Added assembler and disassembler support for the new Release
Consistent processor consistent instructions, introduced with ARM
v8.3-A for AArch64.
Differential Revision: https://reviews.llvm.org/D36522
llvm-svn: 310575
Summary:
Most CPUs implementing AES fusion require instruction pairs of the form
AESE Vn, _
AESMC Vn, Vn
and
AESD Vn, _
AESIMC Vn, Vn
The constraint is added to AES(I)MC instructions which use the result of
an AES(E|D) instruction by using AES(I)MCTrr pseudo instructions, which
constraint source and destination registers to be the same.
A nice side effect of this change is that now all possible pairs are
scheduled back-to-back on the exynos-m1 for the misched-fusion-aes.ll
test case.
I had to update aes_load_store. The version I added initially was very
reduced and with the new constraint, AESE/AESMC could not be scheduled
back-to-back. I updated the test to be more realistic and still expose
the same scheduling problem as the initial test case.
Reviewers: t.p.northover, rengolin, evandro, kristof.beyls, silviu.baranga
Reviewed By: t.p.northover, evandro
Subscribers: aemerson, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D35299
llvm-svn: 309495
TreePatternNode considers them to be plain integers but MachineInstr considers
them to be a distinct kind of operand.
The tweak to AArch64InstrInfo.td to produce a simple test case is a NFC for
everything except GlobalISelEmitter (confirmed by diffing the tablegenerated
files). GlobalISelEmitter is currently unable to infer the type of operands in
the Dst pattern from the operands in the Src pattern.
llvm-svn: 307634
This patch enables significant performance enhancements to the
Cavium ThunderX2T99 LLVM backend, as observed by running SPEC2K6,
by adding more detailed scheduling information.
Related Bugzilla bug: http://bugs.llvm.org/show_bug.cgi?id=32562
Patch by: steleman
Differential Revision: https://reviews.llvm.org/D31801
llvm-svn: 306462
- Remove all uses of base sched model entries and set them all to
Unsupported so all the opcodes are described in
AArch64SchedFalkorDetails.td.
- Remove entries for unsupported half-float opcodes.
- Remove entries for unsupported LSE extension opcodes.
- Add entry for MOVbaseTLS (and set Sched in base td file entry to
WriteSys) and a few other pseudo ops.
- Fix a few FP load/store with reg offset entries to use the LSLfast
predicates.
- Add Q size BIF/BIT/BSL entries.
- Fix swapped Q/D sized CLS/CLZ/CNT/RBIT entires.
- Fix pre/post increment address register latency (this operand is
always dest 0).
- Fix swapped FCVTHD/FCVTHS/FCVTDH/FCVTDS entries.
- Fix XYZ resource over usage on LD[1-4] opcodes.
llvm-svn: 304108
Summary:
This causes them to be re-computed more often than necessary but resolves
objections that were raised post-commit on r301750.
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls
Reviewed By: qcolombet
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32861
llvm-svn: 303418
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
Summary:
Predicate<> now has a field to indicate how often it must be recomputed.
Currently, there are two frequencies, per-module (RecomputePerFunction==0)
and per-function (RecomputePerFunction==1). Per-function predicates are
currently recomputed more frequently than necessary since the only predicate
in this category is cheap to test. Per-module predicates are now computed in
getSubtargetImpl() while per-function predicates are computed in selectImpl().
Tablegen now manages the PredicateBitset internally. It should only be
necessary to add the required includes.
Also fixed a problem revealed by the test case where
constrainSelectedInstRegOperands() would attempt to tie operands that
BuildMI had already tied.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32491
llvm-svn: 301750
Currently fmov #0 with a vector destination is handle incorrectly and results in
fmov #-1.9375 being emitted but should instead give an error. This is due to the
way we cope with fmov #0 with a scalar destination being an alias of fmov zr, so
fix this by actually doing it through an alias.
Differential Revision: https://reviews.llvm.org/D31949
llvm-svn: 300830
Summary:
Similar to the ARM target in https://reviews.llvm.org/rL298380, this
patch adds identical infrastructure for disabling negative immediate
conversions, and converts the existing aliases to the new infrastucture.
Reviewers: rengolin, javed.absar, olista01, SjoerdMeijer, samparker
Reviewed By: samparker
Subscribers: samparker, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D31243
llvm-svn: 298908
Among other things, this allows Machine LICM to hoist a costly 'mrs'
instruction from within a loop.
Differential Revision: http://reviews.llvm.org/D31151
llvm-svn: 298851
This patch checks the number of operands in the resulting
instruction instead of just the alias, then skips over
tied operands when generating the printing method.
This allows us to generate the preferred assembly syntax
for the AArch64 'ins' instruction, which should always be
displayed as 'mov' according to the ARMARM.
Several unit tests have changed as a result, but only to
reflect the preferred disassembly.
Some other InstAlias patterns (movk/bic/orr) needed a
slight adjustment to stop them becoming the default
and breaking other unit tests.
Patch by Graham Hunter.
Differential Revision: https://reviews.llvm.org/D29219
llvm-svn: 294437
ARM seems to prefer that long literals be formed from their little end in
order to promote the fusion of the instrs pairs MOV/MOVK and MOVK/MOVK on
Cortex A57 and others (v. "Cortex A57 Software Optimisation Guide", section
4.14).
Differential revision: https://reviews.llvm.org/D28697
llvm-svn: 292422
Falkor only partially implements the ARMv8.1a extensions, so this patch
refactors the support for the SQRDML[A|S]H instruction into a separate
feature.
Differential Revision: https://reviews.llvm.org/D28681
llvm-svn: 292142
Summary:
This is preparation for ThunderX processors that have Large
System Extension (LSE) atomic instructions, but not the
other instructions introduced by V8.1a.
This will mimic changes to GCC as described here:
https://gcc.gnu.org/ml/gcc-patches/2015-06/msg00388.html
LSE instructions are: LD/ST<op>, CAS*, SWP
Reviewers: t.p.northover, echristo, jmolloy, rengolin
Subscribers: aemerson, mehdi_amini
Differential Revision: https://reviews.llvm.org/D26621
llvm-svn: 288279
Implement the Newton series for square root, its reciprocal and reciprocal
natively using the specialized instructions in AArch64 to perform each
series iteration.
Differential revision: https://reviews.llvm.org/D26518
llvm-svn: 286907
Add support for estimating the square root or its reciprocal and division or
reciprocal using the combiner generic Newton series.
Differential revision: https://reviews.llvm.org/D25291
llvm-svn: 284986
Don't match the UXTW extended reg forms of ADD/ADDS/SUB/SUBS if the
32-bit to 64-bit zero-extend can be done for free by taking advantage
of the 32-bit defining instruction zeroing the upper 32-bits of the X
register destination. This enables better instruction selection in a
few cases, such as:
sub x0, xzr, x8
instead of:
mov x8, xzr
sub x0, x8, w9, uxtw
madd x0, x1, x1, x8
instead of:
mul x9, x1, x1
add x0, x9, w8, uxtw
cmp x2, x8
instead of:
sub x8, x2, w8, uxtw
cmp x8, #0
add x0, x8, x1, lsl #3
instead of:
lsl x9, x1, #3
add x0, x9, w8, uxtw
Reviewers: t.p.northover, jmolloy
Subscribers: mcrosier, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D24747
llvm-svn: 282413
This reverts commit b7d42b0048f65346e9fa37fb65defeea7ce8c337 per request by
Eric Christopher <echristo@gmail.com> (v. http://bit.ly/2cmz6kW).
llvm-svn: 282000
The names of the tablegen defs now match the names of the ISD nodes.
This makes the world a slightly saner place, as previously "fround" matched
ISD::FP_ROUND and not ISD::FROUND.
Differential Revision: https://reviews.llvm.org/D23597
llvm-svn: 279129
On CPUs with the zero cycle zeroing feature enabled "movi v.2d" should
be used to zero a vector register. This was previously done at
instruction selection time, however the register coalescer sometimes
widened multiple vregs to the Q width because of that leading to extra
spills. This patch leaves the decision on how to zero a register to the
AsmPrinter phase where it doesn't affect register allocation anymore.
This patch also sets isAsCheapAsAMove=1 on FMOVS0, FMOVD0.
This fixes http://llvm.org/PR27454, rdar://25866262
Differential Revision: http://reviews.llvm.org/D21826
llvm-svn: 274686
new instruction to ARM and AArch64 targets and several system registers.
Patch by: Roger Ferrer Ibanez and Oliver Stannard
Differential Revision: http://reviews.llvm.org/D20282
llvm-svn: 271670
Testing for specific CPUs has a number of problems, better use subtarget
features:
- When some tweak is added for a specific CPU it is often desirable for
the next version of that CPU as well, yet we often forget to add it.
- It is hard to keep track of checks scattered around the target code;
Declaring all target specifics together with the CPU in the tablegen
file is a clear representation.
- Subtarget features can be tweaked from the command line.
To discourage people from using CPU checks in the future I removed the
isCortexXX(), isCyclone(), ... functions. I added an getProcFamily()
function for exceptional circumstances but made it clear in the comment
that usage is discouraged.
Reformat feature list in AArch64.td to have 1 feature per line in
alphabetical order to simplify merging and sorting for out of tree
tweaks.
No functional change intended.
Differential Revision: http://reviews.llvm.org/D20762
llvm-svn: 271555
This patch adds support for estimating the square root, its reciprocal and
division or reciprocal using the combiner generic reciprocal machinery.
llvm-svn: 268539
This adds some missing generic schedule info definitions, enables
completeness checking for cyclone and fixes a typo uncovered by that.
Differential Revision: http://reviews.llvm.org/D17748
llvm-svn: 262393
During instruction selection, the AArch64 backend can recognise the
following pattern and generate an [U|S]MADDL instruction, i.e. a
multiply of two 32-bit operands with a 64-bit result:
(mul (sext i32), (sext i32))
However, when one of the operands is constant, the sign extension
gets folded into the constant in SelectionDAG::getNode(). This means
that the instruction selection sees this:
(mul (sext i32), i64)
...which doesn't match the pattern. Sign-extension and 64-bit
multiply instructions are generated, which are slower than one 32-bit
multiply.
Add a pattern to match this and generate the correct instruction, for
both signed and unsigned multiplies.
Patch by Chris Diamand!
llvm-svn: 259800
Since we only have pair - not single - nontemporal store instructions,
we have to extract the high part into a separate register to be able
to use them.
When the initial nontemporal codegen support was added, I wrote the
extract using the nonsensical UBFX [0,32[.
Use the correct LSR form instead.
llvm-svn: 259134
This patch adds to the target description two additional patterns for matching
extract-extend operations to SMOV. The patterns catch the v16i8-to-i64 and
v8i16-to-i64 cases. The existing patterns miss these cases because the
extracted elements must first be legalized to i32, resulting in any_extend
nodes.
This was originally implemented as a DAG combine (r255895), but was reverted
due to failing out-of-tree tests.
llvm-svn: 256176
After much discussion, ending here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151123/315620.html
it has been decided that, instead of having the vectorizer directly generate
special absdiff and horizontal-add intrinsics, we'll recognize the relevant
reduction patterns during CodeGen. Accordingly, these intrinsics are not needed
(the operations they represent can be pattern matched, as is already done in
some backends). Thus, we're backing these out in favor of the current
development work.
r248483 - Codegen: Fix llvm.*absdiff semantic.
r242546 - [ARM] Use [SU]ABSDIFF nodes instead of intrinsics for VABD/VABA
r242545 - [AArch64] Use [SU]ABSDIFF nodes instead of intrinsics for ABD/ABA
r242409 - [Codegen] Add intrinsics 'absdiff' and corresponding SDNodes for absolute difference operation
llvm-svn: 255387
These are redundant pairs of nodes defined for
INSERT_VECTOR_ELEMENT/EXTRACT_VECTOR_ELEMENT.
insertelement/extractelement are slightly closer to the corresponding
C++ node name, and has stricter type checking so prefer it.
Update targets to only use these nodes where it is trivial to do so.
AArch64, ARM, and Mips all have various type errors on simple replacement,
so they will need work to fix.
Example from AArch64:
def : Pat<(sext_inreg (vector_extract (v16i8 V128:$Rn), VectorIndexB:$idx), i8),
(i32 (SMOVvi8to32 V128:$Rn, VectorIndexB:$idx))>;
Which is trying to do sext_inreg i8, i8.
llvm-svn: 255359
Summary:
This fixes failure when trying to select
insertelement <4 x half> undef, half %a, i64 0
which gets transformed to a scalar_to_vector node.
The accompanying v4 and v8 tests fail instruction selection without this
patch.
Reviewers: ab, jmolloy
Subscribers: srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D15322
llvm-svn: 255072
ARMv8.2-A adds 16-bit floating point versions of all existing SIMD
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
Note that VFP without SIMD is not a valid combination for any version of
ARMv8-A, but I have ensured that these instructions all depend on both
FeatureNEON and FeatureFullFP16 for consistency.
The ".2h" vector type specifier is now legal (for the scalar pairwise
reduction instructions), so some unrelated tests have been modified as
different error messages are emitted. This is not a problem as the
invalid operands are still caught.
llvm-svn: 255010
The Statistical Profiling Extension is an optional extension to
ARMv8.2-A. Since it is an optional extension, I have added the
FeatureSPE subtarget feature to control it. The assembler-visible parts
of this extension are the new "psb csync" instruction, which is
equivalent to "hint #17", and a number of system registers.
Differential Revision: http://reviews.llvm.org/D15021
llvm-svn: 254401
This adds subtarget features for ARMv8.2-A, which builds on (and
requires the features from) ARMv8.1-A. Most assembler-visible features
of ARMv8.2-A are system instructions, and are all required parts of the
architecture, so just depend on the HasV8_2aOps subtarget feature. There
is also one large, optional feature, which adds 16-bit floating point
versions of all existing floating-point instructions (VFP and SIMD),
this is represented by the FeatureFullFP16 subtarget feature.
Differential Revision: http://reviews.llvm.org/D15013
llvm-svn: 254154
Summary:
This matches the sum-of-absdiff patterns emitted by the vectoriser using log2 shuffles.
Relies on D14207 to be able to match the `extract_subvector(..., 0)`
Reviewers: t.p.northover, jmolloy
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14208
llvm-svn: 252465
Summary:
Lowering this pattern early to an `EXTRACT_SUBREG` was making it impossible to match larger patterns in tblgen that use `extract_subvector(..., 0)` as part of the their input pattern.
It seems like there will exist somewhere a better way of specifying this pattern over all relevant register value types, but I didn't manage to find it.
Reviewers: t.p.northover, jmolloy
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14207
llvm-svn: 252464
"msr pan, #imm", while only 1-bit immediate values should be valid.
Changed encoding and decoding for msr pstate instructions.
Differential Revision: http://reviews.llvm.org/D13011
llvm-svn: 249313
The C standard has historically not specified whether or not these functions should raise the inexact flag. Traditionally on Darwin, these functions *did* raise inexact, and the llvm lowerings followed that conventions. n1778 (C bindings for IEEE-754 (2008)) clarifies that these functions should not set inexact. This patch brings the lowerings for arm64 and x86 in line with the newly specified behavior. This also lets us fold some logic into TD patterns, which is nice.
Differential Revision: http://reviews.llvm.org/D12969
llvm-svn: 248266
Sam Parker