Summary:
Since a full run of test-release.sh takes many hours (at least on my
poor systems), we might as well spend some extra time compressing the
tarball, in return for a quite a bit of gains for uploading and
downloading it.
As an example, the 10.0.0-rc4 .tar.xz tarball shrinks from 465MiB to
306MiB, about 52% smaller.
Reviewers: hans, tstellar, rovka
Reviewed By: hans
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76192
Summary:
Some of the regression tests, such as those for the various sanitizers,
use huge shadow memory maps (showing up in top as 20 TiB). If any of
those ever crashes, your test system's disk will be filled up until
everything falls over. Set the ulimit for core dumps to 0 to prevent
this problem.
Reviewers: hans, tstellar, rovka
Reviewed By: hans
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76191
Summary:
This also changes the test-release.sh script to build using the monorepo
layout instead of copying sub-projects into llvm/tools or llvm/projects.
Reviewers: jdoerfert, hans
Reviewed By: hans
Subscribers: hans, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70353
When trying to run test-release.sh on Solaris 11.4 for 9.0.0 rc4, I failed initially
because Solaris lacks chrpath. This patch accounts for that and allowed the run to
continue.
Tested on amd64-pc-solaris2.11 and sparcv9-sun-solaris2.11.
Differential Revision: https://reviews.llvm.org/D67484
llvm-svn: 371741
The comparison would otherwise fail if Phase2 occurrs naturally in the
object file. It would get replaced with Phase3 in the one .o, but not
in the other.
We were already running both files through sed to have them processed in
this same way; this is a logical extension of that.
llvm-svn: 367847
Allow the use of ninja instead of make. This is useful on some
platforms where we'd like to be able to limit the number of link jobs
without slowing down the other steps of the release.
This patch adds a -use-ninja command line option, which sets the
generator to Ninja both for LLVM and the test-suite. It also deals with
some differences between make and ninja:
* DESTDIR handling - ninja doesn't like this to be listed after the
target, but both make and ninja can handle it before the command
* Verbose mode - ninja uses -v, make uses VERBOSE=1
* Keep going mode - make has a -k mode, which builds as much as possible
even when failures are encountered; for ninja we need to set a hard
limit (we use 100 since most people won't look at 100 failures anyway)
I haven't tested with gmake.
llvm-svn: 353685
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
On FreeBSD, it is currently not possible to build libcxxabi and link
against it, so we have been building releases with -no-libs for quite
some time.
However, libcxx and libunwind should build without problems, so provide
an option to skip just libcxxabi.
llvm-svn: 322875
Summary:
We want to catch failures early before do the full 3 stage build.
The goal here is to avoid running through the whole build process and have
it fail at the end (and not create the binary packages), just because
some prerequisites failed to install.
Reviewers: rovka, hans
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36422
llvm-svn: 310939
Summary:
scudo_utils.cpp.o from compiler-rt has one of the host compiler's builtin
include paths stored in the .debug_line section. So we need to do
sed 's,Phase1,Phase2,g` on the Phase2 object file so it matches Phase3.
Reviewers: hans
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34989
llvm-svn: 308912
Summary: We were using the system compiler to run the test suite.
Reviewers: hansw
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34246
llvm-svn: 305525
Summary: We aren't actually building the test suite, so this isn't needed.
Reviewers: rengolin, hansw
Reviewed By: rengolin
Subscribers: rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D29840
llvm-svn: 305017
Building lld is enabled by default, but it can be disabled using the
-no-lld option.
Reviewers: tstellarAMD, rengolin, hans
Reviewed By: hans
Subscribers: grosser, wdng, emaste, llvm-commits
Differential Revision: https://reviews.llvm.org/D29539
llvm-svn: 294102
Summary:
As per the discussion on LLVM-dev this patch proposes removing LLVM_ENABLE_TIMESTAMPS.
The only complicated bit of this patch is the Windows support. On windows we used to log an error if /INCREMENTAL was passed to the linker when timestamps were disabled.
With this change since timestamps in code are always disabled we will always compile on windows with /Brepro unless /INCREMENTAL is specified, and we will log a warning when /INCREMENTAL is specified to notify the user that the build will be non-deterministic.
See: http://lists.llvm.org/pipermail/llvm-dev/2016-May/098990.html
Reviewers: bogner, silvas, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19892
llvm-svn: 268670
Summary:
r257791 disabled the test-suite export since the addition of CMakeLists.txt was
causing build failures. This patch exports the test-suite again but does so
outside the source tree so that it isn't included in the Phase[123] builds.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16679
llvm-svn: 259094
Here, sed is used to prepare object files for comparison via cmp. On my Darwin
15.4.0 machine, LC_CTYPE is set to UTF-8 (by default, I believe). Under these
circumstances, anything sed is made to read will be treated as UTF-8, prompting
it to signal an error if it is not, like so:
% sed s/a/b/ <(head -n1 /dev/random) >/dev/null; echo $?
sed: RE error: illegal byte sequence
1
%
To make sed work as expected, I need to set LC_CTYPE to C:
% env LC_CTYPE=C sed s/a/b/ <(head -n1 /dev/random) >/dev/null; echo $?
0
%
Without this change, sed will exit with an error for every single file that it
compares between phase 2 and phase 3, thereby making it look as if the
differences were far larger than they are.
Patch by Elias Pipping!
Differential Revision: http://reviews.llvm.org/D16548
llvm-svn: 258891
instead of using symlinks
Summary:
In the past I have run into several problems with the way
`test-release.sh` creates all the subproject directories as siblings,
and then uses symlinks to stitch them all together. In some scenarios
this leads to clang not being able to find header files, etc.
This patch changes the script so it directly exports into the correct
target locations for each subproject.
Reviewers: hans
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D16420
llvm-svn: 258436
Patch turns on OpenMP support in clang by default after fixing OpenMP buildbots.
Differential Revision: http://reviews.llvm.org/D13802
llvm-svn: 255222
While checking for the existence of the clang-tools-extra directory,
the script was not checking for its destination name, "extra", and
the script was failing when re-running without checking out new
sources.
llvm-svn: 243898
Summary:
Mips doesn't implement unw_getcontext() or libunwind::Registers_*::jumpto() yet
so we must disable libunwind for this release.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11563
llvm-svn: 243633
This isn't part of the official release process, but provides a convenient way
to build binaries for those who want to experiment with it. Hopefully the run-
time can be part of the regular build and release process for 3.8.
Differential Revision: http://reviews.llvm.org/D11494
llvm-svn: 243531
This makes the script run to the end and produce tarballs even on test
failures, and then highlights any errors afterwards.
(I first tried just storing the errors in a global variable, but that
didn't work as the "test_llvmCore" function invocation is actually
running as a sub-shell.)
Differential Revision: http://reviews.llvm.org/D11478
llvm-svn: 243116
Not all components build correctly on all targets and the release
script had no way to disable them other than editing the script locally.
This change provides a way to disable the test-suite, compiler-rt and
the libraries, as well as allowing you to re-run on the same directory
without checking out all sources again.
llvm-svn: 242919
If objects or executables did not contain any RPATH, grep would return
nonzero, and the whole stage comparison loop would unexpectedly exit.
Fix this by checking the grep result explicitly.
llvm-svn: 242722
Summary:
Adds '--svn-path BRANCH' that causes the script to export the specified path
from each project. Otherwise the tag specified by -release, -rc, etc. will be
used. The version portion of the package name will be 'test-$path' (any forward
slashes in the branch name are replaced with underscores), for example:
-svn-path trunk => clang+llvm-test-trunk-mips-linux-gnu.tar.xz
-svn-path branches/release_35 => clang+llvm-test-branches_release_35-mips-linux-gnu.tar.xz
This is primarily useful for bringing new release packages up to standard
without needing to create and maintain a tag for the purpose.
Reviewers: tstellarAMD, hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6563
llvm-svn: 242518
On some systems (e.g. Mac OS X), sed will add a newline to the end of
the output if there wasn't one already. This would cause false
cmp errors since the .o file from Phase 2 was passed through sed and
the one from Phase 3 wasn't. Work around this by passing both through
sed.
llvm-svn: 242341
It retains the possibility to use the autoconf build with a
command-line option ('-use-autoconf'), and uses that by default on Darwin since
compiler-rt requires it on that platform.
This commit also removes the "Release-64" flavour and related logic. The script
would previously do two builds unless the '-no-64bit' flag was passed, but on
my machine and from those I asked this always ended up producing two 64-bit builds,
causing much confusion.
It also removes the -build-triple option, which caused the --build= flag to
get passed to ./configure. This was presumably intended for cross-compiling,
but none of the release testers use it. If someone does want to pass it,
they can use '-configure-flags --build=foo' instead.
Differential Revision: http://reviews.llvm.org/D10715
llvm-svn: 242331
* Use the default install prefix (/usr/local) and use DESTDIR instead to
set a temporary install location for tarballing. This is the correct
way to package binary releases (otherwise the temporary install path
ends up in files in the binary release).
* Remove ``-disable-clang`` option. It did not work correctly
(tarballing assumed phase 3 was run) and when doing a release
we should always be doing a three-phased build and test.
Note: Technically we should only be using DESTDIR for the third phase
and use --prefix for the first and second phase because we run the built
clang from phase 1 and 2 (and in general an application's behaviour
may depend on the install prefix). However in the case of clang it
seems to not care what the install prefix was so to simplify the script
we use DESTDIR for all three stages.
llvm-svn: 242187
Brian Cain