This patch reapplies r301309 with the fix to the MIR test to fix the assertion
triggered by r301309. Had trimmed a little bit too much from the MIR!
llvm-svn: 301317
Summary: No test case since I'm not aware of an in-tree target that needs this.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32398
llvm-svn: 301311
This patch fixes a bug with the updating of DBG_VALUE's in
BreakAntiDependencies. Previously, it would only attempt to update the first
DBG_VALUE following the instruction whose register is being changed,
potentially leaving DBG_VALUE's referring to the wrong register. Now the code
will update all DBG_VALUE's that immediately follow the instruction.
This issue was detected as a result of an optimized codegen difference with
"-g" where an X86 byte/word fixup was not performed due to a DBG_VALUE
referencing the wrong register.
Differential Revision: https://reviews.llvm.org/D31755
llvm-svn: 301309
1. RegisterClass::getSize() is split into two functions:
- TargetRegisterInfo::getRegSizeInBits(const TargetRegisterClass &RC) const;
- TargetRegisterInfo::getSpillSize(const TargetRegisterClass &RC) const;
2. RegisterClass::getAlignment() is replaced by:
- TargetRegisterInfo::getSpillAlignment(const TargetRegisterClass &RC) const;
This will allow making those values depend on subtarget features in the
future.
Differential Revision: https://reviews.llvm.org/D31783
llvm-svn: 301221
When functions are terminated by unreachable instructions, the last
instruction might trigger a CFI instruction to be generated. However,
emitting it would be be illegal since the function (and thus the FDE
the CFI is in) has already ended with the previous instruction.
Darwin's dwarfdump --verify --eh-frame complains about this and the
specification supports this.
Relevant bits from the DWARF 5 standard (6.4 Call Frame Information):
"[The] address_range [field in an FDE]: The number of bytes of
program instructions described by this entry."
"Row creation instructions: [...]
The new location value is always greater than the current one."
The first quotation implies that a CFI cannot describe a target
address outside of the enclosing FDE's range.
rdar://problem/26244988
Differential Revision: https://reviews.llvm.org/D32246
llvm-svn: 301219
Currently the operand type for ATOMIC_FENCE assumes value type of a pointer in address space 0.
This is fine for most targets. However for amdgcn target, the size of pointer in address space 0
depends on triple environment. For amdgiz environment, it is 64 bit but for other environment it is
32 bit. On the other hand, amdgcn target expects 32 bit fence operands independent of the target
triple environment. Therefore a hook is need in target lowering for getting the fence operand type.
This patch has no effect on targets other than amdgcn.
Differential Revision: https://reviews.llvm.org/D32186
llvm-svn: 301215
While we use BaseIndexOffset in FindBetterNeighborChains to
appropriately realize they're almost the same address and should be
improved concurrently we do not use it in isAlias using the non-index
understanding FindBaseOffset instead. Adding a BaseIndexOffset check
in isAlias like should allow indexed stores to be merged.
FindBaseOffset to be excised in subsequent patch.
Reviewers: jyknight, aditya_nandakumar, bogner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31987
llvm-svn: 301187
Treat them the same as the other binary operations that we have so far,
but on integers rather than floating point types. Extract the common
code into a helper.
This will be used in the ARM backend.
llvm-svn: 301163
This reverts commit r301105, 4, 3 and 1, as a follow up of the previous
revert, which broke even more bots.
For reference:
Revert "[APInt] Use operator<<= where possible. NFC"
Revert "[APInt] Use operator<<= instead of shl where possible. NFC"
Revert "[APInt] Use ashInPlace where possible."
PR32754.
llvm-svn: 301111
Summary:
D30400 has enabled tADC and tSBC instructions to be unglued, thereby allowing CPSR to remain live between Thumb1 scheduling units.
Most Thumb1 instructions have an OptionalDef for CPSR; but the scheduler ignored the OptionalDefs, and could unwittingly insert a flag-setting instruction in between an ADDS and the corresponding ADC.
Reviewers: javed.absar, atrick, MatzeB, t.p.northover, jmolloy, rengolin
Reviewed By: javed.absar
Subscribers: rogfer01, efriedma, aemerson, rengolin, llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D31081
llvm-svn: 301106
getRawData exposes the internal type of the APInt class directly to its users. Ideally we wouldn't expose such an implementation detail.
This patch fixes a few of the easy cases by using truncate, extract, or a rotate.
llvm-svn: 301105
Summary:
Some targets need to be able to do more complex rendering than just adding an
operand or two to an instruction. For example, it may need to insert an
instruction to extract a subreg first, or it may need to perform an operation
on the operand.
In SelectionDAG, targets would create SDNode's to achieve the desired effect
during the complex pattern predicate. This worked because SelectionDAG had a
form of garbage collection that would take care of SDNode's that were created
but not used due to a later predicate rejecting a match. This doesn't translate
well to GlobalISel and the churn was wasteful.
The API changes in this patch enable GlobalISel to accomplish the same thing
without the waste. The API is now:
InstructionSelector::OptionalComplexRendererFn selectArithImmed(MachineOperand &Root) const;
where Root is the root of the match. The return value can be omitted to
indicate that the predicate failed to match, or a function with the signature
ComplexRendererFn can be returned. For example:
return OptionalComplexRendererFn(
[=](MachineInstrBuilder &MIB) { MIB.addImm(Immed).addImm(ShVal); });
adds two immediate operands to the rendered instruction. Immed and ShVal are
captured from the predicate function.
As an added bonus, this also reduces the amount of information we need to
provide to GIComplexOperandMatcher.
Depends on D31418
Reviewers: aditya_nandakumar, t.p.northover, qcolombet, rovka, ab, javed.absar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31761
llvm-svn: 301079
In dwo files the fixed offset can be used - if the dwos are linked into
a dwp, the dwo consumer must use the dwp tables to find out where the
original range of the debug_info was and resolve the "section relative"
value relative to that original range - effectively
avoiding/reimplementing the relocation handling.
llvm-svn: 301072
Since Split DWARF needs to name the actual .dwo file that is generated,
it can't be known at the time the llvm::Module is produced as it may be
merged with other Modules before the object is generated and that object
may be generated with any name.
By passing the Split DWARF file name when LLVM is producing object code
the .dwo file name in the object file can match correctly.
The support for Split DWARF for implicit modules remains the same -
using metadata to store the dwo name and dwo id so that potentially
multiple skeleton CUs referring to different dwo files can be generated
from one llvm::Module.
llvm-svn: 301062
In addition to the original commit, tighten the condition for when to
pad empty functions to COFF Windows. This avoids running into problems
when targeting e.g. Win32 AMDGPU, which caused test failures when this
was committed initially.
llvm-svn: 301047
Empty functions can lead to duplicate entries in the Guard CF Function
Table of a binary due to multiple functions sharing the same RVA,
causing the kernel to refuse to load that binary.
We had a terrific bug due to this in Chromium.
It turns out we were already doing this for Mach-O in certain
situations. This patch expands the code for that in
AsmPrinter::EmitFunctionBody() and renames
TargetInstrInfo::getNoopForMachoTarget() to simply getNoop() since it
seems it was used for not just Mach-O anyway.
Differential Revision: https://reviews.llvm.org/D32330
llvm-svn: 301040
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
This recommits r300932 and r300930, which was causing dag-combine to
loop forever. The problem was that optimizeLogicalImm was returning
true even when there was no change to the immediate node (which happened
when the immediate was all zeros or ones), which caused dag-combine to
push and pop the same node to the work list over and over again without
making any progress.
This commit fixes the bug by returning false early in optimizeLogicalImm
if the immediate is all zeros or ones. Also, it changes the code to
compare the immediate with 0 or Mask rather than calling
countPopulation.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 301019
It seems that r300930 was creating an infinite loop in dag-combine when
compling the following file:
MultiSource/Benchmarks/MiBench/consumer-typeset/z21.c
llvm-svn: 300940
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
This recommits r300913, which broke bots because I didn't fix a call to
ShrinkDemandedConstant in SIISelLowering.cpp after changing the APIs of
TargetLoweringOpt and TargetLowering.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 300930
immediate operands.
This commit adds an AArch64 dag-combine that optimizes code generation
for logical instructions taking immediate operands. The optimization
uses demanded bits to change a logical instruction's immediate operand
so that the immediate can be folded into the immediate field of the
instruction.
rdar://problem/18231627
Differential Revision: https://reviews.llvm.org/D5591
llvm-svn: 300913
Associate the version-when-defined with definitions of standard DWARF
constants. Identify the "vendor" for DWARF extensions.
Use this information to verify FORMs in .debug_abbrev are defined as
of the DWARF version specified in the associated unit.
Removed two tests that had specified DWARF v1 (which essentially does
not exist).
Differential Revision: http://reviews.llvm.org/D30785
llvm-svn: 300875
This enables use after free and uninit memory checking for memory
returned by a recycler. SelectionDAG currently relies on the opcode of a
free'd node being ISD::DELETED_NODE, so poke a hole in the asan poison
for SDNode opcodes. This means that we won't find some issues, but only
in SDag.
llvm-svn: 300868
This will become asan errors once the patch lands that poisons the
memory after free. The x86 change is a hack, but I don't see how to
solve this properly at the moment.
llvm-svn: 300867
Recently alloca address space has been added to data layout. Due to this
change, pointer returned by alloca may have different size as pointer in
address space 0.
However, currently the value type of frame index is assumed to be of the
same size as pointer in address space 0.
This patch fixes that.
Most targets assume alloca returning pointer in address space 0, which
is the default alloca address space. Therefore it is NFC for them.
AMDGCN target with amdgiz environment requires this change since it
assumes alloca returning pointer to addr space 5 and its size is 32,
which is different from the size of pointer in addr space 0 which is 64.
Differential Revision: https://reviews.llvm.org/D32021
llvm-svn: 300864
getSignBit is a static function that creates an APInt with only the sign bit set. getSignMask seems like a better name to convey its functionality. In fact several places use it and then store in an APInt named SignMask.
Differential Revision: https://reviews.llvm.org/D32108
llvm-svn: 300856
Sanjay Patel