part_id;
kmp_routine_entry_t destructors;
.kmp_privates_t. privates;
};
3. Create a function with destructors calls for all privates after end of task region.
kmp_int32 .omp_task_destructor.(kmp_int32 gtid, kmp_task_t *tt) {
~Destructor(&tt->privates.var1);
...
~Destructor(&tt->privates.varn);
return 0;
}
4. Perform default initialization of all private fields (no initialization for POD data, default constructor calls for classes) + provide address of a destructor function after kmpc_omp_task_alloc() and before kmpc_omp_task() calls.
kmp_task_t *new_task = __kmpc_omp_task_alloc(ident_t *, kmp_int32 gtid, kmp_int32 flags, size_t sizeof_kmp_task_t, size_t sizeof_shareds, kmp_routine_entry_t *task_entry);
DefaultConstructor(new_task->privates.var1);
new_task->shareds.var1_ref = &new_task->privates.var1;
...
DefaultConstructor(new_task->privates.varn);
new_task->shareds.varn_ref = &new_task->privates.varn;
new_task->destructors = .omp_task_destructor.;
kmp_int32 __kmpc_omp_task(ident_t *, kmp_int32 gtid, kmp_task_t *new_task)
Differential Revision: http://reviews.llvm.org/D9322
llvm-svn: 236207
Emit the following code for 'taskwait' directive within tied task:
call i32 @__kmpc_omp_taskwait(<loc>, i32 <thread_id>);
Differential Revision: http://reviews.llvm.org/D9245
llvm-svn: 235836
Emit a code for reduction clause. Next code should be emitted for reductions:
static kmp_critical_name lock = { 0 };
void reduce_func(void *lhs[<n>], void *rhs[<n>]) {
*(Type0*)lhs[0] = ReductionOperation0(*(Type0*)lhs[0], *(Type0*)rhs[0]);
...
*(Type<n>-1*)lhs[<n>-1] =
ReductionOperation<n>-1(*(Type<n>-1*)lhs[<n>-1],
*(Type<n>-1*)rhs[<n>-1]);
}
...
void *RedList[<n>] = {&<RHSExprs>[0], ..., &<RHSExprs>[<n>-1]};
switch (__kmpc_reduce{_nowait}(<loc>, <gtid>, <n>, sizeof(RedList), RedList, reduce_func, &<lock>)) {
case 1:
<LHSExprs>[0] = ReductionOperation0(*<LHSExprs>[0], *<RHSExprs>[0]);
...
<LHSExprs>[<n>-1] = ReductionOperation<n>-1(*<LHSExprs>[<n>-1], *<RHSExprs>[<n>-1]);
__kmpc_end_reduce{_nowait}(<loc>, <gtid>, &<lock>);
break;
case 2:
Atomic(<LHSExprs>[0] = ReductionOperation0(*<LHSExprs>[0], *<RHSExprs>[0]));
...
Atomic(<LHSExprs>[<n>-1] = ReductionOperation<n>-1(*<LHSExprs>[<n>-1], *<RHSExprs>[<n>-1]));
break;
default:;
}
Reduction variables are a kind of a private variables, they have private copies, but initial values are chosen in accordance with the reduction operation.
If sections directive has only single section, then original shared variables are used instead with barrier at the end of the directive.
Differential Revision: http://reviews.llvm.org/D9242
llvm-svn: 235835
#pragma omp sections lastprivate(<var>)
<BODY>;
This construct is translated into something like:
<last_iter> = alloca i32
<init for lastprivates>;
<last_iter> = 0
; No initializer for simple variables or a default constructor is called for objects.
; For arrays perform element by element initialization by the call of the default constructor.
...
OMP_FOR_START(...,<last_iter>, ..); sets <last_iter> to 1 if this is the last iteration.
<BODY>
...
OMP_FOR_END
if (<last_iter> != 0) {
<final copy for lastprivate>; Update original variable with the lastprivate value.
}
call __kmpc_cancel_barrier() ; an implicit barrier to avoid possible data race.
If there is only one section, there is no special code generation, original shared variables are used + barrier is emitted at the end of the directive.
Differential Revision: http://reviews.llvm.org/D9240
llvm-svn: 235834
If there are 2 or more sections in a 'section' directive the following code is generated:
<default init for privates>
@__kmpc_for_static_init_4();
<BODY for sections directive>
@__kmpc_for_static_fini()
If there is only one section, the following code is generated:
if (@__kmpc_single()) {
<default init for privates>
@__kmpc_end_single();
}
Differential Revision: http://reviews.llvm.org/D9239
llvm-svn: 235833
Emit the following code for 'single' directive with 'private' clause:
if (@__kmpc_single()) {
<default init for privates>
@__kmpc_end_single();
}
Differential Revision: http://reviews.llvm.org/D9238
llvm-svn: 235832
Emit the following code for 'single' directive with 'firtstprivate' clause:
if (@__kmpc_single()) {
<init for firstprivates>
@__kmpc_end_single();
}
@__kmpc_cancel_barrier(); // To avoid data race in firstprivate init
Differential Revision: http://reviews.llvm.org/D9223
llvm-svn: 235694
Runtime function for 'copyprivate' directive generates implicit barriers, so no need to emit it.
Differential Revision: http://reviews.llvm.org/D9215
llvm-svn: 235692
If there are 2 or more sections in a 'section' directive the following code is generated:
<init for firstprivates>
@__kmpc_cancel_barrier();// To avoid data race in firstprivate init
@__kmpc_for_static_init_4();
<BODY for sections directive>
@__kmpc_for_static_fini()
If there is only one section, the following code is generated:
if (@__kmpc_single()) {
<init for firstprivates>
@__kmpc_end_single();
}
@__kmpc_cancel_barrier(); // To avoid data race in firstprivate init
Differential Revision: http://reviews.llvm.org/D9214
llvm-svn: 235691
The RegionCounter type does a lot of legwork, but most of it is only
meaningful within the implementation of CodeGenPGO. The uses elsewhere
in CodeGen generally just want to increment or read counters, so do
that directly.
llvm-svn: 235664
Adds codegen for 'atomic capture' constructs with the following forms of expressions/statements:
v = x binop= expr;
v = x++;
v = ++x;
v = x--;
v = --x;
v = x = x binop expr;
v = x = expr binop x;
{v = x; x = binop= expr;}
{v = x; x++;}
{v = x; ++x;}
{v = x; x--;}
{v = x; --x;}
{x = x binop expr; v = x;}
{x binop= expr; v = x;}
{x++; v = x;}
{++x; v = x;}
{x--; v = x;}
{--x; v = x;}
{x = x binop expr; v = x;}
{x = expr binop x; v = x;}
{v = x; x = expr;}
If x and expr are integer and binop is associative or x is a LHS in a RHS of the assignment expression, and atomics are allowed for type of x on the target platform atomicrmw instruction is emitted.
Otherwise compare-and-swap sequence is emitted.
Update of 'v' is not required to be be atomic with respect to the read or write of the 'x'.
bb:
...
atomic load <x>
cont:
<expected> = phi [ <x>, label %bb ], [ <new_failed>, %cont ]
<desired> = <expected> binop <expr>
<res> = cmpxchg atomic &<x>, desired, expected
<new_failed> = <res>.field1;
br <res>field2, label %exit, label %cont
exit:
atomic store <old/new x>, <v>
...
Differential Revision: http://reviews.llvm.org/D9049
llvm-svn: 235573
If condition evaluates to true, the code executes task by calling @__kmpc_omp_task() runtime function.
If condition evaluates to false, the code executes serial version of the code by executing the following code:
call void @__kmpc_omp_task_begin_if0(<loc>, <threadid>, <task_t_ptr, returned by @__kmpc_omp_task_alloc()>);
proxy_task_entry(<gtid>, <task_t_ptr, returned by @__kmpc_omp_task_alloc()>);
call void @__kmpc_omp_task_complete_if0(<loc>, <threadid>, <task_t_ptr, returned by @__kmpc_omp_task_alloc()>);
Also it checks if the condition is constant and if it is constant it evaluates its value and then generates either parallel version of the code (if the condition evaluates to true), or the serial version of the code (if the condition evaluates to false).
Differential Revision: http://reviews.llvm.org/D9143
llvm-svn: 235507
Filipe Cabecinhas